AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

138-2544 SILENCER-AIR STARTING REQUIRES AIR STARTING MOTOR WITH 1 1/4 - 11 1/2 NPT THREAD EXHAUST PORT AN ATTACHMENT C15


ELECTRICAL AND STARTING SYSTEM
STARTING MOTOR GP
STARTING AID GP
STARTING MOTOR GP

INDUSTRIAL ENGINE C15 INDUSTRIAL ENGINE JRE
 C15 Industrial Engine JRE00001-UP SEBP3815 C15 JRE   (2004)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP
LUBRICATOR GP-AIR MOTOR
172-0208 LUBRICATOR GP-AIR MOTOR
PLATE AS-BRUSH
3T-9525 PLATE AS-BRUSH
SILENCER-AIR STARTING
138-2544 SILENCER-AIR STARTING
STARTING MOTOR GP-AIR
105-5080 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
105-5080 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
105-5081 STARTING MOTOR GP-AIR
 

#SEBP38151170
 

138-2544: SILENCER-AIR STARTING

138-2544 SILENCER-AIR STARTING
REQUIRES AIR STARTING MOTOR WITH 1 1/4 - 11 1/2 NPT THREAD EXHAUST PORT
AN ATTACHMENT
i00604069 SEBP3815
1382544 SILENCER-AIR STARTING Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
    (INDIVIDUAL PARTS ARE NOT SERVICED SEPARATELY)
 

#SEBP38151171
 

221-5430: STARTING AID GP-ETHER

221-5430 STARTING AID GP-ETHER
24 VOLT
CANNOT BE USED WITH MECHANICAL ENGINES
AN ATTACHMENT
i01891430 SEBP3815
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  127-7443 [1] ATOMIZER AS  
    ON C-15 & C-16 INSTALL WITH ORIFICE DIRECTED TOWARD ENGINE
  3B-6768 [1] BUSHING-REDUCER  
  7N-2059 [1] CLAMP AS (CYLINDER)  
  5P-2948 [1] FITTING AS  
  4K-9821 [1] SLEEVE  
  4K-9822 [1] NUT (5/16-24-THD)  
  230-1434 [1] FITTING AS  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)(ETHER STARTING AID)  
    (INCLUDES PLUG AS & WEDGE)
  3E-5239 [1] RELAY AS (24-VOLT)(STARTING AID)  
    THIS RELAY MUST BE ISOLATED FROM ENGINE VIBRATION
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2V-1713 [1] TAG-NOTICE (STARTING AID)  
  7E-8866 [4] TERMINAL-BLADE (14-GA TO 16-GA)  
  7N-0140 [1] TUBE AS-COIL  
  8N-3536 [1] TUBE-STEEL  
  228-0853 [1] VALVE GP-ETHER STARTING (24-VOLT)(STARTING AID)  
  7N-9801 [1] GASKET  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)(ETHER VALVE)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  3E-3362 [1] WEDGE-PLUG LOCK (2-PIN)  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)(3M)  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
    (MAY BE PROCURED LOCALLY FROM CAT DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
 

#SEBP38151172
 

260-3932: STARTING AID GP-ETHER

260-3932 STARTING AID GP-ETHER
12 VOLT CONTINUOUS FLOW SYSTEM
CANNOT BE USED WITH MECHANICAL ENGINES
AN ATTACHMENT
i02509995 SEBP3815
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  127-7443 [1] ATOMIZER AS  
    (ON C-15 & C-18 INSTALL WITH ORIFICE DIRECTED TOWARD ENGINE)
  3B-6768 [1] BUSHING-REDUCER  
  7N-2059 [1] CLAMP AS (CYLINDER)  
  230-1434 [1] FITTING AS  
  236-4545 NUT-SLEEVE (5/16-24-THD)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2V-1713 [1] TAG-NOTICE (STARTING AID)  
  7N-0140 [1] TUBE AS-COIL  
  8N-3536 [1] TUBE-STEEL  
  260-1844 Y [1] VALVE GP-ETHER STARTING (12-VOLT)  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)(3-M)  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
    (MAY BE PROCURED LOCALLY FROM CAT DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP38151173
 

260-3934: STARTING AID GP-ETHER

260-3934 STARTING AID GP-ETHER
24 VOLT CONTINUOUS FLOW SYSTEM
CANNOT BE USED WITH MECHANICAL ENGINES
ALSO AN ATTACHMENT
i02509999 SEBP3815
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  127-7443 [1] ATOMIZER AS  
    (ON C-15 & C-18 INSTALL WITH ORIFICE DIRECTED TOWARD ENGINE)
  3B-6768 [1] BUSHING-REDUCER  
  7N-2059 [1] CLAMP AS (CYLINDER)  
  230-1434 [1] FITTING AS  
  236-4545 [1] NUT-SLEEVE (5/16-24-THD)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)(ETHER START AID)  
    (INCLUDES PLUG AS & WEDGE)
  186-3736 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2V-1713 [1] TAG-NOTICE (STARTING AID)  
  7N-0140 [1] TUBE AS-COIL  
  8N-3536 [1] TUBE-STEEL  
  239-1134 Y [1] VALVE GP-ETHER STARTING (24-VOLT)  
  5P-5623 BD WIRE-ELECTRICAL (16-GA, BLACK)(3-M)  
   
  7N-0296 A [1] CYLINDER AS-ETHER  
    (MAY BE PROCURED LOCALLY FROM CAT DEALER)
  A   NOT PART OF THIS GROUP
  B   USE AS REQUIRED
  D   ORDER BY THE METER
  Y   SEPARATE ILLUSTRATION
 

#SEBP38151174
 

105-5080: STARTING MOTOR GP-AIR

105-5080 STARTING MOTOR GP-AIR
S/N JRE1-UP
PART OF 136-2640 STARTING MOTOR GP-AIR
AN ATTACHMENT
i00481267 SEBP3815
1055080 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4371 [1] COVER AS-HOUSING  
  7M-7410 [3] PLUG-PIPE  
2. 4N-4375 [1] BALL BEARING  
3. 4N-4377 [1] PLATE-REAR END  
4. 4N-4383 [1] HOUSING-MOTOR  
5. 4N-4390 [1] WASHER-THRUST (0.797X1.50X0.125-IN THK)  
6. 4N-4391 [1] KEY-GEAR  
7. 4N-4387 [1] CASE AS-GEAR  
  4N-4388 [1] WASHER-SPECIAL  
  009-1436 [1] BEARING  
8. 4N-4394 [1] GEAR-DRIVE (45-TEETH)  
9. 5F-8651 [1] BALL BEARING  
10. 105-5136 [4] WASHER (9.92X16.67X0.79-MM THK)  
11. 4N-4397 [1] COLLAR-DRIVE SHAFT  
12. 3P-0653 [1] SEAL-O-RING  
13. 4N-4403 [1] SPRING-RING  
14. 105-5138 [1] HOUSING  
15. 4N-4405 [1] CLUTCH AS-DRIVE  
16. 4N-4421 [1] SHAFT-DRIVE  
17. 105-5137 [1] PISTON  
18. 4N-4400 [1] RING-SHIFT  
19. 4N-4402 [1] SPACER (2.156X2.375X0.188-IN THK)  
20. 052-0512 [1] RING-RETAINING (INTERNAL)  
21. 4N-4386 [1] RETAINER-PINION  
22. 4N-4413 [1] PINION-ROTOR  
23. 9B-9774 [1] BALL BEARING  
24. 4N-4384 [1] GASKET-GEAR CASE  
25. 4N-4382 [1] PLATE-FRONT END  
26. 4N-4381 [1] ROTOR  
27. 4N-4376 [1] GASKET-HOUSING COVER  
28. 5L-4035 [1] RING-RETAINING (EXTERNAL)  
29. 8F-8544 [4] BOLT (3/8-16X6.25-IN)  
30. 7B-2742 [12] BOLT (1/4-20X1.25-IN)  
31. 5P-0537 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 4N-4409 [1] DEFLECTOR AS  
33. 8T-6763 [2] PLUG-PIPE (1/4-18-THD)  
34. 4N-4378 [1] CYLINDER  
35. 6D-3787 [1] BEARING-ROLLER  
36. 4N-4392 [1] COVER AS-CASE  
  4N-4393 [1] SEAL-LIP TYPE  
  6J-2244 [1] SEAL-O-RING  
  6V-1179 [1] SEAL-O-RING  
37. 4N-4379 [1] DOWEL-CYLINDER  
38. 4N-4380 [1] KIT-VANE (AIR STARTING MOTOR)  
 

