207-1564 STARTING MOTOR GP-ELECTRIC S/N JRE13588-UP; MCW510-UP 24-VOLT PART OF 120-9099, 177-1655 STARTING MOTOR GP-ELECTRIC FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@ ALSO AN ATTACHMENT C15

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

0. 207-1564 STARTING M
1. 272-7123 STARTING M
2. 331-6081 STARTING M
3. 331-6081 STARTING M
4. 331-6081 STARTING M
5. 338-3454 STARTING M
6. 352-9765 STARTING M
7. 352-9767 STARTING M
8. 357-7354 STARTING M
9. 362-3292 STARTING M
0. INFORMATION

INDUSTRIAL ENGINE C15 INDUSTRIAL ENGINE JRE
C15 Industrial Engine JRE00001-UP SEBP3815 C15 JRE (2004)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

207-1549 STARTING MOTOR GP-ELECTRIC

207-1556 STARTING MOTOR GP-ELECTRIC

207-1564 STARTING MOTOR GP-ELECTRIC

272-7123 STARTING MOTOR GP-ELECTRIC

331-6081 STARTING MOTOR GP-ELECTRIC

#SEBP38151190

207-1564: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

207-1564 STARTING MOTOR GP-ELECTRIC
S/N JRE13588-UP; MCW510-UP
24-VOLT
PART OF 120-9099, 177-1655 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
ALSO AN ATTACHMENT

i01573992 SEBP3815

2071564 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-3434	[6]	PLUG
2.	7T-3279	[1]	HOUSING AS (STARTING MOTOR)
3.	8T-8566	[1]	TERMINAL AS
4.	6V-8188	[4]	NUT (1/2-13-THD)
5.	7X-0562	[4]	WASHER-HARD (13.5X19X0.8-MM THK)
6.	3T-3422	[1]	WIRE AS
7.	7T-3278	[1]	HOLDER AS-BRUSH (STARTING MOTOR)
8.	7T-3277	[1]	COIL AS-FIELD
9.	7T-3454	[1]	INSULATOR
10.	283-1107	[1]	KIT-CONNECTOR (STARTING MOTOR)
	3E-7853	[1]	TERMINAL
	5S-7349	[1]	BOLT (1/4-20X0.5-IN)
	278-0592	[1]	CONNECTOR
11.	7T-3451	[1]	KIT-INSULATOR (STARTING MOTOR)
			(INCLUDES TERMINAL INSULATORS & GROMMET)
12.	8T-8569	[1]	INSULATOR-TERMINAL
13.	5S-7349	[4]	BOLT (1/4-20X0.5-IN)
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	8H-1141	[4]	SHOE-POLE
16.	3R-8797	[8]	SCREW & WASHER AS (3/8-24X0.72-IN)
17.	7T-3276	[1]	ARMATURE AS (24-VOLT)
18.	7T-3973	[1]	HOUSING AS-LEVER
19.	4M-1831	[1]	PLUG-LEVER HOUSING
20.	7L-2894	[1]	GASKET
21.	0S-1597	[5]	BOLT (1/4-28X1-IN)
22.	6N-3826	[1]	DRIVE AS-MOTOR
23.	7T-3974	[1]	HOUSING AS-DRIVE
24.	7X-3373	[6]	BOLT (5/16-18X0.88-IN)
25.	548-9596	[1]	KIT-SOLENOID (24-VOLT)
			(KIT INCLUDES NUTS, CONNECTORS, AND BOLT)
26.	6V-8378	[2]	NUT (10-32-THD)
27.	8F-1434	[2]	LOCKWASHER
28.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
29.	8T-9884	[1]	KIT-INSULATOR (STARTING MOTOR)
			(INCLUDES INSULATORS & BUSHING)
30.	8C-3655	[1]	KIT-BRUSH (STARTING MOTOR)
			(INCLUDES SEAL, BRUSHES, SPRINGS, SCREWS & SCREW ASSEMBLIES)
31.	7T-3268	[1]	KIT-LEVER (STARTING MOTOR)
			(INCLUDES NUT, GASKET, RETAINER, SEALS & LEVER ASSEMBLIES)

			AVAILABLE REPAIR KIT(S):
	7T-3267	[1]	KIT-BUSHING (STARTING MOTOR)
			(INCLUDES BUSHINGS, WICKS, CUP, SEALS, GASKET, SCREWS, WASHERS & NUT)

#SEBP38151191

272-7123: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

272-7123 STARTING MOTOR GP-ELECTRIC
S/N JRE1-UP
24 VOLT
PART OF 331-6081 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

i02365923 SEBP3815

2727123 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	3T-3424	[1]	PLUG-FELT
	9G-4101	[1]	BUSHING-END
8.	3T-9525	[1]	PLATE AS-BRUSH (STARTING MOTOR)
8A.	6T-0371	[1]	INSULATOR
8B.	5P-6298	[12]	SCREW-MACHINE (10-32X0.5-IN)
	9F-5599	[12]	LOCKWASHER
8C.	7F-3525	[6]	WASHER-SPECIAL (0.207X0.39X0.09-IN THK)
8D.	6T-0372	[1]	PLATE
8E.	3T-4709	[3]	PLATE
8F.	2L-6679	[3]	PLATE-INSULATOR
8G.	3T-4710	[3]	PLATE
8H.	6T-0363	[6]	HOLDER AS-BRUSH
			(EACH INCLUDES)
8J.	3T-9494	[1]	SPRING
9.	7F-3491	[2]	WASHER (0.516X1X0.094-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
14.	3L-3380	[1]	BUSHING-TERMINAL
15.	036-9821	[1]	WASHER
16.	4M-1828	[1]	RETAINER-SPRING
17.	306-3998	[1]	BOOT-RUBBER
18.	9M-7609	[1]	SPRING (SHIFT LEVER)
19.	4M-1827	[1]	RETAINER-SPRING
20.	8C-3089	[1]	SEAL-O-RING
21.	4M-1853	[1]	LEVER AS-SHIFT
22.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
23.	7L-2894	[4]	GASKET
24.	4M-1831	[4]	PLUG-LEVER HOUSING
25.	4M-1854	[1]	SHAFT-LEVER
26.	1H-1023	[1]	SEAL-O-RING
27.	2D-6392	[1]	SEAL-O-RING
28.	272-7152	[1]	HOUSING AS-DRIVE
29.	6N-3826	[1]	DRIVE AS-MOTOR
30.	2H-3429	[2]	RING-RETAINING
31.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
32.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
33.	6N-3279	[1]	INSULATOR
34.	036-9823	[13]	BOLT (1/4-28X1-IN)
35.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
36.	1H-2629	[3]	STRIP-INSULATION
37.	7M-0324	[1]	COIL AS-FIELD
38.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
39.	7F-3488	[6]	SHOE-POLE
40.	7M-8651	[1]	ARMATURE AS
41.	7M-0325	[1]	INSULATOR
42.	3T-9524	[6]	BRUSH AS
43.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES INSULATOR, BUSHINGS & WASHER)
44.	125-6537	[1]	INSULATOR
45.	3R-8801	[1]	CLAMP
46.	8F-1434	[2]	LOCKWASHER
47.	6V-8188	[6]	NUT (1/2-13-THD)
48.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
49.	4B-2049	[6]	NUT (10-32-THD)
50.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
51.	3T-9494	[6]	SPRING
52.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
53.	9G-4101	[1]	BUSHING-END
54.	3T-3424	[3]	PLUG-FELT
55.	3T-3423	[3]	CUP
56.	1M-9968	[1]	BUSHING
57.	2F-6678	[1]	SEAL-LIP TYPE
58.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
59.	4M-1896	[1]	BUSHING-TERMINAL
60.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
61.	125-6535	[1]	COVER-STARTING MOTOR
62.	7T-9123	[1]	GASKET-PLATE
63.	318-2082	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	3R-8801	[1]	CLAMP
64.	125-6536	[1]	TERMINAL AS

#SEBP38151192

331-6081: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

331-6081 STARTING MOTOR GP-ELECTRIC
S/N JRE1-UP
AN ATTACHMENT

i03688729 SEBP3815

3316081 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-9603	[1]	CABLE AS-STARTING MOTOR
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(28-CM)
2.	272-7123 Y	[1]	STARTING MOTOR GP-ELECTRIC (24-VOLT)
3.	303-2004	[1]	GASKET
4.	176-2543	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
	E		ORDER BY THE CENTIMETER
	Y		SEPARATE ILLUSTRATION

#SEBP38151193

331-6081: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

331-6081 STARTING MOTOR GP-ELECTRIC
Type 1
AN ATTACHMENT

i04338394 SEBP3815

For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-9603	[1]	CABLE AS-STARTING MOTOR
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(28-CM)
2.	357-7354 CY	[1]	STARTING MOTOR GP-ELECTRIC (24-VOLT)
3.	303-2004	[1]	GASKET
4.	176-2543	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP38151194

