FUEL SYSTEM
GOVERNOR GPPUMP GP-FUEL INJECTION
FUEL SYSTEM
GOVERNOR GP
#SEBP37801860
2W-0782: COVER GP-GOVERNOR
2W-0782 COVER GP-GOVERNOR (CHG -00)
LIMITER & PNEUMATIC SPEED SETTING
PART OF 124-3172, 2W-2848, 2W-2849, 2W-2850, 7C-6536, 7C-6623, 7C-7720 GOVERNOR GP
FIELD REPLACEMENT ORDER @@@@@124-3172@@@@@
LIMITER & PNEUMATIC SPEED SETTING
PART OF 124-3172, 2W-2848, 2W-2849, 2W-2850, 7C-6536, 7C-6623, 7C-7720 GOVERNOR GP
FIELD REPLACEMENT ORDER @@@@@124-3172@@@@@
For full view, you need register
Parts for your 3608 GEN SET ENGINE:
CATERPILLAR SIS#SEBP37801861
1W-0832: DRIVE GP-GOVERNOR
1W-0832 DRIVE GP-GOVERNOR (CHG -07, -08)
Type 1
Type 1
For full view, you need register
Parts for your 3608 GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-1244 | [1] | PINION-GOVERNOR DRIVE | |
| 2. | 1W-0608 | [1] | WASHER-THRUST | |
| 3. | 1W-0603 | [1] | HOUSING AS-DRIVE | |
| 4. | 6V-3537 | [2] | DOWEL | |
| 5. | 1W-0604 | [2] | BUSHING | |
| 6. | 1W-0605 | [2] | PIN-HOUSING SIDE | |
| 7. | 7N-2043 | [2] | DOWEL | |
| 8. | 1W-0609 | [1] | WASHER-RETAINING | |
| 9. | 1W-0611 | [1] | SHIM (PACK) | |
| 10. | 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | |
| 11. | 9S-8007 | [2] | PLUG | |
| 12. | 5P-7813 | [2] | SEAL-O-RING | |
| 13. | 1W-0612 | [1] | COUPLING-GOVERNOR DRIVE | |
| 14. | 5S-9134 | [1] | SEAL-O-RING | |
| 15. | 6V-0973 | [1] | SEAL-O-RING | |
| 16. | 4W-6853 | [1] | GEAR-BEVEL (69 TEETH) | |
| 17. | 0S-1571 | [6] | BOLT (3/8-16X1.75-IN) | |
| 18. | 3P-0647 | [4] | SEAL-O-RING |
#SEBP37801862
1W-0832: DRIVE GP-GOVERNOR
1W-0832 DRIVE GP-GOVERNOR (CHG -09, -10)
Type 2
Type 2
For full view, you need register
Parts for your 3608 GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-1025 C | [1] | PINION (23-TEETH) | |
| 2. | 1W-0608 | [1] | WASHER-THRUST | |
| 3. | 1W-0603 | [1] | HOUSING AS-DRIVE | |
| 4. | 6V-3537 | [2] | DOWEL | |
| 5. | 1W-0604 | [2] | BUSHING | |
| 6. | 1W-0605 | [2] | PIN-HOUSING SIDE | |
| 7. | 7N-2043 | [2] | DOWEL | |
| 8. | 1W-0609 | [1] | WASHER-RETAINING | |
| 9. | 1W-0611 B | [1] | SHIM (PACK) | |
| 10. | 0S-1619 | [4] | BOLT (3/8-16X3-IN) | |
| 11. | 3P-0647 | [4] | SEAL-O-RING | |
| 12. | 0S-1571 | [6] | BOLT (3/8-16X1.75-IN) | |
| 13. | 1W-0612 | [1] | COUPLING-GOVERNOR DRIVE | |
| 14. | 5S-9134 | [1] | SEAL-O-RING | |
| 15. | 6V-0973 | [1] | SEAL-O-RING | |
| 16. | 9Y-1024 C | [1] | GEAR-BEVEL (69-TEETH) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP37801863
2W-1242: DRIVE GP-GOVERNOR
2W-1242 DRIVE GP-GOVERNOR (CHG -04, -05)
For full view, you need register
Parts for your 3608 GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9Y-1027 | [1] | PINION-GOVERNOR DRIVE (33-TEETH) | |
| 2. | 1W-0608 | [1] | WASHER-THRUST | |
| 3. | 1W-0603 | [1] | HOUSING AS-DRIVE | |
| 4. | 6V-3537 | [2] | DOWEL | |
| 5. | 1W-0604 | [2] | BUSHING | |
| 6. | 1W-0605 | [2] | PIN-HOUSING SIDE | |
| 7. | 7N-2043 | [2] | DOWEL | |
| 8. | 1W-0609 | [1] | WASHER-RETAINING | |
| 9. | 1W-0611 B | [1] | SHIM (PACK) | |
| 10. | 0T-0573 | [4] | BOLT (3/8-16X2.75-IN) | |
| 11. | 0S-1571 | [6] | BOLT (3/8-16X1.75-IN) | |
| 12. | 3P-0647 | [4] | SEAL-O-RING | |
| 13. | 1W-0612 | [1] | COUPLING-GOVERNOR DRIVE | |
| 14. | 5S-9134 | [1] | SEAL-O-RING | |
| 15. | 6V-0973 | [1] | SEAL-O-RING | |
| 16. | 9Y-1026 C | [1] | GEAR-BEVEL (68-TEETH) | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP37801864
140-1766: FASTENER GP-FUEL INJ PUMP
140-1766 FASTENER GP-FUEL INJ PUMP (CHG -00, -00D1)
FOR USE WITH LVDT SENSOR UG ACTUATOR ASSEMBLY
FOR USE WITH LVDT SENSOR UG ACTUATOR ASSEMBLY
For full view, you need register
Parts for your 3608 GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-9575 | [1] | BOLT (5/16-18X1.56-IN) | |
| 2. | 2W-0028 | [1] | LEVER | |
| 3. | 7X-7875 | [1] | ROD END | |
| 4. | 3S-2713 | [1] | NUT-FULL (3/8-24-THD) | |
| 5. | 9Y-8490 | [1] | ROD | |
| 6. | 1S-3584 | [1] | NUT-FULL (3/8-24 LH-THD) | |
| 7. | 7X-7874 | [1] | ROD END | |
| 8. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 9. | 1W-7907 | [1] | LEVER | |
| 10. | 3V-3308 | [7] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
| 11. | 124-7374 | [1] | CONNECTOR AS (10-PIN) | |
| 12. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 13. | 0L-1143 | [4] | BOLT (3/8-16X2.5-IN) | |
| 14. | 4W-3938 | [1] | GASKET | |
| 15. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 9C-7035 | [1] | WASHER (19.8X38X1.5-MM THK) |
#SEBP37801865
4P-4048: FASTENER GP-FUEL INJ PUMP
4P-4048 FASTENER GP-FUEL INJ PUMP (CHG -00 THRU -05)
For full view, you need register
Parts for your 3608 GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| 2. | 8T-7547 M | [4] | BOLT (M8X1.25X30-MM) | |
| 3. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
| 4. | 3V-3308 | [4] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
| 5. | 4P-3134 | [1] | LEVER | |
| 6. | 6V-5754 | [2] | PLUG | |
| 7. | 7X-7874 | [1] | ROD END | |
| 8. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 9. | 1S-3584 | [1] | NUT-FULL (3/8-24 LH-THD) | |
| 10. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 11. | 5M-2894 | [1] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 12. | 6V-0973 | [1] | SEAL-O-RING | |
| 13. | 5S-9134 | [1] | SEAL-O-RING | |
| 14. | 4P-4049 | [1] | ADAPTER-MOUNT | |
| 15. | 7C-8566 | [1] | LEVER | |
| 16. | 7X-7875 | [1] | ROD END | |
| 17. | 0S-2307 | [1] | SPACER (0.406X0.75X0.39-IN THK) | |
| 18. | 3S-2713 | [1] | NUT-FULL (3/8-24-THD) | |
| 19. | 4P-4115 | [1] | ROD | |
| 20. | 7W-0592 | [1] | PLATE-THRUST | |
| 21. | 0S-1588 | [6] | BOLT (3/8-16X1.25-IN) | |
| 22. | 9X-9656 | [1] | PLUG AS-CONNECTOR (5-PIN) | |
| 23. | 9C-7035 | [3] | WASHER (19.8X38X1.5-MM THK) | |
| M | METRIC PART | |||
#SEBP37801866
4P-7032: FASTENER GP-FUEL INJ PUMP
4P-7032 FASTENER GP-FUEL INJ PUMP (CHG -00, -01)
For full view, you need register
Parts for your 3608 GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-9575 | [1] | BOLT (5/16-18X1.56-IN) | |
| 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | ||
| 2. | 2W-0028 | [1] | LEVER | |
| 3. | 7X-7875 | [1] | ROD END | |
| 4. | 3S-2713 | [1] | NUT-FULL (3/8-24-THD) | |
| 5. | 9Y-8490 | [1] | ROD | |
| 6. | 1S-3584 | [1] | NUT-FULL (3/8-24 LH-THD) | |
| 7. | 7X-7874 | [1] | ROD END | |
| 8. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 9. | 1W-7907 | [1] | LEVER | |
| 10. | 3V-3308 | [8] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
| 11. | 7W-4993 | [1] | POINTER | |
| 12. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 13. | 0L-1143 | [4] | BOLT (3/8-16X2.5-IN) | |
| 14. | 4W-3938 | [1] | GASKET | |
| 15. | 9C-7035 | [1] | WASHER (19.8X38X1.5-MM THK) |
#SEBP37801867
4P-7034: FASTENER GP-FUEL INJ PUMP
4P-7034 FASTENER GP-FUEL INJ PUMP (CHG -00 THRU -03)
For full view, you need register
Parts for your 3608 GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1571 | [1] | BOLT (3/8-16X1.75-IN) | |
| 2. | 7C-8421 | [1] | LEVER | |
| 3. | 0S-1588 | [6] | BOLT (3/8-16X1.25-IN) | |
| 4. | 3V-3308 | [4] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
| 5. | 7X-7875 | [1] | ROD END | |
| 6. | 3S-2713 | [1] | NUT-FULL (3/8-24-THD) | |
| 7. | 1W-7907 | [1] | LEVER | |
| 8. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 9. | 7X-7874 | [1] | ROD END | |
| 10. | 1S-3584 | [1] | NUT-FULL (3/8-24 LH-THD) | |
| 11. | 4W-3938 | [1] | GASKET | |
| 12. | 9Y-8490 | [1] | ROD | |
| 13. | 9C-7035 | [1] | WASHER (19.8X38X1.5-MM THK) | |
| 14. | 124-7374 | [1] | CONNECTOR AS (10-PIN) |
#SEBP37801868
4P-7966: FASTENER GP-FUEL INJ PUMP
4P-7966 FASTENER GP-FUEL INJ PUMP (CHG -00 THRU -03)
For full view, you need register
Parts for your 3608 GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-5754 | [2] | PLUG | |
| 2. | 4P-7967 | [1] | LEVER (48-TEETH) | |
| 3. | 0S-1571 | [1] | BOLT (3/8-16X1.75-IN) | |
| 4. | 3V-3308 | [6] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
| 5. | 0S-1588 | [4] | BOLT (3/8-16X1.25-IN) | |
| 6. | 4W-3938 | [1] | GASKET | |
| 7. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 8. | 7X-7874 | [1] | ROD END (LH) | |
| 1S-3584 | [1] | NUT-FULL (3/8-24 LH-THD) | ||
| 9. | 124-7374 | [1] | CONNECTOR AS (10-PIN) | |
| 10. | 9Y-8485 | [1] | ROD | |
| 11. | 7X-7875 | [1] | ROD END | |
| 6V-8183 | [1] | NUT-FULL (3/8-24-THD) | ||
| 12. | 0S-1590 | [1] | BOLT (3/8-16X2-IN) | |
| 13. | 7C-8566 | [1] | LEVER | |
| 14. | 9C-7035 | [3] | WASHER (19.8X38X1.5-MM THK) |
#SEBP37801869
4W-0690: FASTENER GP-FUEL INJ PUMP
4W-0690 FASTENER GP-FUEL INJ PUMP (CHG -01, -02)
For full view, you need register
Parts for your 3608 GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| 2. | 4W-3938 | [1] | GASKET | |
| 3. | 7W-4969 | [1] | BLOCK | |
| 4. | 7W-4968 | [1] | ARM-LEVER | |
| 5. | 5B-1484 | [2] | NUT (3/4-10-THD) | |
| 6. | 0S-1591 | [1] | BOLT (3/8-16X1.5-IN) | |
| 7. | 0L-1143 | [1] | BOLT (3/8-16X2.5-IN) | |
| 8. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 9. | 3V-3308 | [3] | WASHER-HARD (10.2X20.5X2.5-MM THK) |
Information:
FUEL SYSTEM
GOVERNOR GP
General Service Information
Appendix A Programming Checklist (standard models)
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Appendix B Programming Checklist (9905-457)
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
WOODWARD 701 DIGITAL SPEED CONTROL FOR RECIPROCATING ENGINES
Engine News
Repair Kit Is Available For Long Stroke Fuel Ratio Control Group Used With 3161 Governors {1278}
1994/10/01
1994/10/01
Operation and Maintenance Manual
Special Instruction
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
Using The 6V4060 Engine Set Point Indicator Group{0781}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Conversion From 3161 Marine Governor To 723PLUS Digital Speed Control With UG Actuator{1264}
Conversion From 3161 Marine Governor To 723PLUS Digital Speed Control With UG Actuator{1264}
Conversion From 3161 Marine Governor To 723PLUS Digital Speed Control With UG Actuator{1264}
Service Letter-NACD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Tool Operating Manual
Using the 4C6710 Governor Test Unit Group{0782, 1264}
Using the 4C6710 Governor Test Unit Group{0782, 1264}
Using the 4C6710 Governor Test Unit Group{0782, 1264}
Service Letter-China
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Service Letter-Asia
Systems Operation
Service Letter-APD
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Product Support Program For Rebuilding Remanufactured 0R4105, 0R8310, 0R4106, 0R8311, 0R8306, 0R8312, 0R8308, 0R8313, And 0R8309 Self-Contained Woodward Governors Used On Certain D11N Tractors; 776B, 776C, 776D, And 784B Tractors; 777B, 777C, 777D, 785, 785B, 785C, 789, 789B, 789C, 793, 793B, And 793C Trucks; 994 Wheel Loaders; And 3508, 3512, 3516, 3606, 3608, 3612, And 3616 Engines
Testing and Adjusting
Troubleshooting
Appendix A. Guide for Handling and Protection of Electronic Controls, Printed Circuit Boards, & Modules
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Appendix B. EMI Control in Electronic Governing Systems
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
2301A ELECTRONIC GOVERNORS (LOAD SHARING) FOR GENERATOR SETS
Troubleshooting Heinzmann Electronic Speed Governors
HEINZMAN GOVERNOR (3600 GENERATOR SET APPLICATIONS)
HEINZMAN GOVERNOR (3600 GENERATOR SET APPLICATIONS)
Disassembly and Assembly
Service Magazine
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
1986/06/09
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
1986/06/16
