AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

4P-3101 TURBOCHARGER GP (CHG -00 THRU -02) Type 1 3616 GEN SET ENGINE


AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP

GEN SET ENGINE 3616 GEN SET ENGINE 1PD
 3616 Generator, Industrial and Locomotive 1PD00001-UP SEBP3783 3616 1PD   (1986)

AIR INLET AND EXHAUST SYSTEM

TURBOCHARGER GP
TURBOCHARGER GP
4P-2366 TURBOCHARGER GP
TURBOCHARGER GP
4P-2366 TURBOCHARGER GP
TURBOCHARGER GP
4P-3101 TURBOCHARGER GP
TURBOCHARGER GP
4P-3101 TURBOCHARGER GP
TURBOCHARGER GP
4P-4100 TURBOCHARGER GP
TURBOCHARGER GP
4P-4100 TURBOCHARGER GP
 

#SEBP37832040
 

4P-3101: TURBOCHARGER GP

4P-3101 TURBOCHARGER GP (CHG -00 THRU -02)
Type 1
i00070475 SEBP3783
4P3101 TURBOCHARGER GP Parts scheme 4P3101 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3616 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3668 M [30] BOLT (M12X1.75X30-MM)  
2. 3B-4508 [30] LOCKWASHER  
3. 7W-5857 [1] INSERT  
4. 4W-9029 [2] PLUG  
5. 4W-9027 [2] GASKET  
6. 4W-8576 [1] HOUSING-COMPRESSOR  
7. 7W-5415 [1] WHEEL AS-COMPRESSOR  
8. 4W-8564 [1] RING-SEAL  
9. 9Y-7109 [1] DIFFUSER  
10. 8T-1158 M [3] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
11. 3B-4505 [3] LOCKWASHER  
12. 4W-8577 [1] HOUSING-BEARING  
13. 4W-9033 [1] SEAL-O-RING  
14. 6V-5230 M [6] BOLT (M10X1.5X60-MM)  
15. 4W-9025 [6] WASHER-SPRING  
16. 4W-8683 [1] COVER AS  
17. 4W-9031 [1] SEAL-O-RING  
18. 4W-8561 [1] BEARING AS-COMPRESSOR  
19. 4W-8928 [1] BUSHING-TERMINAL  
20. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
  3B-4504 [4] LOCKWASHER  
21. 7C-3348 [1] BEARING-THRUST  
22. 100-6772 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
23. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
24. 4P-0372 [1] CONE-AIR  
25. 4P-0307 [1] DISC-COVER  
26. 4W-7961 [1] COVER AS  
27. 4W-9032 [1] SEAL-O-RING  
28. 4W-9293 [1] BEARING AS (TURBINE)  
29. 4W-8927 [1] BUSHING-TERMINAL  
30. 8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
31. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
32. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
33. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
34. 3B-4507 [9] LOCKWASHER  
35. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
36. 4W-8563 [1] CAP-TURBOCHARGER  
37. 4P-7945 [1] WHEEL & SHAFT AS  
  4W-8564 [1] RING-SEAL  
38. 4W-9030 M [1] BOLT (M18X1.5X31-MM)  
  4W-8926 [1] WASHER (18.3X40X3.15-MM THK)  
39. 4W-8684 [1] HOUSING  
40. 4W-8607 [1] COVER  
41. 4W-8606 [1] GASKET  
42. 6V-3668 M [40] BOLT (M12X1.75X30-MM)  
43. 4W-8605 [2] GASKET  
44. 4W-8608 [2] COVER  
45. 7E-7093 [2] GASKET  
46. 4W-9533 [2] COVER  
47. 3B-4508 [28] LOCKWASHER  
48. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
49. 4W-8568 [4] SEGMENT  
50. 4W-9036 [2] SUPPORT  
51. 6V-3823 M [4] BOLT (M12X1.75X60-MM)  
52. 4P-2262 [1] NOZZLE  
53. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
54. 8C-8581 M [20] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
55. 4W-8566 [20] PLATE-LOCK (1-MM THK)(THIN)  
56. 4W-9037 [1] COVER-RING  
57. 6B-6863 [1] PIN-SPRING  
58. 4W-8571 [12] PLATE-LOCK (5-MM THK)(THICK)  
59. 4P-0309 [1] HOUSING AS-INLET  
  7E-9691 [1] HOUSING-INLET  
60. 4P-0300 [1] FLANGE-GAS INLET  
61. 7E-9688 [2] CLAMP-SEGMENT  
62. 7E-9689 [4] KEY  
63. 7E-9690 [1] PIN-SPRING  
64. 9X-8275 M [4] BOLT-SOCKET HEAD (M6X1X10-MM)  
65. 9X-8274 M [24] BOLT-HIGH TEMPERATURE (M10X1.5X25-MM)  
66. 7E-9699 [12] RETAINER-BOLT  
  1W-4795 F [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  7B-3028 F [4] SCREW-DRIVE (NO 4X 3/16-IN)  
   
    AVAILABLE REPAIR KIT(S):
  4W-0686 Y [1] KIT-TURBOCHARGER REPAIR  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37832041
 

4P-3101: TURBOCHARGER GP

4P-3101 TURBOCHARGER GP (CHG -03)
Type 2
i00070476 SEBP3783
4P3101 TURBOCHARGER GP Parts scheme 4P3101 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3616 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3668 M [30] BOLT (M12X1.75X30-MM)  
2. 3B-4508 [30] LOCKWASHER  
3. 7W-5857 [1] INSERT  
4. 4W-9029 [2] PLUG  
5. 4W-9027 [2] GASKET  
6. 4W-8576 [1] HOUSING-COMPRESSOR  
7. 4W-8563 [1] CAP-TURBOCHARGER  
8. 100-5321 CY [1] CARTRIDGE GP-TURBOCHARGER  
9. 9Y-7109 [1] DIFFUSER  
10. 8T-1158 M [3] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
11. 3B-4505 [3] LOCKWASHER  
12. 6V-5230 M [6] BOLT (M10X1.5X60-MM)  
13. 4W-9025 [6] WASHER-SPRING  
14. 6B-6863 [1] PIN-SPRING  
15. 4W-8571 [12] PLATE-LOCK (5-MM THK)(THICK)  
16. 4W-8684 [1] HOUSING  
17. 4W-8607 [1] COVER  
18. 4W-8606 [1] GASKET  
19. 6V-3668 M [40] BOLT (M12X1.75X30-MM)  
20. 4W-8605 [2] GASKET  
21. 4W-8608 [2] COVER  
22. 7E-7093 [2] GASKET  
23. 4W-9533 [2] COVER  
24. 3B-4508 [28] LOCKWASHER  
25. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
26. 4W-8568 [4] SEGMENT  
27. 4W-9036 [2] SUPPORT  
28. 6V-3823 M [4] BOLT (M12X1.75X60-MM)  
29. 4P-2262 [1] NOZZLE  
30. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
31. 8C-8581 M [20] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
32. 4W-8566 [20] PLATE-LOCK (1-MM THK)(THIN)  
33. 4W-9037 [1] COVER-RING  
34. 4P-0309 [1] HOUSING AS-INLET  
35. 4P-0300 [1] FLANGE-GAS INLET  
36. 7E-9688 [2] CLAMP-SEGMENT  
37. 7E-9689 [4] KEY  
38. 7E-9690 [1] PIN-SPRING  
39. 9X-8275 M [4] BOLT-SOCKET HEAD (M6X1X10-MM)  
40. 100-6777 M [24] BOLT-HIGH TEMPERATURE (M10X1.5X25-MM)  
41. 7E-9699 [12] RETAINER-BOLT  
  1W-4795 F [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  7B-3028 F [4] SCREW-DRIVE (NO 4X 3/16-IN)  
   
    AVAILABLE REPAIR KIT(S):
  4W-0686 Y [1] KIT-TURBOCHARGER REPAIR  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37832042
 

4P-4100: TURBOCHARGER GP

4P-4100 TURBOCHARGER GP (CHG -00 THRU -02)
Type 1
i00070477 SEBP3783
4P4100 TURBOCHARGER GP Parts scheme 4P4100 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3616 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3668 M [30] BOLT (M12X1.75X30-MM)  
2. 3B-4508 [30] LOCKWASHER  
3. 7W-5857 [1] INSERT  
4. 4W-9029 [2] PLUG  
5. 4W-9027 [2] GASKET  
6. 4W-8576 [1] HOUSING-COMPRESSOR  
7. 7W-5415 [1] WHEEL AS-COMPRESSOR  
8. 4W-8564 [1] RING-SEAL  
9. 9Y-7109 [1] DIFFUSER  
10. 8T-1158 M [3] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
11. 3B-4505 [3] LOCKWASHER  
12. 4W-8577 [1] HOUSING-BEARING  
13. 4W-9033 [1] SEAL-O-RING  
14. 6V-5230 M [6] BOLT (M10X1.5X60-MM)  
15. 4W-9025 [6] WASHER-SPRING  
16. 4W-8683 [1] COVER AS  
17. 4W-9031 [1] SEAL-O-RING  
18. 4W-8561 [1] BEARING AS-COMPRESSOR  
19. 4W-8928 [1] BUSHING-TERMINAL  
20. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
  3B-4504 [4] LOCKWASHER  
21. 7C-3348 [1] BEARING-THRUST  
22. 100-6772 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
23. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
24. 4P-0372 [1] CONE-AIR  
25. 4P-0307 [1] DISC-COVER  
26. 4W-7961 [1] COVER AS  
27. 4W-9032 [1] SEAL-O-RING  
28. 4W-9293 [1] BEARING AS (TURBINE)  
29. 4W-8927 [1] BUSHING-TERMINAL  
30. 8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
31. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
32. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
33. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
34. 3B-4507 [9] LOCKWASHER  
35. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
36. 4W-8563 [1] CAP-TURBOCHARGER  
37. 4P-7945 [1] WHEEL & SHAFT AS  
  4W-8564 [1] RING-SEAL  
38. 4W-9030 M [1] BOLT (M18X1.5X31-MM)  
  4W-8926 [1] WASHER (18.3X40X3.15-MM THK)  
39. 4W-8684 [1] HOUSING  
40. 4W-8607 [1] COVER  
41. 4W-8606 [1] GASKET  
42. 6V-3668 M [40] BOLT (M12X1.75X30-MM)  
43. 4W-8605 [2] GASKET  
44. 4W-8608 [2] COVER  
45. 7E-7093 [2] GASKET  
46. 4W-9533 [2] COVER  
47. 3B-4508 [28] LOCKWASHER  
48. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
49. 4W-8568 [4] SEGMENT  
50. 4W-9036 [2] SUPPORT  
51. 6V-3823 M [4] BOLT (M12X1.75X60-MM)  
52. 4P-4111 [1] NOZZLE  
53. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
54. 8C-8581 M [20] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
55. 4W-8566 [20] PLATE-LOCK (1-MM THK)(THIN)  
56. 4W-9037 [1] COVER-RING  
57. 6B-6863 [1] PIN-SPRING  
58. 4W-8571 [12] PLATE-LOCK (5-MM THK)(THICK)  
59. 4P-0309 [1] HOUSING AS-INLET  
  7E-9691 [1] HOUSING-INLET  
60. 4P-0300 [1] FLANGE-GAS INLET  
61. 7E-9688 [2] CLAMP-SEGMENT  
62. 7E-9689 [4] KEY  
63. 7E-9690 [1] PIN-SPRING  
64. 9X-8275 M [4] BOLT-SOCKET HEAD (M6X1X10-MM)  
65. 9X-8274 M [24] BOLT-HIGH TEMPERATURE (M10X1.5X25-MM)  
66. 7E-9699 [12] RETAINER-BOLT  
  1W-4795 F [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  7B-3028 F [4] SCREW-DRIVE (NO 4X 3/16-IN)  
   
