AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

180-6018 LINES GP-TURBOCHARGER OIL (CHG -00) PART OF 187-3153 INSTALLATION GP-TURBOCHARGER FOR USE WITH TPL61 FRONT MOUNTED TURBOCHARGERS 3612


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
LUBRICATION SYSTEM
PRELUBRICATION GP-ENGINE

GEN SET ENGINE 3612 GEN SET ENGINE 9RC
 3612 GENERATOR,INDUSTRIAL,LOCOMOTIVE AND MARINE JANUARY 1998 TO CURRENT 9RC00001-UP SEBP3781 3612 9RC   (1986)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
LINES GP-TURBOCHARGER OIL
165-1678 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
165-1678 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
180-6018 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
192-2252 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1W-0879 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
202-8552 LINES GP-TURBOCHARGER OIL
 

#SEBP37811050
 

180-6018: LINES GP-TURBOCHARGER OIL

180-6018 LINES GP-TURBOCHARGER OIL (CHG -00)
PART OF 187-3153 INSTALLATION GP-TURBOCHARGER
FOR USE WITH TPL61 FRONT MOUNTED TURBOCHARGERS
i01519217 SEBP3781
1806018 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3612 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-0385 [2] COVER  
2. 6K-5290 [2] CLIP (TAB)  
3. 7E-5068 [4] CLAMP AS  
4. 7E-5460 [2] RING-RETAINING  
5. 101-3120 [2] SPACER (10.5X25X20-MM THK)  
6. [1] TEE  
7. 180-6578 [1] TUBE AS  
8. 180-6579 [1] TUBE AS  
9. 180-6580 [1] TUBE AS  
10. 180-6581 [1] TUBE AS  
11. 180-8464 [1] TUBE AS  
12. 180-8466 [1] TUBE AS  
13. 197-4974 [2] GASKET  
14. 0S-1571 [2] BOLT (3/8-16X1.75-IN)  
15. 0S-1588 [4] BOLT (3/8-16X1.25-IN)  
16. 0S-1591 [8] BOLT (3/8-16X1.5-IN)  
17. 1A-2029 [4] BOLT (3/8-16X1.125-IN)  
18. 2R-6276 [2] CONNECTOR  
19. 3D-2824 [2] SEAL-O-RING  
20. 3P-0649 [2] SEAL-O-RING  
21. 3P-0650 [2] SEAL-O-RING  
22. 3V-3308 [18] WASHER-HARD (10.2X20.5X2.5-MM THK)  
23. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
24. 5P-9890 [2] SEAL-O-RING  
25. 6K-5291 [2] CLIP (SLOT)  
26. 6V-0973 [1] SEAL-O-RING  
27. 6V-8197 M [4] BOLT (M12X1.75X40-MM)  
28. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
29. 7M-8485 [1] SEAL-O-RING  
30. 9S-4181 [1] PLUG (1-5/16-12-THD)  
31. 9S-7739 [2] UNION-FLARED  
32. 9S-8752 [4] NUT-FULL (3/8-16-THD)  
  M   METRIC PART
 

#SEBP37811051
 

192-2252: LINES GP-TURBOCHARGER OIL

192-2252 LINES GP-TURBOCHARGER OIL (CHG -00, -00D1)
PART OF 192-2251 INSTALLATION GP-TURBOCHARGER
FOR USE WITH THE TPL61 TURBOCHARGER ON REAR MOUNTED APPLICATIONS
i01519301 SEBP3781
1922252 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3612 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-7323 [2] ELBOW  
2. 192-2250 [1] TUBE AS  
3. 192-2257 [1] TUBE AS  
4. 192-2258 [1] TUBE AS  
5. 192-2259 [1] TUBE AS  
6. 192-2260 [1] TUBE AS  
7. 192-2261 [1] TUBE AS  
8. 197-4974 [2] GASKET  
9. 0S-1594 [6] BOLT (3/8-16X1-IN)  
10. 1A-2029 [2] BOLT (3/8-16X1.125-IN)  
11. 3P-0649 [2] SEAL-O-RING  
12. 3V-3308 [2] WASHER-HARD (10.2X20.5X2.5-MM THK)  
13. 4S-6680 [1] CONNECTOR  
14. 5K-9660 [4] CLIP (LOOP)  
15. 5P-5846 [2] SEAL-O-RING  
16. 5P-7701 [1] SEAL-O-RING  
17. 5P-8245 [12] WASHER-HARD (13.5X25.5X3-MM THK)  
18. 5W-9413 [2] SEAL-O-RING  
19. 6V-8197 M [4] BOLT (M12X1.75X40-MM)  
20. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
21. 7D-0978 [1] TEE  
22. 7X-0623 [2] WASHER (10.5X21X2-MM THK)  
23. 8M-9024 [2] WASHER-HARD (10.2X22.5X5-MM THK)  
24. 9S-7739 [2] UNION-FLARED  
25. 180-8468 [2] SCREEN-FILTER  
  M   METRIC PART
 

