440-3361 STARTING MOTOR GP-ELECTRIC 24-VOLT PART OF 442-8949 STARTING MOTOR GP-ELECTRIC FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@ AN ATTACHMENT C18

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

0. 440-3361 STARTING M
1. 442-8945 STARTING M
2. 442-8947 STARTING M
3. 442-8948 STARTING M
4. 442-8949 STARTING M
5. 442-8950 STARTING M
6. 5N-2685 STARTING M
7. 5N-2685 STARTING M
8. 6V-0885 STARTING M
9. 6V-0890 STARTING M
0. INFORMATION

INDUSTRIAL ENGINE C18 INDUSTRIAL ENGINE WJH
C18 Industrial Engine WJH00001-UP SEBP3816 C18 WJH (2004)

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

435-1239 STARTING MOTOR GP-ELECTRIC

435-1240 STARTING MOTOR GP-ELECTRIC

440-3361 STARTING MOTOR GP-ELECTRIC

442-8945 STARTING MOTOR GP-ELECTRIC

442-8947 STARTING MOTOR GP-ELECTRIC

442-8948 STARTING MOTOR GP-ELECTRIC

#SEBP38161240

440-3361: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

440-3361 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 442-8949 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@207-1556@@@@@
AN ATTACHMENT

i07330231 SEBP3816

4403361 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3T-3434	[6]	PLUG
2.	7T-3279	[1]	HOUSING AS
3.	8T-8566	[1]	TERMINAL AS
4.	6V-8188	[4]	NUT (1/2-13-THD)
5.	7X-0562	[4]	WASHER-HARD (13.5X19X0.8-MM THK)
6.	3T-3422	[1]	WIRE AS
7.	7T-3278	[1]	HOLDER AS-BRUSH
8.	7T-3277	[1]	COIL AS-FIELD
9.	7T-3454	[1]	INSULATOR
10.	7T-3268	[1]	KIT-LEVER (STARTING MOTOR)
			(INCLUDES LEVER AS, SEALS, GASKET, NUT, & RETAINER)
11.	7T-3451	[1]	KIT-INSULATOR (STARTING MOTOR)
			(INCLUDES INSULATOR TERMINALS & GROMMET)
12.	8T-8569	[1]	INSULATOR-TERMINAL
13.	5S-7349	[4]	BOLT (1/4-20X0.5-IN)
14.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
15.	8H-1141	[4]	SHOE-POLE
16.	3R-8797	[8]	SCREW & WASHER AS (3/8-24X0.72-IN)
17.	7T-3276	[1]	ARMATURE AS (24-VOLT)
18.	3E-7775	[1]	HOUSING AS
19.	4M-1831	[1]	PLUG-LEVER HOUSING
20.	7L-2894	[1]	GASKET
21.	0S-1597	[5]	BOLT (1/4-28X1-IN)
22.	6N-3826	[1]	DRIVE AS-MOTOR
23.	7T-3974	[1]	HOUSING AS-DRIVE
24.	7X-3373	[6]	BOLT (5/16-18X0.88-IN)
25.	548-9596	[1]	KIT-SOLENOID (24-VOLT)
			(INCLUDES NUTS, BOLTS, CONNECTORS & INSTRUCTION SHEET)
26.	6V-8378	[2]	NUT (10-32-THD)
27.	8F-1434	[2]	LOCKWASHER
28.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
29.	8T-9884	[1]	KIT-INSULATOR (STARTING MOTOR)
			(INCLUDES INSULATORS & BUSHING)
30.	8C-3655	[1]	KIT-BRUSH (STARTING MOTOR)
			(INCLUDES SEAL, BRUSHES, SPRINGS, & SCREWS)
31.	7T-3267	[1]	KIT-BUSHING (STARTING MOTOR)
			(INCLUDES BUSHINGS, SEALS, GASKET, CUP, WICKS, & SPACER)
32.	419-7866	[1]	SEAL-STARTER

#SEBP38161241

442-8945: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

442-8945 STARTING MOTOR GP-ELECTRIC
AN ATTACHMENT

i05380714 SEBP3816

4428945 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	9Y-6089	[1]	GASKET
2.	176-2543	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)

#SEBP38161242

442-8947: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

442-8947 STARTING MOTOR GP-ELECTRIC
DUAL 24 VOLT, 42 MOUNT STARTER CONFIGURATION
FOR USE WITH FLYWHEEL HOUSINGS
AN ATTACHMENT

i05371218 SEBP3816

4428947 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-6089	[1]	GASKET
2.	9F-4337	[1]	WIRE AS
3.	435-1239 Y	[1]	STARTING MOTOR GP-ELECTRIC
4.	176-2543	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP38161243

442-8948: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

442-8948 STARTING MOTOR GP-ELECTRIC
24VOLT, LH STARTER
AN ATTACHMENT

i05380725 SEBP3816

4428948 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-6089	[1]	GASKET
2.	9F-4337	[1]	WIRE AS
3.	435-1240 Y	[1]	STARTING MOTOR GP-ELECTRIC
4.	176-2543	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP38161244

442-8949: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

442-8949 STARTING MOTOR GP-ELECTRIC
DUAL 24 VOLT, 42 MOUNT STARTER CONFIGURATION
FOR USE WITH FLYWHEEL HOUSINGS
AN ATTACHMENT

i05371220 SEBP3816

4428949 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-6089	[1]	GASKET
2.	9F-4337	[1]	WIRE AS
3.	176-2543	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
4.	8T-4896	[1]	WASHER-HARD (10.2X18.5X2.5-MM THK)
5.	4M-0061	[1]	BOLT (5/16-18X0.75-IN)
6.	440-3361 Y	[1]	STARTING MOTOR GP-ELECTRIC
	Y		SEPARATE ILLUSTRATION

#SEBP38161245

442-8950: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

442-8950 STARTING MOTOR GP-ELECTRIC
DUAL 24 VOLT, 42 MOUNT STARTER CONFIGURATION
CANNOT BE USED WITH SINGLE STARTER FLYWHEEL HOUSINGS
AN ATTACHMENT

i05371222 SEBP3816

4428950 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9Y-6089	[2]	GASKET
2.	435-1239 Y	[1]	STARTING MOTOR GP-ELECTRIC
3.	176-2543	[6]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
	R		REMANUFACTURED PART MAY BE AVAILABLE
	Y		SEPARATE ILLUSTRATION

#SEBP38161246

5N-2685: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

5N-2685 STARTING MOTOR GP-ELECTRIC
S/N WJH1-UP
24-VOLT. FOR USE ON RH SIDE OF ENGINE, SOLENOID MOUNTED UP
CANNOT BE USED WITH TRANSMISSION OIL COOLER
AN ATTACHMENT

i00384726 SEBP3816

5N2685 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6V-0885 CY	[1]	STARTING MOTOR GP-ELECTRIC (24-VOLT)
2.	8S-2332	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
	4D-3704	[3]	WASHER-HARD (17X30X5-MM THK)
3.	4N-1059	[3]	GASKET
4.	9F-4337	[1]	WIRE AS
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP38161247

5N-2685: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

5N-2685 STARTING MOTOR GP-ELECTRIC
24-VOLT. FOR USE ON RH SIDE OF ENGINE, SOLENOID MOUNTED UP
CANNOT BE USED WITH TRANSMISSION OIL COOLER
AN ATTACHMENT

i04511135 SEBP3816

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	352-9767 CY	[1]	STARTING MOTOR GP-ELECTRIC (24-VOLT)
2.	176-2543 C	[3]	BOLT-12 POINT HEAD (5/8-11X1.75-IN)
3.	9Y-6089	[3]	GASKET
4.	9F-4337	[1]	WIRE AS
5.	4D-3704	[3]	WASHER-HARD (17X30X5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP38161248

6V-0885: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

6V-0885 STARTING MOTOR GP-ELECTRIC
S/N WJH1-UP
24-VOLT
PART OF 5N-2685 STARTING MOTOR GP-ELECTRIC
FIELD REPLACEMENT ORDER @@@@@352-9767@@@@@, @@@@@ 6V-0890@@@@@, @@@@@338-3454@@@@@
AN ATTACHMENT

i02092947 SEBP3816

6V0885 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
7A.	3T-3424	[1]	PLUG-FELT
7B.	3T-3423	[1]	CUP
7C.	9G-4101	[1]	BUSHING-END
8.	3T-9525	[1]	PLATE AS-BRUSH (STARTING MOTOR)
8A.	9F-5599	[12]	LOCKWASHER
8B.	6T-0371	[1]	INSULATOR
8C.	6T-0363	[6]	HOLDER AS-BRUSH (STARTING MOTOR)
			(EACH INCLUDES)
8D.	3T-9494	[1]	SPRING (STARTING MOTOR BRUSH)
8E.	3T-4709	[3]	PLATE
8F.	3T-4710	[3]	PLATE
8G.	2L-6679	[3]	PLATE-INSULATOR
8H.	7F-3525	[6]	WASHER-SPECIAL (0.207X0.39X0.09-IN THK)
8J.	6T-0372	[1]	PLATE
8K.	5P-6298	[12]	SCREW-MACHINE (10-32X0.5-IN)
9.	1T-0808	[2]	WASHER (0.516X0.812X0.09-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	3T-3434 B	[6]	PLUG
14.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
15.	3L-3380	[1]	BUSHING-TERMINAL
16.	036-9821	[1]	WASHER
17.	4M-1828	[1]	RETAINER-SPRING
18.	306-3998	[1]	BOOT-RUBBER
19.	4M-1827	[1]	RETAINER-SPRING
20.	9M-7609	[1]	SPRING (SHIFT LEVER)
21.	8C-3089	[1]	SEAL-O-RING
22.	4M-1853	[1]	LEVER AS-SHIFT
23.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
24.	7L-2894	[4]	GASKET
25.	4M-1831	[4]	PLUG-LEVER HOUSING
26.	4M-1854	[1]	SHAFT-LEVER
27.	1H-1023	[1]	SEAL-O-RING
28.	2D-6392	[1]	SEAL-O-RING
29.	7T-3974	[1]	HOUSING AS-DRIVE
30.	6N-3826	[1]	DRIVE AS-MOTOR
31.	2H-3429	[2]	RING-RETAINING
32.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
33.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
34.	6N-3279	[1]	INSULATOR
35.	0S-1597	[13]	BOLT (1/4-28X1-IN)
36.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
37.	1H-2629	[3]	STRIP-INSULATION
38.	7M-0324	[1]	COIL AS-FIELD
39.	3R-8797	[12]	SCREW & WASHER AS (3/8-24X0.72-IN)
40.	7F-3488	[6]	SHOE-POLE
41.	7M-8651	[1]	ARMATURE AS
42.	7M-0325	[1]	INSULATOR
43.	3T-9524	[6]	BRUSH AS
44.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES BUSHINGS & WASHERS)
45.	125-6535	[1]	COVER-STARTING MOTOR
46.	3R-8801	[1]	CLAMP
47.	8F-1434	[2]	LOCKWASHER
48.	6V-8188	[6]	NUT (1/2-13-THD)
49.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
50.	4B-2049	[6]	NUT (10-32-THD)
51.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
52.	3T-9494	[6]	SPRING (STARTING MOTOR BRUSH)
53.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
55.	3T-3424	[2]	PLUG-FELT
56.	3T-3423	[2]	CUP
57.	1M-9968	[1]	BUSHING
58.	2F-6678	[1]	SEAL-LIP TYPE
59.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
60.	4M-1896	[1]	BUSHING-TERMINAL
61.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
63.	7T-9123	[1]	GASKET-PLATE
64.	125-6536	[1]	TERMINAL AS
65.	338-3453 C	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

#SEBP38161249

6V-0890: STARTING MOTOR GP-ELECTRIC

STARTING MOTOR GP-ELECTRIC

6V-0890 STARTING MOTOR GP-ELECTRIC
S/N WJH1-UP
24-VOLT
FIELD REPLACEMENT ORDER @@@@@237-1962@@@@@
FIELD REPLACEMENT FOR @@@@@ 6V-0885@@@@@

i02039547 SEBP3816

6V0890 STARTING MOTOR GP-ELECTRIC Parts scheme

For full view, you need register

Parts for your C18 INDUSTRIAL ENGINE:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7M-0326	[1]	CONNECTOR
2.	9H-3757	[2]	WASHER (0.516X1X0.094-IN THK)
3.	1S-7446	[3]	SCREW-MACHINE (8-32X0.437-IN)
4.	8C-9660	[3]	WASHER (4.6X7.9X0.8-MM THK)
5.	9S-2544	[9]	SCREW-HEX HEAD (8-32X11.13-MM)
6.	7M-0327	[1]	WASHER-THRUST (17.4X25.4X1.6-MM THK)
7.	3T-3418	[1]	FRAME AS-END
	3T-3423	[1]	CUP
	9G-4101	[1]	BUSHING-END
	3T-3424	[1]	PLUG-FELT
8.	3T-9525	[1]	PLATE AS-BRUSH (STARTING MOTOR)
8A.	6T-0371	[1]	INSULATOR
8B.	5P-6298	[12]	SCREW-MACHINE (10-32X0.5-IN)
	9F-5599	[12]	LOCKWASHER
8C.	7F-3525	[6]	WASHER-SPECIAL (0.207X0.39X0.09-IN THK)
8D.	6T-0372	[1]	PLATE
8E.	3T-4709	[3]	PLATE
8F.	2L-6679	[3]	PLATE-INSULATOR
8G.	3T-4710	[3]	PLATE
8H.	6T-0363	[6]	HOLDER AS-BRUSH
			(EACH INCLUDES)
8J.	3T-9494	[1]	SPRING (STARTING MOTOR)
9.	7F-3491	[2]	WASHER (0.516X1X0.094-IN THK)
10.	3T-3422	[1]	WIRE AS
11.	2J-8163	[2]	SEAL-O-RING
12.	7X-3373	[1]	BOLT (5/16-18X0.88-IN)
13.	3T-3434 B	[6]	PLUG
14.	5J-5314	[5]	BOLT (5/16-18X1.5-IN)
15.	3L-3380	[1]	BUSHING-TERMINAL
16.	036-9821	[1]	WASHER
17.	4M-1828	[1]	RETAINER-SPRING
18.	4M-1829	[1]	BOOT-RUBBER
20.	9M-7609	[1]	SPRING (SHIFT LEVER)
21.	4M-1827	[1]	RETAINER-SPRING
22.	8C-3089	[1]	SEAL-O-RING
23.	4M-1853	[1]	LEVER AS-SHIFT
24.	5M-3034	[1]	LOCKNUT (5/16-24-THD)
25.	7L-2894	[4]	GASKET
26.	4M-1831	[4]	PLUG-LEVER HOUSING
27.	4M-1854	[1]	SHAFT-LEVER
28.	1H-1023	[1]	SEAL-O-RING
29.	2D-6392	[1]	SEAL-O-RING
30.	7T-3974	[1]	HOUSING AS-DRIVE
31.	6N-3826	[1]	DRIVE AS-MOTOR
32.	2H-3429	[2]	RING-RETAINING (EXTERNAL)
33.	6V-1322	[4]	BOLT (1/4-20X0.375-IN)
34.	8T-4205	[4]	WASHER-HARD (7.2X14.5X2-MM THK)
35.	6N-3279	[1]	INSULATOR
36.	036-9823	[13]	BOLT (1/4-28X1-IN)
37.	1M-9971	[1]	SPACER (0.835X1.72X0.188-IN THK)
38.	1H-2629	[3]	STRIP-INSULATION
39.	7M-0324	[1]	COIL AS-FIELD
40.	3F-0379	[12]	SCREW-POLE SHOE (3/8-24-THD)
41.	7F-3488	[6]	SHOE-POLE
42.	7M-8651	[1]	ARMATURE AS
43.	7M-0325	[1]	INSULATOR
44.	3T-9524	[6]	BRUSH AS
45.	3N-3763	[1]	KIT-TERMINAL (STARTING MOTOR)
			(INCLUDES INSULATOR, BUSHINGS & WASHER)
46.	125-6537	[1]	INSULATOR
47.	3R-8801	[1]	CLAMP
48.	8F-1434	[2]	LOCKWASHER
49.	6V-8188	[6]	NUT (1/2-13-THD)
50.	7X-0562	[6]	WASHER-HARD (13.5X19X0.8-MM THK)
51.	4B-2049	[6]	NUT (10-32-THD)
52.	8T-0328	[10]	WASHER-HARD (5.5X10X1-MM THK)
53.	3T-9494	[6]	SPRING (STARTING MOTOR)
54.	3E-7771	[1]	HOUSING AS (STARTING MOTOR)
55.	9G-4101	[1]	BUSHING-END
56.	3T-3424	[3]	PLUG-FELT
57.	3T-3423	[3]	CUP
58.	1M-9968	[1]	BUSHING
59.	2F-6678	[1]	SEAL-LIP TYPE
60.	4L-2729	[1]	WASHER (0.844X1.9X0.188-IN THK)
61.	4M-1896	[1]	BUSHING-TERMINAL
62.	045-4065	[4]	SCREW-MACHINE (10-32X0.75-IN)
67.	125-6535	[1]	COVER-STARTING MOTOR
68.	7T-9123	[1]	GASKET-PLATE
69.	125-6536	[1]	TERMINAL AS
70.	238-1851 C	[1]	SOLENOID AS-STARTING MOTOR (24-VOLT)
	3R-8801	[1]	CLAMP (BOOT)
	B		USE AS REQUIRED
	C		CHANGE FROM PREVIOUS TYPE

Information:

ELECTRICAL AND STARTING SYSTEM

STARTING MOTOR GP

Engine News

A New Air Motor Lubricator Gp Is Used and A New Fitting Is Available for Service on Certain Engines {1451, 1451}
2010/11/05

A New Seal Improves Starter Durability on Certain Industrial Engines {1453, 7555}
2013/07/25

Cat® Reman Has Added Alternators and Starting Motor Groups for Certain Engines and Generator Set Engines {1405, 1453}
2014/08/08

Operation and Maintenance Manual

Starting Motor - Inspect
C18 Industrial Engines

Cold Weather Starting
C18 Industrial Engines

Starting the Engine
C18 Industrial Engines

Special Instruction

Caterpillar PRELUB® Diagnostics{1469}
Caterpillar PRELUB^® Diagnostics{1469}

Installation of New Shift Lever Assembly for All Starter Motors {1453}
Installation of New Shift Lever Assembly for All Starter Motors {1453}

Procedure to Install the Insulator on to Series Starters on All Engines {1453}
Procedure to Install the Insulator on to Series Starters on All Engines {1453}

Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}
Installation of Repair Kit-Solenoid Plunger Assembly on All Engines {1453}

Procedure to Install Terminal Kit on All Engines {1453}
Procedure to Install Terminal Kit on All Engines {1453}

Procedure to Install Brush Holder Assembly in All Engines {1453}
Procedure to Install Brush Holder Assembly in All Engines {1453}

Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat^® Products {1408, 1450, 1453}

Procedure to Replace Drive Assembly of Starter Motor On All Cat® Products {1453}
Procedure to Replace Drive Assembly of Starter Motor On All Cat^® Products {1453}

Technical Information Bulletin

Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}
Photo Request Instructions for Identifying and Repairing 50MT Starter Motor Problems{1453}

Specifications

Electric Starting Motor
C15 and C18 Industrial Engines

Information Release Memo

CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS
CAT REMAN ANNOUNCES AN ADDITIONAL AIR STARTER AND ADDITIONAL ALTERNATORS FOR CERTAIN ENGINE MODELS

Testing and Adjusting

Electric Starting System - Test
C15 and C18 Industrial Engines

Pinion Clearance - Adjust
C15 and C18 Industrial Engines

Disassembly and Assembly

Electric Starting Motor - Remove and Install
C15 and C18 Industrial Engines

Caterpillar Parts SIS Catalog C18 :

435-1240 STARTING MOTOR GP-ELECTRIC

435-1239 STARTING MOTOR GP-ELECTRIC

362-3292 STARTING MOTOR GP-ELECTRIC

357-7354 STARTING MOTOR GP-ELECTRIC

352-9767 STARTING MOTOR GP-ELECTRIC

352-9765 STARTING MOTOR GP-ELECTRIC

338-3454 STARTING MOTOR GP-ELECTRIC

273-1682 STARTING MOTOR GP-ELECTRIC

442-8945 STARTING MOTOR GP-ELECTRIC

442-8947 STARTING MOTOR GP-ELECTRIC

442-8948 STARTING MOTOR GP-ELECTRIC

442-8949 STARTING MOTOR GP-ELECTRIC

442-8950 STARTING MOTOR GP-ELECTRIC

5N-2685 STARTING MOTOR GP-ELECTRIC

6V-0885 STARTING MOTOR GP-ELECTRIC

Truck sale:

89,000 USD

Caterpillar C18, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC

34,700

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

34,800

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

32,850

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates

36,800

Caterpillar C18, Construction
- mobile generator sets
MOHAMED ABDULRAHMAN AL-BAHAR
United Arab Emirates