    AVAILABLE REPAIR KIT(S):
  4W-0686 Y [1] KIT-TURBOCHARGER REPAIR  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37832043
 

4P-4100: TURBOCHARGER GP

4P-4100 TURBOCHARGER GP (CHG -03)
Type 2
i00070478 SEBP3783
4P4100 TURBOCHARGER GP Parts scheme 4P4100 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3616 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3668 M [30] BOLT (M12X1.75X30-MM)  
2. 3B-4508 [30] LOCKWASHER  
3. 7W-5857 [1] INSERT  
4. 4W-9029 [2] PLUG  
5. 4W-9027 [2] GASKET  
6. 4W-8576 [1] HOUSING-COMPRESSOR  
7. 4W-8563 [1] CAP-TURBOCHARGER  
8. 100-5321 YC [1] CARTRIDGE GP-TURBOCHARGER  
9. 9Y-7109 [1] DIFFUSER  
10. 8T-1158 M [3] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
11. 3B-4505 [3] LOCKWASHER  
12. 6V-5230 M [6] BOLT (M10X1.5X60-MM)  
13. 4W-9025 [6] WASHER-SPRING  
14. 6B-6863 [1] PIN-SPRING  
15. 4W-8571 [12] PLATE-LOCK (5-MM THK)(THICK)  
16. 4W-8684 [1] HOUSING  
17. 4W-8607 [1] COVER  
18. 4W-8606 [1] GASKET  
19. 6V-3668 M [40] BOLT (M12X1.75X30-MM)  
20. 4W-8605 [2] GASKET  
21. 4W-8608 [2] COVER  
22. 7E-7093 [2] GASKET  
23. 4W-9533 [2] COVER  
24. 3B-4508 [28] LOCKWASHER  
25. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
26. 4W-8568 [4] SEGMENT  
27. 4W-9036 [2] SUPPORT  
28. 6V-3823 M [4] BOLT (M12X1.75X60-MM)  
29. 4P-4111 [1] NOZZLE  
30. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
31. 8C-8581 M [20] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
32. 4W-8566 [20] PLATE-LOCK (1-MM THK)(THIN)  
33. 4W-9037 [1] COVER-RING  
34. 4P-0309 [1] HOUSING AS-INLET  
35. 4P-0300 [1] FLANGE-GAS INLET  
36. 7E-9688 [2] CLAMP-SEGMENT  
37. 7E-9689 [4] KEY  
38. 7E-9690 [1] PIN-SPRING  
39. 9X-8275 M [4] BOLT-SOCKET HEAD (M6X1X10-MM)  
40. 100-6777 M [24] BOLT-HIGH TEMPERATURE (M10X1.5X25-MM)  
41. 7E-9699 [12] RETAINER-BOLT  
  1W-4795 F [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  7B-3028 F [4] SCREW-DRIVE (NO 4X 3/16-IN)  
   
    AVAILABLE REPAIR KIT(S):
  4W-0686 Y [1] KIT-TURBOCHARGER REPAIR  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37832044
 

4P-4100: TURBOCHARGER GP

4P-4100 TURBOCHARGER GP (CHG -04)
Type 3
i00070479 SEBP3783
4P4100 TURBOCHARGER GP Parts scheme 4P4100 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3616 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3668 M [30] BOLT (M12X1.75X30-MM)  
2. 3B-4508 [30] LOCKWASHER  
3. 7W-5857 [1] INSERT  
4. 4W-9029 [2] PLUG  
5. 4W-9027 [2] GASKET  
6. 4W-8576 [1] HOUSING-COMPRESSOR  
7. 4W-9025 [6] WASHER-SPRING  
8. 116-2808 YC [1] CARTRIDGE GP-TURBOCHARGER  
9. 9Y-7109 [1] DIFFUSER  
10. 8T-1158 M [3] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
11. 3B-4505 [3] LOCKWASHER  
12. 6V-5230 M [6] BOLT (M10X1.5X60-MM)  
13. 6B-6863 [1] PIN-SPRING  
14. 4W-8571 [12] PLATE-LOCK (5-MM THK)  
15. 4W-8684 [1] HOUSING  
16. 4W-8607 [1] COVER  
17. 4W-8606 [1] GASKET  
18. 6V-3668 M [40] BOLT (M12X1.75X30-MM)  
19. 4W-8605 [2] GASKET  
20. 4W-8608 [2] COVER  
21. 7E-7093 [2] GASKET  
22. 4W-9533 [2] COVER  
23. 3B-4508 [28] LOCKWASHER  
24. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
25. 4W-8568 [4] SEGMENT  
26. 4W-9036 [2] SUPPORT  
27. 6V-3823 M [4] BOLT (M12X1.75X60-MM)  
28. 4P-4111 [1] NOZZLE  
29. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
30. 8C-8581 M [20] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
31. 4W-8566 [20] PLATE-LOCK (1-MM THK)  
32. 4W-9037 [1] COVER-RING  
33. 4P-0309 [1] HOUSING AS-INLET  
34. 4P-0300 [1] FLANGE-GAS INLET  
35. 7E-9688 [2] CLAMP-SEGMENT  
36. 7E-9689 [4] KEY  
37. 7E-9690 [1] PIN-SPRING  
38. 9X-8275 M [4] BOLT-SOCKET HEAD (M6X1X10-MM)  
39. 100-6777 M [24] BOLT-HIGH TEMPERATURE (M10X1.5X25-MM)  
40. 7E-9699 [12] RETAINER-BOLT  
   
    AVAILABLE REPAIR KIT(S):
  4W-0686 Y [1] KIT-TURBOCHARGER REPAIR  
    (INCLUDES GASKET, SEAL-O-RINGS, & SEAL KIT-TURBO)
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37832045
 

4P-4100: TURBOCHARGER GP

4P-4100 TURBOCHARGER GP (CHG -05, -06)
Type 4
i00114390 SEBP3783
4P4100 TURBOCHARGER GP Parts scheme 4P4100 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3616 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3668 CM [39] BOLT (M12X1.75X30-MM)  
2. 3B-4508 C [39] LOCKWASHER  
3. 7W-5857 [1] INSERT  
4. 4W-9029 [2] PLUG  
5. 4W-9027 [2] GASKET  
6. 130-1860 C [1] HOUSING-COMPRESSOR  
7. 4W-9025 [6] WASHER-SPRING  
8. 116-2808 Y [1] CARTRIDGE GP-TURBOCHARGER  
9. 9Y-7109 [1] DIFFUSER  
10. 8T-1158 M [3] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
11. 3B-4505 [3] LOCKWASHER  
12. 6V-5230 M [6] BOLT (M10X1.5X60-MM)  
13. 6B-6863 [1] PIN-SPRING  
14. 4W-8571 [12] PLATE-LOCK (5-MM THK)  
15. 131-3708 C [1] HOUSING-TURBINE  
16. 4W-8607 [1] COVER  
17. 4W-8606 [1] GASKET  
18. 6V-3668 M [40] BOLT (M12X1.75X30-MM)  
19. 4W-8605 [2] GASKET  
20. 4W-8608 [2] COVER  
21. 7E-7093 [2] GASKET  
22. 4W-9533 [2] COVER  
23. 3B-4508 [28] LOCKWASHER  
24. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
25. 4W-8568 [4] SEGMENT  
26. 4W-9036 [2] SUPPORT  
27. 6V-3823 M [4] BOLT (M12X1.75X60-MM)  
28. 4P-4111 [1] NOZZLE  
29. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
30. 8C-8581 M [12] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
31. 4W-8566 [20] PLATE-LOCK (1-MM THK)  
32. 4W-9037 [1] COVER-RING  
33. 4P-0309 [1] HOUSING AS-INLET  
34. 4P-0300 [1] FLANGE-GAS INLET  
35. 7E-9688 [2] CLAMP-SEGMENT  
36. 7E-9689 [4] KEY  
37. 7E-9690 [1] PIN-SPRING  
38. 9X-8275 M [4] BOLT-SOCKET HEAD (M6X1X10-MM)  
39. 100-6777 M [24] BOLT-HIGH TEMPERATURE (M10X1.5X25-MM)  
40. 7E-9699 [12] RETAINER-BOLT  
41. 156-2687 M [8] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
   
    AVAILABLE REPAIR KIT(S):
  4W-0686 Y [1] KIT-TURBOCHARGER REPAIR  
    (INCLUDES GASKET, SEAL-O-RINGS & SEAL KIT-TURBO)
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37832046
 

