241-0642 WIRING GP-CHASSIS S/N N1A1-2761 PART OF 237-0235 ELECTRICAL AR 950H WHEEL LOADER

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 241-0642 WIRING GP-
1. 241-0642 WIRING GP-
2. 306-5349 WIRING GP-
3. 324-0692 WIRING GP-
4. 324-0692 WIRING GP-
5. 244-6524 WIRING GP-
6. 244-6524 WIRING GP-
7. 244-6524 WIRING GP-
8. 198-2714 WIRING GP-
9. 241-0640 WIRING GP-
0. INFORMATION

WHEEL LOADER 950H WHEEL LOADER N1A
950H Wheel Loader N1A00001-UP (MACHINE) POWERED BY C7 Engine SEBP3845 950H N1A (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

306-5348 WIRING GP-CAB

241-0642 WIRING GP-CHASSIS

306-5349 WIRING GP-CHASSIS

324-0692 WIRING GP-CHASSIS

#SEBP38450420

241-0642: WIRING GP-CHASSIS

WIRING GP-CHASSIS

241-0642 WIRING GP-CHASSIS
S/N N1A1-2761
PART OF 237-0235 ELECTRICAL AR

i02704555 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181 C	[32]	STRAP-CABLE
2.	118-6365 C	[1]	PLATE AS
	6V-6716	[2]	RIVET-TRUSS HEAD
	109-1645	[1]	CLIP
3.	130-9811	[1]	SENSOR GP-TEMPERATURE (HYDRAULIC OIL)
4.	174-4312	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
	5P-6008 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
	8T-5677 D		SLEEVE (0.6-M)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
5.	178-3620	[1]	STRAP-DUAL CLAMP
6.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
7.	216-7166	[1]	PLATE AS
	6V-2716	[2]	LATCH AS
	109-1645	[1]	CLIP
8.	298-3649	[1]	HARNESS AS-CHASSIS
9.	259-1107	[1]	SWITCH AS-TOGGLE (HOOD TILT ACTUATOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	112-4550		SLEEVE (21-CM)
	3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
10.	289-3038	[1]	GROMMET
11.	291-8387 CY	[1]	PANEL GP-CIRCUIT BREAKER
12.	033-8248	[4]	CLIP (LOOP)
13.	0L-1407 C	[1]	GROMMET
14.	130-5300	[8]	CLIP
15.	139-1398	[1]	CLIP (LOOP)
16.	3E-6769	[1]	SEAL-O-RING
17.	3E-6909	[1]	CLIP (LOOP)
18.	3J-1907	[1]	SEAL-O-RING
19.	4D-7794 C	[1]	CLIP
20.	4P-8134 C	[1]	CLIP (LADDER)
21.	6D-3479 C	[1]	CLIP (LOOP)
22.	7C-4354 C	[2]	CLIP
23.	7D-7233	[5]	CLIP (LOOP)
24.	8M-2773	[1]	CLIP (LOOP)
25.	8S-7583	[1]	GROMMET
26.	8T-4121 C	[23]	WASHER-HARD (11X21X2.5-MM THK)
27.	8T-4133 CM	[8]	NUT (M10X1.5-THD)
28.	8T-4137 M	[11]	BOLT (M10X1.5X20-MM)
29.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	8T-4244 M	[1]	NUT (M12X1.75-THD)
31.	8T-5436 M	[4]	BOLT (M10X1.5X130-MM)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP38450421

241-0642: WIRING GP-CHASSIS

WIRING GP-CHASSIS

241-0642 WIRING GP-CHASSIS
S/N N1A2762-3212
PART OF 237-0235 ELECTRICAL AR

i03313315 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[32]	STRAP-CABLE
2.	118-6365	[1]	PLATE AS
	6V-6716	[2]	RIVET-TRUSS HEAD
	109-1645	[1]	CLIP
3.	264-4297 C	[1]	SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL)
	137-6645	[1]	PAD-CONNECTOR (CONNECTOR)
4.	327-4608 C	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE
5.	178-3620	[1]	STRAP-DUAL CLAMP
6.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
7.	216-7166	[1]	PLATE AS
	6V-2716	[2]	LATCH AS
	109-1645	[1]	CLIP
8.	298-3649	[1]	HARNESS AS-CHASSIS
9.	301-2980 C	[1]	SWITCH AS-TOGGLE (HOOD TILT ACTUATOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
10.	289-3038	[1]	GROMMET
11.	291-8387 Y	[1]	PANEL GP-CIRCUIT BREAKER
12.	033-8248	[4]	CLIP (LOOP)
13.	0L-1407	[1]	GROMMET
14.	130-5300	[8]	CLIP
15.	139-1398	[1]	CLIP (LOOP)
16.	3E-6769	[1]	SEAL-O-RING
17.	3E-6909	[1]	CLIP (LOOP)
18.	3J-1907	[1]	SEAL-O-RING
19.	4D-7794	[1]	CLIP
20.	4P-8134	[1]	CLIP (LADDER)
21.	6D-3479	[1]	CLIP (LOOP)
22.	7C-4354	[2]	CLIP
23.	7D-7233	[5]	CLIP (LOOP)
24.	8M-2773	[1]	CLIP (LOOP)
25.	8S-7583	[1]	GROMMET
26.	8T-4121	[23]	WASHER-HARD (11X21X2.5-MM THK)
27.	8T-4133 M	[8]	NUT (M10X1.5-THD)
28.	8T-4137 M	[11]	BOLT (M10X1.5X20-MM)
29.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
30.	8T-4244 M	[1]	NUT (M12X1.75-THD)
31.	8T-5436 M	[4]	BOLT (M10X1.5X130-MM)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP38450422

306-5349: WIRING GP-CHASSIS

WIRING GP-CHASSIS

306-5349 WIRING GP-CHASSIS -VARIABLE PITCH FAN
S/N N1A1-UP
PART OF 305-5294, 346-8806 CONTROL AR-FAN

i03185181 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181 B	[25]	STRAP-CABLE
2.	306-5352	[1]	HARNESS AS-CHASSIS (VARIABLE PITCH FAN)
	B		USE AS REQUIRED

#SEBP38450423

324-0692: WIRING GP-CHASSIS

WIRING GP-CHASSIS

324-0692 WIRING GP-CHASSIS
S/N N1A3213-4391
PART OF 237-0235 ELECTRICAL AR

i03650080 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[13]	STRAP-CABLE
2.	7K-1181	[33]	STRAP-CABLE
3.	118-6365	[1]	PLATE AS
4.	154-6626	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
5.	188-6252	[1]	FILM-INSTRUCTION (HOOD TILT)
6.	193-3973	[23]	STRAP-CABLE
7.	264-4297	[1]	SENSOR AS-TEMPERATURE (2-PIN)(REAR AXLE OIL)
	137-6645	[1]	PAD-CONNECTOR (CONNECTOR)
8.	324-0688 Y	[1]	PANEL GP-CIRCUIT BREAKER
9.	324-0689	[1]	BRACKET
10.	324-0691	[1]	HARNESS AS-CHASSIS
	8T-8737	[3]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (20-CM)
	E		SLEEVE-PLASTIC (20-CM)
	114-8845 E		SLEEVE-PLASTIC (80-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	126-1766	[20]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11.	324-0703 Y	[1]	FASTENER GP-WIRING HARNESS (TRANSMISSION)
12.	327-4608	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	9X-1813 E		SLEEVE (28-CM)
13.	033-8248	[4]	CLIP (LOOP)
14.	130-5300	[8]	CLIP
15.	132-5789	[2]	CLIP (LADDER)
16.	204-8000	[15]	MOUNTING-CABLE TIE
17.	301-2980	[1]	SWITCH AS-TOGGLE (HOOD TILT ACTUATOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
18.	3E-6769	[1]	SEAL-O-RING
19.	3J-1907	[1]	SEAL-O-RING
20.	3P-3839	[1]	GROMMET
21.	4P-7581	[4]	CLIP (LADDER)
22.	7D-7233	[6]	CLIP (LOOP)
23.	8S-7583	[1]	GROMMET
24.	8T-4121	[33]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4133 M	[6]	NUT (M10X1.5-THD)
26.	8T-4136 M	[19]	BOLT (M10X1.5X25-MM)
27.	8T-4137 M	[6]	BOLT (M10X1.5X20-MM)
28.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
29.	8T-4195 M	[2]	BOLT (M10X1.5X30-MM)
30.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
31.	8T-4244 M	[1]	NUT (M12X1.75-THD)
32.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
33.	124-3019	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP38450424

324-0692: WIRING GP-CHASSIS

WIRING GP-CHASSIS

324-0692 WIRING GP-CHASSIS
S/N N1A4392-UP
PART OF 237-0235 ELECTRICAL AR

i04250121 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093 C	[1]	STRAP-CABLE
2.	7K-1181	[43]	STRAP-CABLE
3.	118-6365	[1]	PLATE AS
4.	154-6626	[1]	BRACKET AS
5.	116-8247 C	[1]	PLATE-INSTRUCTION (HOOD TILT)
6.	193-3973	[23]	STRAP-CABLE
7.	264-4297	[1]	SENSOR AS-TEMPERATURE (2-PIN)(REAR AXLE OIL)
	137-6645	[1]	PAD-CONNECTOR (CONNECTOR)
8.	324-0688 Y	[1]	PANEL GP-CIRCUIT BREAKER
9.	324-0689	[1]	BRACKET
10.	324-0691	[1]	HARNESS AS-CHASSIS
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[4]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	8T-8737	[3]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (20-CM)
	114-8845 E		SLEEVE-PLASTIC (80-CM)
	9X-3402	[20]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[20]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
11.	324-0703 Y	[1]	FASTENER GP-WIRING HARNESS (TRANSMISSION)
12.	327-4608	[1]	SWITCH AS-PRESSURE (PARKING BRAKE OIL)
	8T-8729	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
	9X-1813 E		SLEEVE (28-CM)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
13.	033-8248	[4]	CLIP (LOOP)
14.	130-5300	[8]	CLIP
15.	132-5789	[2]	CLIP (LADDER)
16.	204-8000	[15]	MOUNTING-CABLE TIE
17.	301-2980	[1]	SWITCH AS-TOGGLE (HOOD TILT ACTUATOR)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8729	[3]	PIN-CONNECTOR (16-GA TO 18-GA)
18.	3E-6769	[1]	SEAL-O-RING
19.	3J-1907	[1]	SEAL-O-RING
20.	3P-3839	[1]	GROMMET
21.	4P-7581	[4]	CLIP (LADDER)
22.	7D-7233 C	[4]	CLIP (LOOP)
23.	8S-7583	[1]	GROMMET
24.	8T-4121 C	[32]	WASHER-HARD (11X21X2.5-MM THK)
25.	8T-4133 CM	[7]	NUT (M10X1.5-THD)
26.	8T-4136 CM	[18]	BOLT (M10X1.5X25-MM)
27.	8T-4137 CM	[6]	BOLT (M10X1.5X20-MM)
28.	8T-4138 M	[2]	BOLT (M6X1X20-MM)
29.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
30.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
31.	8T-4244 M	[1]	NUT (M12X1.75-THD)
32.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
33.	124-3019	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
34.	139-1398 C	[2]	CLIP (LOOP)
35.	4H-1225	[1]	WASHER (11X22X6-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP38450425

244-6524: WIRING GP-ELECTRIC CLUTCH

WIRING GP-ELECTRIC CLUTCH

244-6524 WIRING GP-ELECTRIC CLUTCH -AXLE OIL COOLER PUMP
S/N N1A1-2691
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL

i02240013 SEBP3845

2446524 WIRING GP-ELECTRIC CLUTCH Parts scheme

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3E-5239	[1]	RELAY AS (24-VOLT)(AXLE OIL COOLER)
2.	7K-1181	[1]	STRAP-CABLE
3.	191-7699	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
4.	130-5300	[1]	CLIP
5.	147-0385	[1]	CLIP
6.	3E-9854 M	[1]	BOLT (M8X1.25X20-MM)
7.	8T-4121	[1]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
9.	8T-4224	[1]	WASHER-HARD (8.8X16X2-MM THK)
	M		METRIC PART

#SEBP38450426

244-6524: WIRING GP-ELECTRIC CLUTCH

WIRING GP-ELECTRIC CLUTCH

244-6524 WIRING GP-ELECTRIC CLUTCH -AXLE OIL COOLER PUMP
S/N N1A2692-UP
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL
Type 1

i03345860 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	3E-5239	[1]	RELAY AS (24-VOLT)(AXLE OIL COOLER)
2.	147-0385	[1]	CLIP

#SEBP38450427

244-6524: WIRING GP-ELECTRIC CLUTCH

WIRING GP-ELECTRIC CLUTCH

244-6524 WIRING GP-ELECTRIC CLUTCH -AXLE OIL COOLER PUMP
S/N N1A2692-UP
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL
Type 2

i03822270 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	335-2608 CY	[1]	RELAY GP (AXLE OIL COOLER)
2.	147-0385	[1]	CLIP
	C		CHANGE FROM PREVIOUS TYPE
	Y		SEPARATE ILLUSTRATION

#SEBP38450428

198-2714: WIRING GP-ENGINE

WIRING GP-ENGINE

198-2714 WIRING GP-ENGINE
S/N C7C1-UP
PART OF 235-1422 ENGINE AR-COMPLETE

i02242002 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[12]	STRAP-CABLE
2.	4P-5918	[1]	CLIP
4.	198-2713	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL MODULE)
	305-5362	[4]	TERMINAL AS (18-GA)
	180-9340	[60]	SOCKET-CONNECTOR (14-GA TO 18-GA)
	9X-3401	[15]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[15]	PIN-CONNECTOR (14-GA TO 16-GA)
	8T-8737	[77]	PLUG-SEAL
	119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
	125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
	264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
	211-6807	[1]	COVER-CONNECTOR
	155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, & WEDGE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
	100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
5.	206-1345	[9]	STRAP-CABLE
6.	222-5917	[1]	HARNESS AS-ENGINE (FUEL INJECTION)
	6N-7523	[1]	WASHER (6.48X11.9X1.57-MM THK)
	135-5975	[1]	GROMMET-WIRING
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS & WEDGE)
7.	4P-8134	[1]	CLIP (LADDER)
8.	6V-2317 M	[1]	BOLT (M8X1.25X30-MM)
9.	9M-1974	[1]	WASHER-HARD (8.8X16X2-MM THK)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP38450429

241-0640: WIRING GP-ENGINE

WIRING GP-ENGINE

241-0640 WIRING GP-ENGINE
S/N N1A1-2345
PART OF 237-0235 ELECTRICAL AR

i02246915 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[15]	STRAP-CABLE
2.	118-6878	[1]	BRACKET AS
3.	124-3019	[2]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
4.	145-7028 Y	[1]	SENSOR GP-TEMPERATURE (TORQUE CONVERTER OIL)
5.	164-3652	[1]	ADAPTER
6.	175-3244	[1]	SWITCH AS-PRESSURE (SERVICE BRAKE OIL)
	186-3735	[3]	PIN-CONNECTOR (16-GA TO 18-GA)(0.2-M)
	5P-6008 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M)
	8T-5677 D		SLEEVE (0.6-M)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
7.	315-0629	[1]	HARNESS AS-ENGINE
8.	247-4389	[1]	CABLE AS
	3L-6513	[2]	TERMINAL-RING (1-GA TO 2-GA, 1/2-IN SCREW)
	8C-0596 E		CABLE (2-GA)(70-CM)
	6V-9023 E		TUBE-HEAT SHRINK (12.7-MM DIA)(6-CM)
	030-1712	[1]	TERMINAL-RING (2-GA, 1/4-IN SCREW)
9.	130-5300	[5]	CLIP
10.	132-5789	[3]	CLIP (LADDER)
11.	142-8545 M	[2]	BOLT (M16X2X20-MM)
12.	149-9129	[5]	CLIP (LOOP)
13.	194-6722 Y	[1]	SENSOR GP-PRESSURE (TURBOCHARGER INLET)
14.	3J-1907	[2]	SEAL-O-RING
15.	3K-0360	[1]	SEAL-O-RING
16.	4N-9170	[2]	CLIP (LOOP)
17.	4P-7582	[3]	CLIP (LADDER)
18.	5C-7261 M	[1]	NUT (M8X1.25-THD)
19.	6V-1889	[2]	CLIP (LOOP)
20.	6V-3265	[1]	CLIP
21.	7J-0204	[1]	SEAL-O-RING
22.	8T-4121	[6]	WASHER-HARD (11X21X2.5-MM THK)
23.	8T-4133 M	[2]	NUT (M10X1.5-THD)
24.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
25.	8T-4189 M	[3]	BOLT (M8X1.25X20-MM)
26.	8T-4200 M	[1]	BOLT (M8X1.25X16-MM)
27.	8T-4224	[7]	WASHER-HARD (8.8X16X2-MM THK)
28.	9X-8250	[1]	CLIP (LOOP)
29.	9X-8257	[2]	WASHER (17.5X30X3.5-MM THK)
30.	134-2540	[1]	RECEPTACLE AS-CONNECTOR (3-PIN)
31.	8T-4137 M	[2]	BOLT (M10X1.5X20-MM)
32.	5P-7970 M	[2]	NUT (M8X1.25-THD)
33.	4P-7581	[1]	CLIP (LADDER)
34.	3S-2093	[1]	STRAP-CABLE
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Tool Operating Manual

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Reuse And Salvage Guidelines

Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}

Troubleshooting

CID 0100 FMI 04 Engine Oil Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0110 FMI 04 Engine Coolant Temperature short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0164 FMI 03 Injector Actuation Pressure voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0091 FMI 02 Incorrect Throttle Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0164 FMI 04 Injector Actuation Pressure voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0100 FMI 10 Engine Oil Pressure Sensor abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 1785 FMI 03 Intake Manifold Pressure Sensor voltage high
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 1785 FMI 04 Intake Manifold Pressure Sensor voltage low
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0342 FMI 08 Secondary Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Air Inlet Heater Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0274 FMI 04 Atmospheric Pressure short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 1785 FMI 10 Intake Manifold Pressure Signal abnormal rate of change
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Electrical Connectors - Inspect
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0190 FMI 08 Engine Speed signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Fuel Filter Differential Pressure Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0091 FMI 08 Throttle Position signal abnormal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Sensors and Electrical Connectors
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Engine Pressure Sensor Open or Short Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Indicator Lamp Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0324 FMI 06 Warning Lamp short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 0324 FMI 05 Warning Lamp open/short to ground
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 1266 FMI 05 Diagnostic Lamp current below normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

CID 1266 FMI 06 Diagnostic Lamp current above normal
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Digital Sensor Supply Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Coolant Level Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Engine Shutdown Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Throttle Position Sensor Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Throttle Switch Circuit - Test
C7 Engine for the AP-755 Asphalt Paver and the PM-102 Cold Planer

Caterpillar Parts SIS Catalog 950H :

241-0642 WIRING GP-CHASSIS

306-5348 WIRING GP-CAB

289-9768 WIRING GP-CAB

280-4118 WIRING GP-CAB

264-1135 WIRING GP-CAB

241-0642 WIRING GP-CHASSIS

306-5349 WIRING GP-CHASSIS

324-0692 WIRING GP-CHASSIS

244-6524 WIRING GP-ELECTRIC CLUTCH

198-2714 WIRING GP-ENGINE

Truck sale:

Caterpillar 950H
- Wheel Loaders
BERGERAT MONNOYEUR S.A.S.

70,000

Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
GREGORY POOLE EQUIPMENT CO.

50,000

Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.

99,500

Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
HOLT CAT

60,000

Caterpillar 950H, Wheel Loaders, Construction
- Wheel Loaders
FINNING CHILE S.A.