AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7C-8423 FASTENER GP-FUEL INJ PUMP (CHG -00) 3608 GEN SET ENGINE


FUEL SYSTEM
PUMP GP-FUEL INJECTION
GOVERNOR GP
FILTER GP-FUEL

GEN SET ENGINE 3608 GEN SET ENGINE 6MC
 3608 GENERATOR, INDUSTRIAL, LOCOMOTIVE AND MARINE January 1998 to Current 6MC00001-UP SEBP3780 3608 6MC   (1986)

FUEL SYSTEM

PUMP GP-FUEL INJECTION
FASTENER GP-FUEL INJ PUMP
4P-7966 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
4W-0690 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
7C-8423 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
7W-0916 FASTENER GP-FUEL INJ PUMP
INJECTOR GP-FUEL
137-4729 INJECTOR GP-FUEL
INJECTOR GP-FUEL
168-3554 INJECTOR GP-FUEL
 

#SEBP37801870
 

7C-8423: FASTENER GP-FUEL INJ PUMP

7C-8423 FASTENER GP-FUEL INJ PUMP (CHG -00)
i00069674 SEBP3780
7C8423 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7D-1962 [1] PLUG AS-CONNECTOR (10-PIN)  
2. 4W-3938 [1] GASKET  
3. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
4. 7C-8421 [1] LEVER  
5. 0S-1571 [1] BOLT (3/8-16X1.75-IN)  
 

#SEBP37801871
 

7W-0916: FASTENER GP-FUEL INJ PUMP

7W-0916 FASTENER GP-FUEL INJ PUMP (CHG -00 THRU -02)
i00069825 SEBP3780
7W0916 FASTENER GP-FUEL INJ PUMP Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1143 [4] BOLT (3/8-16X2.5-IN)  
  3V-3308 [4] WASHER-HARD (10.2X20.5X2.5-MM THK)  
2. 6V-3865 [1] SEAL-O-RING  
 

#SEBP37801872
 

112-5051: FASTENER GP-GOVERNOR

112-5051 FASTENER GP-GOVERNOR (CHG -00 THRU -03)
i00070065 SEBP3780
1125051 FASTENER GP-GOVERNOR Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-9575 [1] BOLT (5/16-18X1.56-IN)  
2. 2W-0028 [1] LEVER  
3. 7X-7875 [1] ROD END  
4. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
5. 9Y-8490 [1] ROD  
6. 1S-3584 [1] NUT-FULL (3/8-24 LH-THD)  
7. 7X-7874 [1] ROD END  
8. 0S-1590 [5] BOLT (3/8-16X2-IN)  
9. 1W-7907 [1] LEVER  
10. 3V-3308 [7] WASHER-HARD (10.2X20.5X2.5-MM THK)  
11. 116-4592 [1] PLUG AS-CONNECTOR  
12. 0S-1588 [2] BOLT (3/8-16X1.25-IN)  
13. 9C-7035 [1] WASHER (19.8X38X1.5-MM THK)  
14. 4W-3938 [1] GASKET  
15. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
 

#SEBP37801873
 

7W-6709: FILTER ELEMENT-FUEL

7W-6709 FILTER ELEMENT-FUEL (CHG -00, -00D1, -00D2, -01)
RESIDUAL FUEL
i01561955 SEBP3780
7W6709 FILTER ELEMENT-FUEL Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

#SEBP37801874
 

119-8900: FILTER GP-FUEL

119-8900 FILTER GP-FUEL (CHG -00 THRU -03)
VOKES RESIDUAL FUEL
FOR USE WITH MULTIPLE HEAVY FUEL ENGINES
i00070090 SEBP3780
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  119-8901 [4] FILTER ELEMENT-FUEL  
  7E-4484 [4] GASKET  
  143-7413 Y [1] KIT-FUEL FILTER  
  150-3396 [2] SEAL-HOUSING  
  150-3395 [2] VALVE-RELIEF  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37801875
 

356-3391: FILTER GP-FUEL

356-3391 FILTER GP-FUEL (CHG -00)
i05119872 SEBP3780
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  7E-4480 [4] FILTER ELEMENT-FUEL  
 

#SEBP37801876
 

4P-0448: FILTER GP-FUEL

4P-0448 FILTER GP-FUEL (CHG -00 THRU -03, -03D1, -03D2)
VOKES RESIDUAL FUEL
i00069312 SEBP3780
4P0448 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-4480 [2] FILTER ELEMENT-FUEL  
2. 9X-4623 [2] SEAL-O-RING  
3. 9X-4622 [4] SEAL-O-RING  
4. 9X-4621 [3] SEAL-O-RING  
5. 7E-4484 [4] GASKET  
 

#SEBP37801877
 

7W-1543: FILTER GP-FUEL

7W-1543 FILTER GP-FUEL (CHG -00 THRU -03)
Type 1
i00069832 SEBP3780
7W1543 FILTER GP-FUEL Parts scheme 7W1543 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-0829 [1] HANDLE  
2. 1W-4422 [1] LEVER AS  
3. 7W-1551 [1] SHAFT AS  
4. 9S-4191 [5] PLUG (9/16-18-THD)  
5. 6V-5049 [7] SEAL-O-RING  
6. 9M-4594 [2] SPACER (0.406X0.875X0.75-IN THK)  
7. 0S-1590 [2] BOLT (3/8-16X2-IN)  
8. 0S-1588 [7] BOLT (3/8-16X1.25-IN)  
9. 3V-3308 [1] WASHER-HARD (10.2X20.5X2.5-MM THK)  
10. 6V-7238 [2] VALVE-SHUTOFF (DRAIN CONTROL)  
  8L-2786 [2] SEAL-O-RING  
11. 7W-1550 [2] COVER  
12. 6V-5055 [4] SEAL-O-RING  
13. 2W-6862 [2] SPRING  
14. 1W-6362 [2] RACK-FUEL FILTER  
15. 7W-8088 [2] RETAINER  
16. 1W-4056 [8] FILTER ELEMENT-FUEL  
17. 7W-1544 [1] HOUSING AS  
  9M-3914 [2] BEARING-ALIGNING (19.05-MM ID)  
18. 7W-1547 [1] HOUSING-END  
19. 4W-8762 [2] VALVE-CHECK (FUEL INLET)  
20. 4W-8761 [2] VALVE-CHECK (FUEL OUTLET)  
  5P-7701 [2] SEAL-O-RING  
21. 061-9258 [1] TEE  
22. 5P-2242 [1] TEE-SWIVEL  
23. 0S-1588 [7] BOLT (3/8-16X1.25-IN)  
24. 6K-9194 [1] ELBOW  
25. 2W-7145 [1] TUBE AS  
26. 031-5744 [1] ELBOW  
27. 7W-1555 [1] TUBE AS  
28. 6V-0852 [1] CAP-DUST  
  6V-3965 [1] FITTING (QUICK DISCONNECT)  
  6V-5049 [1] SEAL-O-RING  
29. 0S-1616 [1] BOLT (1/4-20X1-IN)  
  5P-0537 [1] WASHER-HARD (7.2X14.5X2-MM THK)  
30. 8T-2188 [1] SEAL-QUAD RING  
31. 8J-4455 [1] BALL  
32. 5J-8004 [1] SPRING  
33. 9S-4182 [1] PLUG (7/16-20-THD)  
34. 6V-5048 [2] SEAL-O-RING  
35. 7W-1549 [1] COVER  
36. 8T-5384 [1] SEAL-FACE  
37. 5B-9603 [2] BOLT (3/8-16X5-IN)  
38. 1W-4357 [1] PLUG  
39. 7W-1548 [1] VALVE (CHECK)  
 

#SEBP37801878
 

7W-1543: FILTER GP-FUEL

7W-1543 FILTER GP-FUEL (CHG -04 THRU -13)
i00067712 SEBP3780
7W1543 FILTER GP-FUEL Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6I-4940 [1] HOUSING AS-FILTER  
2. 7W-1547 [1] HOUSING-END  
3. 7C-1127 [1] TUBE  
4. 9S-4191 [4] PLUG (9/16-18-THD)  
5. 7C-0592 [2] VALVE-CHECK  
6. 2K-4973 [2] LOCKNUT (3/8-16-THD)  
7. 165-3929 [2] BOLT (3/8-16X1.5-IN)  
8. 031-5744 [1] ELBOW  
9. 7W-1555 [1] TUBE AS  
10. 2K-7979 [2] BUSHING  
11. 5P-2242 [1] TEE-SWIVEL  
14. 7E-3129 [2] COVER  
15. 6V-7238 [2] VALVE-SHUTOFF (DRAIN)  
16. 0S-1588 [1] BOLT (3/8-16X1.25-IN)  
18. 7C-1128 [1] SHAFT AS  
21. 6V-5049 [4] SEAL-O-RING  
22. 5P-7701 [2] SEAL-O-RING  
23. 6V-5055 [4] SEAL-O-RING  
24. 1R-0766 [8] FILTER ELEMENT-FUEL  
25. 7W-8088 [2] RETAINER  
26. 4P-9171 [2] RACK-FUEL FILTER  
27. 2W-6862 [2] SPRING  
28. 8L-2786 [2] SEAL-O-RING  
29. 8J-4455 [1] BALL  
30. 7C-0807 [1] SPRING  
31. 9S-4182 [1] PLUG (7/16-20-THD)  
32. 6V-5048 [2] SEAL-O-RING  
33. 7W-1549 [1] COVER  
34. 5B-9603 [2] BOLT (3/8-16X5-IN)  
35. 1W-4357 [1] PLUG  
36. 7C-1126 [1] VALVE (CHECK)  
37. 8T-2188 [1] SEAL-QUAD RING  
40. 8C-5230 [1] SEAL-O-RING  
41. 3B-1915 [14] BOLT (3/8-16X1.375-IN)  
 

#SEBP37801879
 

122-4590: FILTER GP-PRIMARY FUEL

122-4590 FILTER GP-PRIMARY FUEL (CHG -00 THRU -04, -04D1)
PRIMARY FUEL ACCESSORY MODULE, RH WATER LINES
i00070126 SEBP3780
1224590 FILTER GP-PRIMARY FUEL Parts scheme
  For full view, you need register

Parts for your 3608 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1B-4971 [1] SPACER (0.406X1X1-IN THK)  
3. 4W-5421 J [1] FILTER GP-PRIMARY FUEL  
3A. 4W-2609 [2] FILTER ELEMENT-FUEL  
3B. 2H-4145 [2] SEAL-O-RING  
3C. 8J-6775 [2] SEAL-THREAD  
3D. 5H-6005 [2] SEAL-O-RING  
4. 5R-8798 I [1] HOSE AS  
5. 7C-6289 [1] BRACKET  
6. 7C-6290 [1] BRACKET AS  
  1F-0748 [2] NUT-WELD (1/2-13-THD)  
7. 7C-6400 B [1] TUBE AS  
8. 133-5212 I [1] HOSE AS  
9. 030-7967 B [1] ELBOW  
10. 030-7975 [3] ELBOW  
11. 031-8759 [2] CONNECTOR  
12. 068-4152 [1] UNION-FLARED  
13. 0L-2070 [1] BOLT (3/8-16X2.25-IN)  
14. 0S-1585 [5] BOLT (1/2-13X1.5-IN)  
15. 0S-1591 [1] BOLT (3/8-16X1.5-IN)  
16. 0S-1595 [1] BOLT (1/2-13X1.25-IN)  
17. 1F-7958 [4] NUT-FULL (1/2-13-THD)  
18. 3V-3308 [4] WASHER-HARD (10.2X20.5X2.5-MM THK)  
19. 5P-7815 [2] SEAL-O-RING  
20. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
21. 5P-2369 [1] CLIP (LOOP)  
22. 8S-0023 [1] CLIP (SLOT)  
23. 8S-0024 [1] CLIP (TAB)  
24. 9S-8752 [2] NUT-FULL (3/8-16-THD)  
   
    AVAILABLE REPAIR KIT(S):
  9Y-6898 J [1] KIT-FUEL FILTER  
    (INCLUDES ELEMENT AS-FUEL, SEAL-O-RINGS, SEAL-THREAD, & SPRING)
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

Information:

Engine News
Explanation Of Differences In Timing Advance Information
1981/08/26
New Fuel Nozzle Test Sheet Available
1982/10/20
Bulged Capsule-Type Fuel Nozzles
1982/10/20
Do Not Use A Wire Brush On Fuel Nozzles
1982/10/20
Service Parts Available For The 5P4150 Nozzle Testing Group
1982/12/15
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing
1986/03/01
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle
1986/04/01
Update Information For Caterpillar Fuel Injection Equipment Test Stand
1986/07/01
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil
1987/05/01
Features And Servicing Of The Various Caterpillar 3161 Governors
1987/06/01
Fuel Injector Trim Bolt
1987/06/01
New Gerotor Pump Group Used In 3161 Governors
1988/01/01
Fuel Ratio Control Diaphragms And Settings On 3161 Governors
1988/04/01
New Power Pad Housings With Needle Bearings Used In Fuel Injection Control Groups
1988/04/01
New Procedures To Adjust Woodward EGB29P Governor/Actuator Linkage
1989/01/01
New Installation Procedure For Unit Injectors
1989/05/01
Unit Injector Tips Now Have An Improved Brazing Technique
1990/01/01
New Fuel Injector Group Used On Heavy Fuel Engines
1990/05/01
If Trim Screw On Unit Injector Is Loose, Injector Must Be Replaced
1990/09/01
New 3161 Governor Has Low Idle Offset
1990/09/01
Improved Fuel Injector Control Groups Reduce Control Linkage Wear
1990/09/01
New Procedure To Adjust Woodward EGB29P Governor/Actuator Linkage
1991/01/01
New Procedure To Adjust Woodward 3161 Governor Linkage
1991/01/01
4C6710 Governor Test Unit Group Is Available For 3600 Engines with Heinzmann Governors
1991/05/01
New Speed Setting Clutch Group For 3161 Woodward Governors
1991/06/01
Procedure To Replace Unit Injector Spring{1290}
1991/11/01
New Lip-Type Seal Available For Fuel Transfer Pumps{1256,7555}
1991/12/01
New Valve And Unit Injector Lifter Assemblies Used To Increase Roller Pin Retention
1993/09/01
New Injector Group Without Tip Cooling Passages
1993/09/01
New 3161 Governors{1289}
1994/01/01
Modification For 6V-9057 Rack Synchronizing Gauge{0767,1290}
1994/04/18
New Schedule For Cleaning Unit Injectors In Engines Operating With Heavy Fuel {1290,0374}
1995/03/01
New Schedule For Cleaning Unit Injectors In Engines In Heavy Fuel Oil (HFO) Applications{1290}
1995/11/20
New Seals Used In Valve Mechanism Cover Group{1107,1120}
1996/07/22
Caterpillar High Efficiency Fuel Filters Help Provide Maximum Fuel Pump And Fuel Injector Life {1261}
1996/09/23
New Torque Specification For Some Bolts In Valve Mechanism Groups{1102}
1996/11/01
Unit Injector Clamp Tightening Procedure{1290}
1996/11/01
New Fuel Injector Group Eliminates Corrosion Between Fuel Injector And Cylinder Head{1290}
1997/07/01
New Schedule For Cleaning Unit Injectors In Engines In Heavy Fuel Oil (HFO) Applications {1290}
1997/08/01
Fuel Injector Trim Set Screw {1290}
1997/08/01
New Stud And Nut Replace Unit Injector Hold Down Bolt In Fuel Injection Pump Group {1290}
1998/01/20
6V-9057 Rack Synchronizing Gauge Revised{0767,0782,1290}
1998/06/01
Follow Fuel Changeover Procedure Before Synchronizing Fuel Injectors On Heavy Fuel Oil (HFO) Engines {1250,1274,1280,0374}
1999/07/01
Correct Adjustment Of Fuel Shut-Off Solenoid Shaft Can Prevent Failures
1977/07/13
Identification of Current Fuel Injectors for 3600 Diesel Engines {1290}
2001/06/01
Adjust the Timing Dimension for the New Fuel Injector Groups {1251, 1254, 1290}
2003/06/01
Different Types of Cases are Used on Remanufactured Fuel Injectors for Distillate Diesel Fuel {1250, 1251}
2003/06/01
Do not Use the 6V-4022 Fuel Injector Tester to Test Unit Injectors {0782, 1251, 1254, 1290, 1713}
2008/12/01
Proper Usage of the Adjustment for the Fuel Injector Synchronization on 3600 Diesel Engines with Mechanical Unit Injectors (MUI) {1290}
2009/09/30
A New O-ring Seal Is Used On Fuel Injectors in 3600 and C280 Engines {1251, 1290, 7555}
2011/03/09
New Sequence for Adjusting the Fuel Injectors in 3516, 3516B, and 3516C Engines {1290}
2012/12/21
New Fuel Injector Groups are Used on All 3600 Engines {1251, 1290}
2014/09/19
Operation and Maintenance Manual
Engine Timing, Synchronization, and Valve Lash - Inspect/Adjust
3600 Heavy Fuel Engines
Fuel System Fuel Injector - Clean/Inspect
3600 Heavy Fuel Engines
Fuel System Fuel Injector Tip Cooling Module - Check
3600 Heavy Fuel Engines
Special Instruction
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
"A Series" Governor And Air/Fuel Ratio Control Response And Low Power Test{0374}
Installation of Service Replacement Woodward Governor Group{1264}
Installation of Service Replacement Woodward Governor Group{1264}
Cleaning 3600 Unit Injectors{1290}
Cleaning 3600 Unit Injectors{1290}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Creating Fuel Pump, and Fuel Nozzle Reference Parts for Checking Fuel Pump Test Stands and Nozzle Pop Testers{1254}
Installation Of Governor Spring Guide{1264}
Installation Of Governor Spring Guide{1264}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Repair Of Precombustion Chamber And Direct Injection Adapter Seating Surfaces{1101}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Testing Flat-Seat Fuel Injection Valves Using The 5P4150 Nozzle Testing Group{0782, 1254}
Determining the Fuel Injector Timing Dimension{1250, 1290}
Determining the Fuel Injector Timing Dimension{1250, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Procedure to Properly Tighten the Nuts on the Solenoid Studs on Electronic Unit Injectors (EUI){1290, 1408, 1900}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMAN 3600 INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMAN 3600 INJECTORS FROM DEALERS PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Fuel Injector - Heavy Fuel Oil
3606 and 3608 Engines
Fuel Injector Mechanism
3606 and 3608 Engines
Fuel Injector - Distillate Fuel
3606 and 3608 Engines
Tool Operating Manual
Using the 4C6710 Governor Test Unit Group{0782, 1264}
Using the 4C6710 Governor Test Unit Group{0782, 1264}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMAN 3600 INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMAN 3600 INJECTORS FROM DEALERS PARTS STOCK
Service Letter-Asia
Systems Operation
Fuel Injection Cycle
3606 and 3608 Engines
Fuel Injector
3606 and 3608 Engines
Information Release Memo
CAT REMAN ANNOUNCES THE RELEASE OF AN ELECTRONIC UNIT FUEL INJECTOR FOR CERTAIN 3600 AND C280 ENGINES
CAT REMAN ANNOUNCES THE RELEASE OF AN ELECTRONIC UNIT FUEL INJECTOR FOR CERTAIN 3600 AND C280 ENGINES
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMAN 3600 INJECTORS FROM DEALERS PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING REMAN 3600 INJECTORS FROM DEALERS PARTS STOCK
Testing and Adjusting
Crankshaft Position for Fuel Timing and Valve Lash Adjustment
3606 and 3608 Engines
Fuel Injector Testing
3606 and 3608 Engines
Fuel Timing
3606 and 3608 Engines
Fuel Injector Synchronization
3606 and 3608 Engines
Disassembly and Assembly
Fuel Injector - Remove
3606 and 3608 Engines
Fuel Injector - Install
3606 and 3608 Engines
Service Magazine
New 6V4950 Injection Line Speed Pickup Group Used With 6V2100 Multitach{0651}
1982/05/03
Do Not Use A Wire Brush On Fuel Nozzles{1254}
1982/09/27
New Fuel Nozzle Test Sheet Available{0651,1254}
1982/10/04
Bulged Capsule-Type Fuel Nozzles{1254}
1982/10/11
Service Parts Available For The 5P4150 Nozzle Testing Group{0651,0652}
1982/11/22
Explanation Of Engine High Idle RPM And Correct Adjustment Of Engine Setpoint{1264}
1983/11/07
Valve Lash Adjustment Not A Warranty Item {1102,1105}
1985/01/14
Comparison Of Fuel Timing Tolerances For Field Settings{1250,1251,1281}
1985/10/28
Nylon Seals Used On Lockwire To Seal Critical Areas; Parts Service Seals Available For NACD Dealers{1257,1264}
1986/03/10
Improved Sleeve Bearing Used In Drive End Of Fuel Injection Pump Housing{1253}
1986/03/10
Bleed Screw Washer (Seal) Must Be Replaced If Bleed Screw Removed From Fuel Nozzle{1254}
1986/04/07
Black Nylon Fuel Seals For Lockwire Available Only To NACD Dealers For Certain Customers{1257,1264}
1986/06/09
Update Information For Caterpillar Fuel Injection Equipment Test Stand{0782}
1986/06/16
Changes Have Been Made To OT Microfiche (Fuel Setting And Related Information){1250,1251,1281}
1986/06/16
More Flexible Lockwire Used With Nylon Seals For Sealing Critical Areas{1257,1264}
1986/09/22
Nylon Seals Used On Lockwire To Seal Critical Areas; All Subsidiary Dealers Can Now Order Parts Service Seals {1257,1264}
1986/11/03
New Tie Bars Improve Stability Of The Fuel Injection Test Bench{0652}
1977/01/17
Test Used Fuel Nozzles Before You Install New Nozzles; Tips On Test Procedures{1254,0651,0336}
1977/02/14
With New 5P7448 Adapter, Earlier Fuel Injection Valves And Nozzles Can Be Tested And Adjusted On The 5P4150 Nozzle Testing Group{0651,1254}
1977/10/31
Initial Start Of Engine Using An EGB29P Governor/Actuator After Filling With Oil{1264}
1987/04/13
Fuel Injector Trim Bolt {1257}
1987/06/01
Features And Servicing Of The Various Caterpillar 3161 Governors {1264,1278}
1987/06/01
New Gerotor Pump Group Used In 3161 Governors{1264}
1987/12/21
Probable Causes Of Low Fuel Delivery During Testing On Fuel Injection Test Benches{0650,1250}
1978/02/06
Do Not Use The 5B1401 Cleaning Tool Group To Clean The Orifice In Capsule-Type Fuel Injection Nozzles{0650,1254}
1978/04/24
New Drive Adapters For Fuel Injection Test Bench{0650}
1978/09/11
Use New 6V22 Tool Group To Make Replacement Of Worn Governor Spring Guides{0620}
1978/09/25
Adjustment Procedures And Lubrication Recommendations For Drive Pulleys On Caterpillar Fuel Injection Test Bench{0652}
1978/09/25
Caterpillar Fuel Injection Test Bench Book{0374}
1978/10/16
New FT2253 Cable Assembly Drawing Available For Kent-Moore Fuel Injection Test Bench{0782}
1988/01/04
New Power Pad Housings With Needle Bearings Used In Fuel Injection Control Groups{1264}
1988/03/21
Some Components Of The Variable Pulley And Adjustable Pulley On The Kent-Moore Fuel Injection Test Bench Are Available From Caterpillar{0782}
1988/04/18
Careful, Correct Installation And Maintenance Of Fuel Injection Lines Is Very Important To Prevent Possible Engine Damage, Fire And Other Problems{1252}
1979/04/23
9S8100 Tool Group Changed To Use With Fuel Transfer Pump Only{0622}
1979/05/28
Changes Made To 8S2243 And 8S4613 Wrenches Used On Fuel Injection Pumps{0612,1251}
1979/08/06
General Information -- Diesel Fuels In Cold Temperature Operation{1280}
1979/12/17
New Installation Procedure For Unit Injectors {1290}
1989/05/15
New Collar Used In Fuel Injection Control Groups{1298}
1989/09/18
Unit Injector Tips Now Have An Improved Brazing Technique {1290}
1990/01/15
New Fuel Injector Group Used On Heavy Fuel Engines {1290}
1990/05/07
Field Replacement Of Spacer To Correct Possible Sticking In Woodward 3161 Governor Electric Shutoff Group{1264}
1990/11/19
New Speed Setting Clutch Group For 3161 Woodward Governors{1265}
1991/05/20
Do Not Reuse the Hold Down Bolts for the Fuel Injectors On All Products that Contain C9 Through C32 Engines {1290}
2014/08/14

Caterpillar Parts SIS Catalog 3608 :

FASTENER GP-FUEL INJ PUMP
4W-0690 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
4P-7966 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
4P-7034 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
4P-7032 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
4P-4048 FASTENER GP-FUEL INJ PUMP
FASTENER GP-FUEL INJ PUMP
140-1766 FASTENER GP-FUEL INJ PUMP
DRIVE GP-GOVERNOR
2W-1242 DRIVE GP-GOVERNOR
DRIVE GP-GOVERNOR
1W-0832 DRIVE GP-GOVERNOR
FASTENER GP-FUEL INJ PUMP
7W-0916 FASTENER GP-FUEL INJ PUMP
FASTENER GP-GOVERNOR
112-5051 FASTENER GP-GOVERNOR
FILTER ELEMENT-FUEL
7W-6709 FILTER ELEMENT-FUEL
119-8900 FILTER GP-FUEL
356-3391 FILTER GP-FUEL
FILTER GP-FUEL
4P-0448 FILTER GP-FUEL
FILTER GP-FUEL
7W-1543 FILTER GP-FUEL
FILTER GP-FUEL
7W-1543 FILTER GP-FUEL

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.