FUEL SYSTEM
PUMP GP-FUEL PRIMINGFILTER GP-FUEL
FUEL SYSTEM
PUMP GP-FUEL PRIMING
#SEBP38150970
490-0097: PUMP GP-FUEL PRIMING
490-0097 PUMP GP-FUEL PRIMING
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 260-5864 | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 112-4550 E | SLEEVE (21-CM) | |||
| 271-2180 | [1] | SWITCH AS-TOGGLE (ON, OFF) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 2. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 3. | 206-6876 | [1] | CAP-TUBE | |
| 4. | 209-8441 Y | [1] | HARNESS AS-PUMP (FUEL PRIMING) | |
| 5. | 232-1374 | [1] | BRACKET | |
| 6. | 232-1376 | [2] | SPACER (8.5X12.7X139.1-MM THK) | |
| 7. | 300-6714 | [8] | MOUNT | |
| 8. | 398-5601 | [1] | PLUG AS | |
| 238-5081 | [1] | SEAL-O-RING | ||
| 360-3681 | [1] | PLUG (7/8-14-THD) | ||
| 9. | 377-9626 | [1] | VALVE AS-DRAIN | |
| 141-8275 | [1] | VALVE-DRAIN (FUEL) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 10. | 442-0646 Y | [1] | PUMP GP-FUEL PRIMING | |
| 11. | 329-5459 | [1] | ADAPTER AS | |
| 5P-1404 | [1] | ADAPTER | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 12. | 3E-8005 M | [2] | BOLT (M8X1.25X160-MM) | |
| 13. | 5P-7970 M | [3] | NUT (M8X1.25-THD) | |
| 14. | 8T-0100 M | [1] | BOLT (M8X1.25X60-MM) | |
| 15. | 9N-0869 | [6] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 16. | 305-3684 | [1] | PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF) | |
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38150971
298-4782: PUMP GP-FUEL PRM & PRIM FILTER
298-4782 PUMP GP-FUEL PRM & PRIM FILTER
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 165-5970 Y | [1] | SWITCH GP-TOGGLE (FUEL PRIMING PUMP) | |
| 3. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 4. | 206-6876 | [1] | CAP-TUBE | |
| 5. | 209-8441 Y | [1] | HARNESS AS-PUMP (FUEL PRIMING) | |
| 6. | 213-4740 Y | [1] | PUMP GP-FUEL PRM & WATER SEP (ELECTRIC) | |
| 7. | 232-1374 | [1] | BRACKET | |
| 8. | 232-1376 | [2] | SPACER (8.5X12.7X139.1-MM THK) | |
| 9. | 141-8275 | [1] | VALVE-DRAIN (FUEL) | |
| 10. | 309-5131 | [1] | PLUG AS | |
| 9S-8006 | [1] | PLUG (7/8-14-THD) | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 11. | 329-5459 | [1] | ADAPTER AS | |
| 5P-1404 | [1] | ADAPTER | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 12. | 214-7568 | [1] | SEAL-O-RING | |
| 13. | 9N-0869 | [6] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 14. | 5C-7261 M | [3] | NUT (M8X1.25-THD) | |
| 15. | 8T-6869 M | [1] | BOLT (M8X1.25X60-MM) | |
| 16. | 8T-7352 M | [2] | BOLT (M8X1.25X160-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38150972
480-3674: PUMP GP-FUEL PRM & PRIM FILTER
480-3674 PUMP GP-FUEL PRM & PRIM FILTER
S/N MCW1-UP
PART OF 479-1282 LINES GP-FUEL FILTER
ALSO AN ATTACHMENT
S/N MCW1-UP
PART OF 479-1282 LINES GP-FUEL FILTER
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8T-9655 | [8] | MOUNT-ISOLATION | |
| 2. | 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | |
| 3. | 213-4740 Y | [1] | PUMP GP-FUEL PRM & WATER SEP | |
| 4. | 232-1374 | [1] | BRACKET | |
| 5. | 232-1376 | [2] | SPACER (8.5X12.7X139.1-MM THK) | |
| 6. | 260-5864 | [1] | SWITCH GP-TOGGLE (FUEL PUMP) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 7. | 305-3684 | [1] | PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38150973
499-2091: PUMP GP-FUEL PRM & PRIM FILTER
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 284-8381 Y | [1] | SWITCH AS-TOGGLE | ||
| 8T-6869 M | [1] | BOLT (M8X1.25X60-MM) | ||
| 8T-7352 M | [2] | BOLT (M8X1.25X160-MM) | ||
| 232-1374 | [1] | BRACKET | ||
| 300-6714 | [8] | MOUNT | ||
| 5C-7261 M | [3] | NUT (M8X1.25-THD) | ||
| 305-3684 | [1] | PLATE-IDENTIFICATION (FUEL PRIMING PUMP ON, OFF) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 360-3679 | [1] | PLUG-CONNECTOR (9/16-18-THD) | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 360-3681 | [1] | PLUG (7/8-14-THD) | ||
| [1] | PUMP GP-FUEL PRIMING | |||
| 361-5084 Y | [1] | PUMP GP-FUEL PRIMING (24-VOLT) | ||
| 423-8524 Y | [1] | FILTER GP-WATER SEP & FUEL | ||
| 191-1782 | [1] | SPACER (8.5X12.7X38.2-MM THK) | ||
| 232-1376 | [2] | SPACER (8.5X12.7X139.1-MM THK) | ||
| 7X-0579 | [6] | WASHER-HARD (8.8X25.5X2-MM THK) | ||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38150974
191-5054: PUMP GP-FUEL PRM & SEC FILTER
191-5054 PUMP GP-FUEL PRM & SEC FILTER
PROVIDES SECONDARY FUEL FILTER AND A UPRIGHT PRIMING PUMP
PART OF 436-3763 MOUNTING GP-FUEL FILTER, 257-7275, 359-0814, 511-9897, 524-9746 PUMP GP-FUEL PRM & SEC FILTER
FOR USE WITH HIGH OR LOW MOUNTED FUEL FILTER AND ADEM III CONTROL GP
ALSO AN ATTACHMENT
PROVIDES SECONDARY FUEL FILTER AND A UPRIGHT PRIMING PUMP
PART OF 436-3763 MOUNTING GP-FUEL FILTER, 257-7275, 359-0814, 511-9897, 524-9746 PUMP GP-FUEL PRM & SEC FILTER
FOR USE WITH HIGH OR LOW MOUNTED FUEL FILTER AND ADEM III CONTROL GP
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-0436 | [1] | GASKET (FUEL PRIMING PUMP) | |
| 2. | 137-5541 | [1] | PUMP GP-FUEL PRIMING | |
| 3. | 191-5055 Y | [1] | BASE GP-FUEL FILTER | |
| 4. | 1B-7182 | [1] | BOLT (5/16-18X1.25-IN) | |
| 5. | 1R-0749 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY) | |
| 6. | 5P-0537 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 7. | 7B-2742 | [1] | BOLT (1/4-20X1.25-IN) | |
| 8. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38150975
224-2165: PUMP GP-FUEL PRM & SEC FILTER
224-2165 PUMP GP-FUEL PRM & SEC FILTER
CANNOT BE USED WITH VERTICALLY UP OR REAR FACING AIR INLET ELBOW, LOWER LH MOUNTED AIR COMPRESSOR
ALSO AN ATTACHMENT
CANNOT BE USED WITH VERTICALLY UP OR REAR FACING AIR INLET ELBOW, LOWER LH MOUNTED AIR COMPRESSOR
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-0436 | [2] | GASKET (FUEL PRIMING PUMP) | |
| 2. | 1R-0749 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY) | |
| 3. | 137-5541 | [1] | PUMP GP-FUEL PRIMING | |
| 4. | 137-6283 | [1] | ADAPTER-PRIMING PUMP | |
| 5. | 191-5055 Y | [1] | BASE GP-FUEL FILTER | |
| 6. | 1B-7182 | [1] | BOLT (5/16-18X1.25-IN) | |
| 7. | 1D-4533 | [1] | BOLT (1/4-20X2.25-IN) | |
| 8. | 1D-4541 | [1] | BOLT (5/16-18X3-IN) | |
| 9. | 5P-0537 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 7B-2742 | [1] | BOLT (1/4-20X1.25-IN) | |
| 11. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38150976
257-7275: PUMP GP-FUEL PRM & SEC FILTER
257-7275 PUMP GP-FUEL PRM & SEC FILTER
S/N JRE1-828
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH INSTRUMENT PANEL GROUP, RADIATOR PACKAGE
AN ATTACHMENT
S/N JRE1-828
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH INSTRUMENT PANEL GROUP, RADIATOR PACKAGE
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 160-4372 | [1] | SUPPORT-BASE | |
| 2. | 203-7701 | [1] | BRACKET | |
| 3. | 137-5110 | [1] | BRACKET | |
| 4. | 5M-2894 | [14] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 6. | 191-5054 Y | [1] | PUMP GP-FUEL PRM & SEC FILTER | |
| 7. | 030-7947 | [5] | ADAPTER-ELBOW | |
| 8. | 033-6042 | [8] | SEAL-O-RING | |
| 9. | 4W-6841 I | [1] | HOSE AS | |
| 10. | 143-0453 Y | [1] | FILTER GP-FUEL | |
| 11. | 168-8974 | [1] | TUBE AS (FUEL SUPPLY) | |
| 12. | 2R-6806 | [2] | CONNECTOR | |
| 13. | 118-7809 | [3] | PLATE | |
| 14. | 067-2551 | [2] | CLIP | |
| 15. | 5B-9603 | [2] | BOLT (3/8-16X5-IN) | |
| 16. | 0T-0573 | [1] | BOLT (3/8-16X2.75-IN) | |
| 17. | 3B-1915 | [2] | BOLT (3/8-16X1.375-IN) | |
| 18. | 0S-0509 | [3] | BOLT (3/8-16X0.75-IN) | |
| 19. | 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | |
| 20. | 005-4362 | [1] | ELBOW | |
| 21. | 033-6028 | [2] | SEAL-O-RING | |
| 22. | 030-8188 | [1] | CONNECTOR | |
| 23. | 247-0486 I | [1] | HOSE AS | |
| 24. | 2P-7214 | [1] | ADAPTER-ELBOW | |
| 25. | 110-5957 I | [1] | HOSE AS | |
| 26. | 9N-5613 I | [1] | HOSE AS | |
| 27. | 166-5919 I | [1] | HOSE AS | |
| 28. | 4D-7735 | [3] | CLIP | |
| 29. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 30. | 3E-4352 | [2] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 31. | 5S-0003 | [1] | NUT (5/16-18-THD) | |
| 32. | 9X-0261 | [1] | ADAPTER | |
| 33. | 6V-5049 | [1] | SEAL-O-RING | |
| 34. | 239-2396 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 35. | 197-8391 Y | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
| 36. | 227-3812 | [1] | HARNESS AS-SENSOR | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS & WEDGE) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 37. | 3S-2093 | [1] | STRAP-CABLE | |
| 38. | 160-8124 | [1] | PLUG AS (2-PIN) | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38150977
257-7275: PUMP GP-FUEL PRM & SEC FILTER
257-7275 PUMP GP-FUEL PRM & SEC FILTER
S/N JRE829-UP; MCW1-UP
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH INSTRUMENT PANEL GROUP, RADIATOR PACKAGE
AN ATTACHMENT
S/N JRE829-UP; MCW1-UP
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH INSTRUMENT PANEL GROUP, RADIATOR PACKAGE
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 160-4372 | [1] | SUPPORT-BASE | |
| 2. | 203-7701 | [1] | BRACKET | |
| 3. | 137-5110 | [1] | BRACKET | |
| 4. | 5M-2894 | [14] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 6. | 191-5054 Y | [1] | PUMP GP-FUEL PRM & SEC FILTER | |
| 7. | 030-7947 | [5] | ADAPTER-ELBOW | |
| 8. | 033-6042 | [8] | SEAL-O-RING | |
| 9. | 4W-6841 I | [1] | HOSE AS | |
| 10. | 143-0453 Y | [1] | FILTER GP-FUEL | |
| 11. | 168-8974 | [1] | TUBE AS (FUEL SUPPLY) | |
| 12. | 2R-6806 | [2] | CONNECTOR | |
| 13. | 118-7809 | [3] | PLATE | |
| 14. | 067-2551 | [2] | CLIP | |
| 15. | 5B-9603 | [2] | BOLT (3/8-16X5-IN) | |
| 16. | 0T-0573 | [1] | BOLT (3/8-16X2.75-IN) | |
| 17. | 3B-1915 | [2] | BOLT (3/8-16X1.375-IN) | |
| 18. | 0S-0509 | [3] | BOLT (3/8-16X0.75-IN) | |
| 19. | 9S-8752 | [3] | NUT-FULL (3/8-16-THD) | |
| 20. | 005-4362 | [1] | ELBOW | |
| 21. | 033-6028 | [2] | SEAL-O-RING | |
| 22. | 030-8188 | [1] | CONNECTOR | |
| 23. | 247-0486 I | [1] | HOSE AS | |
| 24. | 2P-7214 | [1] | ADAPTER-ELBOW | |
| 25. | 110-5957 I | [1] | HOSE AS | |
| 26. | 9N-5613 I | [1] | HOSE AS | |
| 27. | 166-5919 I | [1] | HOSE AS | |
| 28. | 336-8613 | [3] | CLIP | |
| 29. | 0L-1351 | [1] | BOLT (3/8-16X0.875-IN) | |
| 30. | 3E-4352 | [2] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 31. | 5S-0003 | [1] | NUT (5/16-18-THD) | |
| 32. | 9X-0261 | [1] | ADAPTER | |
| 33. | 6V-5049 | [1] | SEAL-O-RING | |
| 34. | 239-2396 Y | [1] | SENSOR GP-PRESSURE (FUEL) | |
| 35. | 234-5013 CY | [1] | SENSOR GP-TEMPERATURE (FUEL) | |
| 36. | 276-3091 C | [1] | HARNESS AS-SENSOR (JUMPER) | |
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (60-CM) | |||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 37. | 3S-2093 | [1] | STRAP-CABLE | |
| 38. | 278-8844 C | [1] | PLUG AS-CONNECTOR | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 39. | 8C-5064 E | CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(74.9-CM) | ||
| 39A. | 8C-5064 E | CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(43.8-CM) | ||
| 39B. | 8C-5064 E | CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(36.8-CM) | ||
| 39C. | 8C-5064 E | CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(42-CM) | ||
| 39D. | 8C-5064 E | CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(80.4-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38150978
269-7631: PUMP GP-FUEL PRM & SEC FILTER
269-7631 PUMP GP-FUEL PRM & SEC FILTER
CANNOT BE USED WITH RADIATOR PACKAGE, LOW MOUNT FUEL FILTER, AND MID MOUNT FUEL FILTER
AN ATTACHMENT
CANNOT BE USED WITH RADIATOR PACKAGE, LOW MOUNT FUEL FILTER, AND MID MOUNT FUEL FILTER
AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1P-0436 | [2] | GASKET (FUEL PRIMING PUMP) | |
| 2. | 1W-5833 | [1] | ADAPTER-PRIMING | |
| 3. | 137-5541 | [1] | PUMP GP-FUEL PRIMING | |
| 4. | 191-5055 Y | [1] | BASE GP-FUEL FILTER | |
| 5. | 1B-7182 | [1] | BOLT (5/16-18X1.25-IN) | |
| 6. | 4F-7957 | [1] | BOLT (1/4-20X0.875-IN) | |
| 7. | 1R-0749 | [1] | FILTER-FUEL (ADVANCED EFFICIENCY)(SECONDARY) | |
| 8. | 0S-1618 | [1] | BOLT (5/16-18X1-IN) | |
| 9. | 5P-0537 | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 10. | 7B-2742 | [1] | BOLT (1/4-20X1.25-IN) | |
| 11. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38150979
359-0814: PUMP GP-FUEL PRM & SEC FILTER
359-0814 PUMP GP-FUEL PRM & SEC FILTER
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH INSTRUMENT PANEL GP
ALSO AN ATTACHMENT
FOR USE WITH FUEL COOLED ECM
CANNOT BE USED WITH INSTRUMENT PANEL GP
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C15 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [9] | STRAP-CABLE | |
| 2. | 4W-6841 I | [1] | HOSE AS | |
| 3. | 9N-5613 I | [1] | HOSE AS | |
| 4. | 101-6603 | [1] | CAP (STUD PROTECTOR) | |
| 5. | 110-5957 I | [1] | HOSE AS | |
| 6. | 118-7809 | [2] | PLATE | |
| 7. | 137-5110 | [1] | BRACKET | |
| 8. | 143-0453 Y | [1] | FILTER GP-FUEL | |
| 9. | 160-4372 | [1] | SUPPORT-BASE | |
| 10. | 166-5919 I | [1] | HOSE AS | |
| 11. | 168-8974 | [1] | TUBE AS (FUEL SUPPLY) | |
| 12. | 191-5054 Y | [1] | PUMP GP-FUEL PRM & SEC FILTER | |
| 13. | 203-7701 | [1] | BRACKET | |
| 14. | 234-5013 Y | [1] | SENSOR GP-TEMPERATURE | |
| 15. | 247-0486 I | [1] | HOSE AS | |
| 16. | 249-2943 | [1] | STUD (3/8-16-THD) | |
| 17. | 274-6719 | [1] | SENSOR GP-PRESSURE | |
| 18. | 278-8844 | [1] | PLUG AS-CONNECTOR | |
| 8T-8737 | [2] | PLUG-SEAL | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 19. | 313-9614 | [2] | ADAPTER AS | |
| (EACH INCLUDES) | ||||
| 2R-6806 | [1] | CONNECTOR | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 20. | 357-7335 | [1] | HARNESS AS-CONTROL | |
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9X-3402 | [5] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [5] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [9] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 230-4011 | [1] | PLUG AS-CONNECTOR (2-PIN) | ||
| 264-7029 | [1] | SEAL-CONNECTOR | ||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 237-0227 | [1] | PLUG AS-CONNECTOR (3-PIN) | ||
| 264-7030 | [1] | SEAL-CONNECTOR | ||
| 289-5150 E | SLEEVE (10-CM) | |||
| 21. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| 22. | 0T-0573 | [1] | BOLT (3/8-16X2.75-IN) | |
| 23. | 132-7551 | [1] | SPACER (11X19X6-MM THK) | |
| 24. | 191-7805 | [4] | ELBOW AS | |
| (EACH INCLUDES) | ||||
| 030-7947 | [1] | ADAPTER-ELBOW | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 25. | 1A-2029 | [2] | BOLT (3/8-16X1.125-IN) | |
| 26. | 321-8671 | [1] | CONNECTOR AS | |
| 030-8188 | [1] | CONNECTOR | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 27. | 329-5451 | [1] | ADAPTER AS | |
| 9X-0261 | [1] | ADAPTER | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 28. | 353-5102 | [1] | FITTING AS-ELBOW | |
| 005-4362 | [1] | ELBOW | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 29. | 353-5108 | [2] | ELBOW AS | |
| 2P-7214 | [1] | ADAPTER-ELBOW | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 30. | 3B-1915 | [2] | BOLT (3/8-16X1.375-IN) | |
| 31. | 3E-4352 | [2] | WASHER-HARD (8.8X20.5X2.5-MM THK) | |
| 32. | 5B-9603 | [2] | BOLT (3/8-16X5-IN) | |
| 33. | 5M-2894 | [15] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 34. | 5S-0003 | [1] | NUT (5/16-18-THD) | |
| 35. | 7V-6571 | [5] | GROMMET | |
| 36. | 124-0178 | [1] | PLATE | |
| 37. | 8T-1889 | [5] | CLIP (SLOT) | |
| 38. | 8T-1890 | [5] | CLIP (TAB) | |
| 39. | 9S-8752 | [4] | NUT-FULL (3/8-16-THD) | |
| 40. | 8C-5064 E | CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(24-CM) | ||
| 40A. | 8C-5064 E | CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(28-CM) | ||
| 40B. | 8C-5064 E | CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(33-CM) | ||
| 40C. | 8C-5064 E | CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(37-CM) | ||
| E | ORDER BY THE CENTIMETER | |||
| I | REFER TO HYDRAULIC INFORMATION SYSTEM | |||
| Y | SEPARATE ILLUSTRATION | |||
Information:
FUEL SYSTEM
PUMP GP-FUEL PRIMING
Engine News
An Improved Fuel Priming Pump Gasket Is Now Used on Certain Commercial Engines {1258, 7555}
2011/06/08
2011/06/08
An Improved Hand Operated Fuel Priming Pump Is Available for Certain Industrial Engines {1258}
2012/10/01
2012/10/01
Operation and Maintenance Manual
Special Instruction
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Installation Instructions for the Electric Fuel Priming Pump on Caterpillar Equipment With the 24 Volt System{1258}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Troubleshooting the Fuel Priming and Primary Filter Pump Gp and the Fuel Filter Base Assembly {1256, 1258, 1260, 1261, 1263}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR CONDITIONER COMPRESSOR SUPPORT HARDWARE ON CERTAIN C15 AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR CONDITIONER COMPRESSOR SUPPORT HARDWARE ON CERTAIN C15 AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR CONDITIONER COMPRESSOR SUPPORT HARDWARE ON CERTAIN C15 AND C18 COMMERCIAL ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR CONDITIONER COMPRESSOR SUPPORT HARDWARE ON CERTAIN C15 AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR CONDITIONER COMPRESSOR SUPPORT HARDWARE ON CERTAIN C15 AND C18 COMMERCIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR INSTALLING AIR CONDITIONER COMPRESSOR SUPPORT HARDWARE ON CERTAIN C15 AND C18 COMMERCIAL ENGINES
Service Letter-Asia
Service Letter-APD
Testing and Adjusting
Disassembly and Assembly
Service Magazine