#SEBP37811052
 

1W-0879: LINES GP-TURBOCHARGER OIL

1W-0879 LINES GP-TURBOCHARGER OIL (CHG -02 THRU -06, -06D1)
i00070748 SEBP3781
1W0879 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3612 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2M-9780 [3] SEAL-O-RING  
2. 6K-4938 [4] CLIP  
3. 6K-4939 [4] CLIP  
4. 0S-1594 [8] BOLT (3/8-16X1-IN)  
5. 3V-3308 [4] WASHER-HARD (10.2X20.5X2.5-MM THK)  
6. 031-4136 [1] TEE-FLARED  
7. 4W-0091 [2] FLANGE  
8. 2B-0947 [4] BOLT (1/2-13X2.25-IN)  
9. 5P-8245 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 3P-0649 [2] SEAL-O-RING  
11. 2W-4028 [1] TUBE AS-SUPPLY  
12. 030-7972 [1] ELBOW  
13. 030-7949 [1] ELBOW  
14. 1W-2577 [2] GASKET  
15. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
16. 4W-7323 [2] ELBOW  
17. 5P-5846 [2] SEAL-O-RING  
18. 6J-2245 [2] SEAL-O-RING  
19. 9M-4584 [1] CONNECTOR  
20. 7W-5275 [1] TUBE AS-SUPPLY  
21. 7W-5282 [1] TUBE AS-DRAIN  
22. 7W-5280 [1] TUBE AS-DRAIN  
23. 4P-7981 [2] BLOCK  
24. 9S-1366 [2] BOLT (1/2-13X2.5-IN)  
 

#SEBP37811053
 

202-8552: LINES GP-TURBOCHARGER OIL

202-8552 LINES GP-TURBOCHARGER OIL (CHG -00, -01)
PART OF 200-1161 INSTALLATION GP-TURBOCHARGER
FOR USE WITH TPS57 DRY BEARING HOUSING ON 3600 DIESEL ENGINES
i01492356 SEBP3781
2028552 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3612 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2577 [2] GASKET  
2. 4W-7323 [2] ELBOW  
3. 194-7752 [1] TUBE AS  
4. 194-7753 [1] TUBE AS  
5. 202-8547 [2] BLOCK  
6. 202-8550 [1] TUBE AS  
7. 202-8551 [1] TUBE AS  
8. 030-7949 [2] ELBOW  
9. 068-6074 [1] CONNECTOR  
10. 0S-1594 [8] BOLT (3/8-16X1-IN)  
11. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
12. 1C-2251 [4] BOLT (3/8-16X1.87-IN)  
13. 3P-0649 [2] SEAL-O-RING  
14. 3V-3308 [4] WASHER-HARD (10.2X20.5X2.5-MM THK)  
15. 5P-1075 [4] WASHER-HARD (10.2X22.5X3-MM THK)  
16. 5P-5846 [2] SEAL-O-RING  
17. 5P-7701 [1] SEAL-O-RING  
18. 5P-8245 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
19. 5P-9757 [2] SEAL-O-RING  
20. 6V-4589 [2] SEAL-O-RING  
21. 9R-1004 [4] CLIP (TAB)  
22. 9R-1005 [4] CLIP (SLOT)  
23. 9S-0176 [1] TEE-SWIVEL  
 

#SEBP37811054
 

258-7579: LINES GP-TURBOCHARGER OIL

258-7579 LINES GP-TURBOCHARGER OIL -REAR (CHG -00)
PART OF 258-2290, 284-8279, 498-1429, 498-5556, 498-5557 TURBOCHARGER GP
i02148165 SEBP3781
2587579 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3612 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-4985 [1] MANIFOLD (OIL INLET)  
2. 164-5469 [2] PLUG  
3. 164-5011 [1] SEAL-O-RING  
4. 163-5498 [4] BOLT (M6X1X35-MM)  
 

