AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

432-5471 CYLINDER HEAD GP S/N JRE14304-UP; MCW1-UP PART OF 359-2104, 359-2119 ENGINE AR-CORE ALSO AN ATTACHMENT C15


BASIC ENGINE
CYLINDER HEAD GP
DAMPER GP
PAN GP-OIL

INDUSTRIAL ENGINE C15 INDUSTRIAL ENGINE JRE
 C15 Industrial Engine JRE00001-UP SEBP3815 C15 JRE   (2004)

BASIC ENGINE

CYLINDER HEAD GP
CYLINDER HEAD GP
314-7316 CYLINDER HEAD GP
CYLINDER HEAD GP
432-5470 CYLINDER HEAD GP
CYLINDER HEAD GP
432-5471 CYLINDER HEAD GP
PLUG GP-CYLINDER HEAD
234-5986 PLUG GP-CYLINDER HEAD
PLUG GP-CYLINDER HEAD
234-9184 PLUG GP-CYLINDER HEAD
PLUG GP-CYLINDER HEAD
353-5776 PLUG GP-CYLINDER HEAD
 

#SEBP38150210
 

432-5471: CYLINDER HEAD GP

432-5471 CYLINDER HEAD GP
S/N JRE14304-UP; MCW1-UP
PART OF 359-2104, 359-2119 ENGINE AR-CORE
ALSO AN ATTACHMENT
i05293475 SEBP3815
4325471 CYLINDER HEAD GP Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6772 [24] SEAL (WATER)  
2. 6I-4025 [16] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1855 [1] BOLT-12 POINT HEAD (3/4-16X7.638-IN)  
3. 106-5673 [10] FASTENER GP-CYLINDER HEAD  
    (EACH INCLUDES)
  5H-1504 [1] WASHER-HARD (20X33.5X5-MM THK)  
  124-1854 [1] BOLT-12 POINT HEAD (3/4-16X8.5-IN)  
4. 194-8124 [6] SLEEVE AS (EXHAUST PORT)  
5. 224-5122 [1] GASKET (CYLINDER HEAD)  
6. 432-5470 Y [1] CYLINDER HEAD GP  
7. 183-3407 [3] PLUG AS  
    (EACH INCLUDES)
  9S-8004 [1] PLUG (9/16-18-THD)  
  214-7568 [1] SEAL-O-RING  
8. 5P-0840 [1] SEAL-O-RING  
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP38150211
 

237-4286: DAMPER & PULLEY GP

237-4286 DAMPER & PULLEY GP
ALSO AN ATTACHMENT
i02116750 SEBP3815
2374286 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6N-7378 [1] PULLEY-CRANKSHAFT (4-GROOVE)  
2. 6N-7654 [1] SPACER (6.312X8.18X0.312-IN THK)  
3. 167-8130 [1] DAMPER AS  
4. 237-4288 [1] ADAPTER  
5. 4K-5175 [12] BOLT-12 POINT HEAD (1/2-13X1.5-IN)  
6. 8S-4753 [6] BOLT (5/8-18X8-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP38150212
 

345-8397: DAMPER & PULLEY GP

345-8397 DAMPER & PULLEY GP
PROVIDES A SINGLE VISCOUS DAMPER, ADAPTER, 8 RIB POLY-VEE CRANKSHAFT PULLEY AND MOUNTING HARDWARE
ALSO AN ATTACHMENT
i04150819 SEBP3815
3458397 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8130 [1] DAMPER AS  
2. 232-6560 [1] ADAPTER  
3. 345-8401 [1] PULLEY (8-GROOVE)  
4. 1B-7538 [6] BOLT (5/8-18X5.75-IN)  
5. 3H-7654 [12] WASHER-HARD (13.5X22.5X3-MM THK)  
6. 4K-5175 [12] BOLT-12 POINT HEAD (1/2-13X1.5-IN)  
7. 5P-8247 [6] WASHER-HARD (17X32X3.5-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP38150213
 

354-2424: DAMPER & PULLEY GP

354-2424 DAMPER & PULLEY GP
PROVIDES A SINGLE VISCOUS DAMPER, ADAPTER, 8 RIB POLY-VEE CRANKSHAFT PULLEY. 3 GROOVE CRANKSHAFT PULLEY FOR 11/16-IN BELTS AND MOUNTING HARDWARE
AN ATTACHMENT
i04401602 SEBP3815
3542424 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 213-3199 [1] DAMPER AS  
2. 232-6560 [1] ADAPTER  
3. 345-8401 [1] PULLEY (8-GROOVE)  
4. 345-8402 [1] PULLEY (3-GROOVE)  
5. [6] BOLT (5/8-18X9-IN)  
6. 4K-5175 [12] BOLT-12 POINT HEAD (1/2-13X1.5-IN)  
 

#SEBP38150214
 

4P-5532: DAMPER & PULLEY GP

4P-5532 DAMPER & PULLEY GP
VISCOUS, 1 GROOVE PULLEY
ALSO AN ATTACHMENT
i00384181 SEBP3815
4P5532 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-1047 [1] PULLEY (1-GROOVE)  
2. 167-8126 [1] DAMPER AS  
3. 177-9024 [1] ADAPTER-DAMPER  
4. 6F-7024 [6] BOLT (5/8-18X5-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP38150215
 

4P-5894: DAMPER & PULLEY GP

4P-5894 DAMPER & PULLEY GP
4-GROOVE PULLEY
PART OF 480-4450, 481-4668 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i00384511 SEBP3815
4P5894 DAMPER & PULLEY GP Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 177-9024 [1] ADAPTER-DAMPER  
2. 167-8126 [1] DAMPER AS  
3. 6N-7378 [1] PULLEY-CRANKSHAFT (4-GROOVE)  
4. 8S-4753 [6] BOLT (5/8-18X8-IN)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP38150216
 

111-8317: DAMPER GP

111-8317 DAMPER GP
S/N JRE1-UP
2-GROOVE. VISCOUS
FOR USE WITH ENGINES RATED 435 BHP AND ABOVE AND ENGINES EQUIPPED WITH AUTO TRANSMISSION OR FRONT PTO, AUTOMATIC TRANSMISSIONS OR FRONT PTO
AN ATTACHMENT
i00484161 SEBP3815
1118317 DAMPER GP Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8126 [1] DAMPER AS  
2. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP38150217
 

329-0361: DAMPER GP

329-0361 DAMPER GP
AN ATTACHMENT
i03025422 SEBP3815
3290361 DAMPER GP Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 213-3199 [1] DAMPER AS  
2. 232-6560 [1] ADAPTER  
3. 1B-7538 [6] BOLT (5/8-18X5.75-IN)  
4. 3H-7654 [12] WASHER-HARD (13.5X22.5X3-MM THK)  
5. 5P-8247 [6] WASHER-HARD (17X32X3.5-MM THK)  
6. 8M-2530 [12] BOLT-12 POINT HEAD (1/2-13X1.25-IN)  
 

#SEBP38150218
 

4P-5893: DAMPER GP

4P-5893 DAMPER GP
CANNOT BE USED WITH @@@@@ 4P-5894@@@@@
AN ATTACHMENT
i00122098 SEBP3815
4P5893 DAMPER GP Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 167-8126 [1] DAMPER AS  
2. 1A-3203 [6] BOLT (5/8-18X4.75-IN)  
3. 4N-2109 [1] ADAPTER-DAMPER  
4. 168-2100 [1] SPACER (131.57X163.6X8-MM THK)  
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP38150219
 

163-1383: DRAIN GP-ENGINE OIL

163-1383 DRAIN GP-ENGINE OIL
S/N JRE13680-UP; MCW1-UP
ENVIRONMENTAL DRAIN
FOR USE WITH OIL PAN
ALSO AN ATTACHMENT
i01239682 SEBP3815
1631383 DRAIN GP-ENGINE OIL Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-7427 [1] ADAPTER  
2. 7E-4761 [1] VALVE-DRAIN (ENGINE OIL)  
3. 238-5080 [1] SEAL-O-RING  
4. 061-9458 [1] SEAL-O-RING  
 

Information:

Engine News
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Outer Valve Spring is Now Used {1100, 1108}
2008/11/17
Cylinder Head And Spacer Plate Gasket Failures On Certain Engines {1100, 1201}
2015/05/15
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
A Modified Procedure Is Now Used to Seal the Mating Surfaces of the Cylinder Block and the Gasket on C15 And C18 Engines {1100, 1124, 1201}
Operation and Maintenance Manual
Grounding Stud - Inspect/Clean/Tighten
C15 Industrial Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Oversized Injector Sleeves for Remanufactured Cylinder Heads On Medium Sized Engines{1100, 1101, 1125}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Rocker Valley Inserts Are Now Used in Remanufactured Cylinder Heads{1100, 1102}
Specifications
Cylinder Head Valves
C15 and C18 Industrial Engines
Cylinder Head
C15 and C18 Industrial Engines
Tool Operating Manual
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
370-8083 Plate Assembly - Lifting{0700, 0701, 0703, 1000, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
CATERPILLAR REMAN CYLINDER HEAD KITS FOR 3406E AND C-15 APPLICATIONS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C15 and C18 Industrial Engines
Disassembly and Assembly
Camshaft Bearings - Remove
C15 and C18 Industrial Engines
Camshaft Bearings - Install
C15 and C18 Industrial Engines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C15 and C18 Industrial Engines
Inlet and Exhaust Valve Guides - Remove and Install
C15 and C18 Industrial Engines
Inlet and Exhaust Valve Springs - Remove and Install
C15 and C18 Industrial Engines
Inlet and Exhaust Valves - Remove and Install
C15 and C18 Industrial Engines
Rocker Arm and Shaft - Remove
C15 and C18 Industrial Engines
Rocker Arm and Shaft - Install
C15 and C18 Industrial Engines
Electronic Unit Injector Sleeve - Remove
C15 and C18 Industrial Engines
Electronic Unit Injector Sleeve - Install
C15 and C18 Industrial Engines
Cylinder Head - Remove
C15 and C18 Industrial Engines
Cylinder Head - Install
C15 and C18 Industrial Engines

Caterpillar Parts SIS Catalog C15 :

CYLINDER HEAD GP
432-5470 CYLINDER HEAD GP
CYLINDER HEAD GP
314-7316 CYLINDER HEAD GP
CYLINDER HEAD GP
263-5055 CYLINDER HEAD GP
CYLINDER HEAD GP
234-9185 CYLINDER HEAD GP
CYLINDER HEAD GP
234-9185 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
CYLINDER HEAD GP
223-9250 CYLINDER HEAD GP
CYLINDER HEAD AS
281-1640 CYLINDER HEAD AS
DAMPER & PULLEY GP
237-4286 DAMPER & PULLEY GP
DAMPER & PULLEY GP
345-8397 DAMPER & PULLEY GP
DAMPER & PULLEY GP
354-2424 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-5532 DAMPER & PULLEY GP
DAMPER & PULLEY GP
4P-5894 DAMPER & PULLEY GP
DAMPER GP
111-8317 DAMPER GP
DAMPER GP
329-0361 DAMPER GP
DAMPER GP
4P-5893 DAMPER GP

Truck sale:

Caterpillar C15, Construction
96,000 USD 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C15, Construction
65,000 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C15, Construction
28,700 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C15, Construction
29,650 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C15, Construction
38,300 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.