AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

9Y-6982 CONTROL GP-GOVERNOR (CHG -00 THRU -02) REPLACED BY @@@@@ 4P-1561@@@@@ 3606 GEN SET ENGINE


FUEL SYSTEM
CONTROL GP-GOVERNOR
GOVERNOR GP
PUMP GP-FUEL INJECTION

GEN SET ENGINE 3606 GEN SET ENGINE 8RB
 3606 GENERATOR, INDUSTRIAL, LOCOMOTIVE, AND MARINE 8RB00001-UP SEBP3779 3606 8RB   (1986)

FUEL SYSTEM

CONTROL GP-GOVERNOR
7W-1443 CONTROL GP-GOVERNOR
7W-1444 CONTROL GP-GOVERNOR
9Y-6982 CONTROL GP-GOVERNOR
234-4356 MOUNTING GP-GOVERNOR CONTROL
 

#SEBP37792000
 

9Y-6982: CONTROL GP-GOVERNOR

9Y-6982 CONTROL GP-GOVERNOR (CHG -00 THRU -02)
REPLACED BY @@@@@ 4P-1561@@@@@
i00070009 SEBP3779
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  9Y-7599 [1] POTENTIOMETER  
 

#SEBP37792001
 

2W-0782: COVER GP-GOVERNOR

2W-0782 COVER GP-GOVERNOR (CHG -00)
LIMITER & PNEUMATIC SPEED SETTING
PART OF 124-3172, 2W-2848, 2W-2849, 2W-2850, 7C-6536, 7C-6623, 7C-7720 GOVERNOR GP
FIELD REPLACEMENT ORDER @@@@@124-3172@@@@@
i00069220 SEBP3779
2W0782 COVER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9S-4182 [1] PLUG (7/16-20-THD)  
2. 6V-5048 [1] SEAL-O-RING  
 

#SEBP37792002
 

1W-0832: DRIVE GP-GOVERNOR

1W-0832 DRIVE GP-GOVERNOR (CHG -07, -08)
Type 1
i00069192 SEBP3779
1W0832 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2W-1244 [1] PINION-GOVERNOR DRIVE  
2. 1W-0608 [1] WASHER-THRUST  
3. 1W-0603 [1] HOUSING AS-DRIVE  
4. 6V-3537 [2] DOWEL  
5. 1W-0604 [2] BUSHING  
6. 1W-0605 [2] PIN-HOUSING SIDE  
7. 7N-2043 [2] DOWEL  
8. 1W-0609 [1] WASHER-RETAINING  
9. 1W-0611 [1] SHIM (PACK)  
10. 0T-0573 [4] BOLT (3/8-16X2.75-IN)  
11. 9S-8007 [2] PLUG  
12. 5P-7813 [2] SEAL-O-RING  
13. 1W-0612 [1] COUPLING-GOVERNOR DRIVE  
14. 5S-9134 [1] SEAL-O-RING  
15. 6V-0973 [1] SEAL-O-RING  
16. 4W-6853 [1] GEAR-BEVEL (69 TEETH)  
17. 0S-1571 [6] BOLT (3/8-16X1.75-IN)  
18. 3P-0647 [4] SEAL-O-RING  
 

#SEBP37792003
 

1W-0832: DRIVE GP-GOVERNOR

1W-0832 DRIVE GP-GOVERNOR (CHG -09, -10)
Type 2
i00069193 SEBP3779
1W0832 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-1025 C [1] PINION (23-TEETH)  
2. 1W-0608 [1] WASHER-THRUST  
3. 1W-0603 [1] HOUSING AS-DRIVE  
4. 6V-3537 [2] DOWEL  
5. 1W-0604 [2] BUSHING  
6. 1W-0605 [2] PIN-HOUSING SIDE  
7. 7N-2043 [2] DOWEL  
8. 1W-0609 [1] WASHER-RETAINING  
9. 1W-0611 B [1] SHIM (PACK)  
10. 0S-1619 [4] BOLT (3/8-16X3-IN)  
11. 3P-0647 [4] SEAL-O-RING  
12. 0S-1571 [6] BOLT (3/8-16X1.75-IN)  
13. 1W-0612 [1] COUPLING-GOVERNOR DRIVE  
14. 5S-9134 [1] SEAL-O-RING  
15. 6V-0973 [1] SEAL-O-RING  
16. 9Y-1024 C [1] GEAR-BEVEL (69-TEETH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP37792004
 

2W-1242: DRIVE GP-GOVERNOR

2W-1242 DRIVE GP-GOVERNOR (CHG -03)
Type 1
i00069221 SEBP3779
2W1242 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-0610 [1] PINION-GOVERNOR DRIVE (33-TEETH)  
2. 1W-0608 [1] WASHER-THRUST  
3. 1W-0603 [1] HOUSING AS-DRIVE  
4. 6V-3537 [2] DOWEL  
5. 1W-0604 [2] BUSHING  
6. 1W-0605 [2] PIN-HOUSING SIDE  
7. 7N-2043 [2] DOWEL  
8. 1W-0609 [1] WASHER-RETAINING  
9. 1W-0611 B [1] SHIM (PACK)  
10. 0T-0573 [4] BOLT (3/8-16X2.75-IN)  
11. 9S-8007 [2] PLUG  
12. 5P-7813 [2] SEAL-O-RING  
13. 1W-0612 [1] COUPLING-GOVERNOR DRIVE  
14. 5S-9134 [1] SEAL-O-RING  
15. 6V-0973 [1] SEAL-O-RING  
16. 4W-6798 [1] GEAR-BEVEL (68-TEETH)  
17. 0S-1571 [6] BOLT (3/8-16X1.75-IN)  
18. 3P-0647 [4] SEAL-O-RING  
  B   USE AS REQUIRED
 

#SEBP37792005
 

2W-1242: DRIVE GP-GOVERNOR

2W-1242 DRIVE GP-GOVERNOR (CHG -04, -05)
Type 2
i00068994 SEBP3779
2W1242 DRIVE GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-1027 [1] PINION-GOVERNOR DRIVE (33-TEETH)  
2. 1W-0608 [1] WASHER-THRUST  
3. 1W-0603 [1] HOUSING AS-DRIVE  
4. 6V-3537 [2] DOWEL  
5. 1W-0604 [2] BUSHING  
6. 1W-0605 [2] PIN-HOUSING SIDE  
7. 7N-2043 [2] DOWEL  
8. 1W-0609 [1] WASHER-RETAINING  
9. 1W-0611 B [1] SHIM (PACK)  
10. 0T-0573 [4] BOLT (3/8-16X2.75-IN)  
11. 0S-1571 [6] BOLT (3/8-16X1.75-IN)  
12. 3P-0647 [4] SEAL-O-RING  
13. 1W-0612 [1] COUPLING-GOVERNOR DRIVE  
14. 5S-9134 [1] SEAL-O-RING  
15. 6V-0973 [1] SEAL-O-RING  
16. 9Y-1026 C [1] GEAR-BEVEL (68-TEETH)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP37792006
 

140-1766: FASTENER GP-FUEL INJ PUMP

140-1766 FASTENER GP-FUEL INJ PUMP (CHG -00, -00D1)
FOR USE WITH LVDT SENSOR UG ACTUATOR ASSEMBLY
i00165301 SEBP3779
1401766 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
2. 2W-0028 [1] LEVER  
3. 7X-7875 [1] ROD END  
4. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
5. 9Y-8490 [1] ROD  
6. 1S-3584 [1] NUT-FULL (3/8-24 LH-THD)  
7. 7X-7874 [1] ROD END  
8. 0S-1590 [1] BOLT (3/8-16X2-IN)  
9. 1W-7907 [1] LEVER  
10. 3V-3308 [7] WASHER-HARD (10.2X20.5X2.5-MM THK)  
11. 124-7374 [1] CONNECTOR AS (10-PIN)  
12. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
13. 0L-1143 [4] BOLT (3/8-16X2.5-IN)  
14. 4W-3938 [1] GASKET  
15. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
16. 9C-7035 [1] WASHER (19.8X38X1.5-MM THK)  
 

#SEBP37792007
 

4P-2361: FASTENER GP-FUEL INJ PUMP

4P-2361 FASTENER GP-FUEL INJ PUMP (CHG -00 THRU -03, -03D1)
i00069339 SEBP3779
4P2361 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
2. 3V-3308 [6] WASHER-HARD (10.2X20.5X2.5-MM THK)  
3. 4P-2362 [1] LEVER  
4. 4W-3938 [1] GASKET  
5. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
6. 4P-2363 [1] LEVER AS  
7. 0S-1590 [1] BOLT (3/8-16X2-IN)  
8. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
9. 7X-7874 [1] ROD END  
10. 1S-3584 [1] NUT-FULL (3/8-24 LH-THD)  
11. 4P-2364 [1] ROD  
12. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
13. 7X-7875 [1] ROD END  
14. 7E-4392 [1] COLLAR  
15. 0T-0065 [1] BOLT (3/8-16X3.5-IN)  
 

#SEBP37792008
 

4P-4048: FASTENER GP-FUEL INJ PUMP

4P-4048 FASTENER GP-FUEL INJ PUMP (CHG -00 THRU -05)
i00069363 SEBP3779
4P4048 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [4] BOLT (3/8-16X1-IN)  
2. 8T-7547 M [4] BOLT (M8X1.25X30-MM)  
3. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
4. 3V-3308 [4] WASHER-HARD (10.2X20.5X2.5-MM THK)  
5. 4P-3134 [1] LEVER  
6. 6V-5754 [2] PLUG  
7. 7X-7874 [1] ROD END  
8. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
9. 1S-3584 [1] NUT-FULL (3/8-24 LH-THD)  
10. 0S-1590 [1] BOLT (3/8-16X2-IN)  
11. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
12. 6V-0973 [1] SEAL-O-RING  
13. 5S-9134 [1] SEAL-O-RING  
14. 4P-4049 [1] ADAPTER-MOUNT  
15. 7C-8566 [1] LEVER  
16. 7X-7875 [1] ROD END  
17. 0S-2307 [1] SPACER (0.406X0.75X0.39-IN THK)  
18. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
19. 4P-4115 [1] ROD  
20. 7W-0592 [1] PLATE-THRUST  
21. 0S-1588 [6] BOLT (3/8-16X1.25-IN)  
22. 9X-9656 [1] PLUG AS-CONNECTOR (5-PIN)  
23. 9C-7035 [3] WASHER (19.8X38X1.5-MM THK)  
  M   METRIC PART
 

#SEBP37792009
 

4P-7032: FASTENER GP-FUEL INJ PUMP

4P-7032 FASTENER GP-FUEL INJ PUMP (CHG -00, -01)
i00069421 SEBP3779
4P7032 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3606 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
  9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
2. 2W-0028 [1] LEVER  
3. 7X-7875 [1] ROD END  
4. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
5. 9Y-8490 [1] ROD  
6. 1S-3584 [1] NUT-FULL (3/8-24 LH-THD)  
7. 7X-7874 [1] ROD END  
8. 0S-1590 [1] BOLT (3/8-16X2-IN)  
9. 1W-7907 [1] LEVER  
10. 3V-3308 [8] WASHER-HARD (10.2X20.5X2.5-MM THK)  
11. 7W-4993 [1] POINTER  
12. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
13. 0L-1143 [4] BOLT (3/8-16X2.5-IN)  
14. 4W-3938 [1] GASKET  
15. 9C-7035 [1] WASHER (19.8X38X1.5-MM THK)  
 

Information:

General Service Information
General Information
UG ACTUATOR
Installation
UG ACTUATOR
Operation & Maintenance
UG ACTUATOR
UG Actuator Operation
UG ACTUATOR
Specifications
UG ACTUATOR
General Information
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Electrostatic Discharge Awareness
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Installation
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Entering Control Set Points
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Initial Adjustments
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Description of Operation
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Troubleshooting
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Repair and Replacement
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Appendix A Programming Checklist (standard models)
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Appendix B Programming Checklist (9905-457)
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
701 Menu Summary (9905-457)
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
701 Menu Summary (standard models)
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
701 Control Specifications
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
General Information
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Electrostatic Discharge Awareness
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Installation
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Entering Control Set Points
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Initial Adjustments
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Description of Operation
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Troubleshooting
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Repair and Replacement
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Appendix Programming Checklist
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
721 Menu Summary
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
721 Control Specifications
WOODWARD 721 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Engine News
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Serviceable Parts For New Fuel Ratio Control; Pressurize Control To Set Rack
1987/05/01
New Procedures To Adjust Woodward EGB29P Governor/Actuator Linkage
1989/01/01
Improved 2301A Control Groups Used In Generator Set Applications
1990/09/01
New Procedure To Adjust Woodward EGB29P Governor/Actuator Linkage
1991/01/01
New Procedure To Adjust Woodward 3161 Governor Linkage
1991/01/01
Current Woodward EGB29P Actuator Assemblies Used On 3600 Diesel Engines{1716}
1998/03/01
3600 Engines Shipped With Oil in the Actuators{1265}
1998/10/01
New Woodward EGB13P Reverse Acting Actuator Assembly{1716}
1999/02/01
Woodward Hand Held Programmers (Control Programmers) Available For Use With Woodward 700 Series Controllers (Governor Control Groups){1930,1908}
1999/02/01
Reference For Springs For The Pneumatic Speed Control Setting On Woodward 3161 Governors {1915}
2001/07/01
Service Manuals Are Available For 723Plus Digital Speed Controls {1265, 1276}
2001/10/01
Operation and Maintenance Manual
Governor Actuator Linkage - Check
3600 Heavy Fuel Engines
Governor Actuator Oil Level - Check
3600 Heavy Fuel Engines
Engine Speed Governing
3600 Heavy Fuel Engines
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Operation of the Direct Fuel Control (Direct Rack){1265, 1276, 1926}
Operation of the Direct Fuel Control (Direct Rack){1265, 1276, 1926}
Service Magazine
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures{1259}
1977/08/08
New Procedures To Adjust Woodward EGB29P Governor/Actuator Linkage{1265}
1989/01/23
New Collar Used In Fuel Injection Control Groups{1298}
1989/09/18

Caterpillar Parts SIS Catalog 3606 :

7W-1444 CONTROL GP-GOVERNOR
7W-1443 CONTROL GP-GOVERNOR
7W-1442 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-8416 CONTROL GP-GOVERNOR
CONTROL GP-GOVERNOR
7E-8415 CONTROL GP-GOVERNOR
7C-8920 CONTROL GP-GOVERNOR
7C-7824 CONTROL GP-GOVERNOR
7C-7823 CONTROL GP-GOVERNOR
COVER GP-GOVERNOR
2W-0782 COVER GP-GOVERNOR
DRIVE GP-GOVERNOR
1W-0832 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
1W-0832 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
2W-1242 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
2W-1242 DRIVE GP-GOVERNOR
FASTENER GP-FUEL INJ PUMP
140-1766 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
4P-2361 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
4P-4048 FASTENER GP-FUEL INJ PUMP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.