#SEBP37811055
 

4P-7959: LINES GP-TURBOCHARGER OIL

4P-7959 LINES GP-TURBOCHARGER OIL (CHG -00 THRU -04)
i00067654 SEBP3781
4P7959 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3612 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1329 [2] BOLT (1/2-13X3-IN)  
2. 6V-4589 [3] SEAL-O-RING  
3. 2W-3790 [1] FLANGE  
4. 2B-0947 [2] BOLT (1/2-13X2.25-IN)  
5. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
6. 4W-0091 [1] FLANGE  
7. 6J-2245 [2] SEAL-O-RING  
8. 152-0112 [1] TUBE AS  
9. 4P-7990 [1] TUBE AS  
10. 9M-4584 [3] CONNECTOR  
11. 0S-1594 [7] BOLT (3/8-16X1-IN)  
12. 3V-3308 [3] WASHER-HARD (10.2X20.5X2.5-MM THK)  
13. 6K-4939 [3] CLIP (STRAIGHT)  
14. 6K-4938 [3] CLIP (CURVED)  
15. 9S-0176 [1] TEE-SWIVEL  
16. 1W-2577 [2] GASKET  
17. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
18. 7W-5280 [1] TUBE AS-DRAIN (LH)  
19. 4W-7323 [2] ELBOW  
20. 7W-5282 [1] TUBE AS-DRAIN (RH)  
21. 3P-0649 [2] SEAL-O-RING  
22. 5P-5846 [2] SEAL-O-RING  
23. 9S-8750 [1] NUT-FULL (1/4-20-THD)  
24. 6V-6758 [1] CLIP  
25. 6K-4935 [1] CLIP (TAB)  
26. 6V-6759 [1] CLIP  
27. 4J-9448 [1] LUG  
28. 5P-9287 [2] WASHER-HARD (7.2X32X2-MM THK)  
29. 1B-2713 [1] BOLT (1/4-20X1.75-IN)  
30. 6K-4934 [1] CLIP (SLOT)  
 

#SEBP37811056
 

4P-7959: LINES GP-TURBOCHARGER OIL

4P-7959 LINES GP-TURBOCHARGER OIL (CHG -05 THRU -08)
PART OF 189-3154 INSTALLATION GP-TURBOCHARGER
i00975971 SEBP3781
4P7959 LINES GP-TURBOCHARGER OIL Parts scheme
  For full view, you need register

Parts for your 3612 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-2577 [2] GASKET  
2. 2W-3790 [1] FLANGE  
3. 4J-9448 [1] LUG  
4. 4W-0091 [1] FLANGE  
5. 4W-7323 [2] ELBOW  
6. 5P-9287 [2] WASHER-HARD (7.2X32X2-MM THK)  
7. 6K-4939 [3] CLIP  
8. 6V-6759 [1] CLIP  
9. 7W-5280 [1] TUBE AS-DRAIN  
10. 7W-5282 [1] TUBE AS-DRAIN  
11. 068-6074 C [1] CONNECTOR  
12. 387-1135 C [1] TUBE AS-OIL  
13. 160-1573 C [1] TUBE AS (RH)  
14. 0S-1594 [7] BOLT (3/8-16X1-IN)  
15. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
16. 1B-2713 [1] BOLT (1/4-20X1.75-IN)  
17. 3P-0649 [2] SEAL-O-RING  
18. 3V-3308 [3] WASHER-HARD (10.2X20.5X2.5-MM THK)  
19. 5P-5846 [2] SEAL-O-RING  
20. 238-5084 C [1] SEAL-O-RING  
21. 5P-8245 [8] WASHER-HARD (13.5X25.5X3-MM THK)  
22. 6J-2245 [2] SEAL-O-RING  
23. 6K-4934 [1] CLIP (SLOT)  
24. 6K-4935 [1] CLIP (TAB)  
25. 6K-4938 [3] CLIP (CURVED)  
26. 238-5081 [2] SEAL-O-RING  
27. 6V-6758 [1] CLIP  
28. 9M-4584 C [2] CONNECTOR  
29. 9S-0176 [1] TEE-SWIVEL  
30. 9S-8750 [1] NUT-FULL (1/4-20-THD)  
31. 9X-8873 [2] BOLT (1/2-13X2.25-IN)  
32. 9X-8874 [2] BOLT (1/2-13X3-IN)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP37811057
 

230-7674: LUBRICATION GP-AUTOMATIC

230-7674 LUBRICATION GP-AUTOMATIC (CHG -01, -02)
GENERATOR
i01971281 SEBP3781
2307674 LUBRICATION GP-AUTOMATIC Parts scheme
  For full view, you need register