#SEBP38151175
 

105-5080: STARTING MOTOR GP-AIR

105-5080 STARTING MOTOR GP-AIR
PART OF 136-2640 STARTING MOTOR GP-AIR
AN ATTACHMENT
i03177101 SEBP3815
1055080 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4371 [1] COVER AS-HOUSING  
  7M-7410 [3] PLUG-PIPE  
2. 4N-4375 [1] BALL BEARING  
3. 4N-4377 [1] PLATE-REAR END  
4. 4N-4383 [1] HOUSING-MOTOR  
5. 4N-4390 [1] WASHER-THRUST (0.797X1.50X0.125-IN THK)  
6. 4N-4391 [1] KEY-GEAR  
7. 4N-4387 [1] CASE AS-GEAR  
7A. 009-1436 [1] BEARING  
  4N-4388 [1] WASHER-SPECIAL  
8. 4N-4394 [1] GEAR-DRIVE (45-TEETH)  
9. 5F-8651 [1] BALL BEARING  
10. 105-5136 [4] WASHER (9.92X16.67X0.79-MM THK)  
11. 4N-4397 [1] COLLAR-DRIVE SHAFT  
12. 3P-0653 [1] SEAL-O-RING  
13. 4N-4403 [1] SPRING-RING  
14. 105-5138 [1] HOUSING  
15. 4N-4405 [1] CLUTCH AS-DRIVE  
16. 4N-4421 [1] SHAFT-DRIVE  
17. 105-5137 [1] PISTON  
18. 4N-4400 [2] RING-SHIFT  
19. 4N-4402 [1] SPACER (2.156X2.375X0.188-IN THK)  
20. 052-0512 [1] RING-RETAINING (INTERNAL)  
21. 4N-4386 [1] RETAINER-PINION  
22. 4N-4413 [1] PINION-ROTOR  
23. 9B-9774 [1] BALL BEARING  
24. 4N-4384 [1] GASKET-GEAR CASE  
25. 4N-4382 [1] PLATE-FRONT END  
26. 4N-4381 [1] ROTOR  
27. 4N-4376 [1] GASKET-HOUSING COVER  
28. 5L-4035 [1] RING-RETAINING (EXTERNAL)  
29. 8F-8544 [4] BOLT (3/8-16X6.25-IN)  
30. 7B-2742 C [9] BOLT (1/4-20X1.25-IN)  
31. 5P-0537 C [9] WASHER-HARD (7.2X14.5X2-MM THK)  
32. 4N-4409 [1] DEFLECTOR AS  
33. 8T-6763 [2] PLUG-PIPE (1/4-18-THD)  
34. 4N-4378 [1] CYLINDER  
35. 6D-3787 [1] BEARING-ROLLER  
36. 4N-4392 [1] COVER AS-CASE  
  4N-4393 [1] SEAL-LIP TYPE  
  6J-2244 [1] SEAL-O-RING  
  6V-1179 [1] SEAL-O-RING  
37. 4N-4379 [1] DOWEL-CYLINDER  
38. 4N-4380 [1] KIT-VANE (AIR STARTING MOTOR)  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP38151176
 

105-5081: STARTING MOTOR GP-AIR

105-5081 STARTING MOTOR GP-AIR
S/N JRE1-UP
PART OF 136-2641 STARTING MOTOR GP-AIR
AN ATTACHMENT
i00481268 SEBP3815
1055081 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4375 [1] BALL BEARING  
2. 4N-4377 [1] PLATE-REAR END  
3. 4N-4383 [1] HOUSING-MOTOR  
4. 4N-4379 [1] DOWEL-CYLINDER  
5. 4N-4390 [1] WASHER-THRUST (0.797X1.50X0.125-IN THK)  
6. 4N-4391 [1] KEY-GEAR  
7. 4N-4387 [1] CASE AS-GEAR  
  4N-4388 [1] WASHER-SPECIAL  
  009-1436 [1] BEARING  
8. 4N-4394 [1] GEAR-DRIVE (45-TEETH)  
9. 5F-8651 [1] BALL BEARING  
10. 4N-4392 [1] COVER AS-CASE  
10A. 4N-4393 [1] SEAL-LIP TYPE  
10B. 6J-2244 [1] SEAL-O-RING  
10C. 6V-1179 [1] SEAL-O-RING  
11. 4N-4397 [1] COLLAR-DRIVE SHAFT  
12. 105-5136 [4] WASHER (9.92X16.67X0.79-MM THK)  
13. 3P-0653 [1] SEAL-O-RING  
14. 4N-4403 [1] SPRING-RING  
15. 105-5138 [1] HOUSING  
16. 4N-4405 [1] CLUTCH AS-DRIVE  
17. 4N-4421 [1] SHAFT-DRIVE  
18. 105-5137 [1] PISTON  
19. 4N-4400 [1] RING-SHIFT  
20. 4N-4402 [1] SPACER (2.156X2.375X0.188-IN THK)  
21. 052-0512 [1] RING-RETAINING (INTERNAL)  
22. 4N-4386 [1] RETAINER-PINION  
23. 4N-4413 [1] PINION-ROTOR  
24. 9B-9774 [1] BALL BEARING  
25. 4N-4384 [1] GASKET-GEAR CASE  
26. 4N-4382 [1] PLATE-FRONT END  
27. 4N-4378 [1] CYLINDER  
28. 4N-4381 [1] ROTOR  
29. 4N-4376 [1] GASKET-HOUSING COVER  
30. 5L-4035 [1] RING-RETAINING (EXTERNAL)  
31. 8F-8544 [4] BOLT (3/8-16X6.25-IN)  
32. 7B-2742 [12] BOLT (1/4-20X1.25-IN)  
33. 5P-0537 [12] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 4N-4409 [1] DEFLECTOR AS (ROAD SPLASH)  
35. 8T-6763 [2] PLUG-PIPE (1/4-18-THD)  
36. 6D-3787 [1] BEARING-ROLLER  
37. 4N-4380 [1] KIT-VANE (AIR STARTING MOTOR)  
38. 4N-4371 [1] COVER AS-HOUSING  
  7M-7410 [1] PLUG-PIPE  
 

#SEBP38151177
 

105-5081: STARTING MOTOR GP-AIR

105-5081 STARTING MOTOR GP-AIR
PART OF 136-2641 STARTING MOTOR GP-AIR
AN ATTACHMENT
i03177168 SEBP3815
1055081 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4N-4375 [1] BALL BEARING  
2. 4N-4377 [1] PLATE-REAR END  
3. 4N-4383 [1] HOUSING-MOTOR  
4. 4N-4379 [1] DOWEL-CYLINDER  
5. 4N-4390 [1] WASHER-THRUST (0.797X1.50X0.125-IN THK)  
6. 4N-4391 [1] KEY-GEAR  
7. 4N-4387 [1] CASE AS-GEAR  
7A. 4N-4388 [1] WASHER-SPECIAL  
7B. 009-1436 [1] BEARING  
8. 4N-4394 [1] GEAR-DRIVE (45-TEETH)  
9. 5F-8651 [1] BALL BEARING  
10. 4N-4392 [1] COVER AS-CASE  
10A. 4N-4393 [1] SEAL-LIP TYPE  
10B. 6J-2244 [1] SEAL-O-RING  
10C. 6V-1179 [1] SEAL-O-RING  
11. 4N-4397 [1] COLLAR-DRIVE SHAFT  
12. 105-5136 [4] WASHER (9.92X16.67X0.79-MM THK)  
13. 3P-0653 [1] SEAL-O-RING  
14. 4N-4403 [1] SPRING-RING  
15. 105-5138 [1] HOUSING  
16. 4N-4405 [1] CLUTCH AS-DRIVE  
17. 4N-4421 [1] SHAFT-DRIVE  
18. 105-5137 [1] PISTON  
19. 4N-4400 [2] RING-SHIFT  
20. 4N-4402 [1] SPACER (2.156X2.375X0.188-IN THK)  
21. 052-0512 [1] RING-RETAINING (INTERNAL)  
22. 4N-4386 [1] RETAINER-PINION  
23. 4N-4413 [1] PINION-ROTOR  
24. 9B-9774 [1] BALL BEARING  
25. 4N-4384 [1] GASKET-GEAR CASE  
26. 4N-4382 [1] PLATE-FRONT END  
27. 4N-4378 [1] CYLINDER  
28. 4N-4381 [1] ROTOR  
29. 4N-4376 [1] GASKET-HOUSING COVER  
30. 5L-4035 [1] RING-RETAINING (EXTERNAL)  
31. 8F-8544 [4] BOLT (3/8-16X6.25-IN)  
32. 7B-2742 C [9] BOLT (1/4-20X1.25-IN)  
33. 5P-0537 C [9] WASHER-HARD (7.2X14.5X2-MM THK)  
34. 4N-4409 [1] DEFLECTOR AS (ROAD SPLASH)  
35. 8T-6763 [2] PLUG-PIPE (1/4-18-THD)  
36. 6D-3787 [1] BEARING-ROLLER  
37. 4N-4380 [1] KIT-VANE (AIR STARTING MOTOR)  
38. 4N-4371 [1] COVER AS-HOUSING  
  7M-7410 [1] PLUG-PIPE  
39. 472-7200 [2] GASKET  
40. 472-7201 [2] GASKET-HOUSING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP38151178
 

136-2640: STARTING MOTOR GP-AIR

136-2640 STARTING MOTOR GP-AIR
RH
AN ATTACHMENT
i00501799 SEBP3815
1362640 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3B-7257 [1] BUSHING-REDUCER  
2. 3B-6555 [2] ELBOW  
3. 6N-3899 [1] SPACER  
4. 100-6648 [1] BRACKET AS  
  2S-5658 [2] WASHER-HARD (17X29X3-MM THK)  
5. 6B-8128 [1] NIPPLE-PIPE  
6. 4B-7770 [1] TEE  
7. 4D-3967 [1] BUSHING-REDUCER  
8. 6V-1813 [1] FITTING  
9. 3B-6498 [1] ELBOW  
10. 6K-1972 [1] ELBOW-FLARED  
11. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
12. 2G-6777 I [1] HOSE AS  
13. 2S-5658 [2] WASHER-HARD (17X29X3-MM THK)  
14. 172-0208 Y [1] LUBRICATOR GP-AIR MOTOR  
15. 1L-2279 [1] ELBOW  
16. 7B-9008 [1] NIPPLE-PIPE  
17. 7M-9544 [1] VALVE (AIR STARTING MOTOR)  
18. 9L-4652 I [1] HOSE AS  
19. 9S-5828 [1] U-BOLT (1/4-20-THD)  
20. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
21. 9S-8750 [2] NUT-FULL (1/4-20-THD)  
22. 105-5080 Y [1] STARTING MOTOR GP-AIR  
23. 4H-7869 [1] GASKET  
24. 4N-3410 [1] VALVE AS-CONTROL (STARTING)  
  2W-0629 [1] KNOB-ENGINE START  
25. 6L-9781 [1] CONNECTOR  
26. 6D-3479 [1] CLIP (LOOP)  
27. 0T-0102 [1] BOLT (3/8-16X0.625-IN)  
28. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
29. 5J-7303 [2] ELBOW  
30. 3V-6153 I [1] HOSE AS  
31. 3N-4411 I [1] HOSE AS  
32. 3B-7280 [1] NIPPLE-PIPE  
33. 4H-7869 B [1] GASKET  
34. 061-9258 [1] TEE  
  B   USE AS REQUIRED
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP38151179
 

136-2641: STARTING MOTOR GP-AIR

136-2641 STARTING MOTOR GP-AIR
LH SIDE
FOR USE WITH AIR PRESSURE REGULATOR, IF AIR SUPPLY EXCEEDS 1034 KPA(150PSI)
CANNOT BE USED WITH COVER GP
AN ATTACHMENT
i00501805 SEBP3815
1362641 STARTING MOTOR GP-AIR Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 105-5081 Y [1] STARTING MOTOR GP-AIR  
2. 3B-7257 [1] BUSHING-REDUCER  
3. 3B-6555 [2] ELBOW  
4. 9S-5828 [1] U-BOLT (1/4-20-THD)  
5. 6N-3899 [1] SPACER  
6. 9L-4652 I [1] HOSE AS  
7. 4B-7770 [1] TEE  
8. 4D-3967 [1] BUSHING-REDUCER  
9. 6V-1813 [1] FITTING  
10. 101-3998 [1] BRACKET AS  
  2S-5658 [2] WASHER-HARD (17X29X3-MM THK)  
11. 6K-1972 [1] ELBOW-FLARED  
12. 6N-3246 I [1] HOSE AS  
13. 176-2543 [3] BOLT-12 POINT HEAD (5/8-11X1.75-IN)  
14. 2S-5658 [2] WASHER-HARD (17X29X3-MM THK)  
15. 061-9258 [1] TEE  
16. 6L-9781 [1] CONNECTOR  
17. 4N-3410 [1] VALVE AS-CONTROL (STARTING)  
  2W-0629 [1] KNOB-ENGINE START  
18. 4H-7869 [1] GASKET  
19. 9S-8750 [2] NUT-FULL (1/4-20-THD)  
20. 5P-0537 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
22. 7M-9544 [1] VALVE (AIR STARTING MOTOR)  
23. 3B-7280 [1] NIPPLE-PIPE  
24. 1L-2279 [1] ELBOW  
25. 6B-8129 [2] NIPPLE-PIPE  
26. 172-0208 Y [1] LUBRICATOR GP-AIR MOTOR  
27. 3B-6498 [1] ELBOW  
28. 4W-4536 I [1] HOSE AS  
29. 7V-1037 I [1] HOSE AS  
30. 5J-7303 [2] ELBOW  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
A New Air Motor Lubricator Gp Is Used and A New Fitting Is Available for Service on Certain Engines {1451, 1451}
2010/11/05
A New Seal Improves Starter Durability on Certain Industrial Engines {1453, 7555}
2013/03/27
Cat<SUP>&reg;</SUP> Reman Has Added Alternators and Starting Motor Groups for Certain Engines and Generator Set Engines {1405, 1453}
2014/08/08
Operation and Maintenance Manual
Starting Motor - Inspect
C15 Industrial Engines
Cold Weather Starting
C15 Industrial Engines
Starting the Engine
C15 Industrial Engines
Special Instruction
Caterpillar PRELUB<SUP>&reg;</SUP> Diagnostics{1469}
Caterpillar PRELUB® Diagnostics{1469}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat<SUP>&reg;</SUP> Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Technical Information Bulletin
Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}
Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}
Specifications
Electric Starting Motor
C15 and C18 Industrial Engines
Electric Starting Motor
C15 and C18 Industrial Engines
Electric Starting Motor
C15 and C18 Industrial Engines
Electric Starting Motor
C15 and C18 Industrial Engines
Electric Starting Motor
C15 and C18 Industrial Engines
Electric Starting Motor
C15 and C18 Industrial Engines
Electric Starting Motor
C15 and C18 Industrial Engines
Electric Starting Motor
C15 and C18 Industrial Engines
Electric Starting Motor
C15 and C18 Industrial Engines
Information Release Memo
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
Testing and Adjusting
Electric Starting System - Test
C15 and C18 Industrial Engines
Pinion Clearance - Adjust
C15 and C18 Industrial Engines
Disassembly and Assembly
Electric Starting Motor - Remove and Install
C15 and C18 Industrial Engines

Caterpillar Parts SIS Catalog C15 :

SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5013 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
234-5012 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
229-9985 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8392 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
197-8391 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
145-7028 SENSOR GP-TEMPERATURE
221-5430 STARTING AID GP-ETHER
260-3932 STARTING AID GP-ETHER
260-3934 STARTING AID GP-ETHER
STARTING MOTOR GP-AIR
105-5080 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
105-5080 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
105-5081 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
105-5081 STARTING MOTOR GP-AIR
STARTING MOTOR GP-AIR
136-2640 STARTING MOTOR GP-AIR

Truck sale:

Caterpillar C15, Construction
96,000 USD 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C15, Construction
65,000 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C15, Construction
28,700 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C15, Construction
29,650 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C15, Construction
38,300 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.