AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

264-2352 WIRING GP-ELECTRONIC CONTROL Type 1 ALSO AN ATTACHMENT C15 INDUSTRIAL ENGINE


ELECTRICAL AND STARTING SYSTEM
WIRING GP

INDUSTRIAL ENGINE C15 INDUSTRIAL ENGINE JRE
 C15 Industrial Engine JRE00001-UP SEBP3815 C15 JRE   (2004)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-ALTERNATOR
313-1361 WIRING GP-ALTERNATOR
WIRING GP-ALTERNATOR
353-5299 WIRING GP-ALTERNATOR
WIRING GP-ELECTRONIC CONTROL
264-2352 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
264-2352 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
358-5521 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
359-0920 WIRING GP-ELECTRONIC CONTROL
 

#SEBP38151230
 

264-2352: WIRING GP-ELECTRONIC CONTROL

264-2352 WIRING GP-ELECTRONIC CONTROL
Type 1
ALSO AN ATTACHMENT
i02312561 SEBP3815
2642352 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [2] STRAP-CABLE  
2. 9M-9224 [2] SPACER (0.406X0.75X1.688-IN THK)  
3. 124-3414 [1] BRACKET  
4. 131-5526 Y [1] FASTENER GP-WIRING HARNESS  
5. 264-2354 [1] HARNESS AS-CONTROL (ENGINE)  
  6I-4348 [1] BOOT (40-PIN)  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  133-0969 [2] CONNECTOR-SOCKET (16-GA TO 18-GA)  
  237-0336 [1] COVER (CONNECTOR)  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
  180-9339 [38] PIN-CONNECTOR (14-GA TO 18-GA)  
  126-1767 [7] PIN-CONNECTOR (14-GA TO 16-GA)  
  133-0967 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  8T-8737 [28] PLUG-SEAL  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  8T-8736 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  180-9340 [35] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  126-1768 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  3S-2093 [1] STRAP-CABLE  
  131-1490 [1] TERMINAL AS (6-GA TO 8-GA)  
  2L-8069 [1] TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(45-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(20-CM)  
  5P-6001 D TUBE-HEAT SHRINK (4.75-MM DIA)(0.2-M)  
6. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
7. 0T-0573 [2] BOLT (3/8-16X2.75-IN)  
8. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
9. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6V-8801 [2] NUT (3/8-16-THD)  
11. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
12. 3E-6443 [1] CAP-CONNECTOR  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP38151231
 

264-2352: WIRING GP-ELECTRONIC CONTROL

264-2352 WIRING GP-ELECTRONIC CONTROL
Type 2
ALSO AN ATTACHMENT
i07133091 SEBP3815
2642352 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6443 [1] CAP-CONNECTOR  
2. 7K-1181 C [5] STRAP-CABLE  
3. 124-3414 [1] BRACKET  
4. 131-5526 Y [1] FASTENER GP-WIRING HARNESS  
5. 501-3805 CY [1] HARNESS AS-ENGINE  
6. 0S-0509 C [1] BOLT (3/8-16X0.75-IN)  
7. 0S-1588 C [1] BOLT (3/8-16X1.25-IN)  
8. 0T-0573 C [1] BOLT (3/8-16X2.75-IN)  
9. 1W-1038 C [1] STUD (3/8-16X2.75-IN)  
10. 352-3965 C [1] CLIP (LADDER)  
11. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
12. 5M-2894 C [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
13. 6V-8801 C [3] NUT (3/8-16-THD)  
14. 9M-9224 [2] SPACER (0.406X0.75X1.688-IN THK)  
15. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP38151232
 

358-5521: WIRING GP-ELECTRONIC CONTROL

358-5521 WIRING GP-ELECTRONIC CONTROL
FOR USE WITH CONTROL GP MOUNTING
AN ATTACHMENT
i04136890 SEBP3815
3585521 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6443 [1] CAP-CONNECTOR  
2. 3S-2093 [2] STRAP-CABLE  
3. 124-3414 [1] BRACKET  
4. 131-5526 Y [1] FASTENER GP-WIRING HARNESS  
5. 358-5517 [1] HARNESS AS-ENGINE  
  6I-4348 [1] BOOT (40-PIN)  
  153-2707 E CABLE-ELECTRICAL (2-CONDUCTOR, 18-GA)(163-CM)  
  8C-6354 [1] CAP-RECEPTACLE (ET CONNECTOR)  
  237-0336 [1] COVER (CONNECTOR)  
  126-1767 [5] PIN-CONNECTOR (14-GA TO 16-GA)  
  133-0967 [1] PIN-CONNECTOR (16-GA TO 18-GA)  
  144-1636 [35] PIN-CONNECTOR (14-GA TO 18-GA)  
  180-9339 [4] PIN-CONNECTOR (14-GA TO 18-GA)  
  160-7689 [1] PLUG AS-CONNECTOR (70-PIN)  
  159-9322 [1] SEAL-O-RING  
  174-0503 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  230-4011 [1] PLUG AS-CONNECTOR (2-PIN)  
  264-7029 [1] SEAL-CONNECTOR  
  8T-8737 [31] PLUG-SEAL  
  9X-1343 [1] RECEPTACLE AS-CONNECTOR (40-PIN)  
  134-2540 [1] RECEPTACLE AS-CONNECTOR (3-PIN)  
  8T-8736 [1] RECEPTACLE-CONNECTOR (9-PIN)  
  274-3780 [1] CAP-SEAL  
  126-1766 [31] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  126-1768 [10] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  133-0969 [2] CONNECTOR-SOCKET (16-GA TO 18-GA)  
  180-9340 [4] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  3S-2093 [2] STRAP-CABLE  
  131-1490 [2] TERMINAL AS (6-GA TO 8-GA)  
  125-7874 E TUBE-HEAT SHRINK (5.72-MM DIA)(45-CM)  
  125-7876 E TUBE-HEAT SHRINK (17.78-MM DIA)(20-CM)  
  5P-6001 L TUBE-HEAT SHRINK (4.75-MM DIA)(2-DM)  
6. 0S-0509 [2] BOLT (3/8-16X0.75-IN)  
7. 0T-0573 [2] BOLT (3/8-16X2.75-IN)  
8. 4B-5324 [4] WASHER (3.9X9.6X1.2-MM THK)  
9. 5M-2894 [7] WASHER-HARD (10.2X18.5X2.5-MM THK)  
10. 6V-8801 [2] NUT (3/8-16-THD)  
11. 9M-9224 [2] SPACER (0.406X0.75X1.688-IN THK)  
12. 9X-6258 [4] SCREW-MACHINE (6-32X0.5-IN)  
  E   ORDER BY THE CENTIMETER
  L   ORDER BY THE DECIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP38151233
 

359-0920: WIRING GP-ELECTRONIC CONTROL

359-0920 WIRING GP-ELECTRONIC CONTROL
Type 1
FOR USE WITH @@@@@354-0041@@@@@, SENSOR GP
ALSO AN ATTACHMENT
i04004551 SEBP3815
3590920 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 354-0049 Y [1] HARNESS AS-ENGINE  
3. 104-6202 [2] CLIP (LADDER)  
4. 132-5789 [2] CLIP (LADDER)  
5. 1A-4273 [1] BOLT (5/8-18X1.25-IN)  
6. 4P-7429 [1] CLIP (LADDER)  
7. 4P-7581 [3] CLIP (LADDER)  
8. 4P-7582 [1] CLIP (LADDER)  
9. 4P-8134 [5] CLIP (LADDER)  
10. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
11. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 7K-1181 [2] STRAP-CABLE  
13. 6K-0806 [3] STRAP-CABLE  
14. 6V-8188 [1] NUT (1/2-13-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP38151234
 

359-0920: WIRING GP-ELECTRONIC CONTROL

359-0920 WIRING GP-ELECTRONIC CONTROL
Type 2
FOR USE WITH @@@@@354-0041@@@@@, SENSOR GP
ALSO AN ATTACHMENT
i06237369 SEBP3815
3590920 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [17] STRAP-CABLE  
2. 354-0049 Y [1] HARNESS AS-ENGINE  
3. 104-6202 [2] CLIP (LADDER)  
4. 132-5789 [2] CLIP (LADDER)  
5. 1A-4273 [1] BOLT (5/8-18X1.25-IN)  
6. 4P-7429 [1] CLIP (LADDER)  
7. 4P-7581 [3] CLIP (LADDER)  
8. 4P-7582 [1] CLIP (LADDER)  
9. 4P-8134 [5] CLIP (LADDER)  
10. 5P-8247 [1] WASHER-HARD (17X32X3.5-MM THK)  
11. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
12. 7K-1181 [2] STRAP-CABLE  
13. 6K-0806 [3] STRAP-CABLE  
  Y   SEPARATE ILLUSTRATION
 

#SEBP38151235
 

416-2233: WIRING GP-ELECTRONIC CONTROL

416-2233 WIRING GP-ELECTRONIC CONTROL
S/N MCW1-UP
PART OF 480-4450, 481-4668 ENGINE AR-COMPLETE
ALSO AN ATTACHMENT
i05904871 SEBP3815
4162233 WIRING GP-ELECTRONIC CONTROL Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [23] STRAP-CABLE  
2. 7T-0266 [1] BRACKET AS  
  1F-0750 [1] NUT-WELD (3/8-16-THD)  
3. 349-7699 [1] BRACKET  
4. 354-0049 Y [1] HARNESS AS-ENGINE  
5. 0S-0509 [3] BOLT (3/8-16X0.75-IN)  
6. 104-6202 [2] CLIP (LADDER)  
7. 132-5789 [2] CLIP (LADDER)  
8. 165-3929 [1] BOLT (3/8-16X1.5-IN)  
9. 1A-4273 [3] BOLT (5/8-18X1.25-IN)  
10. 286-0693 [1] SPACER (11X25X18-MM THK)  
11. 4P-7581 [4] CLIP (LADDER)  
12. 4P-7582 [1] CLIP (LADDER)  
13. 4P-8134 [6] CLIP (LADDER)  
14. 5M-2894 [4] WASHER-HARD (10.2X18.5X2.5-MM THK)  
15. 5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP38151236
 

134-8201: WIRING GP-ENGINE

134-8201 WIRING GP-ENGINE
FOR USE WITH ELECTRIC STARTER, ALTERNATOR AND INSTRUMENT PANEL
AN ATTACHMENT
i00511479 SEBP3815
1348201 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 134-5577 [1] HARNESS AS-WIRING (ALTERNATOR, STARTING MOTOR)  
  155-2274 [3] KIT-CONNECTING PLUG (6-PIN)(WIRING HARNESS)  
    (EACH INCLUDES PLUS AS & WEDGE)
  127-5485 [1] PLUG AS-CONNECTOR (1-PIN)  
2. 6K-0806 B [3] STRAP-CABLE  
3. 2L-0273 [2] FITTING (RUBBER)  
4. 8N-0869 [1] COVER-TERMINAL (RED)  
5. 9G-8909 [1] COVER-TERMINAL (BLACK)  
6. 4P-8134 [3] CLIP (LADDER)(TIE WRAP)  
7. 0S-0509 [3] BOLT (3/8-16X0.75-IN)  
8. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
9. 2W-0619 [1] WIRE AS  
10. 3S-2093 [2] STRAP-CABLE  
  B   USE AS REQUIRED
 

#SEBP38151237
 

195-0131: WIRING GP-ENGINE

195-0131 WIRING GP-ENGINE -REMOTE MOUNTED ECM
FOR USE WITH 24-VOLT WIRING SYSTEM
ALSO AN ATTACHMENT
i01391516 SEBP3815
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  194-4613 [1] HARNESS AS-WIRING (CONTROL PANEL)  
  8T-9834 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3132 [2] SEAL-CONNECTOR (40-PIN)  
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)(WIRING HARNESS)  
    (INCLUDES PLUG AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)(WIRING HARNESS)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)(WIRING HARNESS)  
    (INCLUDES PLUG AS & WEDGE)
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)(WIRING HARNESS)  
    (INCLUDES PLUG AS & WEDGE)
  8N-1542 [1] PIN-CONNECTOR (10-GA)  
  127-5485 [1] PLUG AS-CONNECTOR (1-PIN)  
  127-5486 [1] RECEPTACLE AS-CONNECTOR (1-PIN)  
  8N-1543 [1] SOCKET-CONNECTOR (10-GA)  
  9W-0844 [2] SOCKET-CONNECTOR (14-GA TO 16-GA)  
  186-3736 [4] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  2L-8066 [1] TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)  
  2L-8081 [2] TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)  
  2L-8071 [1] TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)  
  155-2263 [1] WEDGE-PLUG LOCK (6-PIN)  
  5P-5624 D WIRE (14-GA, BLACK)(5-M)  
  5P-5622 D WIRE (10-GA, BLACK)(5-M)  
  D   ORDER BY THE METER
  M   METRIC PART
 

#SEBP38151238
 

237-4284: WIRING GP-ENGINE

237-4284 WIRING GP-ENGINE
FOR USE WITH ENGINE RADIATOR PACKAGE
CANNOT BE USED WITH TWIN TURBO CONFIGURATION
ALSO AN ATTACHMENT
i02137722 SEBP3815
2374284 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [11] STRAP-CABLE  
2. 237-4305 [1] HARNESS AS-SENSOR (COOLANT LEVEL)  
  194-5226 [6] WIRE AS (16-GA)  
    -OR-
  194-5227 [6] WIRE AS (14-GA)  
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
3. 4P-7581 [2] CLIP (LADDER)  
4. 130-0793 [1] PLUG AS  
  8T-8737 [3] PLUG-SEAL  
 

