340-5704 AIR COMPRESSOR GP S/N WJH1-UP; WRH4666-UP Type 2 FOR USE WITH NATURALLY ASPIRATED AIR SUPPLY LINE ONLY CANNOT BE USED WITH MID MOUNT FUEL FILTER ALSO AN ATTACHMENT C18

340-5704 AIR COMPRESSOR GP
S/N WJH1-UP; WRH4666-UP
Type 2
FOR USE WITH NATURALLY ASPIRATED AIR SUPPLY LINE ONLY
CANNOT BE USED WITH MID MOUNT FUEL FILTER
ALSO AN ATTACHMENT

i05774634 SEBP3816

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	223-3505	[1]	SEAL
2.	440-1616 CY	[1]	AIR COMPRESSOR GP
3.	430-5358	[1]	BRACKET-MOUNTING
4.	7X-0584 C	[1]	WASHER-HARD (13.5X20.5X2-MM THK)
5.	437-9937	[3]	SPACER (10.2X25.4X18-MM THK)
6.	0S-1571	[2]	BOLT (3/8-16X1.75-IN)
7.	170-0610	[1]	STUD (3/8-16-THD)
8.	175-9079 M	[1]	ROD-LINK
9.	5P-8245 C	[2]	WASHER-HARD (13.5X25.5X3-MM THK)
10.	6V-4249 M	[2]	BOLT (M10X1.5X50-MM)
11.	198-4766	[3]	WASHER-HARD (11X25X10-MM THK)
12.	1F-7958	[3]	NUT-FULL (1/2-13-THD)
13.	3E-4353	[3]	WASHER-HARD (11X25X3-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP38160121

346-3674: AIR COMPRESSOR GP

346-3674 AIR COMPRESSOR GP
S/N WJH2852-UP; WRH1-UP
PART OF 269-5347 AIR COMPRESSOR GP
AN ATTACHMENT

i03690501 SEBP3816

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	9S-4191	[1]	PLUG (9/16-18-THD)
2.	9X-2097 M	[3]	STUD (M8X1.25-THD)
3.	199-4317 M	[6]	BOLT (M10X1.5X115-MM)
4.	8T-2191	[2]	RING-RETAINING
5.	487-3382	[1]	GASKET
6.	288-1347	[2]	PLUG
7.	307-6192	[1]	GASKET
8.	307-6200	[1]	GASKET
9.	271-8090 M	[3]	BOLT-FLANGE HEAD (M6X1X65-MM)
10.	3J-1907	[1]	SEAL-O-RING
11.	3K-0360	[1]	SEAL-O-RING
12.	5E-8769	[1]	SEAL-O-RING
13.	6D-7889	[2]	SEAL-O-RING
14.	6V-3940 M	[1]	BOLT (M8X1.25X25-MM)
15.	6V-5839	[6]	WASHER (11X21X2.5-MM THK)
16.	9S-4185	[1]	PLUG (3/4-16-THD)

			AVAILABLE REPAIR KIT(S):
	307-6205	[1]	KIT-UNLOADER (AIR COMPRESSOR)
	M		METRIC PART

#SEBP38160122

385-0937: AIR COMPRESSOR GP

385-0937 AIR COMPRESSOR GP
S/N WJH3555-UP; WRH649-UP
PART OF 222-2879, 448-8809 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

i04801711 SEBP3816

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	138-9057	[1]	VALVE (PRESSURE RELIEF)
2.	099-2374 M	[2]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
3.	6V-5221 M	[4]	BOLT (M8X1.25X80-MM)
4.	8T-0267 M	[4]	BOLT-SOCKET HEAD (M6X1X12-MM)
5.	9M-1974	[4]	WASHER-HARD (8.8X16X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	217-5232	[1]	KIT-GASKET (AIR COMPRESSOR)
			(INCLUDES INLET REED VALVE/GASKET & CYLINDER HEAD GASKET)
	260-6821	[1]	KIT-SEAL
			(INCLUDES O-RING, CRANKCASE COVER GASKET, REAR COVER GASKET, & INSTRUCTION SHEET)
	335-6328	[1]	KIT-UNLOADER (AIR COMPRESSOR)
			(INCLUDES RETURN SPRING, GASKET, BALANCE PISTON, O-RING, ESS PISTON ASSEMBLY, & LUBRICANT (TUBE))
	M		METRIC PART

