ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP38094690
222-5970: WIRING GP-ENGINE
222-5970 WIRING GP-ENGINE
S/N SAP4018-99999; WAX1-UP
12 VOLT
FOR USE WITH @@@@@229-8853@@@@@, @@@@@229-8859@@@@@, EXTENDED MOUNT ECMS
CANNOT BE USED WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@
S/N SAP4018-99999; WAX1-UP
12 VOLT
FOR USE WITH @@@@@229-8853@@@@@, @@@@@229-8859@@@@@, EXTENDED MOUNT ECMS
CANNOT BE USED WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@
For full view, you need register
Parts for your C7 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 4P-5918 | [2] | CLIP | |
| 4. | 206-1345 | [10] | STRAP-CABLE | |
| 5. | 222-5917 | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
| 135-5975 | [1] | GROMMET-WIRING | ||
| 180-9340 | [12] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 266-7696 C | [1] | HARNESS AS-WIRING (ELECTRONIC CONTROL MODULE) | |
| 230-4013 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM) | |||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 305-5362 | [4] | TERMINAL AS (18-GA) | ||
| 180-9340 | [55] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 180-9339 | [12] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 8T-8737 | [40] | PLUG-SEAL | ||
| 116-6161 | [1] | CAP-CONNECTOR | ||
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 183-4403 | [1] | CLIP (LOOP) | |
| 9. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 10. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP38094691
222-5903: WIRING GP-ENGINE ELECTRONIC
222-5903 WIRING GP-ENGINE ELECTRONIC
S/N KAL1-81015
12 VOLT
FOR USE WITH @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
CANNOT BE USED WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, EXTENDED MOUNT ECMS
ALSO AN ATTACHMENT
S/N KAL1-81015
12 VOLT
FOR USE WITH @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
CANNOT BE USED WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, EXTENDED MOUNT ECMS
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C7 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [14] | STRAP-CABLE | |
| 2. | 4P-5918 | [2] | CLIP | |
| 3. | 105-1797 | [7] | MOUNT | |
| 4. | 206-1345 | [3] | STRAP-CABLE | |
| 5. | 222-5905 | [1] | HARNESS AS (ELECTRONIC CONTROL MODULE) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 8T-8737 | [41] | PLUG-SEAL | ||
| 6. | 222-5917 | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 103-8134 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 183-4403 | [1] | CLIP (LOOP) | |
| 9. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 10. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
#SEBP38094692
222-5903: WIRING GP-ENGINE ELECTRONIC
222-5903 WIRING GP-ENGINE ELECTRONIC
S/N SAP1-99999; WAX1-UP
12 VOLT
FOR USE WITH @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
CANNOT BE USED WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, EXTENDED MOUNT ECMS
S/N SAP1-99999; WAX1-UP
12 VOLT
FOR USE WITH @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
CANNOT BE USED WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, EXTENDED MOUNT ECMS
For full view, you need register
Parts for your C7 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [7] | STRAP-CABLE | |
| 2. | 4P-5918 | [2] | CLIP | |
| 4. | 206-1345 | [10] | STRAP-CABLE | |
| 5. | 266-7698 C | [1] | HARNESS AS-CONTROL (ELECTRONIC CONTROL MODULE) | |
| 230-4013 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM) | |||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 305-5362 | [4] | TERMINAL AS (18-GA) | ||
| 180-9340 | [55] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 180-9339 | [12] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 8T-8737 | [40] | PLUG-SEAL | ||
| 116-6161 | [1] | CAP-CONNECTOR | ||
| 6. | 222-5917 | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
| 135-5975 | [1] | GROMMET-WIRING | ||
| 180-9340 | [12] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 183-4403 | [1] | CLIP (LOOP) | |
| 9. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 10. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP38094693
222-5903: WIRING GP-ENGINE ELECTRONIC
222-5903 WIRING GP-ENGINE ELECTRONIC
S/N KAL39479-99999; SAP1-99999; WAX1-UP
12 VOLT
FOR USE WITH @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
CANNOT BE USED WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, EXTENDED MOUNT ECMS
ALSO AN ATTACHMENT
S/N KAL39479-99999; SAP1-99999; WAX1-UP
12 VOLT
FOR USE WITH @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
CANNOT BE USED WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, EXTENDED MOUNT ECMS
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C7 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [14] | STRAP-CABLE | |
| 2. | 4P-5918 | [2] | CLIP | |
| 3. | 105-1797 | [7] | MOUNT | |
| 4. | 206-1345 | [3] | STRAP-CABLE | |
| 5. | 261-3781 | [1] | HARNESS AS-WIRING (ELECTRONIC CONTROL MODULE) | |
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8T-8737 | [40] | PLUG-SEAL | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 6. | 222-5917 | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 103-8134 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 183-4403 | [1] | CLIP (LOOP) | |
| 9. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 10. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| M | METRIC PART | |||
#SEBP38094694
222-5969: WIRING GP-ENGINE ELECTRONIC
222-5969 WIRING GP-ENGINE ELECTRONIC
S/N KAL288-94799
FOR USE WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
ALSO AN ATTACHMENT
S/N KAL288-94799
FOR USE WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C7 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [15] | STRAP-CABLE | |
| 2. | 4P-5918 | [2] | CLIP | |
| 3. | 105-1797 | [7] | MOUNT | |
| 4. | 206-1345 | [3] | STRAP-CABLE | |
| 5. | 222-5906 | [1] | HARNESS AS (ECM) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 6. | 222-5917 | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 103-8134 | KIT-RECEPTACLE (12-PIN) | |||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 183-4403 | [1] | CLIP (LOOP) | |
| 9. | 4P-7581 | [1] | CLIP (LADDER) | |
| 10. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 11. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| 12. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 13. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
#SEBP38094695
222-5969: WIRING GP-ENGINE ELECTRONIC
222-5969 WIRING GP-ENGINE ELECTRONIC
S/N KAL94800-99999; SAP1-3958
FOR USE WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
ALSO AN ATTACHMENT
S/N KAL94800-99999; SAP1-3958
FOR USE WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C7 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [16] | STRAP-CABLE | |
| 2. | 4P-5918 | [2] | CLIP | |
| 3. | 105-1797 | [7] | MOUNT | |
| 4. | 206-1345 C | [4] | STRAP-CABLE | |
| 5. | 222-5917 | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 103-8134 | KIT-RECEPTACLE (12-PIN) | |||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 261-3782 C | [1] | HARNESS AS-WIRING (ECM) | |
| 102-8803 | [2] | KIT-RECEPTACLE (3-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 111-1567 | [4] | SOCKET-TERMINAL | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 123-1198 | [2] | SOCKET-TERMINAL | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM) | |||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 180-9340 | [51] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| (EACH INCLUDES) | ||||
| 194-5226 | [1] | WIRE AS (16-GA) | ||
| -OR- | ||||
| 194-5227 | [1] | WIRE AS (14-GA) | ||
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 183-4403 | [1] | CLIP (LOOP) | |
| 9. | 4P-7581 | [1] | CLIP (LADDER) | |
| 10. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 11. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| 12. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 13. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP38094696
222-5969: WIRING GP-ENGINE ELECTRONIC
222-5969 WIRING GP-ENGINE ELECTRONIC
S/N SAP3929-99999; WAX1-33007
FOR USE WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
ALSO AN ATTACHMENT
S/N SAP3929-99999; WAX1-33007
FOR USE WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C7 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [16] | STRAP-CABLE | |
| 2. | 4P-5918 | [2] | CLIP | |
| 3. | 105-1797 | [7] | MOUNT | |
| 4. | 206-1345 | [4] | STRAP-CABLE | |
| 5. | 222-5917 | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 103-8134 | KIT-RECEPTACLE (12-PIN) | |||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 266-7699 C | [1] | HARNESS AS-WIRING (ELECTRONIC CONTROL MODULE) | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 100-6674 | [2] | SEAL-CONNECTOR | ||
| 111-1567 | [4] | SOCKET-TERMINAL | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM) | |||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 180-9339 | [12] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| (EACH INCLUDES) | ||||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| (FOR USE WITH 16-18 GAUGE WIRE) | ||||
| -OR- | ||||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| (FOR USE WITH 14 GAUGE WIRE) | ||||
| 180-9340 | [57] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| (EACH INCLUDES) | ||||
| 194-5226 | [1] | WIRE AS (16-GA) | ||
| (FOR USE WITH 16-18 GAUGE WIRE) | ||||
| -OR- | ||||
| 194-5227 | [1] | WIRE AS (14-GA) | ||
| (FOR USE WITH 14 GAUGE WIRE) | ||||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| 230-4013 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| 155-2270 | [5] | KIT-CONNECTING PLUG (2-PIN) | ||
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 183-4403 | [1] | CLIP (LOOP) | |
| 9. | 4P-7581 | [1] | CLIP (LADDER) | |
| 10. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 11. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| 12. | 6V-5217 M | [1] | BOLT (M8X1.25X20-MM) | |
| 13. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP38094697
222-5969: WIRING GP-ENGINE ELECTRONIC
222-5969 WIRING GP-ENGINE ELECTRONIC
S/N WAX33008-UP
FOR USE WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
ALSO AN ATTACHMENT
S/N WAX33008-UP
FOR USE WITH @@@@@226-8695@@@@@, @@@@@227-5936@@@@@, @@@@@229-8853@@@@@, @@@@@229-8859@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C7 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [8] | STRAP-CABLE | |
| 2. | 4P-5918 | [2] | CLIP | |
| 4. | 206-1345 C | [10] | STRAP-CABLE | |
| 5. | 222-5917 | [1] | HARNESS AS-ENGINE (FUEL INJECTION) | |
| 180-9340 | [12] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 6N-7523 | [1] | WASHER (6.48X11.9X1.57-MM THK) | ||
| 135-5975 | [1] | GROMMET-WIRING | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| (INCLUDES PLUG AS & WEDGE) | ||||
| 6. | 283-5607 C | [1] | HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE) | |
| 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [2] | STRAP-CABLE | ||
| 8T-8737 | [37] | PLUG-SEAL | ||
| 100-3320 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 305-5362 | [4] | TERMINAL AS (18-GA) | ||
| 111-2416 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 126-5011 | [1] | SEAL-CONNECTOR | ||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(45-CM) | |||
| 126-1774 | [1] | COVER-CONNECTOR | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 160-7690 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 159-9322 | [1] | SEAL-O-RING | ||
| 180-9339 | [12] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 180-9340 | [56] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| 230-4011 | [2] | PLUG AS-CONNECTOR (2-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4013 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 237-0227 | [3] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 7. | 132-5789 | [1] | CLIP (LADDER) | |
| 8. | 183-4403 | [1] | CLIP (LOOP) | |
| 10. | 5P-4116 | [1] | WASHER-HARD (8.8X20.5X2-MM THK) | |
| 11. | 6V-2317 M | [1] | BOLT (M8X1.25X30-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP38094698
229-8853: WIRING GP-HEATER
229-8853 WIRING GP-HEATER
S/N KAL248-99999; SAP1-99999; WAX1-UP
12 VOLT
FOR USE WITH FRONT MOUNT FUEL FILTER AND INTEGRAL HEATER
CANNOT BE USED WITH @@@@@145-4925@@@@@
ALSO AN ATTACHMENT
S/N KAL248-99999; SAP1-99999; WAX1-UP
12 VOLT
FOR USE WITH FRONT MOUNT FUEL FILTER AND INTEGRAL HEATER
CANNOT BE USED WITH @@@@@145-4925@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C7 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 209-5581 Y | [1] | SWITCH GP-MAGNETIC (12-VOLT)(AIR INLET HEATER) | |
| 2. | 229-8851 | [1] | CABLE AS | |
| 2A. | 030-1712 | [1] | TERMINAL-RING (2-GA, 1/4-IN SCREW) | |
| 2B. | 135-2543 | [1] | BOOT (RED)(RED) | |
| 2C. | 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(3-CM) | ||
| 3. | 283-1224 | [1] | BRACKET AS | |
| 4. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 5. | 3S-2093 | [1] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38094699
229-8859: WIRING GP-HEATER
229-8859 WIRING GP-HEATER
S/N KAL247-99999; SAP1-99999; WAX1-UP
12-VOLT
FOR USE WITH MID OR REMOTE MOUNTED FUEL FILTER
CANNOT BE USED WITH @@@@@145-4925@@@@@, @@@@@180-9505@@@@@
ALSO AN ATTACHMENT
S/N KAL247-99999; SAP1-99999; WAX1-UP
12-VOLT
FOR USE WITH MID OR REMOTE MOUNTED FUEL FILTER
CANNOT BE USED WITH @@@@@145-4925@@@@@, @@@@@180-9505@@@@@
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C7 TRUCK ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 209-5581 Y | [1] | SWITCH GP-MAGNETIC (12-VOLT)(AIR INLET HEATER) | |
| 2. | 229-8854 | [1] | CABLE AS | |
| 2A. | 6V-9023 E | TUBE-HEAT SHRINK (12.7-MM DIA)(3-CM EACH) | ||
| 3. | 283-1225 | [1] | BRACKET AS | |
| 4. | 208-9277 M | [2] | BOLT-FLANGE HEAD (M6X1X20-MM) | |
| 5. | 5P-7970 M | [2] | NUT (M8X1.25-THD) | |
| 6. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 7. | 3S-2093 | [1] | STRAP-CABLE | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
ELECTRICAL AND STARTING SYSTEM
WIRING GP
Truck Engine News
Operation and Maintenance Manual
Special Instruction
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}
Installation Procedure for 366-9748 Injector Wiring Harness Kit {1254, 1290, 1408}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Technical Information Bulletin
Engine Control System and Charging System Failures
Engine Control System and Charging System Failures
Engine Control System and Charging System Failures
Specifications
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Troubleshooting
PTO Switch ON Lamp Circuit - Test
On-Highway Engines Electronic PTO Installation and Application Guide
On-Highway Engines Electronic PTO Installation and Application Guide
0231-12 J1939 Device Not Responding
On-Highway Engines Electronic PTO Installation and Application Guide
On-Highway Engines Electronic PTO Installation and Application Guide