#SEBP38151239
 

237-4294: WIRING GP-ENGINE

237-4294 WIRING GP-ENGINE
S/N JRE1-1256
FOR USE WITH ENGINES USING THE A4E4V2 ECM
AN ATTACHMENT
i02120860 SEBP3815
2374294 WIRING GP-ENGINE Parts scheme 2374294 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your C15 INDUSTRIAL ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2B-2814 [2] SPACER (17.4X22.2X17.5-MM THK)  
2. 3S-2093 [23] STRAP-CABLE  
3. 239-5929 [1] HARNESS AS-ENGINE  
  102-8802 [1] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  102-8803 [2] KIT-RECEPTACLE (3-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2270 [5] KIT-CONNECTING PLUG (2-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  8T-8737 [81] PLUG-SEAL  
4. 0S-1576 [2] BOLT (5/8-18X2-IN)  
5. 104-6202 [2] CLIP (LADDER)  
6. 132-5789 [2] CLIP (LADDER)  
7. 1A-4273 [1] BOLT (5/8-18X1.25-IN)  
8. 3B-1915 [1] BOLT (3/8-16X1.375-IN)  
9. 4P-7429 [1] CLIP (LADDER)  
10. 4P-7581 [3] CLIP (LADDER)  
11. 4P-7582 [1] CLIP (LADDER)  
12. 4P-8134 [6] CLIP (LADDER)  
13. 5M-2894 [1] WASHER-HARD (10.2X18.5X2.5-MM THK)  
14. 5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
15. 8T-4223 [1] WASHER-HARD (13.5X25.5X3-MM THK)  
 

Information:

Engine News
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Improved Wiring Harnesses Are Now Used on Certain Engines {1120, 1408, 1900}
Operation and Maintenance Manual
Grounding Stud - Inspect/Clean/Tighten
C15 Industrial Engines
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Installation Procedure for 257-4183 Injector Wiring Harness Kit {1408}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Removal and Installation of the 126-1774 Endbell Cover {7553}
Procedure to Provide Power for the 266-2296 Instrument Panel Gp {1408, 7451}
Procedure to Provide Power for the 266-2296 Instrument Panel Gp {1408, 7451}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Specifications
Electronic Unit Injector Wiring
C15 and C18 Industrial Engines
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Testing and Adjusting
Electric Starting System - Test
C15 and C18 Industrial Engines
Electrical Connector - Inspect
Product Link® E640 System
Wiring Harness (Open Circuit) - Test
Product Link® E640 System
Wiring Harness (Short Circuit) - Test
Product Link® E640 System
Troubleshooting
Electrical Connectors - Inspect
C11, C13, C15, and C18 Industrial Engines
Electrical Connectors
C11, C13, C15, and C18 Industrial Engines

Caterpillar Parts SIS Catalog C15 :

WIRING GP-ALTERNATOR
353-5299 WIRING GP-ALTERNATOR
WIRING GP-ALTERNATOR
313-1361 WIRING GP-ALTERNATOR
WIRING GP-ALTERNATOR
313-1355 WIRING GP-ALTERNATOR
VALVE GP-SOLENOID
430-8405 VALVE GP-SOLENOID
VALVE GP-SOLENOID
430-8403 VALVE GP-SOLENOID
VALVE GP-ETHER STARTING
260-1844 VALVE GP-ETHER STARTING
VALVE GP-ETHER STARTING
239-1134 VALVE GP-ETHER STARTING
VALVE GP-AIR STARTING
1L-5011 VALVE GP-AIR STARTING
WIRING GP-ELECTRONIC CONTROL
264-2352 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
358-5521 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
359-0920 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
359-0920 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ELECTRONIC CONTROL
416-2233 WIRING GP-ELECTRONIC CONTROL
WIRING GP-ENGINE
134-8201 WIRING GP-ENGINE
195-0131 WIRING GP-ENGINE
WIRING GP-ENGINE
237-4284 WIRING GP-ENGINE

Truck sale:

Caterpillar C15, Construction
96,000 USD 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C15, Construction
65,000 
Caterpillar C15, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar C15, Construction
28,700 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C15, Construction
29,650 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Caterpillar C15, Construction
38,300 
Caterpillar C15, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
Kuwait
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.