#SEBP38160123

440-1616: AIR COMPRESSOR GP

440-1616 AIR COMPRESSOR GP
S/N WJH1-UP; WRH110-UP
PART OF 232-5187, 340-5704 AIR COMPRESSOR GP
ALSO AN ATTACHMENT

i05406849 SEBP3816

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	9M-1974	[6]	WASHER-HARD (8.8X16X2-MM THK)
2.	225-5222	[1]	VALVE AS-PRESSURE RELIEF
	2M-9780	[1]	SEAL-O-RING
3.	099-2374 M	[4]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
4.	6V-5221 M	[6]	BOLT (M8X1.25X80-MM)
5.	8T-0267 M	[8]	BOLT-SOCKET HEAD (M6X1X12-MM)

			AVAILABLE REPAIR KIT(S):
	260-6821	[1]	KIT-SEAL
			(INCLUDES O-RING, CRANK CASE COVER GASKETS & REAR COVER GASKET)
	260-6823	[1]	KIT-GASKET
			(INCLUDES VALVE & GASKET)
	335-6328	[2]	KIT-UNLOADER (AIR COMPRESSOR)
			(EACH INCLUDES SPRING,GASKET,PISTON, O-RING & PISTON ASSEMBLY)
	M		METRIC PART

#SEBP38160124

448-8809: AIR COMPRESSOR GP

448-8809 AIR COMPRESSOR GP
S/N WJH1-UP; WRH8718-UP
PART OF 397-4079 ENGINE AR-COMPLETE
FOR USE WITH AIR INLET LINES GP
ALSO AN ATTACHMENT

i05484772 SEBP3816

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	172-4702	[2]	CLAMP
2.	220-1206 I	[1]	HOSE AS
3.	276-9507	[1]	HOSE
4.	321-7384 I	[1]	HOSE AS
5.	343-8121	[1]	CONNECTOR AS
	3J-7352	[1]	CONNECTOR
	214-7566	[1]	SEAL-O-RING
6.	385-0937 Y	[1]	AIR COMPRESSOR GP
7.	417-4758	[1]	TUBE AS
8.	351-0259	[2]	ADAPTER AS
			(EACH INCLUDES)
	6V-6609	[1]	SEAL-O-RING
	168-8806	[1]	CONNECTOR
9.	1F-7958	[3]	NUT-FULL (1/2-13-THD)
10.	223-3505	[1]	SEAL
11.	343-8115	[1]	ELBOW AS
	030-7946	[1]	ELBOW
	214-7566	[1]	SEAL-O-RING
12.	353-5130	[2]	ADAPTER AS
			(EACH INCLUDES)
	6V-6609	[1]	SEAL-O-RING
	8M-0505	[1]	ADAPTER
13.	5P-8245	[3]	WASHER-HARD (13.5X25.5X3-MM THK)
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP38160125

234-5005: BASE GP-VALVE COVER & INJ HARN

234-5005 BASE GP-VALVE COVER & INJ HARN
S/N WJH1-3073
ALSO AN ATTACHMENT

i01924803 SEBP3816

2345005 BASE GP-VALVE COVER & INJ HARN Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	123-3202 B	[3]	STRAP-CABLE
2.	6V-0128	[1]	SEAL-CONNECTOR
3.	7E-6508	[6]	CAP AS
4.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
5.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
6.	177-4152	[1]	BASE-VALVE MECHANISM COVER
7.	234-5002	[1]	HARNESS AS-ENGINE (INJECTOR, VARIABLE VALVE)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	103-8134	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3S-2093	[6]	STRAP-CABLE
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(15-CM)
	9X-3401	[12]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[12]	PIN-CONNECTOR (14-GA TO 16-GA)
8.	100-5218	[3]	CLIP
9.	100-5219	[3]	CLIP
10.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
11.	5P-0537	[8]	WASHER-HARD (7.2X14.5X2-MM THK)
12.	8H-3127	[6]	BOLT (1/4-20X0.75-IN)
13.	5P-5678 D		SEAL (3-M)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER

#SEBP38160126

234-5005: BASE GP-VALVE COVER & INJ HARN

234-5005 BASE GP-VALVE COVER & INJ HARN
S/N WJH3074-3610
ALSO AN ATTACHMENT

i03293012 SEBP3816

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	123-3202 C	[6]	STRAP-CABLE
2.	6V-0128	[1]	SEAL-CONNECTOR
3.	7E-6508	[6]	CAP AS
4.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
5.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
6.	289-8215 C	[1]	BASE-VALVE MECHANISM COVER
7.	234-5002	[1]	HARNESS AS-ENGINE (INJECTOR, VARIABLE VALVE)
8.	100-5218	[3]	CLIP
9.	100-5219	[3]	CLIP
10.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
11.	5P-0537	[8]	WASHER-HARD (7.2X14.5X2-MM THK)
12.	8H-3127	[6]	BOLT (1/4-20X0.75-IN)
13.	272-0390 C	[1]	SEAL
	C		CHANGE FROM PREVIOUS TYPE

#SEBP38160127

234-5005: BASE GP-VALVE COVER & INJ HARN

234-5005 BASE GP-VALVE COVER & INJ HARN
S/N WJH3611-6914
ALSO AN ATTACHMENT

i03363867 SEBP3816

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	6V-0128	[1]	SEAL-CONNECTOR
2.	7E-6508	[6]	CAP AS
3.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
4.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
5.	123-3202	[6]	STRAP-CABLE
6.	289-8215	[1]	BASE-VALVE MECHANISM COVER
7.	307-1610	[1]	HARNESS AS-ENGINE
	3S-2093	[6]	STRAP-CABLE
	103-8134		KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	100-5218	[3]	CLIP
9.	100-5219	[3]	CLIP
10.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
11.	5P-0537	[8]	WASHER-HARD (7.2X14.5X2-MM THK)
12.	8H-3127	[6]	BOLT (1/4-20X0.75-IN)
13.	272-0390	[1]	SEAL

#SEBP38160128

234-5005: BASE GP-VALVE COVER & INJ HARN

234-5005 BASE GP-VALVE COVER & INJ HARN
S/N WJH6915-UP; WRH1-UP
ALSO AN ATTACHMENT

i03854905 SEBP3816

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

Pos.	Part No	Qty	Parts name
1.	6V-0128	[1]	SEAL-CONNECTOR
2.	7E-6508	[6]	CAP AS
3.	9L-8925	[14]	BOLT (5/16-18X1.25-IN)
4.	122-1472	[1]	BOLT (5/16-18X2.36-IN)
5.	123-3202	[9]	STRAP-CABLE
6.	419-3614	[1]	BASE-VALVE COVER
7.	326-4512 C	[6]	MOUNTING-CABLE TIE
8.	422-1761 CY	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
9.	4F-7957	[2]	BOLT (1/4-20X0.875-IN)
10.	5P-0537 C	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
11.	272-0390	[1]	SEAL
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP38160129

278-5662: BASE GP-VALVE COVER & INJ HARN

278-5662 BASE GP-VALVE COVER & INJ HARN
S/N WJH1-3073; WRH623-3073
PART OF 363-7074 ENGINE AR-CORE
ALSO AN ATTACHMENT

i02425376 SEBP3816

2785662 BASE GP-VALVE COVER & INJ HARN Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE: