ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GPELECTRONICS GP-ENGINE
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP#SEBP37931410
280-0546: LINES GP-AIR STARTING
280-0546 LINES GP-AIR STARTING -TURBINE (CHG -00 THRU -05)
Type 1
Type 1
Parts for your G3608 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4W-2245 | [2] | VALVE-SHUTOFF (LOCKING) | |
2. | 6F-7701 | [1] | TEE-PIPE | |
3. | 6V-8252 | [2] | UNION-PIPE | |
4. | 106-5620 | [5] | CLAMP-PIPE | |
5. | 140-9462 | [1] | BUSHING-REDUCER | |
6. | 146-5215 Y | [1] | STRAINER GP-AIR LINES | |
7. | 149-3995 | [1] | NIPPLE-PIPE | |
8. | 9Y-6582 | [1] | PIPE | |
9. | 3L-1258 | [1] | NIPPLE-PIPE | |
10. | 6L-5699 | [2] | NIPPLE-PIPE | |
11. | 1H-2815 | [1] | NIPPLE-PIPE | |
12. | 105-0428 | [3] | NIPPLE-PIPE | |
13. | 280-0471 | [1] | BRACKET AS | |
14. | 280-0473 | [4] | BRACKET | |
15. | 302-2199 | [1] | VALVE-RELAY (AIR START) | |
16. | 315-8399 | [1] | FITTING | |
17. | 317-6510 | [1] | FLANGE | |
18. | 319-6195 | [1] | ELBOW | |
19. | 0S-1571 | [4] | BOLT (3/8-16X1.75-IN) | |
20. | 0S-1591 | [4] | BOLT (3/8-16X1.5-IN) | |
21. | 5P-4115 | [10] | WASHER-HARD (7.2X19X2-MM THK) | |
22. | 9L-9132 | [8] | WASHER (10.2X25.5X2.5-MM THK) | |
23. | 5B-7660 | [1] | BUSHING-REDUCER | |
24. | 6F-8856 | [2] | ELBOW | |
25. | 3E-9865 | [10] | LOCKNUT (1/4-20-THD) | |
26. | 8F-6302 | [10] | BOLT (1/4-20X3.75-IN) | |
27. | 8T-6760 | [1] | PLUG-PIPE (1-1/2-11-1/2 NPT) | |
28. | 229-9325 | [1] | FITTING-PIPE | |
Y | SEPARATE ILLUSTRATION |
#SEBP37931411
280-0546: LINES GP-AIR STARTING
280-0546 LINES GP-AIR STARTING -TURBINE (CHG -06 THRU -08)
Type 2
Type 2
Parts for your G3608 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 4W-2245 | [2] | VALVE-SHUTOFF (LOCKING) | |
2. | 6F-7701 | [1] | TEE-PIPE | |
3. | 6V-8252 | [2] | UNION-PIPE | |
4. | 106-5620 | [5] | CLAMP-PIPE | |
5. | 140-9462 | [1] | BUSHING-REDUCER | |
6. | 146-5215 Y | [1] | STRAINER GP-AIR LINES | |
9. | 3L-1258 | [1] | NIPPLE-PIPE | |
11. | 1H-2815 C | [3] | NIPPLE-PIPE | |
12. | 105-0428 C | [2] | NIPPLE-PIPE | |
13. | 280-0471 | [1] | BRACKET AS | |
14. | 280-0473 | [4] | BRACKET | |
15. | 302-2199 | [1] | VALVE-RELAY (AIR START) | |
16. | 315-8399 | [1] | FITTING | |
17. | 317-6510 | [1] | FLANGE | |
18. | 319-6195 | [1] | ELBOW | |
19. | 0S-1571 | [4] | BOLT (3/8-16X1.75-IN) | |
20. | 0S-1591 | [4] | BOLT (3/8-16X1.5-IN) | |
21. | 5P-4115 | [10] | WASHER-HARD (7.2X19X2-MM THK) | |
22. | 9L-9132 | [8] | WASHER (10.2X25.5X2.5-MM THK) | |
23. | 3E-2315 C | [1] | ADAPTER-PIPE | |
24. | 6F-8856 | [2] | ELBOW | |
25. | 3E-9865 | [10] | LOCKNUT (1/4-20-THD) | |
26. | 8F-6302 | [8] | BOLT (1/4-20X3.75-IN) | |
27. | 8T-6760 | [1] | PLUG-PIPE (1-1/2-11-1/2 NPT) | |
28. | 229-9325 C | [2] | FITTING-PIPE | |
29. | 123-0214 C | [1] | NIPPLE-PIPE | |
30. | 3B-8695 | [2] | BOLT (1/4-20X3.5-IN) | |
C | CHANGE FROM PREVIOUS TYPE | |||
Y | SEPARATE ILLUSTRATION |
#SEBP37931412
280-0547: LINES GP-AIR STARTING
280-0547 LINES GP-AIR STARTING (CHG -00 THRU -04)
Type 1
Type 1
Parts for your G3608 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 7B-0192 | [1] | CONNECTOR | |
2. | 164-0717 Y | [1] | VALVE GP-SOLENOID | |
4. | 278-0619 I | [1] | HOSE AS | |
5. | 278-0622 I | [1] | HOSE AS | |
6. | 278-0626 I | [1] | HOSE AS | |
7. | 278-0629 I | [1] | HOSE AS | |
8. | 279-4495 | [1] | FITTING | |
9. | 291-4185 | [1] | BRACKET AS | |
10. | 001-6449 | [2] | CONNECTOR | |
11. | 003-2143 | [2] | ELBOW | |
12. | 030-7946 | [2] | ELBOW | |
13. | 030-7961 | [1] | ELBOW | |
14. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
15. | 3J-7354 | [2] | SEAL-O-RING | |
16. | 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
17. | 4F-7957 | [4] | BOLT (1/4-20X0.875-IN) | |
18. | 4S-6399 | [3] | CONNECTOR | |
19. | 5P-0537 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
20. | 5P-9297 | [3] | CLIP (LOOP) | |
21. | 6K-1972 | [1] | ELBOW-FLARED | |
22. | 7K-9197 | [1] | ELBOW | |
23. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
24. | 9S-8750 | [4] | NUT-FULL (1/4-20-THD) | |
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
Y | SEPARATE ILLUSTRATION |
#SEBP37931413
280-0547: LINES GP-AIR STARTING
280-0547 LINES GP-AIR STARTING (CHG -05, -06)
Type 2
Type 2
Parts for your G3608 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 2D-7325 | [1] | TEE-PIPE | |
2. | 164-0717 Y | [1] | VALVE GP-SOLENOID (AIR STARTING) | |
4. | 278-0619 I | [1] | HOSE AS | |
5. | 278-0622 I | [1] | HOSE AS | |
6. | 278-0626 I | [1] | HOSE AS | |
7. | 278-0629 I | [1] | HOSE AS | |
9. | 291-4185 | [1] | BRACKET AS | |
10. | 001-6449 | [2] | CONNECTOR | |
11. | 003-2143 | [2] | ELBOW | |
12. | 030-7946 | [2] | ELBOW | |
14. | 0S-1571 | [2] | BOLT (3/8-16X1.75-IN) | |
15. | 3J-7354 | [2] | SEAL-O-RING | |
16. | 3V-3308 | [2] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
17. | 4F-7957 | [4] | BOLT (1/4-20X0.875-IN) | |
18. | 4S-6399 | [3] | CONNECTOR | |
19. | 5P-0537 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
20. | 5P-9297 | [3] | CLIP (LOOP) | |
21. | 6K-1972 | [1] | ELBOW-FLARED | |
22. | 7K-9197 | [1] | ELBOW | |
23. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
24. | 9S-8750 | [4] | NUT-FULL (1/4-20-THD) | |
I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
Y | SEPARATE ILLUSTRATION |
#SEBP37931414
119-6282: LUBRICATOR GP-AIR MOTOR
119-6282 LUBRICATOR GP-AIR MOTOR (CHG -00)
PART OF 119-6284 LUBRICATOR GP-AIR MOTOR
FIELD REPLACEMENT ORDER @@@@@119-6284@@@@@
PART OF 119-6284 LUBRICATOR GP-AIR MOTOR
FIELD REPLACEMENT ORDER @@@@@119-6284@@@@@
#SEBP37931415
119-6283: LUBRICATOR GP-AIR MOTOR
119-6283 LUBRICATOR GP-AIR MOTOR (CHG -00)
PART OF 119-6284 LUBRICATOR GP-AIR MOTOR
FIELD REPLACEMENT ORDER @@@@@119-6284@@@@@
PART OF 119-6284 LUBRICATOR GP-AIR MOTOR
FIELD REPLACEMENT ORDER @@@@@119-6284@@@@@
Parts for your G3608 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
(NO SERVICED PARTS) |
#SEBP37931416
119-6284: LUBRICATOR GP-AIR MOTOR
119-6284 LUBRICATOR GP-AIR MOTOR (CHG -00 THRU -02)
PART OF 174-9447 LINES GP-AIR STARTING
FIELD REPLACEMENT FOR @@@@@119-6282@@@@@, @@@@@119-6283@@@@@
PART OF 174-9447 LINES GP-AIR STARTING
FIELD REPLACEMENT FOR @@@@@119-6282@@@@@, @@@@@119-6283@@@@@
Parts for your G3608 GAS ENGINE:
CATERPILLAR SIS#SEBP37931417
7W-0522: LUBRICATOR GP-AIR MOTOR
7W-0522 LUBRICATOR GP-AIR MOTOR (CHG -02 THRU -04)
PART OF 219-2856, 280-0548 LINES GP-AIR
PART OF 219-2856, 280-0548 LINES GP-AIR
Parts for your G3608 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
(NO SERVICED PARTS) |
#SEBP37931418
324-7880: MOUNTING GP-CONTROL
324-7880 MOUNTING GP-CONTROL (CHG -00, -01)
PART OF 219-9926 SENSOR GP-COMBUSTION
PART OF 219-9926 SENSOR GP-COMBUSTION
Parts for your G3608 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 324-7875 Y | [1] | BOX GP-CONTROL | |
2. | 324-7881 | [1] | BRACKET AS | |
1F-0750 | [5] | NUT-WELD (3/8-16-THD) | ||
9V-9116 | [2] | SPACER (11.11X19.05X165-MM THK) | ||
3. | 0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | |
4. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
5. | 3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | |
6. | 3V-3308 | [8] | WASHER-HARD (10.2X20.5X2.5-MM THK) | |
7. | 9X-6458 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
Y | SEPARATE ILLUSTRATION |
#SEBP37931419
538-9575: MOUNTING GP-CONTROL
538-9575 MOUNTING GP-CONTROL (CHG -00)
Parts for your G3608 GAS ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
324-7875 Y | [1] | BOX GP-CONTROL | ||
0L-2070 | [2] | BOLT (3/8-16X2.25-IN) | ||
0S-1594 | [4] | BOLT (3/8-16X1-IN) | ||
3B-1915 | [4] | BOLT (3/8-16X1.375-IN) | ||
324-7881 | [1] | BRACKET AS | ||
1F-0750 | [5] | NUT-WELD (3/8-16-THD) | ||
9V-9116 | [2] | SPACER (11.11X19.05X165-MM THK) | ||
3V-3308 | [8] | WASHER-HARD (10.2X20.5X2.5-MM THK) | ||
9X-6458 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | ||
Y | SEPARATE ILLUSTRATION |
Information:
ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
Engine News
Operation and Maintenance Manual
Special Instruction
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>®</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Specifications
Systems Operation
Testing and Adjusting
Troubleshooting
Disassembly and Assembly