4P-7010: TURBOCHARGER GP

4P-7010 TURBOCHARGER GP (CHG -00)
Type 1
i00070489 SEBP3783
4P7010 TURBOCHARGER GP Parts scheme 4P7010 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3616 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3668 M [30] BOLT (M12X1.75X30-MM)  
2. 3B-4508 [30] LOCKWASHER  
3. 7W-0339 [1] INSERT  
4. 4W-9029 [2] PLUG  
5. 4W-9027 [2] GASKET  
6. 4W-8576 [1] HOUSING-COMPRESSOR  
7. 7W-0340 [1] WHEEL AS-COMPRESSOR  
8. 4W-8564 [1] RING-SEAL  
9. 9Y-7111 [1] DIFFUSER  
10. 8T-1158 M [3] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
11. 3B-4505 [3] LOCKWASHER  
12. 4W-8577 [1] HOUSING-BEARING  
13. 4W-9033 [1] SEAL-O-RING  
14. 6V-5230 M [6] BOLT (M10X1.5X60-MM)  
15. 4W-9025 [6] WASHER-SPRING  
16. 4W-8683 [1] COVER AS  
17. 4W-9031 [1] SEAL-O-RING  
18. 4W-8561 [1] BEARING AS-COMPRESSOR  
19. 4W-8928 [1] BUSHING-TERMINAL  
20. 8T-0267 M [4] BOLT-SOCKET HEAD (M6X1X12-MM)  
  3B-4504 [4] LOCKWASHER  
21. 7C-3348 [1] BEARING-THRUST  
22. 9X-6617 M [12] BOLT-HIGH TEMPERATURE (M8X1.25X16-MM)  
23. 4W-8573 [12] PLATE-LOCK (0.8-MM THK)  
24. 4P-0372 [1] CONE-AIR  
25. 4P-0307 [1] DISC-COVER  
26. 4W-7961 [1] COVER AS  
27. 4W-9032 [1] SEAL-O-RING  
28. 4W-9293 [1] BEARING AS (TURBINE)  
29. 4W-8927 [1] BUSHING-TERMINAL  
30. 8T-0267 M [3] BOLT-SOCKET HEAD (M6X1X12-MM)  
31. 8C-8581 M [3] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
32. 4W-8572 [3] PLATE-LOCK (1-MM THK)  
33. 8T-1159 M [3] BOLT-SOCKET HEAD (M10X1.5X25-MM)  
34. 3B-4507 [9] LOCKWASHER  
35. 8T-1160 M [6] BOLT-SOCKET HEAD (M10X1.5X50-MM)  
36. 4P-7017 [1] WHEEL & SHAFT AS  
  4W-8564 [1] RING-SEAL  
37. 4W-9030 M [1] BOLT (M18X1.5X31-MM)  
  4W-8926 [1] WASHER (18.3X40X3.15-MM THK)  
38. 4W-8684 [1] HOUSING  
39. 4W-8607 [1] COVER  
40. 4W-8606 [1] GASKET  
41. 6V-3668 M [40] BOLT (M12X1.75X30-MM)  
42. 4W-8605 [2] GASKET  
43. 4W-8608 [2] COVER  
44. 7E-7093 [2] GASKET  
45. 4W-9533 [2] COVER  
46. 3B-4508 [28] LOCKWASHER  
47. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
48. 4W-8568 [4] SEGMENT  
49. 4W-9036 [2] SUPPORT  
50. 6V-3823 M [4] BOLT (M12X1.75X60-MM)  
51. 7C-5843 [1] NOZZLE  
52. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
53. 8C-8581 M [20] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
54. 4W-8566 [20] PLATE-LOCK (1-MM THK)(THIN)  
55. 7W-0342 [1] COVER-RING  
56. 6B-6863 [1] PIN-SPRING  
57. 4W-8571 [12] PLATE-LOCK (5-MM THK)(THICK)  
58. 4P-0309 [1] HOUSING AS-INLET  
59. 7E-9691 [1] HOUSING-INLET  
60. 4P-0300 [1] FLANGE-GAS INLET  
61. 7E-9688 [2] CLAMP-SEGMENT  
62. 7E-9689 [4] KEY  
63. 7E-9690 [1] PIN-SPRING  
64. 9X-8275 M [4] BOLT-SOCKET HEAD (M6X1X10-MM)  
65. 9X-8274 M [24] BOLT-HIGH TEMPERATURE (M10X1.5X25-MM)  
66. 7E-9699 [12] RETAINER-BOLT  
   
    AVAILABLE REPAIR KIT(S):
  4W-0686 Y [1] KIT-TURBOCHARGER REPAIR  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37832047
 

4P-7010: TURBOCHARGER GP

4P-7010 TURBOCHARGER GP (CHG -01)
Type 2
i00070490 SEBP3783
4P7010 TURBOCHARGER GP Parts scheme 4P7010 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3616 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3668 M [30] BOLT (M12X1.75X30-MM)  
2. 3B-4508 [30] LOCKWASHER  
3. 7W-0339 [1] INSERT  
4. 4W-9029 [2] PLUG  
5. 4W-9027 [2] GASKET  
6. 4W-8576 [1] HOUSING-COMPRESSOR  
7. 4W-8563 [1] CAP-TURBOCHARGER  
8. 100-5307 Y [1] CARTRIDGE GP-TURBOCHARGER  
9. 9Y-7111 [1] DIFFUSER  
10. 8T-1158 M [3] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
11. 3B-4505 [3] LOCKWASHER  
12. 6V-5230 M [6] BOLT (M10X1.5X60-MM)  
13. 4W-9025 [6] WASHER-SPRING  
14. 6B-6863 [1] PIN-SPRING  
15. 4W-8571 [12] PLATE-LOCK (5-MM THK)(THICK)  
16. 4W-8684 [1] HOUSING  
17. 4W-8607 [1] COVER  
18. 4W-8606 [1] GASKET  
19. 6V-3668 M [40] BOLT (M12X1.75X30-MM)  
20. 4W-8605 [2] GASKET  
21. 4W-8608 [2] COVER  
22. 7E-7093 [2] GASKET  
23. 4W-9533 [2] COVER  
24. 3B-4508 [28] LOCKWASHER  
25. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
26. 4W-8568 [4] SEGMENT  
27. 4W-9036 [2] SUPPORT  
28. 6V-3823 M [4] BOLT (M12X1.75X60-MM)  
29. 7C-5843 [1] NOZZLE  
30. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
31. 8C-8581 M [20] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
32. 4W-8566 [20] PLATE-LOCK (1-MM THK)(THIN)  
33. 7W-0342 [1] COVER-RING  
34. 4P-0309 [1] HOUSING AS-INLET  
35. 4P-0300 [1] FLANGE-GAS INLET  
36. 7E-9688 [2] CLAMP-SEGMENT  
37. 7E-9689 [4] KEY  
38. 7E-9690 [1] PIN-SPRING  
39. 9X-8275 M [4] BOLT-SOCKET HEAD (M6X1X10-MM)  
40. 100-6777 M [24] BOLT-HIGH TEMPERATURE (M10X1.5X25-MM)  
41. 7E-9699 [12] RETAINER-BOLT  
  1W-4795 F [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  7B-3028 F [1] SCREW-DRIVE (NO 4X 3/16-IN)  
   
    AVAILABLE REPAIR KIT(S):
  4W-0686 Y [1] KIT-TURBOCHARGER REPAIR  
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37832048
 

4P-7010: TURBOCHARGER GP

4P-7010 TURBOCHARGER GP (CHG -02)
Type 3
i00070491 SEBP3783
4P7010 TURBOCHARGER GP Parts scheme 4P7010 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3616 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3668 M [30] BOLT (M12X1.75X30-MM)  
2. 3B-4508 [30] LOCKWASHER  
3. 7W-0339 [1] INSERT  
4. 4W-9029 [2] PLUG  
5. 4W-9027 [2] GASKET  
6. 4W-8576 [1] HOUSING-COMPRESSOR  
7. 4W-9025 [6] WASHER-SPRING  
8. 118-2482 YC [1] CARTRIDGE GP-TURBOCHARGER  
9. 9Y-7111 [1] DIFFUSER  
10. 8T-1158 M [3] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
11. 3B-4505 [3] LOCKWASHER  
12. 6V-5230 M [6] BOLT (M10X1.5X60-MM)  
13. 6B-6863 [1] PIN-SPRING  
14. 4W-8571 [12] PLATE-LOCK (5-MM THK)(THICK)  
15. 4W-8684 [1] HOUSING  
16. 4W-8607 [1] COVER  
17. 4W-8606 [1] GASKET  
18. 6V-3668 M [40] BOLT (M12X1.75X30-MM)  
19. 4W-8605 [2] GASKET  
20. 4W-8608 [2] COVER  
21. 7E-7093 [2] GASKET  
22. 4W-9533 [2] COVER  
23. 3B-4508 [28] LOCKWASHER  
24. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
25. 4W-8568 [4] SEGMENT  
26. 4W-9036 [2] SUPPORT  
27. 6V-3823 M [4] BOLT (M12X1.75X60-MM)  
28. 7C-5843 [1] NOZZLE  
29. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
30. 8C-8581 M [20] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
31. 4W-8566 [20] PLATE-LOCK (1-MM THK)(THIN)  
32. 7W-0342 [1] COVER-RING  
33. 4P-0309 [1] HOUSING AS-INLET  
34. 4P-0300 [1] FLANGE-GAS INLET  
35. 7E-9688 [2] CLAMP-SEGMENT  
36. 7E-9689 [4] KEY  
37. 7E-9690 [1] PIN-SPRING  
38. 9X-8275 M [4] BOLT-SOCKET HEAD (M6X1X10-MM)  
39. 100-6777 M [24] BOLT-HIGH TEMPERATURE (M10X1.5X25-MM)  
40. 7E-9699 [12] RETAINER-BOLT  
  1W-4795 F [1] PLATE-IDENTIFICATION (TURBOCHARGER CARTRIDGE)  
  7B-3028 F [1] SCREW-DRIVE (NO 4X 3/16-IN)  
   
    AVAILABLE REPAIR KIT(S):
  4W-0686 Y [1] KIT-TURBOCHARGER REPAIR  
  C   CHANGE FROM PREVIOUS TYPE
  F   NOT SHOWN
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP37832049
 

4P-7010: TURBOCHARGER GP

4P-7010 TURBOCHARGER GP (CHG -03, -04)
Type 4
i00115006 SEBP3783
4P7010 TURBOCHARGER GP Parts scheme 4P7010 TURBOCHARGER GP Parts scheme
  For full view, you need register

Parts for your 3616 GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6V-3668 CM [39] BOLT (M12X1.75X30-MM)  
2. 3B-4508 C [39] LOCKWASHER  
3. 7W-0339 [1] INSERT  
4. 4W-9029 [2] PLUG  
5. 4W-9027 [2] GASKET  
6. 130-1860 C [1] HOUSING-COMPRESSOR  
7. 4W-9025 [6] WASHER-SPRING  
8. 118-2482 Y [1] CARTRIDGE GP-TURBOCHARGER  
9. 9Y-7111 [1] DIFFUSER  
10. 8T-1158 M [3] BOLT-SOCKET HEAD (M8X1.25X20-MM)  
11. 3B-4505 [3] LOCKWASHER  
12. 6V-5230 M [6] BOLT (M10X1.5X60-MM)  
13. 6B-6863 [1] PIN-SPRING  
14. 4W-8571 [12] PLATE-LOCK (5-MM THK)  
15. 131-3708 C [1] HOUSING-TURBINE  
16. 4W-8607 [1] COVER  
17. 4W-8606 [1] GASKET  
18. 6V-3668 M [40] BOLT (M12X1.75X30-MM)  
19. 4W-8605 [2] GASKET  
20. 4W-8608 [2] COVER  
21. 7E-7093 [2] GASKET  
22. 4W-9533 [2] COVER  
23. 3B-4508 [28] LOCKWASHER  
24. 0S-1595 [4] BOLT (1/2-13X1.25-IN)  
25. 4W-8568 [4] SEGMENT  
26. 4W-9036 [2] SUPPORT  
27. 6V-3823 M [4] BOLT (M12X1.75X60-MM)  
28. 7C-5843 [1] NOZZLE  
29. 6V-8675 M [8] BOLT (M12X1.75X35-MM)  
30. 8C-8581 M [12] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
31. 4W-8566 [20] PLATE-LOCK (1-MM THK)  
32. 7W-0342 [1] COVER-RING  
33. 4P-0309 [1] HOUSING AS-INLET  
34. 4P-0300 [1] FLANGE-GAS INLET  
35. 7E-9688 [2] CLAMP-SEGMENT  
36. 7E-9689 [4] KEY  
37. 7E-9690 [1] PIN-SPRING  
38. 9X-8275 M [4] BOLT-SOCKET HEAD (M6X1X10-MM)  
39. 100-6777 M [24] BOLT-HIGH TEMPERATURE (M10X1.5X25-MM)  
40. 7E-9699 [12] RETAINER-BOLT  
41. 156-2687 M [8] BOLT-HIGH TEMPERATURE (M10X1.5X30-MM)  
   
    AVAILABLE REPAIR KIT(S):
  4W-0686 Y [1] KIT-TURBOCHARGER REPAIR  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning
1979/08/22
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect
1986/02/01
Stop Engine If There Is A Turbocharger Bearing Failure
1987/04/01
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies
1987/09/01
Procedure To Wash Turbochargers On Engines Powered By Residual Fuel
1989/09/01
Improved Turbocharger Outlet Gasket
1989/10/01
Improved Turbocharger Wash Water Lines Group Available On Engines Powered By Residual (Heavy) Fuel
1989/12/01
New Turbocharger Gas Inlet Housing Used
1990/07/01
New Turbocharger Groups Reduce Exhaust Leaks
1990/08/01
New Turbocharger Groups Have Turbines with Round Dampening Wire Holes for Longer Service Life
1990/09/01
Specifications And Correct Bolt Torques On Turbochargers
1990/09/01
New Turbocharger Gas Inlet Housings Used
1990/11/01
Compressor Nut Torque For Schwitzer Turbochargers
1993/07/01
Turbocharger Turbine Nozzle Reusability Information {1052}
1994/09/01
Record Turbocharger Serial Number On Warranty Claims {1052}
1995/04/01
New Turbocharger Bearing Clearance Specifications{1052,1053}
1995/08/01
Turbocharger Cartridge Groups Available For Parts Service{1053,1052}
1995/08/01
Turbocharger Nozzle Cleaning {1052}
1996/01/17
New Turbocharger Wash Water Lines Groups Used{1052}
1996/02/16
Replacement Of Turbocharger Nozzle Ring Bolts{1052}
1996/03/19
Repair Kits Available For Prelube Pump Groups{1319}
1996/04/15
Turbocharger Nozzle Cleaning{1052}
1996/06/12
Turbocharger Water Wash Procedure {1052}
1996/09/23
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1997/06/23
New Turbocharger Wash Water Lines Groups Used {1052}
1997/08/01
New Specification For Clearance Between Turbocharger Turbine Wheel Blades And Turbine Wheel Cover Ring {1052}
1997/08/01
Air Quality Requirements For Turbocharger Air Impingement System {1052}
1997/08/01
Be Sure To Consider Combustion Air Content When Assessing Air Induction System Damage {1051,1058,1063,1087}
1998/02/01
Air Quality Requirements For Turbocharger Air Impingement System{1052}
1998/03/01
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1998/11/01
Worldwide Listing Of ABB Turbocharger Service Stations {1052}
1999/07/01
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels
1977/03/15
Silicone Grease Now Used In Seal Ring Groove In Turbochargers
1978/05/24
Improved Seal Rings For Turbine End Of Turbochargers
1978/07/05
Salvage Of Turbocharger Compressor Housing During Reconditioning
1978/10/18
New Turbochargers Are Used In Certain 3608 and 3616 Applications {1052}
2012/10/24
Turbocharger Compressor Bypass Valve is used on 3616 Engines {1081}
2002/02/01
New Connectors With An Orifice Are Used In The Turbocharger Oil Lines Groups {7553}
2002/10/01
A Revised Special Instruction Provides Information on Service Replacement of the Turbocharger (for Turbocharged Engines Only) {1052}
2003/03/01
Policy for Reusing the Turbocharger Turbine Housing {1052, 1065, 7754}
2003/07/01
Prevent the Possibility of Contamination in order to Ensure Longer Life of Turbochargers {1052}
2004/04/01
Improved Sealing for the Turbocharger {1052, 1065}
2012/11/09
Magnetic Cover for the Turbocharger Oil Supply Line {1052, 1307}
2006/02/06
A New Maintenance Kit is Available for the Turbocharger {1052}
2005/10/03
List of Caterpillar Service Centers for Napier Turbochargers {1052, 1053}
2009/01/05
Troubleshooting the Wastegate Canister {1052, 1057}
2008/12/22
A New Support Bracket Is Used for the Air Inlet Housing on 3616 and C280-16 Engines {1052, 1071}
2010/09/17
A New Air Inlet Housing and Support Bracket Are Used on 3616 and C280-16 Engines {1052, 1071}
2012/02/27
List of Caterpillar Service Centers for Napier Turbochargers {0374, 1052, 7513}
List of Caterpillar Service Centers for Napier Turbochargers {0374, 1052, 7513}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Turbocharger - Inspect
3612 and 3616 Fast Vessel Engines
Turbocharger - Water Wash
3600 Heavy Fuel Engines
Turbocharger Nozzle - Clean
3600 Heavy Fuel Engines
Turbocharger - Inspect - Napier Turbocharger - If Equipped
3600 Distillate Fuel Engines
Special Instruction
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Installation of 7C9760 (12V) or 8N3569 (24V) Fuel Boost Pump Group{1250, 1256, 1260}
Service Information For Use Of 8T3250 3600 Turbo Tool Group{0702, 1052}
Service Information For Use Of 8T3250 3600 Turbo Tool Group{0702, 1052}
Turbocharger Water Wash Procedure{1052}
Turbocharger Water Wash Procedure{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Disassembly And Assembly Of The Napier NA 297 Turbocharger{1052}
Disassembly And Assembly Of The Napier NA 297 Turbocharger{1052}
Installation And Operation Of The 150-7700 Tachometer/Speed Switch{7499}
Installation And Operation Of The 150-7700 Tachometer/Speed Switch{7499}
Installation Instructions for Turbochargers {1052}
Installation Instructions for Turbochargers {1052}
Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065}
Applying Sealant For Improved Sealing of The Turbocharger{1052, 1065}
Converting from the ABB Turbocharger to the Napier Turbocharger{1052, 1061, 1062, 1063, 1071}
Converting from the ABB Turbocharger to the Napier Turbocharger{1052, 1061, 1062, 1063, 1071}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Converting from an ABB Turbocharger to a Napier Turbocharger on 3616 Engines Operating on Residual Fuel{1052, 1053, 1063}
Converting from an ABB Turbocharger to a Napier Turbocharger on 3616 Engines Operating on Residual Fuel{1052, 1053, 1063}
Service Letter-NACD
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Australia
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-CFEL
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-CSARL
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Americas
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Brazil
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
Service Letter-Truck/Ag/Marine
Technical Information Bulletin
Turbine Blades May Shift In Certain C280 And 3600 Engine ABB Turbochargers{1052}
Turbine Blades May Shift In Certain C280 And 3600 Engine ABB Turbochargers{1052}
Specifications
Turbocharger
3612 and 3616 Engines
Turbocharger
3612 and 3616 Engines
Service Letter-China
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Service Letter-Asia
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Systems Operation
Turbocharger
3612 and 3616 Engines
Turbocharger - Napier 297
3612 and 3616 Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Service Letter-APD
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
Blocks And Clamps Need To Be Installed To Support The Turbocharger Oil Supply Tube On Certain 3612 And 3616 Engines With Vertical Mounted Exhaust Piping
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
The Turbocharger Compressor Housing Bolts Need To Be Changed On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
New Bolts And Lockwashers Need To Be Installed On The Turbocharger On Certain 3606, 3608, 3612 And 3616 Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
Product Support Program For Replacing The Turbo Wash Lines Groups On Certain 3606, 3608, 3612, And 3616 Heavy Fuel Operation (HFO) Engines
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING TURBOCHARGERS ON CERTAIN 3606, 3608, 3612, 3616, 3618, C280-6, AND C280-12 ENGINES
Disassembly and Assembly
Turbocharger - Remove
3612 and 3616 Engines
Turbocharger - Install
3612 and 3616 Engines
Turbocharger - Assemble
3612 and 3616 Engines
Turbocharger - Disassemble
3612 and 3616 Engines
Turbocharger - Assemble
3612 and 3616 Engines
Turbocharger Cartridge - Remove
3612 and 3616 Engines
Turbocharger Cartridge - Install
3612 and 3616 Engines
Turbocharger - Disassemble
3612 and 3616 Engines
Service Magazine
Caterpillar Recommends Against The Use Of Alcohol Mist Injection Systems{1050,1250}
1982/06/28
Use Care When Handling Turbocharger Compressor Wheels{1052,1077}
1985/12/16
Special Instructions Packaged With Turbocharger Cartridge Repair Kits May Be Incorrect{1053}
1986/02/03
Determining The Cause Of Glow Plug Tip Failures{1053,1105,1412}
1986/06/02
Changes To Retainer Nut Torque And Assembly Procedures For Turbocharger Compressor Wheels{0374,1052}
1977/02/28
Stop Engine If There Is A Turbocharger Bearing Failure{1052,1318}
1987/04/06
Be Sure To Correctly Tighten Turbocharger Clamp Assemblies{1052}
1987/09/07
Silicone Grease Now Used In Seal Ring Groove In Turbochargers{1052,1053,1077}
1978/05/15
Improved Seal Rings For Turbine End Of Turbochargers{1052}
1978/07/03
Salvage Of Turbocharger Compressor Housing During Reconditioning{1052}
1978/10/09
Use Of 9S3265 Retaining Compound On Schwitzer Turbocharger Compressor Wheel Retainer Nuts{1052,1053}
1979/06/25
Turbocharger Bearings Are Now Available In More Different Sizes For Better Turbocharger Reconditioning{1053}
1979/08/20
Only One Dowel Pin Is Now Used To Hold The Thrust Bearing In The Correct Position{1053,1052}
1979/09/03
6V2055 High Vacuum Grease Gives Better Oil Seal {1052,1053,1077,0682}
1979/09/10
Different Thrust Bearing And Thrust Rings Now Used In Turbochargers{1052,1053}
1979/10/22
Procedure To Wash Turbochargers On Engines Powered By Residual Fuel{1052}
1989/09/18
Improved Turbocharger Outlet Gasket{1052,1061}
1989/09/25
Improved Turbocharger Wash Water Lines Group Available On Engines Powered By Residual (Heavy) Fuel{1052}
1989/11/27
Compressor Nut Torque For Schwitzer Turbochargers{1052}
1993/07/26
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}

Caterpillar Parts SIS Catalog 3616 :

TURBOCHARGER GP
4P-2366 TURBOCHARGER GP
TURBOCHARGER GP
4P-2366 TURBOCHARGER GP
TURBOCHARGER GP
4P-2366 TURBOCHARGER GP
TURBOCHARGER GP
4P-2366 TURBOCHARGER GP
TURBOCHARGER GP
4P-2259 TURBOCHARGER GP
TURBOCHARGER GP
4P-2259 TURBOCHARGER GP
TURBOCHARGER GP
4P-2259 TURBOCHARGER GP
TURBOCHARGER GP
4P-2259 TURBOCHARGER GP
TURBOCHARGER GP
4P-3101 TURBOCHARGER GP
TURBOCHARGER GP
4P-4100 TURBOCHARGER GP
TURBOCHARGER GP
4P-4100 TURBOCHARGER GP
TURBOCHARGER GP
4P-4100 TURBOCHARGER GP
TURBOCHARGER GP
4P-4100 TURBOCHARGER GP
TURBOCHARGER GP
4P-7010 TURBOCHARGER GP
TURBOCHARGER GP
4P-7010 TURBOCHARGER GP
TURBOCHARGER GP
4P-7010 TURBOCHARGER GP

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.