AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GPLINES GP-AIR
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
#SEBP38150780
436-5757: KIT-TURBOCHARGER GASKET
436-5757 KIT-TURBOCHARGER GASKET
CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP
FOR USE WITH @@@@@365-6335@@@@@, @@@@@365-6337@@@@@
FIELD INSTALLATION
CONTAINS THE GASKETS & SEALS TO REINSTALL THE TURBO(S) & ATTACHING LINES. THE FOLLOWING TURBO MOUNTING HARDWARE WILL BE INCLUDED: BOLTS, NUTS, STUDS, WASHERS, SPACERS. APPLIES TO TURBO KIT PART NUMBERS 317-8751-UP
FOR USE WITH @@@@@365-6335@@@@@, @@@@@365-6337@@@@@
FIELD INSTALLATION
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4N-0699 | [1] | GASKET | ||
| 357-1752 | [1] | GASKET-TURBOCHARGER | ||
| 1S-6595 | [1] | GASKET-OIL SUPPLY | ||
| 375-2467 M | [4] | LOCKNUT-FLANGE (M10X1.5-THD) | ||
| 126-2702 | [1] | SEAL-INTEGRAL | ||
| 198-6068 | [1] | SEAL-INTEGRAL | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 8C-3089 | [1] | SEAL-O-RING | ||
| 114-2687 | [1] | SEAL-O-RING | ||
| 228-7091 | [1] | SEAL-O-RING | ||
| 357-0351 M | [4] | STUD-TAPERLOCK (M10X1.5X60-MM) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
#SEBP38150781
458-8201: KIT-TURBOCHARGER GASKET
458-8201 KIT-TURBOCHARGER GASKET
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOCHARGERS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE.
FIELD INSTALLATION
KIT CONTAINS GASKETS AND SEALS TO REINSTALL THE TURBOCHARGERS AND ATTACHING LINES. KIT INCLUDES TURBO MOUNTING HARDWARE.
FIELD INSTALLATION
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2N-2765 | [4] | BOLT-HIGH TEMPERATURE (3/8-16X1.75-IN) | ||
| 1S-4295 | [1] | GASKET (TURBOCHARGER) | ||
| 391-2167 | [4] | LOCKNUT-FLANGE (3/8X16-THD) | ||
| 126-2702 | [1] | SEAL-INTEGRAL | ||
| 198-6068 | [1] | SEAL-INTEGRAL | ||
| 114-2687 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP38150782
126-0076: LINES GP-AIR
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP38150783
126-0081: LINES GP-AIR
126-0081 LINES GP-AIR -TURBOCHARGER OUTLET
PART OF 480-4450, 481-4668 ENGINE AR-COMPLETE, 356-1455, 356-1457 LINES GP-AIR
ALSO AN ATTACHMENT
PART OF 480-4450, 481-4668 ENGINE AR-COMPLETE, 356-1455, 356-1457 LINES GP-AIR
ALSO AN ATTACHMENT
For full view, you need register
#SEBP38150784
161-1052: LINES GP-AIR
161-1052 LINES GP-AIR -TURBOCHARGER OUTLET
ALSO AN ATTACHMENT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP38150785
184-5367: LINES GP-AIR
184-5367 LINES GP-AIR -AFTERCOOLER
ALSO AN ATTACHMENT
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS#SEBP38150786
237-4297: LINES GP-AIR
237-4297 LINES GP-AIR
S/N JRE1-UP; MCW102-UP
FOR USE WITH FRONT EXHAUST TURBO RADIATOR PACKAGE
CANNOT BE USED WITH TWIN TURBO CONFIGURATION
ALSO AN ATTACHMENT
S/N JRE1-UP; MCW102-UP
FOR USE WITH FRONT EXHAUST TURBO RADIATOR PACKAGE
CANNOT BE USED WITH TWIN TURBO CONFIGURATION
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-8630 | [4] | HOSE-AIR INLET | |
| 2. | 9X-2201 | [16] | CLAMP-HOSE | |
| 3. | 109-4203 | [1] | ELBOW | |
| 4. | 126-0073 | [1] | ELBOW | |
| 5. | 127-0929 | [1] | CLAMP-V BAND | |
| 6. | 228-4381 | [1] | TUBE | |
| 7. | 228-7796 | [2] | BRACKET | |
| 8. | 467-1934 | [1] | TUBE | |
| 9. | 101-3125 | [1] | GASKET (AIR INLET MANIFOLD) | |
| 10. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
| 11. | 5P-2566 | [6] | BOLT (1/2-13X1.5-IN) | |
| 13. | 6V-6782 | [2] | CLIP (SLOT) | |
| 14. | 6V-6783 | [2] | CLIP (TAB) | |
| 15. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 17. | 8C-3089 | [1] | SEAL-O-RING | |
| 18. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 19. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 20. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 21. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 22. | 8T-7971 | [2] | WASHER-HARD (13.5X25.5X5-MM THK) |
#SEBP38150787
237-9754: LINES GP-AIR
237-9754 LINES GP-AIR -TURBOCHARGER OUTLET
ALSO AN ATTACHMENT
ALSO AN ATTACHMENT
For full view, you need register
#SEBP38150788
256-6171: LINES GP-AIR
256-6171 LINES GP-AIR
101.6-MM (4-INCH) DIAMETER TUBE
FOR USE WITH RADIATOR GROUP FORWARD FACING EXHAUST
CANNOT BE USED WITH TWIN TURBO CONFIGURATION
ALSO AN ATTACHMENT
101.6-MM (4-INCH) DIAMETER TUBE
FOR USE WITH RADIATOR GROUP FORWARD FACING EXHAUST
CANNOT BE USED WITH TWIN TURBO CONFIGURATION
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-8630 | [4] | HOSE-AIR INLET | |
| 2. | 9X-2201 | [16] | CLAMP-HOSE | |
| 3. | 109-4203 | [1] | ELBOW | |
| 4. | 126-0073 | [1] | ELBOW | |
| 5. | 127-0929 | [1] | CLAMP-V BAND | |
| 6. | 177-0035 M | [2] | U-BOLT (M10X1.5-THD) | |
| 7. | 228-4381 | [1] | TUBE | |
| 8. | 228-4386 | [1] | BRACKET AS | |
| 9. | 467-1934 | [1] | TUBE | |
| 10. | 101-3125 | [1] | GASKET (AIR INLET MANIFOLD) | |
| 11. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
| 12. | 6V-8188 | [4] | NUT (1/2-13-THD) | |
| 13. | 8C-3089 | [1] | SEAL-O-RING | |
| 14. | 8T-0389 M | [4] | LOCKNUT (M10X1.5-THD) | |
| 15. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4223 | [8] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 18. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 19. | 8T-8919 | [4] | BOLT (1/2-13X1.75-IN) | |
| 20. | 5S-7382 | [4] | BOLT (3/8-16X1.375-IN) | |
| M | METRIC PART | |||
#SEBP38150789
256-6172: LINES GP-AIR
256-6172 LINES GP-AIR
101.6-MM (4-INCH) DIAMETER TUBE
FOR USE WITH RADIATOR GROUP REAR FACING EXHAUST
AN ATTACHMENT
101.6-MM (4-INCH) DIAMETER TUBE
FOR USE WITH RADIATOR GROUP REAR FACING EXHAUST
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7E-8630 | [4] | HOSE-AIR INLET | |
| 2. | 109-4203 | [1] | ELBOW | |
| 3. | 126-0073 | [1] | ELBOW | |
| 4. | 127-0929 | [1] | CLAMP-V BAND | |
| 5. | 228-4381 | [1] | TUBE | |
| 6. | 228-7796 | [2] | BRACKET | |
| 7. | 256-6173 | [1] | TUBE | |
| 8. | 101-3125 | [1] | GASKET (AIR INLET MANIFOLD) | |
| 9. | 5M-6214 | [1] | PLUG (1/8-27 PTF) | |
| 10. | 5P-2566 | [6] | BOLT (1/2-13X1.5-IN) | |
| 11. | 6V-6782 | [2] | CLIP (SLOT) | |
| 12. | 6V-6783 | [2] | CLIP (TAB) | |
| 13. | 6V-8188 | [6] | NUT (1/2-13-THD) | |
| 14. | 8C-3089 | [1] | SEAL-O-RING | |
| 15. | 8T-4223 | [12] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 16. | 8T-4896 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 17. | 8T-6765 | [1] | PLUG-PIPE (1/4-18-THD) | |
| 18. | 8T-7971 | [2] | WASHER-HARD (13.5X25.5X5-MM THK) | |
| 19. | 9B-7237 | [4] | BOLT (3/8-16X1.25-IN) | |
| 20. | 9X-2201 | [16] | CLAMP-HOSE |
Information:
AIR INLET AND EXHAUST SYSTEM
TURBOCHARGER GP
Truck Engine News
Engine News
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {1000, 1052, 1087}
Operation and Maintenance Manual
Special Instruction
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Instructions for the Service Replacement of the Turbochargers{1052}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
Proper Remanufactured Turbocharger Housing Adjustment and Alignment for Caterpillar Engines {1052, 1053}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
A New Warranty Process for Variable Valve Actuator (VVA) Claims Is Now Used for Certain C11 Through C18 Engines {1052, 1130}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Reuse and Salvage for Turbochargers {0760, 0767, 1052}
Information Release Memo
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGERS
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
CAT REMAN ANNOUNCES AN ADVANCED SALVAGE TECHNIQUE WHICH WILL AFFECT THE APPEARANCE OF CERTAIN TURBOCHARGER TURBINE HOUSINGS.
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REMOVING THE PAINT FROM THE EXHAUST MANIFOLD AND/OR TURBO ON CERTAIN INDUSTRIAL ENGINES
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