331-6081: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

331-6081 STARTING MOTOR GP-ELECTRIC
Type 2
AN ATTACHMENT

i06845665 SEBP3815

For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8Y-9603	[1]	CABLE AS-STARTING MOTOR
	1S-7251	[1]	TERMINAL-CABLE (00-GA, 1/2-IN SCREW)
	1S-7252	[1]	TERMINAL-CABLE (00-GA, 3/8-IN SCREW)
	5P-0747 E		CABLE (00-GA, BLACK)(28-CM)
2.	478-9866 CY	[1]	STARTING MOTOR GP-ELECTRIC
3.	303-2004	[1]	GASKET
4.	176-2543	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP38151195

338-3454: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 120-9100 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT FOR @@@@@352-9767@@@@@, @@@@@ 6V-0885@@@@@
ALSO AN ATTACHMENT

i03784531 SEBP3815

3383454 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	3T-3424	[1]	PLUG-FELT
	9G-4101	[1]	BUSHING-END
8.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	125-6535	[1]	COVER-STARTING MOTOR
14.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
15.	3L-3380	[1]	BUSHING-TERMINAL
16.	8C-3089	[1]	SEAL-O-RING
17.	4M-1853	[1]	LEVER AS-SHIFT
18.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
19.	7L-2894	[4]	GASKET
20.	4M-1831	[4]	PLUG-LEVER HOUSING
21.	4M-1854	[1]	SHAFT-LEVER
22.	1H-1023	[1]	SEAL-O-RING
23.	2D-6392	[1]	SEAL-O-RING
24.	494-6475	[1]	HOUSING AS-DRIVE
25.	6N-3826	[1]	DRIVE AS-MOTOR
26.	2H-3429	[1]	RING-RETAINING
27.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
28.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
29.	6N-3279	[1]	INSULATOR
30.	0S-1597	[13]	BOLT (1/4-28X1-IN)
31.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
32.	1H-2629	[3]	STRIP-INSULATION
33.	7M-0324	[1]	COIL AS-FIELD
34.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
35.	7F-3488	[6]	SHOE-POLE
36.	7M-8651	[1]	ARMATURE AS
37.	7M-0325	[1]	INSULATOR
38.	3T-9524	[6]	BRUSH AS
39.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES BUSHINGS & WASHERS)
40.	338-3453	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
40A.	3R-8801	[1]	CLAMP
42.	8F-1434	[2]	LOCKWASHER
43.	6V-8188	[6]	NUT (1/2-13-THD)
44.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
45.	4B-2049	[6]	NUT (10-32-THD)
46.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
47.	3T-9494	[6]	SPRING
48.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
49.	9G-4101	[1]	BUSHING-END
50.	3T-3424	[3]	PLUG-FELT
51.	3T-3423	[3]	CUP
52.	1M-9968	[1]	BUSHING
53.	2F-6678	[1]	SEAL-LIP TYPE
54.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
55.	4M-1896	[1]	BUSHING-TERMINAL
56.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
	Y		SEPARATE ILLUSTRATION

#SEBP38151196

352-9765: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

352-9765 STARTING MOTOR GP-ELECTRIC
12-VOLT, 50 MT
PART OF 153-7290 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

i04047142 SEBP3815

3529765 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
2.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
3.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	3T-3424	[1]	PLUG-FELT
	9G-4101	[1]	BUSHING-END
4.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
5.	3T-3422	[1]	WIRE AS (STARTING MOTOR)
6.	2J-8163	[2]	SEAL-O-RING
7.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
8.	3T-3434	[6]	PLUG
9.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
10.	3L-3380	[1]	BUSHING-TERMINAL
11.	8C-3089	[1]	SEAL-O-RING
12.	4M-1853	[1]	LEVER AS-SHIFT
13.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
14.	7L-2894	[4]	GASKET
15.	4M-1831	[4]	PLUG-LEVER HOUSING
16.	4M-1854	[1]	SHAFT-LEVER
17.	1H-1023	[1]	SEAL-O-RING
18.	2D-6392	[1]	SEAL-O-RING
19.	7T-3974	[1]	HOUSING AS-DRIVE
20.	6N-3826	[1]	DRIVE AS-MOTOR
21.	2H-3429	[1]	RING-RETAINING
22.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
23.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
24.	0S-1597	[13]	BOLT (1/4-28X1-IN)
25.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
26.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(KIT INCLUDES PLASTIC BUSHING, RUBBER BUSHING & INSULATED WASHERS)
27.	362-5020	[1]	SOLENOID AS-STARTING MOTOR (12-VOLT)
28.	3R-8801	[1]	CLAMP
29.	8F-1434	[2]	LOCKWASHER
30.	6V-8188	[6]	NUT (1/2-13-THD)
31.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
32.	4B-2049	[6]	NUT (10-32-THD)
33.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
34.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
35.	9G-4101	[1]	BUSHING-END
36.	3T-3424	[3]	PLUG-FELT
37.	3T-3423	[3]	CUP
38.	1M-9968	[1]	BUSHING
39.	2F-6678	[1]	SEAL-LIP TYPE
40.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
41.	4M-1896	[1]	BUSHING-TERMINAL
42.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
44.	125-6535	[1]	COVER-STARTING MOTOR

#SEBP38151197

352-9767: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

352-9767 STARTING MOTOR GP-ELECTRIC
S/N JRE1-UP; MCW650-UP
24-VOLT
PART OF 362-3292, 5N-2685 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@338-3454@@@@@
FIELD REPLACEMENT FOR @@@@@ 6V-0885@@@@@
ALSO AN ATTACHMENT

i03997313 SEBP3815

3529767 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	3T-3424	[1]	PLUG-FELT
	9G-4101	[1]	BUSHING-END
8.	3T-9525 Y	[1]	PLATE AS-BRUSH (STARTING MOTOR)
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	3T-3434	[6]	PLUG
14.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
15.	3L-3380	[1]	BUSHING-TERMINAL
16.	8C-3089	[1]	SEAL-O-RING
17.	4M-1853	[1]	LEVER AS-SHIFT
18.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
19.	7L-2894	[4]	GASKET
20.	4M-1831	[4]	PLUG-LEVER HOUSING
21.	4M-1854	[1]	SHAFT-LEVER
22.	1H-1023	[1]	SEAL-O-RING
23.	2D-6392	[1]	SEAL-O-RING
24.	7T-3974	[1]	HOUSING AS-DRIVE
25.	6N-3826	[1]	DRIVE AS-MOTOR
26.	2H-3429	[1]	RING-RETAINING
27.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
28.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
29.	6N-3279	[1]	INSULATOR
30.	0S-1597	[13]	BOLT (1/4-28X1-IN)
31.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
32.	1H-2629	[3]	STRIP-INSULATION
33.	7M-0324	[1]	COIL AS-FIELD
34.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
35.	7F-3488	[6]	SHOE-POLE
36.	7M-8651	[1]	ARMATURE AS
37.	7M-0325	[1]	INSULATOR
38.	3T-9524	[6]	BRUSH AS
39.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES BUSHINGS & WASHER)
40.	338-3453	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	3R-8801	[1]	CLAMP
41.	3R-8801	[1]	CLAMP
42.	8F-1434	[2]	LOCKWASHER
43.	6V-8188	[6]	NUT (1/2-13-THD)
44.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
45.	4B-2049	[6]	NUT (10-32-THD)
46.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
47.	3T-9494	[6]	SPRING
48.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
49.	9G-4101	[1]	BUSHING-END
50.	3T-3424	[3]	PLUG-FELT
51.	3T-3423	[3]	CUP
52.	1M-9968	[1]	BUSHING
53.	2F-6678	[1]	SEAL-LIP TYPE
54.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
55.	4M-1896	[1]	BUSHING-TERMINAL
56.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
58.	125-6535	[1]	COVER-STARTING MOTOR
	Y		SEPARATE ILLUSTRATION

#SEBP38151198

357-7354: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

357-7354 STARTING MOTOR GP-ELECTRIC
PART OF 331-6081 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

i04022695 SEBP3815

3577354 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	3T-3424	[1]	PLUG-FELT
	9G-4101	[1]	BUSHING-END
8.	3T-9525	[1]	PLATE AS-BRUSH (STARTING MOTOR)
8A.	6T-0371	[1]	INSULATOR
8B.	5P-6298	[12]	SCREW-MACHINE (10-32X0.5-IN)
	9F-5599	[12]	LOCKWASHER
8C.	7F-3525	[6]	WASHER-SPECIAL (0.207X0.39X0.09-IN THK)
8D.	6T-0372	[1]	PLATE
8E.	3T-4709	[3]	PLATE
8F.	2L-6679	[3]	PLATE-INSULATOR
8G.	3T-4710	[3]	PLATE
8H.	6T-0363	[6]	HOLDER AS-BRUSH
			(EACH INCLUDES)
8J.	3T-9494	[1]	SPRING
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
14.	3L-3380	[1]	BUSHING-TERMINAL
15.	8C-3089	[1]	SEAL-O-RING
16.	4M-1853	[1]	LEVER AS-SHIFT
17.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
18.	7L-2894	[4]	GASKET
19.	4M-1831	[4]	PLUG-LEVER HOUSING
20.	4M-1854	[1]	SHAFT-LEVER
21.	1H-1023	[1]	SEAL-O-RING
22.	2D-6392	[1]	SEAL-O-RING
23.	272-7152	[1]	HOUSING AS-DRIVE
24.	6N-3826	[1]	DRIVE AS-MOTOR
25.	2H-3429	[1]	RING-RETAINING
26.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
27.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
28.	6N-3279	[1]	INSULATOR
29.	0S-1597	[13]	BOLT (1/4-28X1-IN)
30.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
31.	1H-2629	[3]	STRIP-INSULATION
32.	7M-0324	[1]	COIL AS-FIELD
33.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
34.	7F-3488	[6]	SHOE-POLE
35.	7M-8651	[1]	ARMATURE AS
36.	7M-0325	[1]	INSULATOR
37.	3T-9524	[6]	BRUSH AS
38.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES INSULATOR, BUSHINGS, & WEDGE)
39.	338-3453	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	3R-8801	[1]	CLAMP
40.	3R-8801	[1]	CLAMP
41.	8F-1434	[2]	LOCKWASHER
42.	6V-8188	[6]	NUT (1/2-13-THD)
43.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
44.	4B-2049	[6]	NUT (10-32-THD)
45.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
46.	3T-9494	[6]	SPRING
47.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
48.	9G-4101	[1]	BUSHING-END
49.	3T-3424	[3]	PLUG-FELT
50.	3T-3423	[3]	CUP
51.	1M-9968	[1]	BUSHING
52.	2F-6678	[1]	SEAL-LIP TYPE
53.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
54.	4M-1896	[1]	BUSHING-TERMINAL
55.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
56.	125-6535	[1]	COVER-STARTING MOTOR

#SEBP38151199

362-3292: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

362-3292 STARTING MOTOR GP-ELECTRIC
RIGHT HAND
FOR USE WITH INDUSTRIAL APPLICATIONS
CANNOT BE USED WITH LEFT HAND STARTER APPLICATIONS AND TRANSMISSION OIL COOLER
ALSO AN ATTACHMENT

i04072449 SEBP3815

3623292 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	561-0633	[1]	WIRE AS
2.	9Y-6089	[1]	GASKET
3.	176-2543	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
4.	352-9767 Y	[1]	STARTING MOTOR GP-ELECTRIC (24-VOLT)
5.	4D-3704	[3]	WASHER-HARD (17X30X5-MM THK)
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

Engine News

A New Air Motor Lubricator Gp Is Used and A New Fitting Is Available for Service on Certain Engines {1451, 1451}
2010/11/05

A New Seal Improves Starter Durability on Certain Industrial Engines {1453, 7555}
2013/03/27

Cat® Reman Has Added Alternators and Starting Motor Groups for Certain Engines and Generator Set Engines {1405, 1453}
2014/08/08

Operation and Maintenance Manual

Starting Motor - Inspect
C15 Industrial Engines

Cold Weather Starting
C15 Industrial Engines

Starting the Engine
C15 Industrial Engines

Special Instruction

Caterpillar PRELUB® Diagnostics{1469}
Caterpillar PRELUB^® Diagnostics{1469}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Technical Information Bulletin

Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}
Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}

Specifications

Electric Starting Motor
C15 and C18 Industrial Engines

Information Release Memo

CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS

Testing and Adjusting

Electric Starting System - Test
C15 and C18 Industrial Engines

Pinion Clearance - Adjust
C15 and C18 Industrial Engines

Disassembly and Assembly

Electric Starting Motor - Remove and Install
C15 and C18 Industrial Engines

Caterpillar Parts SIS Catalog C15 :

207-1556 STARTING MOTOR GP-ELECTRIC

207-1549 STARTING MOTOR GP-ELECTRIC

207-1532 STARTING MOTOR GP-ELECTRIC

177-1655 STARTING MOTOR GP-ELECTRIC

153-7290 STARTING MOTOR GP-ELECTRIC

120-9101 STARTING MOTOR GP-ELECTRIC

120-9100 STARTING MOTOR GP-ELECTRIC

272-7123 STARTING MOTOR GP-ELECTRIC

331-6081 STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC

352-9765 STARTING MOTOR GP-ELECTRIC

352-9767 STARTING MOTOR GP-ELECTRIC

357-7354 STARTING MOTOR GP-ELECTRIC

Truck sale:

96,000 USD

Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

65,000

Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

28,700

Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait

29,650

Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait

38,300

Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait