AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

194-8705 CARTRIDGE GP-TURBOCHARGER (CHG -02 THRU -04) PART OF 194-8722, 258-2287 TURBOCHARGER GP Type 2 3608


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

GEN SET ENGINE 3608 GEN SET ENGINE 6MC
 3608 GENERATOR, INDUSTRIAL, LOCOMOTIVE AND MARINE January 1998 to Current 6MC00001-UP SEBP3780 3608 6MC   (1986)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
CARTRIDGE GP-TURBOCHARGER
178-5270 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
194-8705 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
194-8705 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
194-8710 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
194-8717 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
200-8034 CARTRIDGE GP-TURBOCHARGER
 

#SEBP37801380
 

194-8705: CARTRIDGE GP-TURBOCHARGER

194-8705 CARTRIDGE GP-TURBOCHARGER (CHG -02 THRU -04)
PART OF 194-8722, 258-2287 TURBOCHARGER GP
Type 2
i02157025 SEBP3780
1948705 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
3. 163-6439 Y [1] BEARING GP-COMPRESSOR  
4. 163-6446 Y [1] BEARING GP-TURBINE  
5. 164-5339 [1] HOUSING  
6. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
7. 163-5495 [6] WASHER (10.38X17.9X3.4-MM THK)  
8. 164-4974 [3] SEAL-O-RING  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4978 [2] SEAL-RING  
11. 164-4980 [1] SEAL-RING  
12. 164-4982 [1] SEAL-PLATE  
13. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
14. 273-2102 [1] BEARING-THRUST  
15. 214-5455 C [1] WHEEL-COMPRESSOR  
16. 194-8709 [1] SHAFT-TURBINE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801381
 

194-8710: CARTRIDGE GP-TURBOCHARGER

194-8710 CARTRIDGE GP-TURBOCHARGER (CHG -00 THRU -03)
PART OF 179-4688, 258-2291 TURBOCHARGER GP
i01485310 SEBP3780
1948710 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
3. 163-6439 Y [1] BEARING GP-COMPRESSOR  
4. 163-6446 Y [1] BEARING GP-TURBINE  
5. 164-5339 [1] HOUSING  
6. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
7. 163-5495 [6] WASHER (10.38X17.9X3.4-MM THK)  
8. 164-4974 [3] SEAL-O-RING  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4978 [2] SEAL-RING  
11. 164-4980 [1] SEAL-RING  
12. 164-4982 [1] SEAL-PLATE  
13. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
14. 273-2102 [1] BEARING-THRUST  
15. 194-8715 [1] WHEEL-COMPRESSOR  
16. 194-8716 [1] SHAFT-TURBINE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801382
 

194-8717: CARTRIDGE GP-TURBOCHARGER

194-8717 CARTRIDGE GP-TURBOCHARGER (CHG -00 THRU -03)
PART OF 175-6670, 258-2292 TURBOCHARGER GP
i01480535 SEBP3780
1948717 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
2. 163-6439 Y [1] BEARING GP-COMPRESSOR  
3. 163-6446 Y [1] BEARING GP-TURBINE  
4. 164-5339 [1] HOUSING  
5. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
6. 163-5495 [6] WASHER (10.38X17.9X3.4-MM THK)  
7. 164-4974 [3] SEAL-O-RING  
8. 164-4975 [1] PIPE-OIL FEED  
9. 164-4978 [2] SEAL-RING  
10. 164-4980 [1] SEAL-RING  
11. 164-4982 [1] SEAL-PLATE  
12. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
13. 273-2102 [1] BEARING-THRUST  
14. 194-8715 [1] WHEEL-COMPRESSOR  
15. 194-8719 [1] SHAFT-TURBINE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801383
 

200-8034: CARTRIDGE GP-TURBOCHARGER

200-8034 CARTRIDGE GP-TURBOCHARGER (CHG -00)
PART OF 200-8031, 200-8032 TURBOCHARGER GP
Type 1
i01486477 SEBP3780
2008034 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
3. 163-6439 Y [1] BEARING GP-COMPRESSOR  
4. 163-6446 Y [1] BEARING GP-TURBINE  
5. 164-5339 [1] HOUSING  
6. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
7. 163-5495 [6] WASHER (10.38X17.9X3.4-MM THK)  
8. 164-4974 [3] SEAL-O-RING  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4978 [2] SEAL-RING  
11. 164-4980 [1] SEAL-RING  
12. 164-4982 [1] SEAL-PLATE  
13. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
14. 164-5340 [1] BEARING-THRUST  
15. 164-5341 [1] WHEEL-COMPRESSOR  
16. 164-5342 [1] SHAFT-TURBINE  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801384
 

200-8034: CARTRIDGE GP-TURBOCHARGER

200-8034 CARTRIDGE GP-TURBOCHARGER (CHG -01 THRU -03)
PART OF 200-8031, 200-8032, 258-2288, 258-2289 TURBOCHARGER GP
i02157033 SEBP3780
2008034 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
2. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
3. 163-6439 Y [1] BEARING GP-COMPRESSOR  
4. 163-6446 Y [1] BEARING GP-TURBINE  
5. 164-5339 [1] HOUSING  
6. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
7. 163-5495 [6] WASHER (10.38X17.9X3.4-MM THK)  
8. 164-4974 [3] SEAL-O-RING  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4978 [2] SEAL-RING  
11. 164-4980 [1] SEAL-RING  
12. 164-4982 [1] SEAL-PLATE  
13. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
14. 273-2102 [1] BEARING-THRUST  
15. 214-5455 C [1] WHEEL-COMPRESSOR  
16. 164-5342 [1] SHAFT-TURBINE  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801385
 

284-8289: CARTRIDGE GP-TURBOCHARGER

284-8289 CARTRIDGE GP-TURBOCHARGER (CHG -00 THRU -02)
PART OF 284-8279 TURBOCHARGER GP
i02574884 SEBP3780
2848289 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
2. 8S-5953 [3] SEAL-O-RING  
3. 8I-4284 [3] SEAL-O-RING  
4. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
5. 163-6436 [2] COVER  
6. 163-6437 [2] GASKET  
7. 163-6438 [3] COVER  
8. 163-6439 Y [1] BEARING GP-COMPRESSOR  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4980 [1] SEAL-RING  
11. 164-4982 [1] SEAL-PLATE  
12. 164-5339 [1] HOUSING  
13. 164-5341 [1] WHEEL-COMPRESSOR  
14. 273-2102 [1] BEARING-THRUST  
15. 284-8283 [1] SHAFT-TURBINE  
16. 284-8286 [1] SEAL-LIP TYPE  
17. 364-2153 Y [1] BEARING GP-TURBINE  
18. 7X-0796 [4] LOCKWASHER (10.2X18.4X2.5-MM THK)  
19. 227-9851 [6] SET-LOCKWASHER  
20. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
21. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801386
 

284-8290: CARTRIDGE GP-TURBOCHARGER

284-8290 CARTRIDGE GP-TURBOCHARGER (CHG -00 THRU -02)
PART OF 284-8280 TURBOCHARGER GP
i02568608 SEBP3780
2848290 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
2. 8S-5953 [3] SEAL-O-RING  
3. 8I-4284 [3] SEAL-O-RING  
4. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
5. 163-6436 [2] COVER  
6. 163-6437 [2] GASKET  
7. 163-6438 [3] COVER  
8. 163-6439 Y [1] BEARING GP-COMPRESSOR  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4980 [1] SEAL-RING  
11. 164-4982 [1] SEAL-PLATE  
12. 164-5339 [1] HOUSING  
13. 194-8715 [1] WHEEL-COMPRESSOR  
14. 273-2102 [1] BEARING-THRUST  
15. 284-8284 [1] SHAFT-TURBINE  
16. 284-8286 [1] SEAL-LIP TYPE  
17. 364-2153 Y [1] BEARING GP-TURBINE  
18. 7X-0796 [4] LOCKWASHER (10.2X18.4X2.5-MM THK)  
19. 227-9851 [6] SET-LOCKWASHER  
20. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
21. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801387
 

284-8291: CARTRIDGE GP-TURBOCHARGER

284-8291 CARTRIDGE GP-TURBOCHARGER (CHG -00 THRU -02)
PART OF 284-8281 TURBOCHARGER GP
i02574885 SEBP3780
2848291 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
2. 8S-5953 [3] SEAL-O-RING  
3. 8I-4284 [3] SEAL-O-RING  
4. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
5. 163-6436 [2] COVER  
6. 163-6437 [2] GASKET  
7. 163-6438 [3] COVER  
8. 163-6439 Y [1] BEARING GP-COMPRESSOR  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4980 [1] SEAL-RING  
11. 164-4982 [1] SEAL-PLATE  
12. 164-5339 [1] HOUSING  
13. 194-8715 [1] WHEEL-COMPRESSOR  
14. 273-2102 [1] BEARING-THRUST  
15. 284-8285 [1] SHAFT-TURBINE  
16. 284-8286 [1] SEAL-LIP TYPE  
17. 364-2153 Y [1] BEARING GP-TURBINE  
18. 7X-0796 [4] LOCKWASHER (10.2X18.4X2.5-MM THK)  
19. 227-9851 [6] SET-LOCKWASHER  
20. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
21. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801388
 

284-8292: CARTRIDGE GP-TURBOCHARGER

284-8292 CARTRIDGE GP-TURBOCHARGER (CHG -00 THRU -02)
PART OF 284-8276 TURBOCHARGER GP
i02525634 SEBP3780
2848292 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
2. 8S-5953 [3] SEAL-O-RING  
3. 8I-4284 [3] SEAL-O-RING  
4. 163-6434 Y [1] HOUSING GP-CENTER (TURBOCHARGER, BEARING)  
5. 163-6436 [2] COVER  
6. 163-6437 [2] GASKET  
7. 163-6438 [3] COVER  
8. 163-6439 Y [1] BEARING GP-COMPRESSOR  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4980 [1] SEAL-RING  
11. 164-4982 [1] SEAL-PLATE  
12. 164-5339 [1] HOUSING  
13. 214-5455 [1] WHEEL-COMPRESSOR  
14. 273-2102 [1] BEARING-THRUST  
15. 284-8282 [1] SHAFT-TURBINE  
16. 284-8286 [1] SEAL-LIP TYPE  
17. 364-2153 Y [1] BEARING GP-TURBINE  
18. 7X-0796 [4] LOCKWASHER (10.2X18.4X2.5-MM THK)  
19. 227-9851 [6] SET-LOCKWASHER  
20. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
21. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801389
 

284-8293: CARTRIDGE GP-TURBOCHARGER

284-8293 CARTRIDGE GP-TURBOCHARGER (CHG -00 THRU -02)
PART OF 284-8278 TURBOCHARGER GP
i02536472 SEBP3780
2848293 CARTRIDGE GP-TURBOCHARGER Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4136 M [4] BOLT (M10X1.5X25-MM)  
2. 8S-5953 [3] SEAL-O-RING  
3. 8I-4284 [3] SEAL-O-RING  
4. 163-6435 [1] HOUSING-BEARING  
5. 163-6436 [2] COVER  
6. 163-6437 [2] GASKET  
7. 163-6438 [3] COVER  
8. 163-6439 Y [1] BEARING GP-COMPRESSOR  
9. 164-4975 [1] PIPE-OIL FEED  
10. 164-4980 [1] SEAL-RING  
11. 164-4982 [1] SEAL-PLATE  
12. 164-5339 [1] HOUSING  
13. 214-5455 [1] WHEEL-COMPRESSOR  
14. 273-2102 [1] BEARING-THRUST  
15. 284-8283 [1] SHAFT-TURBINE  
16. 284-8286 [1] SEAL-LIP TYPE  
17. 364-2153 Y [1] BEARING GP-TURBINE  
18. 7X-0796 [4] LOCKWASHER (10.2X18.4X2.5-MM THK)  
19. 227-9851 [6] SET-LOCKWASHER  
20. 200-8038 M [6] BOLT-SOCKET HEAD (M10X1.5-THD)  
21. 5A-3604 M [18] BOLT-SOCKET HEAD (M8X1.25X25-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Procedure To Wash Turbochargers On Engines Powered By Residual Fuel
1989/09/01
Improved Turbocharger Outlet Gasket
1989/10/01
New Turbocharger Gas Inlet Housing Used
1990/07/01
New Turbocharger Groups Reduce Exhaust Leaks
1990/08/01
New Turbocharger Groups Have Turbines with Round Dampening Wire Holes for Longer Service Life
1990/09/01
Specifications And Correct Bolt Torques On Turbochargers
1990/09/01
New Turbocharger Gas Inlet Housings Used
1990/11/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Turbocharger Turbine Nozzle Reusability Information {1052}
1994/09/01
Record Turbocharger Serial Number On Warranty Claims {1052}
1995/04/01
New Turbocharger Bearing Clearance Specifications{1052,1053}
1995/08/01
Turbocharger Cartridge Groups Available For Parts Service{1053,1052}
1995/08/01
Turbocharger Nozzle Cleaning {1052}
1996/01/17
New Turbocharger Wash Water Lines Groups Used{1052}
1996/02/16
Replacement Of Turbocharger Nozzle Ring Bolts{1052}
1996/03/19
Repair Kits Available For Prelube Pump Groups{1319}
1996/04/15
Turbocharger Nozzle Cleaning{1052}
1996/06/12
Turbocharger Water Wash Procedure {1052}
1996/09/23
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1997/06/23
New Turbocharger Wash Water Lines Groups Used {1052}
1997/08/01
New Specification For Clearance Between Turbocharger Turbine Wheel Blades And Turbine Wheel Cover Ring {1052}
1997/08/01
Air Quality Requirements For Turbocharger Air Impingement System {1052}
1997/08/01
Be Sure To Consider Combustion Air Content When Assessing Air Induction System Damage {1051,1058,1063,1087}
1998/02/01
Air Quality Requirements For Turbocharger Air Impingement System{1052}
1998/03/01
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1998/11/01
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1999/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
New Turbochargers Are Used In Certain 3608 and 3616 Applications {1052}
2001/04/01
New Connectors With An Orifice Are Used In The Turbocharger Oil Lines Groups {7553}
2002/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Improved Sealing for the Turbocharger {1052, 1065}
2012/10/24
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
A New Maintenance Kit is Available for the Turbocharger {1052}
2005/10/03
Operation and Maintenance Manual
Turbocharger - Water Wash
3600 Heavy Fuel Engines
Turbocharger Nozzle - Clean
3600 Heavy Fuel Engines
Turbocharger - Inspect - Napier Turbocharger - If Equipped
3600 Distillate Fuel Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Information For Use Of 8T3250 3600 Turbo Tool Group{0702, 1052}
Service Information For Use Of 8T3250 3600 Turbo Tool Group{0702, 1052}
Turbocharger Water Wash Procedure{1052}
Turbocharger Water Wash Procedure{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Disassembly And Assembly Of The Napier NA 297 Turbocharger{1052}
Disassembly And Assembly Of The Napier NA 297 Turbocharger{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065}
Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065}
Converting from the ABB Turbocharger to the Napier Turbocharger{1052}
Converting from the ABB Turbocharger to the Napier Turbocharger{1052}
Service Letter-NACD
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Australia
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-CFEL
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-CSARL
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Americas
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Brazil
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
Service Letter-Truck/Ag/Marine
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
The Turbocharger Compressor Wheel Needs To Be Upgrade On Certain 3606 And 3608 Marine Engines
Specifications
Turbocharger
3606 and 3608 Engines
Service Letter-China
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Asia
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Systems Operation
Turbocharger - Napier 297
3606 and 3608 Engines
Service Letter-APD
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Disassembly and Assembly
Turbocharger - Assemble
3606 and 3608 Engines
Turbocharger - Disassemble
3606 and 3608 Engines
Turbocharger - Assemble
3606 and 3608 Engines
Turbocharger - Disassemble
3606 and 3608 Engines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Procedure To Wash Turbochargers On Engines Powered By Residual Fuel{1052}
1989/09/18
Improved Turbocharger Outlet Gasket{1052,1061}
1989/09/25
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26

Caterpillar Parts SIS Catalog 3608 :

CARTRIDGE GP-TURBOCHARGER
194-8705 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
178-5270 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
163-6433 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
150-2033 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
150-2027 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
144-4001 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
136-1605 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
128-1063 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
194-8710 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
194-8717 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
200-8034 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
200-8034 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
284-8289 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
284-8290 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
284-8291 CARTRIDGE GP-TURBOCHARGER
CARTRIDGE GP-TURBOCHARGER
284-8292 CARTRIDGE GP-TURBOCHARGER

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.