Parts for your 3612 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 144-0102 [2] CONTACTOR  
2. 177-7245 Y [1] SENSOR GP-TEMPERATURE (RESISTIVE TEMPERATURE DEVICE)  
3. 222-3758 [1] REGULATOR (OIL PRESSURE)  
4. 222-3759 [1] REGULATOR (OIL PRESSURE)  
5. 222-3766 [1] MOTOR AS  
6. 222-3767 [1] PUMP AS (OIL)  
7. 222-3768 [1] REGULATOR (OIL PRESSURE)  
8. 222-7975 [2] GAUGE-PRESSURE (OIL)  
9. 222-7976 [1] HEAT EXCHANGER  
10. 222-7977 [1] VALVE (THERMOSTATIC)  
11. 222-7978 [1] FILTER-OIL (LUBRICATION)(OIL/SPIN ON)  
12. 224-4150 [1] MODULE GP-LUBRICATION  
13. 233-2671 [1] SWITCH AS (OIL FLOW)  
14. 233-2672 [1] SWITCH AS (OIL FLOW)  
15. 233-2674 [1] FILTER ELEMENT-OIL  
16. 233-2675 [1] STRAINER (OIL)  
17. 233-2676 [2] VALVE (OIL FLOW CONTROL)  
18. 233-2677 [2] VALVE (OIL FLOW CONTROL)  
19. 233-2678 [1] VALVE (OIL FLOW CONTROL)  
20. 233-2679 [1] VALVE-CHECK (OIL FLOW)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37811058
 

318-0042: LUBRICATION GP-AUTOMATIC

318-0042 LUBRICATION GP-AUTOMATIC (CHG -00)
i02940160 SEBP3781
3180042 LUBRICATION GP-AUTOMATIC Parts scheme 3180042 LUBRICATION GP-AUTOMATIC Parts scheme
  For full view, you need register

Parts for your 3612 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-1287 J [1] MOTOR GP-PRELUBRICATION  
2. 7C-3888 H [1] CONTACTOR-TEMPERATURE  
3. 318-0304 [2] PUMP-OIL  
4. 318-0305 [1] MOTOR-ELECTRIC  
5. 318-0306 [1] REGULATOR GP-AIR PRESSURE  
6. 318-0307 [1] VALVE-THERMOSTAT  
7. 318-0308 [1] SPLITTER  
8. 318-0309 [1] VALVE-RELIEF  
9. 318-0310 [1] GAUGE-SIGHT  
10. 318-0311 [1] HOUSING-FILTER  
11. 318-0312 [1] GAUGE-PRESSURE  
12. 318-0313 [1] GAUGE-PRESSURE  
13. 318-0314 [2] THERMOMETER  
14. 318-0315 [1] HEAT EXCHANGER  
15. 318-0317 [1] STRAINER  
16. 318-2971 [3] VALVE-CHECK  
17. 318-3155 [2] VALVE-CONTROL  
18. 318-3776 [1] KIT-HOSE  
    (KIT INCLUDES HOSES & COUPLINGS)
19. 318-6545 [2] FILTER ELEMENT-ENGINE OIL  
   
    AVAILABLE REPAIR KIT(S):
  2W-6083 J [1] KIT-GASKET  
    (KIT INCLUDES GASKETS & O-RING)
  5N-7776 J [1] KIT-MOTOR REPAIR  
    (KIT INCLUDES VANE, VANE SPRINT, PINS, BEARINGS, SEAL, GASKETS & O-RINGS)
  7E-3127 H [1] KIT-SENSOR POCKET (TEMPERATURE CONTROL)  
    (INCLUDES POCKET, RETAINERS, WASHERS, RING, ADAPTER & GAUGE STRIP)
  H   KIT MARKED H SERVICES PART(S) MARKED H
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP37811059
 

287-2015: MOUNTING GP-PUMP

287-2015 MOUNTING GP-PUMP -PRELUBRICATION (CHG -00, -01)
i02525034 SEBP3781
2872015 MOUNTING GP-PUMP Parts scheme
  For full view, you need register

Parts for your 3612 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 287-2018 [2] BRACKET  
2. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
3. 9M-1974 [4] WASHER-HARD (8.8X16X2-MM THK)  
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Procedure To Wash Turbochargers On Engines Powered By Residual Fuel
1989/09/01
Improved Turbocharger Outlet Gasket
1989/10/01
New Turbocharger Gas Inlet Housing Used
1990/07/01
New Turbocharger Groups Reduce Exhaust Leaks
1990/08/01
Specifications And Correct Bolt Torques On Turbochargers
1990/09/01
New Turbocharger Gas Inlet Housings Used
1990/11/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Turbocharger Turbine Nozzle Reusability Information {1052}
1994/09/01
Record Turbocharger Serial Number On Warranty Claims {1052}
1995/04/01
New Turbocharger Bearing Clearance Specifications{1052,1053}
1995/08/01
Turbocharger Cartridge Groups Available For Parts Service{1053,1052}
1995/08/01
Turbocharger Nozzle Cleaning {1052}
1996/01/17
New Turbocharger Wash Water Lines Groups Used{1052}
1996/02/16
Replacement Of Turbocharger Nozzle Ring Bolts{1052}
1996/03/19
Repair Kits Available For Prelube Pump Groups{1319}
1996/04/15
Turbocharger Nozzle Cleaning{1052}
1996/06/12
Turbocharger Water Wash Procedure {1052}
1996/09/23
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1997/06/23
New Turbocharger Wash Water Lines Groups Used {1052}
1997/08/01
New Specification For Clearance Between Turbocharger Turbine Wheel Blades And Turbine Wheel Cover Ring {1052}
1997/08/01
Air Quality Requirements For Turbocharger Air Impingement System {1052}
1997/08/01
Be Sure To Consider Combustion Air Content When Assessing Air Induction System Damage {1051,1058,1063,1087}
1998/02/01
Air Quality Requirements For Turbocharger Air Impingement System{1052}
1998/03/01
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1998/11/01
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1999/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2003/12/01
Improved Sealing for the Turbocharger {1052, 1065}
2012/10/24
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
Improved Support for the Turbocharger {1052}
2006/05/08
List of Caterpillar Service Centers for Napier Turbochargers {1052, 1053}
2012/10/24
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
List of Caterpillar Service Centers for Napier Turbochargers {0374, 1052, 7513}
List of Caterpillar Service Centers for Napier Turbochargers {0374, 1052, 7513}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
3612 and 3616 Fast Vessel Engines
Turbocharger - Water Wash
3600 Heavy Fuel Engines
Turbocharger Nozzle - Clean
3600 Heavy Fuel Engines
Turbocharger - Inspect - Napier Turbocharger - If Equipped
3600 Heavy Fuel Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Information For Use Of 8T3250 3600 Turbo Tool Group{0702, 1052}
Service Information For Use Of 8T3250 3600 Turbo Tool Group{0702, 1052}
Turbocharger Water Wash Procedure{1052}
Turbocharger Water Wash Procedure{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Disassembly And Assembly Of The Napier NA 297 Turbocharger{1052}
Disassembly And Assembly Of The Napier NA 297 Turbocharger{1052}
Disassembly and Assembly of the TPL61 Turbocharger{1052}
Disassembly and Assembly of the TPL61 Turbocharger{1052}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Converting from an ABB Turbocharger to a Napier Turbocharger on 3612 Engines Operating on Diesel Fuel {1052, 1061, 1062, 1063, 1071}
Converting from an ABB Turbocharger to a Napier Turbocharger on 3612 Engines Operating on Diesel Fuel {1052, 1061, 1062, 1063, 1071}
Service Letter-NACD
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Australia
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-CFEL
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-CSARL
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Americas
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Brazil
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Turbine Blades May Shift In Certain C280 And 3600 Engine ABB Turbochargers{1052}
Turbine Blades May Shift In Certain C280 And 3600 Engine ABB Turbochargers{1052}
Specifications
Turbocharger
3612 and 3616 Engines
Turbocharger
3612 and 3616 Engines
Service Letter-China
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Asia
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Systems Operation
Turbocharger
3612 and 3616 Engines
Turbocharger - Napier 297
3612 and 3616 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Service Letter-APD
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Disassembly and Assembly
Turbocharger - Remove
3612 and 3616 Engines
Turbocharger - Install
3612 and 3616 Engines
Turbocharger - Assemble
3612 and 3616 Engines
Turbocharger - Disassemble
3612 and 3616 Engines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Procedure To Wash Turbochargers On Engines Powered By Residual Fuel{1052}
1989/09/18
Improved Turbocharger Outlet Gasket{1052,1061}
1989/09/25
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3612 :

LINES GP-TURBOCHARGER OIL
165-1678 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
165-1678 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
164-4984 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
157-4843 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
157-4843 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
157-4843 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
121-7586 LINES GP-TURBOCHARGER OIL
LINES GP-PRELUBRICATION
7E-6213 LINES GP-PRELUBRICATION
LINES GP-TURBOCHARGER OIL
192-2252 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
1W-0879 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
202-8552 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
258-7579 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4P-7959 LINES GP-TURBOCHARGER OIL
LINES GP-TURBOCHARGER OIL
4P-7959 LINES GP-TURBOCHARGER OIL
LUBRICATION GP-AUTOMATIC
230-7674 LUBRICATION GP-AUTOMATIC
LUBRICATION GP-AUTOMATIC
318-0042 LUBRICATION GP-AUTOMATIC

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.