BASIC ENGINE
HOUSING GP-FLYWHEELGEAR GP
BASIC ENGINE
HOUSING GP-FLYWHEEL
#SEBP38160340
135-7634: HOUSING GP-FLYWHEEL
135-7634 HOUSING GP-FLYWHEEL
PART OF 366-9753, 397-4079 ENGINE AR-COMPLETE
FOR USE WITH LH AND RH STARTING MOTORS, SAE NO. 1 HOUSING
ALSO AN ATTACHMENT
PART OF 366-9753, 397-4079 ENGINE AR-COMPLETE
FOR USE WITH LH AND RH STARTING MOTORS, SAE NO. 1 HOUSING
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C18 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-5619 | [1] | GASKET | |
| 2. | 108-4744 | [1] | HOUSING AS-FLYWHEEL | |
| 9K-2175 | [1] | SETSCREW | ||
| 3. | 165-3929 | [8] | BOLT (3/8-16X1.5-IN) | |
| 4. | 319-0785 Y | [1] | SEAL GP-CRANKSHAFT (REAR) | |
| 5. | 5J-5793 | [9] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 6. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
| 8. | 165-3931 | [5] | BOLT (3/8-16X1.75-IN) | |
| 9. | 7X-7731 | [3] | PLUG-PIPE (3/4-14-THD) | |
| 10. | 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | |
| 11. | 8F-3030 | [1] | FLANGE | |
| 12. | 8F-1846 | [1] | GASKET | |
| 13. | 0S-1588 | [2] | BOLT (3/8-16X1.25-IN) | |
| 14. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38160341
160-6265: HOUSING GP-FLYWHEEL
For full view, you need register
Parts for your C18 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 165-3929 | [9] | BOLT (3/8-16X1.5-IN) | |
| 2. | 5M-2894 | [17] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 3. | 165-3934 | [1] | BOLT (3/8-16X2.75-IN) | |
| 4. | 165-3931 | [5] | BOLT (3/8-16X1.75-IN) | |
| 5. | 5J-5793 | [9] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 6. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 7. | 7X-7731 | [1] | PLUG-PIPE (3/4-14-THD) | |
| 8. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
| 9. | 1P-1669 | [2] | PLUG-SEAL (FLYWHEEL HOUSING DRAIN) | |
| 10. | 169-4152 | [1] | HOUSING-FLYWHEEL | |
| 11. | 0S-1619 | [1] | BOLT (3/8-16X3-IN) | |
| 12. | 2P-2772 | [1] | COVER | |
| 13. | 4N-0933 | [1] | GASKET | |
| 14. | 1A-2029 | [1] | BOLT (3/8-16X1.125-IN) | |
| 15. | 319-0785 Y | [1] | SEAL GP-CRANKSHAFT (REAR) | |
| 16. | 268-5582 C | [1] | SEAL | |
| 17. | 268-5589 C | [1] | SEAL | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38160342
219-0627: HOUSING GP-FLYWHEEL
219-0627 HOUSING GP-FLYWHEEL
PART OF 219-0626 DRIVE GP-POWER TAKE-OFF
ALSO AN ATTACHMENT
PART OF 219-0626 DRIVE GP-POWER TAKE-OFF
ALSO AN ATTACHMENT
For full view, you need register
Parts for your C18 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 353-9857 | [1] | HOUSING AS-FLYWHEEL | |
| 4N-0684 | [2] | DOWEL | ||
| 8M-9315 | [2] | BUSHING | ||
| 2. | 183-3407 | [1] | PLUG AS | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 3. | 2A-1162 | [1] | GASKET | |
| 4. | 307-2671 | [1] | PLUG AS | |
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 5. | 307-2673 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 6. | 321-8642 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8003 | [1] | PLUG (1/2-20-THD) | ||
| 214-7567 | [1] | SEAL-O-RING | ||
| 7. | 5F-0304 | [1] | PLUG | |
| 8. | 3B-0551 | [1] | PLUG-PIPE | |
#SEBP38160343
351-0059: HOUSING GP-FLYWHEEL
For full view, you need register
Parts for your C18 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 108-5914 | [1] | HOUSING AS (FLYWHEEL) | |
| 1A. | 1W-3136 | [1] | BAFFLE | |
| 1B. | 8M-9315 | [2] | BUSHING | |
| 2. | 183-3407 | [1] | PLUG AS | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 3. | 307-2671 | [1] | PLUG AS | |
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 4. | 307-2673 | [3] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 5. | 321-8642 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8003 | [1] | PLUG (1/2-20-THD) | ||
| 214-7567 | [1] | SEAL-O-RING | ||
#SEBP38160344
351-0059: HOUSING GP-FLYWHEEL
351-0059 HOUSING GP-FLYWHEEL
S/N WRH1-UP
PART OF 7E-8996 HOUSING GP-FLYWHEEL
AN ATTACHMENT
S/N WRH1-UP
PART OF 7E-8996 HOUSING GP-FLYWHEEL
AN ATTACHMENT
For full view, you need register
Parts for your C18 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 108-5914 | [1] | HOUSING AS (FLYWHEEL) | |
| 1A. | 1W-3136 | [1] | BAFFLE | |
| 1B. | 8M-9315 | [2] | BUSHING | |
| 2. | 183-3407 | [1] | PLUG AS | |
| 9S-8004 | [1] | PLUG (9/16-18-THD) | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 3. | 321-8642 | [5] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8003 | [1] | PLUG (1/2-20-THD) | ||
| 214-7567 | [1] | SEAL-O-RING | ||
| 4. | 307-2673 C | [1] | PLUG AS | |
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 5. | 307-2671 | [1] | PLUG AS | |
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP38160345
430-8379: HOUSING GP-FLYWHEEL
430-8379 HOUSING GP-FLYWHEEL
AN ATTACHMENT
AN ATTACHMENT
For full view, you need register
Parts for your C18 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-5619 | [1] | GASKET | |
| 2. | 366-6145 Y | [1] | SEAL GP-CRANKSHAFT | |
| 3. | 368-8631 | [1] | HOUSING-FLYWHEEL | |
| 4. | 165-3931 | [5] | BOLT (3/8-16X1.75-IN) | |
| 5. | 165-3929 | [8] | BOLT (3/8-16X1.5-IN) | |
| 6. | 0S-1594 | [2] | BOLT (3/8-16X1-IN) | |
| 7. | 0T-0573 | [2] | BOLT (3/8-16X2.75-IN) | |
| 8. | 8F-1846 | [1] | GASKET | |
| 9. | 5J-5793 | [9] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 10. | 5M-2894 | [2] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 11. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 12. | 7X-7731 | [3] | PLUG-PIPE (3/4-14-THD) | |
| 13. | 8F-3030 | [1] | FLANGE | |
| 14. | 8T-6765 | [2] | PLUG-PIPE (1/4-18-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38160346
7E-8996: HOUSING GP-FLYWHEEL
For full view, you need register
Parts for your C18 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 108-5914 | [1] | HOUSING AS | |
| 2. | 8M-9315 | [2] | BUSHING | |
| 3. | 9S-8005 | [2] | PLUG (3/4-16-THD) | |
| 4. | 8L-2786 | [3] | SEAL-O-RING | |
| 5. | 3K-8460 | [5] | PLUG (1/2-20-THD) | |
| 6. | 9S-4191 | [1] | PLUG (9/16-18-THD) | |
| 7. | 6V-5049 | [1] | SEAL-O-RING | |
| 8. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
| 9. | 1W-3136 | [1] | BAFFLE | |
| 10. | 9S-4182 | [1] | PLUG (7/16-20-THD) | |
| 11. | 6V-5048 | [1] | SEAL-O-RING | |
| 12. | 5P-7814 | [5] | SEAL-O-RING | |
| 13. | 1U-8846 B | SEALANT-GASKET | ||
| 14. | 165-3930 | [6] | BOLT (3/8-16X1.625-IN) | |
| 15. | 165-3932 | [6] | BOLT (3/8-16X2-IN) | |
| 16. | 5J-5793 | [1] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 17. | 9K-7290 | [8] | BOLT-12 POINT HEAD (1/2-13X3.25-IN) | |
| 18. | 165-3936 | [1] | BOLT (3/8-16X4.5-IN) | |
| 19. | 8L-2786 | [1] | SEAL-O-RING | |
| 20. | 9S-4185 | [1] | PLUG (3/4-16-THD) | |
| 21. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| B | USE AS REQUIRED | |||
#SEBP38160347
7E-8996: HOUSING GP-FLYWHEEL
For full view, you need register
Parts for your C18 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 351-0059 CY | [1] | HOUSING GP-FLYWHEEL | |
| 2. | 165-3930 | [6] | BOLT (3/8-16X1.625-IN) | |
| 3. | 165-3932 | [6] | BOLT (3/8-16X2-IN) | |
| 4. | 165-3936 | [1] | BOLT (3/8-16X4.5-IN) | |
| 5. | 307-2673 C | [1] | PLUG AS | |
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 6. | 5J-5793 | [1] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 7. | 5P-8245 | [9] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 8. | 9K-7290 | [8] | BOLT-12 POINT HEAD (1/2-13X3.25-IN) | |
| 9. | 8C-8422 B | SEALANT | ||
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38160348
186-2377: HOUSING GP-FRONT
186-2377 HOUSING GP-FRONT
FOR USE WITH @@@@@118-4914@@@@@, @@@@@118-3419@@@@@, @@@@@135-5077@@@@@
AN ATTACHMENT
FOR USE WITH @@@@@118-4914@@@@@, @@@@@118-3419@@@@@, @@@@@135-5077@@@@@
AN ATTACHMENT
For full view, you need register
Parts for your C18 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 175-1483 | [1] | HOUSING AS-FRONT | |
| 1A. | 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | |
| 2. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 3. | 5M-2894 | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4. | 0S-1588 | [8] | BOLT (3/8-16X1.25-IN) | |
| 5. | 6I-3968 | [1] | BRACKET-SUPPORT | |
| 6. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 7. | 353-9979 Y | [1] | PLATE AS-FRONT HOUSING | |
| 8. | 166-9144 | [1] | GASKET | |
| 9. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 10. | 0T-0055 | [2] | BOLT (3/8-16X4.25-IN) | |
| 11. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| 12. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 13. | 9X-6458 | [2] | WASHER-HARD (10.2X22.5X3-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38160349
224-1229: HOUSING GP-FRONT
224-1229 HOUSING GP-FRONT
FOR USE WITH OIL FILLER, FULL FRONT SOUND SUPPRESSION, ALTERNATOR MOUNTING, ACCESSORY DRIVE, RADIATOR SUPPORT, VARIOUS FASTENER COMBINATIONS AND BRACE SUPPORT GROUPS
AN ATTACHMENT
FOR USE WITH OIL FILLER, FULL FRONT SOUND SUPPRESSION, ALTERNATOR MOUNTING, ACCESSORY DRIVE, RADIATOR SUPPORT, VARIOUS FASTENER COMBINATIONS AND BRACE SUPPORT GROUPS
AN ATTACHMENT
For full view, you need register
Parts for your C18 INDUSTRIAL ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 2. | 166-9144 | [1] | GASKET | |
| 3. | 175-1483 | [1] | HOUSING AS-FRONT | |
| 3A. | 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | |
| 4. | 353-9982 Y | [1] | PLATE AS-FRONT HOUSING | |
| 5. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 6. | 0S-1588 | [10] | BOLT (3/8-16X1.25-IN)(MARKED X) | |
| 7. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 8. | 5M-2894 | [21] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN)(MARKED Z) | |
| 10. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
Information:
BASIC ENGINE
HOUSING GP-FLYWHEEL
Specifications
Testing and Adjusting
Disassembly and Assembly
Flywheel Housing - Remove and Install - Equipped with Rear Power Take-Off
C15 and C18 Industrial Engines
C15 and C18 Industrial Engines
Caterpillar Parts SIS Catalog C18 :
Truck sale:
34,700
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
34,800
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
32,850
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
36,800
Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates