AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

218-3893 PRECHAMBER GP (CHG -08, -09) Type 2 G3606B GAS ENGINE


BASIC ENGINE
CYLINDER HEAD GP
PUMP GP-GEAR
VALVE MECHANISM GP
CRANKSHAFT GP
SHAFT GP-STUB

GAS ENGINE G3606B GAS ENGINE 4ZS
 G3606 INDUSTRIAL 4ZS00001-UP SEBP3792 G3606B 4ZS   (1998)

BASIC ENGINE

CYLINDER HEAD GP
PRECHAMBER GP
117-4911 PRECHAMBER GP
PRECHAMBER GP
218-3893 PRECHAMBER GP
PRECHAMBER GP
218-3893 PRECHAMBER GP
PRECHAMBER GP
218-3893 PRECHAMBER GP
PRECHAMBER GP
218-3902 PRECHAMBER GP
PRECHAMBER GP
218-3907 PRECHAMBER GP
 

#SEBP37922120
 

218-3893: PRECHAMBER GP

218-3893 PRECHAMBER GP (CHG -08, -09)
Type 2
i06268073 SEBP3792
2183893 PRECHAMBER GP Parts scheme
  For full view, you need register

Parts for your G3606B GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 479-7703 Y [1] PRECHAMBER GP  
2. 275-4011 [2] SPACER (15.5X29X62.5-MM THK)  
3. 370-0555 [1] GASKET  
4. 5P-4889 [1] SEAL-O-RING  
5. 6J-2244 [1] SEAL-O-RING  
6. 6V-1179 [1] SEAL-O-RING  
7. 6V-4368 [1] SEAL-O-RING  
8. 7D-1649 [2] WASHER-HARD (13.5X32X5-MM THK)  
9. 8D-0648 [2] BOLT-12 POINT HEAD (1/2-13X4.5-IN)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP37922121
 

218-3893: PRECHAMBER GP

218-3893 PRECHAMBER GP (CHG -10)
Type 3
i07501441 SEBP3792
2183893 PRECHAMBER GP Parts scheme
  For full view, you need register

Parts for your G3606B GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 330-1782 C [1] PRECHAMBER AS  
2. 275-4011 [2] SPACER (15.5X29X62.5-MM THK)  
3. 370-0555 [1] GASKET  
4. 5P-4889 [1] SEAL-O-RING  
5. 6J-2244 [1] SEAL-O-RING  
6. 6V-1179 [1] SEAL-O-RING  
7. 447-7206 [1] SEAL-O-RING  
8. 7D-1649 [2] WASHER-HARD (13.5X32X5-MM THK)  
9. 8D-0648 [2] BOLT-12 POINT HEAD (1/2-13X4.5-IN)  
10. 253-0857 C [1] VALVE AS-CHECK  
  9M-5590 [1] BALL  
  253-0859 [1] STOP-CHECK VALVE  
11. 102-4157 C [1] PLUG  
12. 3P-0647 C [1] SEAL-O-RING  
13. 5P-7815 C [1] SEAL-O-RING  
14. 7E-1630 C [1] GASKET  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37922122
 

218-3902: PRECHAMBER GP

218-3902 PRECHAMBER GP (CHG -00 THRU -05-05D1 THRU -07)
HIGH EFFICIENCY
i01797729 SEBP3792
2183902 PRECHAMBER GP Parts scheme
  For full view, you need register

Parts for your G3606B GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-1630 [1] GASKET  
2. 102-4157 [1] PLUG  
3. 125-3848 [1] PRECHAMBER AS  
4. 218-3905 [1] BODY AS  
4A. 4F-6024 [2] PIN  
5. 219-6908 [1] GASKET  
6. 219-7009 [1] GASKET  
7. 253-0857 [1] VALVE AS-CHECK  
7A. 9M-5590 [1] BALL  
7B. 253-0859 [1] STOP-CHECK VALVE  
7C. 253-0858 [1] BODY-CHECK VALVE  
8. 275-4011 [2] SPACER (15.5X29X62.5-MM THK)  
9. 3P-0647 [1] SEAL-O-RING  
10. 5P-4889 [1] SEAL-O-RING  
11. 5P-7815 [1] SEAL-O-RING  
12. 6J-2244 [1] SEAL-O-RING  
13. 6V-1179 [1] SEAL-O-RING  
14. 6V-4368 [1] SEAL-O-RING  
15. 7D-1649 [2] WASHER-HARD (13.5X32X5-MM THK)  
16. 8D-0648 [2] BOLT-12 POINT HEAD (1/2-13X4.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37922123
 

218-3907: PRECHAMBER GP

218-3907 PRECHAMBER GP (CHG -00 THRU -05, -05D1, -06, -06D1, 208-9649-01)
LANDFILL
i01797693 SEBP3792
2183907 PRECHAMBER GP Parts scheme
  For full view, you need register

Parts for your G3606B GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-1630 [1] GASKET  
2. 9S-9334 [1] PLUG (1-5/16-12-THD)  
3. 125-3848 [1] PRECHAMBER AS  
4. 173-7663 [1] BODY GP-PRECHAMBER  
4A. 7N-2043 [1] DOWEL  
4B. 4F-6024 [2] PIN  
5. 218-3908 [1] FLANGE  
6. 219-6908 [1] GASKET  
7. 219-7009 [1] GASKET  
8. 253-0857 [1] VALVE AS-CHECK  
8A. 9M-5590 [1] BALL  
8B. 253-0859 [1] STOP-CHECK VALVE  
8C. 253-0858 [1] BODY-CHECK VALVE  
9. 275-4011 [2] SPACER (15.5X29X62.5-MM THK)  
10. 3P-0647 [1] SEAL-O-RING  
11. 5P-0537 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 5P-4889 [1] SEAL-O-RING  
13. 6J-2244 [1] SEAL-O-RING  
14. 6V-1179 [1] SEAL-O-RING  
15. 6V-4368 [1] SEAL-O-RING  
16. 7B-8167 [4] BOLT (1/4-20X1.625-IN)  
17. 7D-1649 [2] WASHER-HARD (13.5X32X5-MM THK)  
18. 7M-8485 [1] SEAL-O-RING  
19. 8C-0624 [1] SEAL-O-RING  
20. 8D-0648 [2] BOLT-12 POINT HEAD (1/2-13X4.5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37922124
 

479-7703: PRECHAMBER GP

479-7703 PRECHAMBER GP (CHG -00, -01)
PART OF 218-3893 PRECHAMBER GP
i06268123 SEBP3792
4797703 PRECHAMBER GP Parts scheme
  For full view, you need register

Parts for your G3606B GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7E-1630 [1] GASKET  
2. [1] PLUG  
3. 546-6109 [1] VALVE AS-CHECK  
  9M-5590 [1] BALL  
  253-0859 [1] STOP-CHECK VALVE  
4. 546-6108 [1] PRECHAMBER AS  
5. 228-4947 [1] SEAL-O-RING  
6. 5P-7815 [1] SEAL-O-RING  
 

#SEBP37922125
 

116-6965: PUMP GP-GEAR

116-6965 PUMP GP-GEAR -1-SECTION (CHG -04, -05)
Type 2
i02574440 SEBP3792
1166965 PUMP GP-GEAR Parts scheme
  For full view, you need register

Parts for your G3606B GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 512-3011 [1] GEAR-PUMP (55-TEETH)  
2. 512-3012 [1] GEAR (42-TEETH)  
3. 290-9753 CJ [1] PUMP GP-GEAR  
4. 0L-1143 [6] BOLT (3/8-16X2.5-IN)  
5. 0S-1585 [2] BOLT (1/2-13X1.5-IN)  
6. 1B-7182 [1] BOLT (5/16-18X1.25-IN)  
7. 5D-5957 [1] SEAL-O-RING  
8. 6V-3964 [1] WASHER-HARD (8.8X25.5X5-MM THK)  
9. 8T-6764 [1] PLUG-PIPE (1/8-27-THD)  
   
    AVAILABLE REPAIR KIT(S):
  288-6618 J [1] KIT-PUMP  
    (INCLUDES BRACKET BUSHING, BUSHINGS, SUBASSEMBLY, BUSHINGS, DRIVER SHAFT, GASKETS, GEAR DRIVE KEY, GEAR RETAINING RINGS,SEAL RETAINING RING, & SEPERATION PLATE)
  288-4608 J [1] KIT-SEAL  
    (INCLUDES LIP SEAL, MECHANICAL SEAL, & O-RINGS)
  C   CHANGE FROM PREVIOUS TYPE
  J   KIT MARKED J SERVICES PART(S) MARKED J
 

#SEBP37922126
 

100-9979: ROCKER ARM GP

100-9979 ROCKER ARM GP (CHG -03 THRU -09)
LANDFILL
PART OF 104-4837 VALVE MECHANISM GP
i00068740 SEBP3792
1009979 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your G3606B GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-8409 [2] PLATE-THRUST  
2. 1W-8410 [1] SHAFT AS-ARM  
2A. 9F-2247 [2] PLUG-PIPE (1/8-27-THD)  
3. 1W-8444 [1] SUPPORT-SHAFT  
4. 2A-4429 [2] LOCK-RETAINER  
5. 6I-2313 [1] SEAL  
6. 7E-7202 [2] BUTTON  
7. 7N-1903 [1] SPRING-VALVE INNER  
8. 7N-1904 [1] SPRING-VALVE OUTER  
9. 7W-5720 [1] SHAFT  
10. 7W-5725 [1] ROCKER ARM AS  
  1W-0605 [1] PIN-HOUSING SIDE  
11. 061-9455 [1] SEAL-O-RING  
12. [1] SUPPORT AS  
12A. 100-4996 [1] GUIDE-VALVE  
13. 108-5603 [1] SCREW (3/8-24X1.67-IN)  
14. 115-2368 [1] VALVE-INLET  
15. 122-9578 C [1] ARM AS  
15A. 1W-0605 [1] PIN-HOUSING SIDE  
16. 129-4859 [2] ROCKER ARM AS  
    (EACH INCLUDES)
16A. 6I-0578 [1] BUSHING  
16B. 151-4918 [1] INSERT  
16C. 2D-6642 [1] BALL  
17. 197-6999 [1] ROTOCOIL AS  
18. 204-4385 [2] SCREW-ADJUSTMENT (3/4-16-THD)  
19. 209-0962 [1] WASHER (17.8X45X7.29-MM THK)  
20. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
21. 6V-5019 [2] NUT-JAM (3/4-16-THD)  
22. 7L-9061 [2] SEAL-O-RING  
23. 8J-4351 [1] SEAL-O-RING  
24. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
25. 9X-3978 [1] SEAL-O-RING  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37922127
 

7C-0419: ROCKER ARM GP

7C-0419 ROCKER ARM GP (CHG -14 THRU -22)
PART OF 486-6943, 7C-0417 VALVE MECHANISM GP
i00068522 SEBP3792
7C0419 ROCKER ARM GP Parts scheme
  For full view, you need register

Parts for your G3606B GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1W-8409 [2] PLATE-THRUST  
2. 1W-8410 [1] SHAFT AS-ARM  
2A. 9F-2247 [2] PLUG-PIPE (1/8-27-THD)  
3. 1W-8444 [1] SUPPORT-SHAFT  
4. 2A-4429 [2] LOCK-RETAINER  
5. 3S-2713 [1] NUT-FULL (3/8-24-THD)  
6. 6I-2313 [1] SEAL  
7. 7C-2359 [1] SUPPORT AS  
7A. 100-4996 [1] GUIDE-VALVE  
8. 7E-7074 [1] RETAINER  
9. 7E-7202 [2] BUTTON  
10. 7N-1903 [1] SPRING-VALVE INNER  
11. 7N-1904 [1] SPRING-VALVE OUTER  
12. 7W-5718 [1] SEAL  
13. 7W-5720 [1] SHAFT  
14. 7W-5725 [1] ROCKER ARM AS  
14A. 1W-0605 [1] PIN-HOUSING SIDE  
15. 061-9455 [1] SEAL-O-RING  
16. 108-5603 [1] SCREW (3/8-24X1.67-IN)  
17. 115-2367 [1] VALVE-EXHAUST  
18. 122-9578 [1] ARM AS  
18A. 1W-0605 [1] PIN-HOUSING SIDE  
19. 129-4859 [2] ROCKER ARM AS  
    (EACH INCLUDES)
19A. 6I-0578 [1] BUSHING  
19B. 151-4918 [1] INSERT  
19C. 2D-6642 [1] BALL  
20. 197-6999 [1] ROTOCOIL AS  
21. 204-4385 [2] SCREW-ADJUSTMENT (3/4-16-THD)  
22. 209-0962 [1] WASHER (17.8X45X7.29-MM THK)  
23. 0S-1617 [4] BOLT (5/16-18X0.75-IN)  
24. 6V-5019 [2] NUT-JAM (3/4-16-THD)  
25. 7L-9061 [2] SEAL-O-RING  
26. 8J-4351 [1] SEAL-O-RING  
27. 9X-3978 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP37922128
 

7W-9683: SEAL GP-CRANKSHAFT

7W-9683 SEAL GP-CRANKSHAFT (CHG -03 THRU -08)
STANDARD ENGINE ROTATION
i00767462 SEBP3792
7W9683 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your G3606B GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1588 [18] BOLT (3/8-16X1.25-IN)  
2. 1D-4601 [8] BOLT (5/8-11X8.5-IN)  
3. 1W-2823 C [1] SLEEVE  
4. 1W-2824 C [1] RING-LOCK  
5. 3V-3308 [18] WASHER-HARD (10.2X20.5X2.5-MM THK)  
6. 6V-5059 [2] SEAL-O-RING  
7. 190-2462 [1] SEAL AS  
    (IN FRONT HOUSING ON STANDARD ROTATION ENGINE & IN REAR HOUSING ON REVERSE ROTATION ENGINE)
8. 190-2463 [1] SEAL AS  
    (IN REAR HOUSING ON STANDARD ROTATION ENGINE & IN FRONT HOUSING ON REVERSE ROTATION ENGINE)
9. 102-4112 C [1] ADAPTER-CRANKSHAFT  
10. 106-2033 [1] ADAPTER-CRANKSHAFT  
11. 160-8173 [2] SLEEVE-WEAR  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP37922129
 

4P-5235: SHAFT-STUB

4P-5235 SHAFT-STUB (CHG -01 THRU -05)
i00068432 SEBP3792
4P5235 SHAFT-STUB Parts scheme
  For full view, you need register

Parts for your G3606B GAS ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (NO SERVICED PARTS)
 

Information:

Engine News
New Valve Recession Tool Kit Available {0600,1105,1121}
1998/11/01
Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1999/01/01
A New Check Valve Assembly is Used in the Prechamber Groups {1106}
2002/08/01
New Cylinder Head Groups and New Prechamber Groups With 1/2-13 Standard Bolts Are Available {1100}
2003/03/01
A New Spark Plug Is Available For Use In Applications That Use Bio-Gas Fuel {1555}
2003/02/01
Guidelines for Modifying the Cylinder Head and the Prechamber Assembly for 1/2 Inch Bolts {1101}
2003/06/01
New Tooling Loosens Multiple Studs or Tooling Tightens Multiple Studs for the Cylinder Head or for the Main Bearing Cap {0701, 0703, 0705}
2004/05/17
Improved Spacer for the Prechamber Group {1106}
2005/07/04
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
Correction to Disassembly and Assembly, "Cylinder Head - Remove" and "Cylinder Head - Install" {1100, 1100}
2005/11/07
207-5034 Stud Tensioner Tool Gp and 191-5320 Stud Tensioner Tool Gp Require Different Hydraulic Pressures {0701, 0703, 0705, 1100, 1200}
2006/06/05
The Stud Tensioner Tool Groups for 3600, C280, and G3600 Engines Require Different Hydraulic Pressures {0703, 0705, 1100, 1202, 1203}
2011/11/21
A New Exhaust Valve is Used {1100, 1105}
2008/04/14
Guidelines for Reusability of Cylinder Head Studs, Main Bearing Cap Studs, Main Bearing Cap Cross Tie Bolts, and Connecting Rod Cap Bolts and Nuts {1100, 1218, 1230}
2009/06/01
A New Prechamber and Gasket Are Available for Certain G3600 Engines {1106}
2013/06/03
Cat<SUP>&reg;</SUP> Reman Now Offers New Prechamber Kits for Certain G3600 Engines {1106}
2014/09/26
A New Valve Bridge and Seal Are Used on Certain G3600 Engines {1100, 1121}
A New Valve Bridge and Seal Are Used on Certain G3600 Engines {1100, 1121}
Operation and Maintenance Manual
Valve Stem Projection - Measure/Record
G3600 Engines
Gas Admission Valve Seals - Inspect/Replace
G3600 Engines
Gas Admission Valve - Recondition
G3600 Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING PLUGGED CROSS DRILL FUEL PASSAGES IN HEADS ON CERTAIN G3606, G3606B, G3608B, G3612, G3612B, AND G3616B ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING PLUGGED CROSS DRILL FUEL PASSAGES IN HEADS ON CERTAIN G3606, G3606B, G3608B, G3612, G3612B, AND G3616B ENGINES
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING PLUGGED CROSS DRILL FUEL PASSAGES IN HEADS ON CERTAIN G3606, G3606B, G3608B, G3612, G3612B, AND G3616B ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING PLUGGED CROSS DRILL FUEL PASSAGES IN HEADS ON CERTAIN G3606, G3606B, G3608B, G3612, G3612B, AND G3616B ENGINES
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING PLUGGED CROSS DRILL FUEL PASSAGES IN HEADS ON CERTAIN G3606, G3606B, G3608B, G3612, G3612B, AND G3616B ENGINES
PRODUCT SUPPORT PROGRAM FOR REWORKING PLUGGED CROSS DRILL FUEL PASSAGES IN HEADS ON CERTAIN G3606, G3606B, G3608B, G3612, G3612B, AND G3616B ENGINES
Specifications
Cylinder Head, Valves, Valve Springs and Valve Seat Inserts
G3600 Engines
Tool Operating Manual
126-6918 Lifting Bracket Assembly{0599, 0629, 0632, 0701, 1100}
126-6918 Lifting Bracket Assembly{0599, 0629, 0632, 0701, 1100}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
4C2980 Valve Projection Group (3600){0374, 0599, 0701, 0703}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Reuse Specifications for 3600 Combustion Gaskets {0762, 0763, 1100, 1124, 1201}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CAT REMAN ANNOUNCES PRECHAMBER KIT FOR GAS 3600 APPLICATIONS
CAT REMAN ANNOUNCES PRECHAMBER KIT FOR GAS 3600 APPLICATIONS
CAT REMAN ANNOUNCES THE RELEASE OF A FUEL CHECK VALVE FOR GAS 3600 APPLICATIONS
CAT REMAN ANNOUNCES THE RELEASE OF A FUEL CHECK VALVE FOR GAS 3600 APPLICATIONS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SPACER IN THE PRECHAMBER COUNTERBORE ON CERTAIN G3608, G3612, AND G3616 ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND POSSIBLY REWORKING CERTAIN REMAN CYLINDER HEADS ON CERTAIN 3600/C280 GAS AND DIESEL ENGINES
Disassembly and Assembly
Gas Admission Valve - Remove
G3606 and G3608 Engines
Gas Admission Valve - Disassemble
G3606 and G3608 Engines
Gas Admission Valve - Assemble
G3606 and G3608 Engines
Prechamber Ignition Body - Remove
G3606 and G3608 Engines
Cylinder Head - Disassemble
G3606 and G3608 Engines
Cylinder Head - Assemble
G3606 and G3608 Engines
Prechamber Check Valve - Remove and Install
G3606 and G3608 Engines
Gas Admission Valve - Install
G3606 and G3608 Engines
Prechamber Ignition Body - Install
G3606 and G3608 Engines
Cylinder Head - Remove
G3606 and G3608 Engines
Cylinder Head - Install
G3606 and G3608 Engines
Service Magazine
Use 9U-5156 Tool Group (Part Of 9U-5107 Group) To Clean Prechamber Seats{1106,0680}
1998/03/23
Use 143-8995 Leak Down Check Tool And 143-8997 Check (Dummy) Valve For Testing Check Valves{1106,0701}
1998/03/23
Use 151-8689 Seal Template Tool For Cylinder Head Combustion Surface {1101}
1998/08/17
Use 130-1449 Puller Group To Remove Valve Seat Inserts {1063}
1998/11/23

Caterpillar Parts SIS Catalog G3606B :

PRECHAMBER GP
218-3893 PRECHAMBER GP
PRECHAMBER GP
117-4911 PRECHAMBER GP
PRECHAMBER GP
117-4911 PRECHAMBER GP
PRECHAMBER GP
110-5469 PRECHAMBER GP
287-7867 PLUG GP-ENGINE
PISTON AS
204-5289 PISTON AS
PISTON AS
204-5285 PISTON AS
PISTON AS
204-5283 PISTON AS
PRECHAMBER GP
218-3893 PRECHAMBER GP
PRECHAMBER GP
218-3902 PRECHAMBER GP
PRECHAMBER GP
218-3907 PRECHAMBER GP
PRECHAMBER GP
479-7703 PRECHAMBER GP
PUMP GP-GEAR
116-6965 PUMP GP-GEAR
ROCKER ARM GP
100-9979 ROCKER ARM GP
ROCKER ARM GP
7C-0419 ROCKER ARM GP
SEAL GP-CRANKSHAFT
7W-9683 SEAL GP-CRANKSHAFT

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.