AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

118-2482 CARTRIDGE GP-TURBOCHARGER (CHG -00 THRU -02) PART OF 101-9983, 118-2454, 4P-7010, 4P-7011, 4P-7012 TURBOCHARGER GP 3608


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

GEN SET ENGINE 3608 GEN SET ENGINE 6MC
 3608 GENERATOR, INDUSTRIAL, LOCOMOTIVE AND MARINE January 1998 to Current 6MC00001-UP SEBP3780 3608 6MC   (1986)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
116-2819 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
116-2820 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
118-2482 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
128-1062 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
128-1063 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
136-1605 CARTRIDGE GP-TURBOCHARGER
 

#SEBP37801370
 

118-2482: CARTRIDGE GP-TURBOCHARGER

118-2482 CARTRIDGE GP-TURBOCHARGER (CHG -00 THRU -02)
PART OF 101-9983, 118-2454, 4P-7010, 4P-7011, 4P-7012 TURBOCHARGER GP
i00070683 SEBP3780
1182482 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6772 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
2. 7W-0340 [1] WHEEL AS-COMPRESSOR  
3. 4W-8564 [1] RING-SEAL  
4. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
5. 4P-0372 [1] CONE-AIR  
6. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
7. 3B-4507 [9] LOCKWASHER  
8. 4W-7961 [1] COVER AS  
9. 4W-9032 [1] SEAL-O-RING  
10. 4P-0307 [1] DISC-COVER  
11. 118-2483 [1] SHAFT AS-TURBINE  
  4W-8564 [1] RING-SEAL  
12. 4W-9030 M [1] BOLT (M18X1.5X31-MM)  
  4W-8926 [1] WASHER (18.3X40X3.15-MM THK)  
13. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
14. 4W-9033 [1] SEAL-O-RING  
15. 4W-8683 [1] COVER AS  
16. 4W-9031 [1] SEAL-O-RING  
17. 4W-9293 [1] BEARING AS (TURBINE)  
18. 4W-8927 [1] BUSHING-TERMINAL  
19. 8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
20. 4W-8561 [1] BEARING AS-COMPRESSOR  
21. 4W-8928 [1] BUSHING-TERMINAL  
22. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
  3B-4504 [4] LOCKWASHER  
23. 130-0073 [1] HOUSING-BEARING  
24. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
25. 7C-3348 [1] BEARING-THRUST  
26. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP37801371
 

128-1062: CARTRIDGE GP-TURBOCHARGER

128-1062 CARTRIDGE GP-TURBOCHARGER (CHG -00)
PART OF 130-0243 TURBOCHARGER GP
i00070690 SEBP3780
1281062 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6772 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
2. 130-0231 [1] WHEEL AS-COMPRESSOR  
3. 4W-8564 [1] RING-SEAL  
4. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
5. 4P-0372 [1] CONE-AIR  
6. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
7. 3B-4507 [9] LOCKWASHER  
8. 4W-7961 [1] COVER AS  
9. 4W-9032 [1] SEAL-O-RING  
10. 4P-0307 [1] DISC-COVER  
11. 130-0061 [1] SHAFT AS-TURBINE  
  4W-8564 [1] RING-SEAL  
  4W-8926 [1] WASHER (18.3X40X3.15-MM THK)  
12. 4W-9030 M [1] BOLT (M18X1.5X31-MM)  
13. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
14. 4W-9033 [1] SEAL-O-RING  
15. 4W-8683 [1] COVER AS  
16. 4W-9031 [1] SEAL-O-RING  
17. 4W-9293 [1] BEARING AS (TURBINE)  
18. 4W-8927 [1] BUSHING-TERMINAL  
19. 8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
20. 129-9700 [1] BEARING AS-COMPRESSOR  
  130-1832 [1] SEAL-O-RING  
  130-1833 [1] SEAL-O-RING  
  130-1834 M [3] SCREW (M8X1.25X16-MM)  
21. 4W-8928 [1] BUSHING-TERMINAL  
22. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
23. 130-0073 [1] HOUSING-BEARING  
24. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
25. 129-9701 [1] BEARING-THRUST  
  M   METRIC PART
 

#SEBP37801372
 

128-1063: CARTRIDGE GP-TURBOCHARGER

128-1063 CARTRIDGE GP-TURBOCHARGER (CHG -01, -02)
PART OF 122-0350 TURBOCHARGER GP
i00067776 SEBP3780
1281063 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6772 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
2. 128-4762 [1] WHEEL AS-COMPRESSOR  
3. 4W-8564 [1] RING-SEAL  
4. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
5. 4P-0372 [1] CONE-AIR  
6. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
7. 3B-4507 [9] LOCKWASHER  
8. 4W-7961 [1] COVER AS  
9. 4W-9032 [1] SEAL-O-RING  
10. 4P-0307 [1] DISC-COVER  
11. 129-6355 [1] SHAFT AS-TURBINE  
  4W-8564 [1] RING-SEAL  
12. 4W-9030 M [1] BOLT (M18X1.5X31-MM)  
  4W-8926 [1] WASHER (18.3X40X3.15-MM THK)  
13. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
14. 4W-9033 [1] SEAL-O-RING  
15. 4W-8683 [1] COVER AS  
16. 4W-9031 [1] SEAL-O-RING  
17. 4W-9293 [1] BEARING AS (TURBINE)  
18. 4W-8927 [1] BUSHING-TERMINAL  
19. 8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
20. 129-9700 [1] BEARING AS-COMPRESSOR  
21. 4W-8928 [1] BUSHING-TERMINAL  
22. 130-1834 M [3] SCREW (M8X1.25X16-MM)  
23. 130-1833 [1] SEAL-O-RING  
24. 130-1832 [1] SEAL-O-RING  
25. 129-9702 [1] HOUSING-BEARING  
26. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
27. 129-9701 [1] BEARING-THRUST  
28. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
  1W-4795 F [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  7B-3028 F [4] SCREW-DRIVE (NO 4X 3/16-IN)  
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP37801373
 

136-1605: CARTRIDGE GP-TURBOCHARGER

136-1605 CARTRIDGE GP-TURBOCHARGER (CHG -00)
PART OF 122-0350 TURBOCHARGER GP
i00068277 SEBP3780
1361605 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6772 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
2. 136-1606 [1] WHEEL AS-COMPRESSOR  
3. 4W-8564 [1] RING-SEAL  
4. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
5. 4P-0372 [1] CONE-AIR  
6. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
7. 3B-4507 [9] LOCKWASHER  
8. 4W-7961 [1] COVER AS  
9. 4W-9032 [1] SEAL-O-RING  
10. 4P-0307 [1] DISC-COVER  
11. 129-6355 [1] SHAFT AS-TURBINE  
  4W-8564 [1] RING-SEAL  
12. 4W-9030 M [1] BOLT (M18X1.5X31-MM)  
  4W-8926 [1] WASHER (18.3X40X3.15-MM THK)  
13. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
14. 4W-9033 [1] SEAL-O-RING  
15. 4W-8683 [1] COVER AS  
16. 4W-9031 [1] SEAL-O-RING  
17. 4W-9293 [1] BEARING AS (TURBINE)  
18. 4W-8927 [1] BUSHING-TERMINAL  
19. 8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
20. 129-9700 [1] BEARING AS-COMPRESSOR  
21. 4W-8928 [1] BUSHING-TERMINAL  
22. 130-1834 M [3] SCREW (M8X1.25X16-MM)  
23. 130-1833 [1] SEAL-O-RING  
24. 130-1832 [1] SEAL-O-RING  
25. 129-9702 [1] HOUSING-BEARING  
26. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
27. 129-9701 [1] BEARING-THRUST  
28. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
  M   METRIC PART
 

#SEBP37801374
 

144-4001: CARTRIDGE GP-TURBOCHARGER

144-4001 CARTRIDGE GP-TURBOCHARGER (CHG -00)
PART OF 144-4000 TURBOCHARGER GP
i00852893 SEBP3780
1444001 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6772 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
2. 130-0073 [1] HOUSING-BEARING  
3. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
4. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
5. 4P-0372 [1] CONE-AIR  
6. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
7. 3B-4507 [9] LOCKWASHER  
8. 4W-7961 [1] COVER AS  
9. 4W-9032 [1] SEAL-O-RING  
10. 4P-0307 [1] DISC-COVER  
11. 7C-3348 [1] BEARING-THRUST  
12. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
13. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
14. 4W-9033 [1] SEAL-O-RING  
15. 4W-8683 [1] COVER AS  
16. 4W-9031 [1] SEAL-O-RING  
17. 4W-9293 [1] BEARING AS (TURBINE)  
18. 4W-8927 [1] BUSHING-TERMINAL  
19. 8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
20. 4W-8561 [1] BEARING AS-COMPRESSOR  
21. 4W-8928 [1] BUSHING-TERMINAL  
22. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
23. 3B-4504 [4] LOCKWASHER  
  M   METRIC PART
 

#SEBP37801375
 

150-2027: CARTRIDGE GP-TURBOCHARGER

150-2027 CARTRIDGE GP-TURBOCHARGER (CHG -00)
PART OF 150-2028 TURBOCHARGER GP
i00850213 SEBP3780
1502027 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6772 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
2. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
3. 7C-3348 [1] BEARING-THRUST  
4. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
5. 4P-0372 [1] CONE-AIR  
6. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
7. 3B-4507 [9] LOCKWASHER  
8. 4W-7961 [1] COVER AS  
9. 4W-9032 [1] SEAL-O-RING  
10. 4P-0307 [1] DISC-COVER  
11. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
12. 130-0073 [1] HOUSING-BEARING  
13. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
14. 4W-9033 [1] SEAL-O-RING  
15. 4W-8683 [1] COVER AS  
16. 4W-9031 [1] SEAL-O-RING  
17. 4W-9293 [1] BEARING AS (TURBINE)  
18. 4W-8927 [1] BUSHING-TERMINAL  
19. 8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
20. 4W-8561 [1] BEARING AS-COMPRESSOR  
21. 4W-8928 [1] BUSHING-TERMINAL  
22. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
  3B-4504 [4] LOCKWASHER  
  M   METRIC PART
 

#SEBP37801376
 

150-2033: CARTRIDGE GP-TURBOCHARGER

150-2033 CARTRIDGE GP-TURBOCHARGER (CHG -00)
PART OF 150-2030 TURBOCHARGER GP
i00860864 SEBP3780
1502033 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 100-6772 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
2. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
3. 7C-3348 [1] BEARING-THRUST  
4. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
5. 4P-0372 [1] CONE-AIR  
6. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
7. 3B-4507 [9] LOCKWASHER  
8. 4W-7961 [1] COVER AS  
9. 4W-9032 [1] SEAL-O-RING  
10. 4P-0307 [1] DISC-COVER  
11. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
12. 130-0073 [1] HOUSING-BEARING  
13. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
14. 4W-9033 [1] SEAL-O-RING  
15. 4W-8683 [1] COVER AS  
16. 4W-9031 [1] SEAL-O-RING  
17. 4W-9293 [1] BEARING AS (TURBINE)  
18. 4W-8927 [1] BUSHING-TERMINAL  
19. 8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
20. 4W-8561 [1] BEARING AS-COMPRESSOR  
21. 4W-8928 [1] BUSHING-TERMINAL  
22. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
  3B-4504 [4] LOCKWASHER  
  M   METRIC PART
 

#SEBP37801377
 

163-6433: CARTRIDGE GP-TURBOCHARGER

163-6433 CARTRIDGE GP-TURBOCHARGER (CHG -00 THRU -06)
PART OF 147-8470, 258-2290 TURBOCHARGER GP
i01189504 SEBP3780
1636433 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
3. 163-6439 Y [1] BEARING GP-COMPRESSOR  
4. 163-6446 Y [1] BEARING GP-TURBINE  
5. 164-5339 [1] HOUSING  
6. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
7. 163-5495 [6] WASHER (10.38X17.9X3.4-MM THK)  
8. 164-4974 [3] SEAL-O-RING  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4978 [2] SEAL-RING (TURBINE)  
11. 164-4980 [1] SEAL-RING (COMPRESSOR)  
12. 164-4982 [1] SEAL-PLATE  
13. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
14. 273-2102 [1] BEARING-THRUST  
15. 164-5341 [1] WHEEL-COMPRESSOR  
16. 164-5342 [1] SHAFT-TURBINE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801378
 

178-5270: CARTRIDGE GP-TURBOCHARGER

178-5270 CARTRIDGE GP-TURBOCHARGER (CHG -00)
PART OF 176-3598 TURBOCHARGER GP
i01164825 SEBP3780
1785270 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 100-6772 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
3. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
4. 4P-0372 [1] CONE-AIR  
5. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
6. 3B-4507 [9] LOCKWASHER  
7. 4W-7961 [1] COVER AS  
  4W-9032 [1] SEAL-O-RING  
8. 4P-0307 [1] DISC-COVER  
9. 7B-3028 [4] SCREW-DRIVE (NO 4X 3/16-IN)  
10. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
11. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
12. 4W-9033 [1] SEAL-O-RING  
13. 4W-8683 [1] COVER AS  
  4W-9031 [1] SEAL-O-RING  
14. 129-9701 [1] BEARING-THRUST  
15. 4W-9293 [1] BEARING AS (TURBINE)  
  4W-8927 [1] BUSHING-TERMINAL  
  8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
16. 129-9700 [1] BEARING AS-COMPRESSOR  
  4W-8928 [1] BUSHING-TERMINAL  
  130-1832 [1] SEAL-O-RING  
  130-1833 [1] SEAL-O-RING  
  130-1834 M [3] SCREW (M8X1.25X16-MM)  
17. 129-9702 [1] HOUSING-BEARING  
18. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
  M   METRIC PART
 

#SEBP37801379
 

194-8705: CARTRIDGE GP-TURBOCHARGER

194-8705 CARTRIDGE GP-TURBOCHARGER (CHG -00, -01)
PART OF 194-8722 TURBOCHARGER GP
Type 1
i01485284 SEBP3780
1948705 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
3. 163-6439 Y [1] BEARING GP-COMPRESSOR  
4. 163-6446 Y [1] BEARING GP-TURBINE  
5. 164-5339 [1] HOUSING  
6. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
7. 163-5495 [6] WASHER (10.38X17.9X3.4-MM THK)  
8. 164-4974 [3] SEAL-O-RING  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4978 [2] SEAL-RING  
11. 164-4980 [1] SEAL-RING  
12. 164-4982 [1] SEAL-PLATE  
13. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
14. 164-5340 [1] BEARING-THRUST  
15. 164-5341 [1] WHEEL-COMPRESSOR  
16. 194-8709 [1] SHAFT-TURBINE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Procedure To Wash Turbochargers On Engines Powered By Residual Fuel
1989/09/01
Improved Turbocharger Outlet Gasket
1989/10/01
New Turbocharger Gas Inlet Housing Used
1990/07/01
New Turbocharger Groups Reduce Exhaust Leaks
1990/08/01
New Turbocharger Groups Have Turbines with Round Dampening Wire Holes for Longer Service Life
1990/09/01
Specifications And Correct Bolt Torques On Turbochargers
1990/09/01
New Turbocharger Gas Inlet Housings Used
1990/11/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Turbocharger Turbine Nozzle Reusability Information {1052}
1994/09/01
Record Turbocharger Serial Number On Warranty Claims {1052}
1995/04/01
New Turbocharger Bearing Clearance Specifications{1052,1053}
1995/08/01
Turbocharger Cartridge Groups Available For Parts Service{1053,1052}
1995/08/01
Turbocharger Nozzle Cleaning {1052}
1996/01/17
New Turbocharger Wash Water Lines Groups Used{1052}
1996/02/16
Replacement Of Turbocharger Nozzle Ring Bolts{1052}
1996/03/19
Repair Kits Available For Prelube Pump Groups{1319}
1996/04/15
Turbocharger Nozzle Cleaning{1052}
1996/06/12
Turbocharger Water Wash Procedure {1052}
1996/09/23
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1997/06/23
New Turbocharger Wash Water Lines Groups Used {1052}
1997/08/01
New Specification For Clearance Between Turbocharger Turbine Wheel Blades And Turbine Wheel Cover Ring {1052}
1997/08/01
Air Quality Requirements For Turbocharger Air Impingement System {1052}
1997/08/01
Be Sure To Consider Combustion Air Content When Assessing Air Induction System Damage {1051,1058,1063,1087}
1998/02/01
Air Quality Requirements For Turbocharger Air Impingement System{1052}
1998/03/01
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1998/11/01
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1999/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
New Turbochargers Are Used In Certain 3608 and 3616 Applications {1052}
2001/04/01
New Connectors With An Orifice Are Used In The Turbocharger Oil Lines Groups {7553}
2002/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Improved Sealing for the Turbocharger {1052, 1065}
2012/10/24
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
A New Maintenance Kit is Available for the Turbocharger {1052}
2005/10/03
Operation and Maintenance Manual
Turbocharger - Water Wash
3600 Heavy Fuel Engines
Turbocharger Nozzle - Clean
3600 Heavy Fuel Engines
Turbocharger - Inspect - Napier Turbocharger - If Equipped
3600 Distillate Fuel Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Information For Use Of 8T3250 3600 Turbo Tool Group{0702, 1052}
Service Information For Use Of 8T3250 3600 Turbo Tool Group{0702, 1052}
Turbocharger Water Wash Procedure{1052}
Turbocharger Water Wash Procedure{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Disassembly And Assembly Of The Napier NA 297 Turbocharger{1052}
Disassembly And Assembly Of The Napier NA 297 Turbocharger{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065}
Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065}
Converting from the ABB Turbocharger to the Napier Turbocharger{1052}
Converting from the ABB Turbocharger to the Napier Turbocharger{1052}
Service Letter-NACD
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Australia
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-CFEL
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-CSARL
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Americas
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Brazil
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
Service Letter-Truck/Ag/Marine
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
Specifications
Turbocharger
3606 and 3608 Engines
Service Letter-China
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Asia
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Systems Operation
Turbocharger - Napier 297
3606 and 3608 Engines
Service Letter-APD
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Disassembly and Assembly
Turbocharger - Assemble
3606 and 3608 Engines
Turbocharger - Disassemble
3606 and 3608 Engines
Turbocharger - Assemble
3606 and 3608 Engines
Turbocharger - Disassemble
3606 and 3608 Engines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Procedure To Wash Turbochargers On Engines Powered By Residual Fuel{1052}
1989/09/18
Improved Turbocharger Outlet Gasket{1052,1061}
1989/09/25
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26

Caterpillar Parts SIS Catalog 3608 :

CARTRIDGE GP-TURBOCHARGER
116-2820 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
116-2819 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
116-2815 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
116-2814 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
116-2808 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
113-7930 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
111-9820 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
111-9819 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
128-1062 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
128-1063 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
136-1605 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
144-4001 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
150-2027 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
150-2033 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
163-6433 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
178-5270 CARTRIDGE GP-TURBOCHARGER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.