435-1332 ACCUMULATOR GP-RIDE CONTROL -UNCHARGED S/N N1A4911-UP PART OF 291-1180 CONTROL GP-RIDE 950H

Pos.	Part No	Qty	Parts name
1.	5P-3779	[1]	TAG-NOTICE (SHIPPING INSTRUCTIONS)
2.	217-0162	[1]	CAP
3.	222-3785 M	[1]	SCREW-VENT (M8X1.5-THD)
4.	224-7262	[1]	SEAL-O-RING
5.	222-5765	[1]	SEAL-RING
6.	303-5977	[1]	FILM-INFORMATION (HYD ACCUMULATOR, READ OMM)
	M		METRIC PART

#SEBP38450761

305-5294: CONTROL AR-FAN

305-5294 CONTROL AR-FAN -VARIABLE PITCH FAN
S/N N1A1-UP

i03185180 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	225-4131	[2]	FILM-WARNING (FLYING DEBRIS, STAY BACK, INTL)
2.	306-5348 Y	[1]	WIRING GP-CAB (VARIABLE PITCH FAN)
3.	306-5349 Y	[1]	WIRING GP-CHASSIS (VARIABLE PITCH FAN)
4.	311-0054 Y	[1]	COOLING GP-SUPPLEMENTAL (VARIABLE PITCH FAN)
5.	311-0065 Y	[1]	LINES GP-HYDRAULIC FAN
6.	324-0304	[1]	PLATE AS-MOUNTING (VARIABLE PITCH FAN AIR PUMP)

	F		SOFTWARE-CONFIGURATION (VARIABLE PITCH FAN)
	F		NOT SHOWN
	Y		SEPARATE ILLUSTRATION

#SEBP38450762

330-0824: CONTROL AR-FAN

330-0824 CONTROL AR-FAN -VARIABLE PITCH FAN
S/N N1A1-UP
CUSTOM
Type 1

i07189827 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	224-1185 H	[2]	FILM-WARNING (FLYING DEBRIS, READ OMM)
2.	306-5348 HY	[1]	WIRING GP-CAB (VARIABLE PITCH FAN)
3.	324-0304 H	[1]	PLATE AS-MOUNTING (VARIABLE PITCH FAN AIR PUMP)
4.	7K-1181 J	[25]	STRAP-CABLE
5.	306-5352 J	[1]	HARNESS AS-CHASSIS (VARIABLE PITCH FAN)
6.	8T-1160 LM	[6]	BOLT-SOCKET HEAD (M10X1.5X50-MM)
7.	8T-4224 L	[6]	WASHER-HARD (8.8X16X2-MM THK)
8.	8T-4908 LM	[6]	BOLT (M8X1.25X25-MM)
9.	304-4016 L	[1]	SUPPORT AS
10.	324-7871 L	[1]	KIT-FAN BLADE
11.	336-8817 L	[1]	BAFFLE AS
12.	308-0167 L	[1]	GUARD AS-FAN
13.	308-1189 L	[1]	FLANGE
14.	1P-4278 N	[1]	CLAMP-HOSE
15.	2P-1279 N	[1]	LOCKNUT (9/16-18-THD)
16.	4J-5477 N	[1]	SEAL-O-RING
17.	5P-4295 N	[1]	CLIP
18.	6K-8178 N	[1]	CLIP (LOOP)
19.	6V-1889 N	[1]	CLIP (LOOP)
20.	7K-1181 N	[5]	STRAP-CABLE
21.	7X-5331 N	[1]	ELBOW
22.	8C-5064 EN		CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(30-CM EACH)
23.	8T-4121 N	[3]	WASHER-HARD (11X21X2.5-MM THK)
24.	8T-4137 NM	[1]	BOLT (M10X1.5X20-MM)
25.	8T-4195 NM	[3]	BOLT (M10X1.5X30-MM)
26.	8T-4197 NM	[3]	BOLT (M8X1.25X40-MM)
27.	8T-5005 NM	[1]	BOLT (M10X1.5X70-MM)
28.	9N-0869 N	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
29.	125-4124 N	[2]	CLAMP
30.	148-8368 N	[1]	ELBOW AS
	3J-1907 N	[1]	SEAL-O-RING
	4J-5477 N	[1]	SEAL-O-RING
	6V-8627 N	[1]	ELBOW
31.	148-8389 N	[1]	ELBOW AS
	4J-5477 N	[1]	SEAL-O-RING
	7X-0492 N	[1]	ELBOW
32.	150-4052 N	[1]	UNION AS
	4J-5477 N	[2]	SEAL-O-RING
	6V-8993 N	[1]	UNION
33.	302-3908 N	[1]	SPACER (11X20X30-MM THK)
34.	308-0168 N	[1]	TUBE AS
35.	308-0169 NI	[1]	HOSE AS
36.	319-2140 NI	[1]	HOSE AS
37.	323-3883 NI	[1]	HOSE AS
38.	324-7874 NI	[1]	HOSE AS
39.	325-8152 NI	[1]	HOSE AS
40.	0A-2926 O	[1]	FITTING
41.	102-8802 O	[2]	KIT-RECEPTACLE (2-PIN)
			(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
42.	8T-4121 O	[1]	WASHER-HARD (11X21X2.5-MM THK)
43.	8T-4137 OM	[1]	BOLT (M10X1.5X20-MM)
44.	186-3735 O	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
45.	8T-9658 O	[3]	SPACER (8.2X12.7X25.4-MM THK)
46.	9W-0852 O	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
47.	130-5300 O	[2]	CLIP
48.	155-0576 O	[6]	MOUNT-ISOLATION
49.	321-8167 O	[1]	BRACKET AS
50.	321-8168 O	[1]	BRACKET AS
51.	321-8191 O	[1]	PUMP AS-AIR (VARIABLE PITCH FAN)
52.	331-3257 O	[1]	VALVE AS
	E		ORDER BY THE CENTIMETER
	H		PART OF CONTROL AR-FAN
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		PART OF WIRING GP-CHASSIS
	L		PART OF COOLING GP-SUPPLEMENTAL
	M		METRIC PART
	N		PART OF LINES GP-HYDRAULIC FAN
	O		PART OF PUMP GP-AIR
	Y		SEPARATE ILLUSTRATION

#SEBP38450763

330-0824: CONTROL AR-FAN

330-0824 CONTROL AR-FAN -VARIABLE PITCH FAN
S/N N1A1-UP
CUSTOM
Type 2

i07189828 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	224-1185 H	[2]	FILM-WARNING (FLYING DEBRIS, READ OMM)
2.	306-5348 HY	[1]	WIRING GP-CAB (VARIABLE PITCH FAN)
3.	324-0304 H	[1]	PLATE AS-MOUNTING (VARIABLE PITCH FAN AIR PUMP)
		[1]	BLOCK
	330-3031	[1]	PLATE AS
4.	7K-1181 J	[25]	STRAP-CABLE
5.	306-5352 J	[1]	HARNESS AS-CHASSIS (VARIABLE PITCH FAN)
	9X-3401 J	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767 J	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270 J	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	102-8802 J	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	114-8843 EJ		SLEEVE-PLASTIC (80-CM)
	9X-3402 J	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768 J	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8054 J	[1]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
			-OR-
	2L-8061 J	[1]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
	125-7874 EJ		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
6.	8T-1160 LM	[6]	BOLT-SOCKET HEAD (M10X1.5X50-MM)
7.	8T-4224 L	[6]	WASHER-HARD (8.8X16X2-MM THK)
8.	8T-4908 LM	[6]	BOLT (M8X1.25X25-MM)
9.	304-4016 L	[1]	SUPPORT AS
10.	324-7871 L	[1]	KIT-FAN BLADE
11.	336-8817 L	[1]	BAFFLE AS
12.	308-0167 L	[1]	GUARD AS-FAN
13.	308-1189 L	[1]	FLANGE
14.	1P-4278 N	[1]	CLAMP-HOSE
15.	2P-1279 N	[1]	LOCKNUT (9/16-18-THD)
16.	4J-5477 N	[1]	SEAL-O-RING
17.	5P-4295 N	[1]	CLIP
18.	6K-8178 N	[1]	CLIP (LOOP)
19.	6V-1889 N	[1]	CLIP (LOOP)
20.	7K-1181 CN	[7]	STRAP-CABLE
21.	7X-5331 N	[1]	ELBOW
22.	8C-5064 CEN		CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(28-CM)
22A.	8C-5064 CEN		CONDUIT-FLEXIBLE (17.75-MM ID, SPLIT)(22-CM)
23.	8T-4121 CN	[2]	WASHER-HARD (11X21X2.5-MM THK)
24.	8T-4137 NM	[1]	BOLT (M10X1.5X20-MM)
25.	8T-4195 CNM	[1]	BOLT (M10X1.5X30-MM)
26.	8T-4197 NM	[3]	BOLT (M8X1.25X40-MM)
27.	8T-5005 NM	[1]	BOLT (M10X1.5X70-MM)
28.	9N-0869 N	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
29.	5P-8440 CN	[1]	GROMMET
30.	148-8368 N	[1]	ELBOW AS
	3J-1907 N	[1]	SEAL-O-RING
	4J-5477 N	[1]	SEAL-O-RING
	6V-8627 N	[1]	ELBOW
31.	148-8389 N	[1]	ELBOW AS
	4J-5477 N	[1]	SEAL-O-RING
	7X-0492 N	[1]	ELBOW
32.	8M-2770 C	[2]	CLIP (LOOP)
33.	302-3908 N	[1]	SPACER (11X20X30-MM THK)
34.	308-0168 N	[1]	TUBE AS
35.	308-0169 NI	[1]	HOSE AS
36.	319-2140 NI	[1]	HOSE AS
37.	323-3883 NI	[1]	HOSE AS
38.	324-7874 NI	[1]	HOSE AS
39.	325-8152 NI	[1]	HOSE AS
40.	311-3170 CPY	[1]	PUMP GP-AIR (VARIABLE PITCH FAN)
41.	296-5749 CP	[1]	ELBOW AS
	6V-8986 P	[1]	ELBOW
	4J-5477 P	[2]	SEAL-O-RING
42.	3E-5239 CP	[1]	RELAY AS (24-VOLT)(VARIABLE PITCH FAN)
43.	262-9949 CPY	[1]	SWITCH GP-ROCKER (VARIABLE PITCH FAN)
44.	306-5350 CP	[1]	HARNESS AS-CAB (VARIABLE PITCH FAN)
	114-8843 EP		SLEEVE-PLASTIC (40-CM)
	126-1767 P	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401 P	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737 P	[1]	PLUG-SEAL
	9W-2032 P	[1]	TERMINAL-BLADE (10-GA TO 12-GA)
	9X-1054 P	[1]	PLUG AS-CONNECTOR (4-PIN)
	100-5041 P	[4]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
45.	5C-9553 CPM	[1]	BOLT (M6X1X16-MM)
46.	7K-1181 CP	[8]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	H		PART OF CONTROL AR-FAN
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		FOR WIRING GP-CHASSIS
	L		PART OF COOLING GP-SUPPLEMENTAL
	M		METRIC PART
	N		PART OF LINES GP-HYDRAULIC FAN
	P		FOR WIRING GP-CAB
	Y		SEPARATE ILLUSTRATION

#SEBP38450764

330-0824: CONTROL AR-FAN

330-0824 CONTROL AR-FAN -VARIABLE PITCH FAN
S/N N1A1-UP
CUSTOM
Type 3

i07189829 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	225-4131 CH	[2]	FILM-WARNING (FLYING DEBRIS, STAY BACK, INTL)
2.	306-5348 HY	[1]	WIRING GP-CAB (VARIABLE PITCH FAN)
3.	324-0304 H	[1]	PLATE AS-MOUNTING (VARIABLE PITCH FAN AIR PUMP)
4.	7K-1181 CJ	[24]	STRAP-CABLE
5.	306-5352 J	[1]	HARNESS AS-CHASSIS (VARIABLE PITCH FAN)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	114-8843		SLEEVE-PLASTIC (80-CM)
	125-7874		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
	9X-3402	[7]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[7]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	2L-8054	[1]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
			-OR-
	2L-8061	[1]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
	9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1767	[2]	PIN-CONNECTOR (14-GA TO 16-GA)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6.	8T-1160 LM	[6]	BOLT-SOCKET HEAD (M10X1.5X50-MM)
7.	8T-4224 L	[6]	WASHER-HARD (8.8X16X2-MM THK)
8.	8T-4908 LM	[6]	BOLT (M8X1.25X25-MM)
9.	304-4016 L	[1]	SUPPORT AS
10.	324-7871 L	[1]	KIT-FAN BLADE
11.	307-7318 CL	[1]	BAFFLE
12.	308-0167 L	[1]	GUARD AS-FAN
13.	308-1189 L	[1]	FLANGE
14.	141-6518 CN	[2]	SPACER (13.5X30X10-MM THK)
15.	165-6365 CN	[1]	FITTING AS
	3J-1907	[1]	SEAL-O-RING
	7W-7381	[1]	FITTING-OUTLET
16.	183-7258 CN	[1]	ELBOW AS (90-DEG)
	4J-5477	[1]	SEAL-O-RING
	7X-5331	[1]	ELBOW
17.	188-2461 CNY	[1]	VALVE GP-SOLENOID
18.	1M-4543 CN	[1]	GROMMET
19.	1P-4278 CN	[4]	CLAMP-HOSE
20.	308-0169 NI	[1]	HOSE AS
21.	319-2140 NI	[1]	HOSE AS
22.	324-7874 NI	[1]	HOSE AS
23.	357-4427 CN	[1]	ELBOW AS
	3J-1907	[1]	SEAL-O-RING
	4J-5477	[1]	SEAL-O-RING
	6V-8627	[1]	ELBOW
24.	365-8417 CN	[1]	HOSE AS
25.	377-9582 CN	[1]	ADAPTER-ELBOW
26.	385-8575 CNY	[1]	PUMP & MOUNTING GP-AIR
27.	386-6202 CN	[1]	ADAPTER-ELBOW
28.	386-6203 CN	[2]	ADAPTER-ELBOW
29.	387-9984 CN	[1]	PLATE AS
30.	388-0721 CN	[1]	COVER
31.	3S-2093 CN	[1]	STRAP-CABLE
32.	4B-4863 CN	[2]	WASHER (4.7X11X1.2-MM THK)
33.	4D-9517 CN	[1]	CLIP (SLOT)
34.	4H-6112 CN	[1]	BREATHER (AIR/HYDRAULIC CYLINDER)
35.	4K-8864 CN	[2]	CLIP (LOOP)(LOOP)
36.	5K-3294 CN	[1]	CLIP (SLOT)
37.	5P-1076 CN	[2]	WASHER-HARD (13.5X30X4-MM THK)
38.	5P-6442 CE		HOSE (156-CM)
39.	5P-8440 N	[1]	GROMMET
40.	6K-8178 N	[1]	CLIP (LOOP)(LOOP)
41.	6V-1889 CN	[2]	CLIP (LOOP)
42.	7C-4354 CN	[1]	CLIP
43.	7I-7439 CEN		GUARD-HOSE (119-CM)
44.	7K-1181 CN	[8]	STRAP-CABLE
45.	7X-7877 CEN		STRIP-EDGE (8-CM)
46.	8T-0337 CNM	[2]	SCREW-MACHINE (M4X0.7X12-MM)
47.	8T-4121 CN	[5]	WASHER-HARD (11X21X2.5-MM THK)
48.	8T-4133 CNM	[1]	NUT (M10X1.5-THD)
49.	8T-4136 CNM	[1]	BOLT (M10X1.5X25-MM)
50.	8T-4137 CNM	[3]	BOLT (M10X1.5X20-MM)
51.	8T-4194 CNM	[2]	BOLT (M12X1.75X50-MM)
52.	8T-4195 NM	[1]	BOLT (M10X1.5X30-MM)
53.	8T-4197 NM	[3]	BOLT (M8X1.25X40-MM)
54.	9M-8406 CN	[1]	CLIP (LOOP)
55.	9N-0869 N	[3]	WASHER-HARD (8.8X25.5X2-MM THK)
56.	9X-7381 CN	[2]	SEAL-O-RING
57.	3E-5239 P	[1]	RELAY AS (24-VOLT)(VARIABLE PITCH FAN)
58.	262-9949 PY	[1]	SWITCH GP-ROCKER (VARIABLE PITCH FAN)
59.	306-5350 P	[1]	HARNESS AS-CAB (VARIABLE PITCH FAN)
	114-8843 EP		SLEEVE-PLASTIC (40-CM)
	126-1767 P	[1]	PIN-CONNECTOR (14-GA TO 16-GA)
	9X-3401 P	[1]	PIN-CONNECTOR (16-GA TO 18-GA)
	8T-8737 P	[1]	PLUG-SEAL
	9W-2032 P	[1]	TERMINAL-BLADE (10-GA TO 12-GA)
	9X-1054 P	[1]	PLUG AS-CONNECTOR (4-PIN)
	100-5041 P	[4]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
60.	5C-9553 PM	[1]	BOLT (M6X1X16-MM)
61.	7K-1181 P	[8]	STRAP-CABLE
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	H		FROM CONTROL AR-FAN
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	J		FOR WIRING GP-CHASSIS
	L		PART OF COOLING GP-SUPPLEMENTAL
	M		METRIC PART
	N		PART OF STANDARD LINES-GP HYDRAULIC FAN
	P		PART OF STANDARD WIRING GP CAB
	Y		SEPARATE ILLUSTRATION

#SEBP38450765

346-8806: CONTROL AR-FAN

346-8806 CONTROL AR-FAN
S/N N1A1-UP

i07189875 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

Pos.	Part No	Qty	Parts name
1.	225-4131	[2]	FILM-WARNING (FLYING DEBRIS, STAY BACK, INTL)
2.	244-5427	[1]	CORE AS-HYDRAULIC OIL COOLER
3.	256-5310	[1]	CORE AS-RADIATOR
4.	306-5348 Y	[1]	WIRING GP-CAB (VARIABLE PITCH FAN)
5.	306-5349 Y	[1]	WIRING GP-CHASSIS (VARIABLE PITCH FAN)
6.	311-0054 Y	[1]	COOLING GP-SUPPLEMENTAL (VARIABLE PITCH FAN)
7.	311-0065 Y	[1]	LINES GP-HYDRAULIC FAN
8.	244-8839	[1]	CORE AS-CONDENSER (REFRIGERANT)

	F	[1]	SOFTWARE-CONFIGURATION (VARIABLE PITCH FAN)
	F		NOT SHOWN
	Y		SEPARATE ILLUSTRATION

#SEBP38450766

244-3375: CONTROL AR-HIGH LIFT

244-3375 CONTROL AR-HIGH LIFT -2-VALVE HYDRAULICS
S/N N1A1-UP

i03037043 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

Part No	Qty	Parts name
232-7635 Y	[1]	CONTROL GP-BUCKET (HIGH LIFT MACHINES)
237-4948 Y	[1]	COUNTERWEIGHT & MOUNTING GP
244-5548 Y	[1]	CYLINDER & SEAL GP-TILT (HIGH LIFT MACHINES)
275-0023 Y	[1]	WIRING GP-SENSOR (TILT POSITION)

208-3906	[1]	ARM AS-BAIL
		S/N N1A1-1857
353-5193	[1]	ARM-BAIL
		S/N N1A1858-UP

8T-0341 M	[1]	BOLT-SOCKET HEAD (M10X1.5X60-MM)
		S/N N1A1858-UP
168-6514	[1]	SPACER (10.74X17.14X50.8-MM THK)
		S/N N1A1858-UP
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP38450767

244-3396: CONTROL AR-HIGH LIFT

244-3396 CONTROL AR-HIGH LIFT -3-VALVE HYDRAULICS
S/N N1A1-UP

i03122264 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

Part No	Qty	Parts name
279-3561 Y	[1]	ARM GP-LIFT (HIGH LIFT MACHINES)
232-7635 Y	[1]	CONTROL GP-BUCKET (HIGH LIFT MACHINES)
237-4948 Y	[1]	COUNTERWEIGHT & MOUNTING GP
244-5548 Y	[1]	CYLINDER & SEAL GP-TILT (HIGH LIFT MACHINES)
275-0023 Y	[1]	WIRING GP-SENSOR (TILT POSITION)

208-3906	[1]	ARM AS-BAIL
		S/N N1A1-1988
275-0531	[1]	ARM-BAIL
		S/N N1A1989-UP
244-5575	[2]	TUBE AS
		S/N N1A1-1988
318-3824	[1]	TUBE AS
		S/N N1A1989-UP
318-3825	[1]	TUBE AS
		S/N N1A1989-UP
Y		SEPARATE ILLUSTRATION

#SEBP38450768

325-2745: CONTROL AR-HIGH LIFT

325-2745 CONTROL AR-HIGH LIFT -3-VALVE HYDRAULICS
S/N N1A1-UP

i03647259 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER:

Part No	Qty	Parts name
279-3561 Y	[1]	ARM GP-LIFT (HIGH LIFT MACHINES)
		S/N N1A1-3212
232-7635 Y	[1]	CONTROL GP-BUCKET (HIGH LIFT MACHINES)
		S/N N1A1-3212
334-0436 Y	[1]	CONTROL GP-BUCKET (HIGH LIFT MACHINES)
		S/N N1A3213-UP
237-4948 Y	[1]	COUNTERWEIGHT & MOUNTING GP
244-5548 Y	[1]	CYLINDER & SEAL GP-TILT (HIGH LIFT MACHINES)
325-2731 Y	[1]	LINES GP-FRONT (HIGH LIFT MACHINES)
275-0023 Y	[1]	WIRING GP-SENSOR (TILT POSITION)

8T-0341 M	[1]	BOLT-SOCKET HEAD (M10X1.5X60-MM)
335-5371	[1]	ARM-BAIL
		S/N N1A1-UP
353-5193	[1]	ARM-BAIL
		S/N N1A3213-UP
168-6514	[1]	SPACER (10.74X17.14X50.8-MM THK)
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP38450769

334-0443: CONTROL AR-HIGH LIFT

334-0443 CONTROL AR-HIGH LIFT -QUICK COUPLER
S/N N1A3213-UP
FOR USE WITH @@@@@334-0429@@@@@
CANNOT BE USED WITH @@@@@250-0337@@@@@, @@@@@276-5414@@@@@, @@@@@325-2745@@@@@, @@@@@340-4746@@@@@

i03857695 SEBP3845

For full view, you need register

Parts for your 950H WHEEL LOADER: