ELECTRICAL AND STARTING SYSTEM
LIGHTING GPCONTROL GP-ELECTRONIC
CIRCUIT BREAKER GP
ELECTRICAL AND STARTING SYSTEM
LIGHTING GP
#SEBP38450310
235-5276: LIGHTING GP-FLOOD & SIGNAL
235-5276 LIGHTING GP-FLOOD & SIGNAL -FRONT, REAR
S/N N1A1-UP
PART OF 235-5279, 244-3599 LIGHTING AR-SIGNAL
S/N N1A1-UP
PART OF 235-5279, 244-3599 LIGHTING AR-SIGNAL
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-6466 Y | [2] | LAMP GP-SIGNAL (24-VOLT) | |
| 2. | 111-4013 | [2] | GROMMET | |
| 3. | 145-6929 Y | [2] | LAMP GP-STOP & TAIL (24-VOLT) | |
| 4. | 219-6485 Y | [2] | LAMP GP-FLOOD (24-VOLT) | |
| 5. | 246-3295 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-4935 M | [1] | BOSS-WELD (M10X1.5X45-MM) | ||
| 6. | 261-4405 | [1] | BRACKET AS (RH) | |
| 7. | 261-4406 | [1] | BRACKET AS (LH) | |
| 8. | 261-4884 | [2] | COVER | |
| 9. | 130-5300 | [6] | CLIP | |
| 10. | 5C-2890 M | [6] | NUT (M6X1-THD) | |
| 11. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 12. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 13. | 8T-4137 M | [4] | BOLT (M10X1.5X20-MM) | |
| 14. | 8T-4138 M | [8] | BOLT (M6X1X20-MM) | |
| 15. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 16. | 9X-2044 M | [8] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 17. | 9X-8256 | [6] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450311
248-0414: LIGHTING GP-ROADING
248-0414 LIGHTING GP-ROADING
S/N N1A1-3228
PART OF 254-5525, 260-7765 LIGHTING AR-ROADING
S/N N1A1-3228
PART OF 254-5525, 260-7765 LIGHTING AR-ROADING
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 105-4849 Y | [1] | LAMP GP-HEAD & SIGNAL (LH) | |
| 2. | 105-4850 Y | [1] | LAMP GP-HEAD & SIGNAL (RH) | |
| 3. | 111-4013 | [2] | GROMMET | |
| 4. | 145-6929 Y | [2] | LAMP GP-STOP & TAIL (24-VOLT) | |
| 5. | 246-3295 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-4935 M | [1] | BOSS-WELD (M10X1.5X45-MM) | ||
| 6. | 260-9984 | [1] | BRACKET AS (RH) | |
| 7. | 260-9985 | [1] | BRACKET AS (LH) | |
| 8. | 130-5300 | [4] | CLIP | |
| 9. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 11. | 9X-2044 M | [8] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 12. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450312
248-0414: LIGHTING GP-ROADING
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 117-9409 | [2] | GROMMET | |
| 2. | 145-6929 Y | [2] | LAMP GP-STOP & TAIL (24-VOLT) | |
| 3. | 246-3295 | [2] | PLATE AS | |
| (EACH INCLUDES) | ||||
| 8T-4935 M | [1] | BOSS-WELD (M10X1.5X45-MM) | ||
| 4. | 344-3456 CY | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT)(LH) | |
| 5. | 344-3455 CY | [1] | LAMP GP-HEAD & SIGNAL (24-VOLT)(RH) | |
| 6. | 313-9312 C | [1] | BRACKET AS (RH) | |
| 7. | 314-2532 C | [1] | BRACKET AS (LH) | |
| 8. | 130-5300 | [4] | CLIP | |
| 9. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 10. | 8T-4136 M | [8] | BOLT (M10X1.5X25-MM) | |
| 11. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 12. | 9X-2044 M | [8] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450313
237-1012: LIGHTING GP-WARNING BEACON
237-1012 LIGHTING GP-WARNING BEACON
S/N N1A1-3102
PART OF 328-9882 CONFIGURATION AR, 250-0706, 289-7456 CONVERSION AR-ROADING, 328-9883 OPTION AR-LIGHTING, 269-0671 SPECIAL AR-QUARRY
S/N N1A1-3102
PART OF 328-9882 CONFIGURATION AR, 250-0706, 289-7456 CONVERSION AR-ROADING, 328-9883 OPTION AR-LIGHTING, 269-0671 SPECIAL AR-QUARRY
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 9T-8556 | [1] | SPRING | |
| 3. | 235-3937 Y | [1] | LAMP GP-WARNING BEACON (24-VOLT, AMBER, ROTATING) | |
| 4. | 236-7775 | [1] | HARNESS AS-LIGHTING (WARNING BEACON) | |
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS & WEDGE) | ||||
| 5. | 237-7262 | [1] | PLATE AS | |
| 6. | 237-9736 | [1] | SWITCH AS-ROCKER (WARNING BEACON) | |
| 7. | 255-4370 | [1] | BRACKET | |
| 8. | 255-4371 | [1] | BRACKET | |
| 9. | 4Y-8003 | [2] | U-BOLT | |
| 10. | 129-3180 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 11. | 130-5300 | [1] | CLIP | |
| 12. | 318-2605 | [1] | PIN-SPRING | |
| 13. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 15. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 16. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8M-2770 | [1] | CLIP (LOOP) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450314
237-1012: LIGHTING GP-WARNING BEACON
237-1012 LIGHTING GP-WARNING BEACON
S/N N1A3103-UP
PART OF 328-9882 CONFIGURATION AR, 250-0706, 289-7456 CONVERSION AR-ROADING, 328-9883 OPTION AR-LIGHTING, 269-0671 SPECIAL AR-QUARRY
S/N N1A3103-UP
PART OF 328-9882 CONFIGURATION AR, 250-0706, 289-7456 CONVERSION AR-ROADING, 328-9883 OPTION AR-LIGHTING, 269-0671 SPECIAL AR-QUARRY
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [5] | STRAP-CABLE | |
| 2. | 9T-8556 | [1] | SPRING | |
| 3. | 284-3757 CY | [1] | LAMP GP-WARNING BEACON (AMBER, STROBE) | |
| 4. | 236-7775 | [1] | HARNESS AS-LIGHTING (WARNING BEACON) | |
| 9W-0844 | [2] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8076 | [2] | TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 5. | 237-7262 | [1] | PLATE AS | |
| 6. | 237-9736 | [1] | SWITCH AS-ROCKER (WARNING BEACON) | |
| 7. | 255-4370 | [1] | BRACKET | |
| 8. | 255-4371 | [1] | BRACKET | |
| 9. | 4Y-8003 | [2] | U-BOLT | |
| 10. | 129-3180 M | [1] | LOCKNUT (M12X1.75-THD) | |
| 11. | 130-5300 | [1] | CLIP | |
| 12. | 318-2605 | [1] | PIN-SPRING | |
| 13. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4122 | [1] | WASHER-HARD (17X32X3.5-MM THK) | |
| 15. | 8T-4133 M | [4] | NUT (M10X1.5-THD) | |
| 16. | 8T-4137 M | [8] | BOLT (M10X1.5X20-MM) | |
| 17. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 18. | 8M-2770 | [1] | CLIP (LOOP) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450315
265-5044: LIGHTING GP-WARNING BEACON
265-5044 LIGHTING GP-WARNING BEACON -GREEN
S/N N1A1-UP
PART OF 265-5046 LIGHTING GP-WARNING BEACON
S/N N1A1-UP
PART OF 265-5046 LIGHTING GP-WARNING BEACON
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 260-0955 | [1] | LAMP AS-WARNING (SEAT BELT) | |
| 2. | 263-1230 | [1] | HARNESS AS-LIGHTING (WARNING BEACON) | |
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 265-5039 Y | [1] | SUPPORT GP-WARNING BEACON | |
| 4. | 130-5300 | [1] | CLIP | |
| 5. | 5C-2890 M | [3] | NUT (M6X1-THD) | |
| 6. | 6V-5834 | [4] | SCREW-HEAD (10-14X0.75-IN) | |
| 7. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 9. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 10. | 8T-4971 M | [3] | BOLT (M6X1X30-MM) | |
| 11. | 9X-8256 | [3] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450316
265-5046: LIGHTING GP-WARNING BEACON
265-5046 LIGHTING GP-WARNING BEACON
S/N N1A1-UP
PART OF 269-0671 SPECIAL AR-QUARRY
S/N N1A1-UP
PART OF 269-0671 SPECIAL AR-QUARRY
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS#SEBP38450317
550-1515: MOUNTING GP-ELECTRONIC CONTROL
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 552-3021 | [1] | BRACKET | ||
| 552-3022 | [1] | BRACKET AS | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8C-5607 | [8] | MOUNT-ISOLATION | ||
| 5P-7970 M | [4] | NUT (M8X1.25-THD) | ||
| 344-5673 M | [8] | NUT (M6X1-THD) | ||
| 8T-8737 | [6] | PLUG-SEAL | ||
| 133-0970 | [1] | RECEPTACLE AS-CONNECTOR (TEE) | ||
| 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | ||
| 446-1483 M | [4] | SCREW-TRUSS HEAD (M6X1X45-MM) | ||
| 8C-5608 | [4] | SPACER (6.5X9.5X25.4-MM THK) | ||
| 115-8109 | [7] | SPLICE-WIRE | ||
| 135-5417 | [4] | STUD | ||
| 225-7947 | [4] | WASHER | ||
| 5P-4115 | [16] | WASHER-HARD (7.2X19X2-MM THK) | ||
| M | METRIC PART | |||
#SEBP38450318
291-8387: PANEL GP-CIRCUIT BREAKER
291-8387 PANEL GP-CIRCUIT BREAKER
S/N N1A1-3109
PART OF 241-0642 WIRING GP-CHASSIS
S/N N1A1-3109
PART OF 241-0642 WIRING GP-CHASSIS
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 7K-1181 | [8] | STRAP-CABLE | |
| 3. | 8T-2893 | [1] | LOCK GP-CYLINDER | |
| 226-0291 J | [1] | LOCK AS | ||
| 226-0321 | [1] | CAM | ||
| 4. | 131-0359 | [1] | PLATE-IDENTIFICATION (ENGINE STOP, RUN) | |
| 5. | 149-2612 | [1] | RELAY AS (24-VOLT) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 6. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 7. | 246-4488 | [1] | BAR-BUS | |
| 8. | 246-4489 | [1] | WIRE AS | |
| 9. | 247-4506 | [1] | HARNESS AS-CHASSIS (MAIN) | |
| 10. | 248-1545 | [1] | FILM-IDENTIFICATION (FUSE PANEL) | |
| 11. | 271-3952 | [1] | BAR-BUS | |
| 12. | 275-4024 | [1] | PANEL AS | |
| 3R-9322 | [1] | HINGE | ||
| 6V-9632 M | [7] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [5] | LINK | ||
| 8T-6462 M | [1] | BOSS-WELD (M10X1.5X25-MM) | ||
| 13. | 275-9916 | [1] | BAR-BUS | |
| 14. | 132-5789 | [2] | CLIP (LADDER) | |
| 15. | 171-2206 | [1] | CIRCUIT BREAKER AS (50-AMPERE)(START) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 16. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(MAIN) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 17. | 171-2211 | [1] | CIRCUIT BREAKER AS (90-AMPERE)(AIR INLET HEATER) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 18. | 171-2212 | [1] | CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 19. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 20. | 301-2979 | [1] | SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN) | |
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 21. | 3E-0075 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 22. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 23. | 5L-4507 | [8] | SCREW-MACHINE (10-32X0.875-IN) | |
| 24. | 5M-6668 | [6] | SCREW-MACHINE (8-32X0.75-IN) | |
| 25. | 6N-9349 | [1] | CIRCUIT BREAKER AS (30-AMPERE)(HOOD TILT ACTUATOR) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 26. | 6T-3644 | [1] | CIRCUIT BREAKER AS (20-AMPERE)(UNSWITCHED BAT POWER TO CAB) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 27. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 28. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 29. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 30. | 8T-4205 | [8] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 31. | 8T-4970 M | [5] | BOLT (M6X1X14-MM) | |
| 32. | 7X-7877 E | STRIP-EDGE (17-CM EACH) | ||
| 33. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 34. | 131-3201 | [1] | BOOT | |
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38450319
291-8387: PANEL GP-CIRCUIT BREAKER
291-8387 PANEL GP-CIRCUIT BREAKER
S/N N1A3110-3212
PART OF 241-0642 WIRING GP-CHASSIS
S/N N1A3110-3212
PART OF 241-0642 WIRING GP-CHASSIS
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-0075 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 2. | 3E-5169 | [1] | GUARD-SWITCH | |
| 3. | 7K-1181 C | [9] | STRAP-CABLE | |
| 4. | 8T-2893 | [1] | LOCK GP-CYLINDER | |
| 226-0291 J | [1] | LOCK AS | ||
| 226-0321 | [1] | CAM | ||
| 5. | 131-0359 | [1] | PLATE-IDENTIFICATION (ENGINE STOP, RUN) | |
| 6. | 131-3201 | [1] | BOOT | |
| 7. | 149-2612 | [1] | RELAY AS (24-VOLT) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8. | 158-0591 C | [1] | LOCKWASHER | |
| 9. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 11. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 12. | 246-4489 | [1] | WIRE AS | |
| 13. | 247-4506 | [1] | HARNESS AS-CHASSIS (MAIN) | |
| 14. | 248-1545 | [1] | FILM-IDENTIFICATION (FUSE PANEL) | |
| 15. | 301-2979 | [1] | SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN) | |
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 16. | 315-5389 CM | [1] | NUT (M32X1.5-THD) | |
| 17. | 316-8501 C | [1] | HARNESS AS-SWITCH | |
| 18. | 316-8502 C | [1] | BAR-BUS | |
| 19. | 316-8503 C | [1] | BAR-BUS | |
| 20. | 316-8504 C | [1] | BAR-BUS | |
| 21. | 321-2964 C | [1] | GROMMET AS | |
| 22. | 321-3357 C | [1] | PANEL AS | |
| 6V-9632 M | [8] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [4] | LINK | ||
| 8T-6462 M | [1] | BOSS-WELD (M10X1.5X25-MM) | ||
| 23. | 321-3359 C | [1] | PLATE | |
| 24. | 132-5789 | [2] | CLIP (LADDER) | |
| 25. | 149-2147 C | [8] | WASHER (7.2X14.5X2-MM THK) | |
| 26. | 171-2206 | [1] | CIRCUIT BREAKER AS (50-AMPERE)(START) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 27. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(MAIN) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 28. | 171-2211 | [1] | CIRCUIT BREAKER AS (90-AMPERE)(AIR INLET HEATER) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 29. | 171-2212 | [1] | CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 30. | 313-3280 C | [2] | NUT (M6X1-THD) | |
| 31. | 3F-9556 C | [2] | LOCKWASHER | |
| 32. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 33. | 4B-4274 C | [8] | WASHER (5.5X13X1.2-MM THK) | |
| 34. | 4B-4863 C | [6] | WASHER (4.7X11X1.2-MM THK) | |
| 35. | 5P-4115 C | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 36. | 6N-9349 | [1] | CIRCUIT BREAKER AS (30-AMPERE)(HOOD TILT ACTUATOR) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 37. | 6T-3644 | [1] | CIRCUIT BREAKER AS (20-AMPERE)(UNSWITCHED BAT POWER TO CAB) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 38. | 7U-4891 C | [8] | SCREW (10-32X1-IN) | |
| 39. | 7U-4892 C | [6] | SCREW (8-32X0.75-IN) | |
| 40. | 8T-0122 C | [8] | NUT-FULL (1/4-28-THD) | |
| 41. | 8T-0193 C | [2] | NUT-FULL (5/16-24-THD) | |
| 42. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 43. | 8T-4138 CM | [3] | BOLT (M6X1X20-MM) | |
| 44. | 8T-4181 CM | [2] | BOLT (M6X1X20-MM) | |
| 45. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 46. | 8T-4205 C | [7] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 47. | 8T-4970 CM | [3] | BOLT (M6X1X14-MM) | |
| 48. | 9K-0700 C | [1] | GROMMET | |
| 49. | 209-8315 CE | SEAL (129-CM) | ||
| 49A. | 209-8315 CE | SEAL (13-CM) | ||
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
