OPERATOR STATION
CONTROL GP-STEERINGCONTROL GP-TRANSMISSION
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-UNPROGRAMMEDOPERATOR STATION
CONTROL GP-JOYSTICKMONITOR GP
OPERATOR STATION
CONTROL GP-STEERING
#SEBP38461020
219-7619: CONTROL GP-STEERING
219-7619 CONTROL GP-STEERING -COMMAND CONTROL STEERING
S/N N4A1-UP
PART OF 243-1081 CAB AR-ENCLOSED ROPS
Type 1
S/N N4A1-UP
PART OF 243-1081 CAB AR-ENCLOSED ROPS
Type 1
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1A-2812 | [1] | WASHER (0.06-MM THK) | |
| 2. | 2S-2160 | [1] | RING-RETAINING | |
| 3. | 2V-7859 | [1] | BEARING | |
| 4. | 3S-2093 | [1] | STRAP-CABLE | |
| 5. | 6P-0593 | [2] | BEARING-ROLLER | |
| 6. | 105-3477 M | [1] | BOLT-SOCKET HEAD (M10X1.5X45-MM) | |
| 7. | 112-2014 | [1] | CLAMP | |
| 8. | 112-9716 | [1] | LEVER | |
| 9. | 114-5309 | [1] | COVER AS (RH) | |
| 10. | 114-5312 | [1] | COVER AS (LH) | |
| 11. | 115-2014 | [1] | SHAFT | |
| 12. | 117-6056 | [1] | HOUSING AS | |
| 13. | 118-8078 | [2] | CLIP | |
| 14. | 123-6713 | [1] | WEDGE | |
| 15. | 124-0065 | [1] | BLOCK | |
| 16. | 155-6526 | [1] | SLEEVE | |
| 17. | 156-0549 Y | [1] | STEERING COLUMN GP | |
| 18. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 19. | 218-0654 Y | [1] | STEERING WHEEL GP | |
| 20. | 4D-9517 | [1] | CLIP | |
| 21. | 6V-5683 M | [4] | BOLT (M6X1X16-MM) | |
| 22. | 7X-2619 M | [3] | BOLT (M6X1X10-MM) | |
| 23. | 8T-1159 M | [4] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 24. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 26. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 27. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 28. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38461021
219-7619: CONTROL GP-STEERING
219-7619 CONTROL GP-STEERING -COMMAND CONTROL STEERING
S/N N4A1-UP
PART OF 243-1081 CAB AR-ENCLOSED ROPS
Type 2
S/N N4A1-UP
PART OF 243-1081 CAB AR-ENCLOSED ROPS
Type 2
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 105-3477 M | [1] | BOLT-SOCKET HEAD (M10X1.5X45-MM) | |
| 3. | 112-2014 | [1] | CLAMP | |
| 4. | 112-9716 | [1] | LEVER | |
| 5. | 114-5309 | [1] | COVER AS (RH) | |
| 6. | 114-5312 | [1] | COVER AS (LH) | |
| 7. | 118-8078 | [2] | CLIP | |
| 8. | 123-6713 | [1] | WEDGE | |
| 9. | 124-0065 | [1] | BLOCK | |
| 10. | 155-6526 | [1] | SLEEVE | |
| 11. | 297-4928 CY | [1] | STEERING COLUMN GP | |
| 12. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 13. | 218-0654 Y | [1] | STEERING WHEEL GP | |
| 14. | 4D-9517 | [1] | CLIP | |
| 15. | 6V-5683 M | [4] | BOLT (M6X1X16-MM) | |
| 16. | 7X-2619 M | [3] | BOLT (M6X1X10-MM) | |
| 17. | 8T-1159 M | [4] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 18. | 8T-4121 | [10] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 20. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 21. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 22. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 23. | 6V-5219 M | [1] | BOLT (M8X1.25X40-MM) | |
| 24. | 8T-7963 M | [1] | LOCKNUT (M8X1.25-THD) | |
| 25. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 26. | 255-8545 | [2] | WASHER-RUBBER (21.5X55X2-MM THK) | |
| 27. | 297-4929 | [1] | ADAPTER AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38461022
121-9300: CONTROL GP-TRANSMISSION
121-9300 CONTROL GP-TRANSMISSION -HMU
S/N N4A1-500
PART OF 243-1080 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
S/N N4A1-500
PART OF 243-1080 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 201-0212 CY | [1] | CONTROL GP-TRANSMISSION | |
| 3. | 3S-2093 | [1] | STRAP-CABLE | |
| 4. | 4P-7581 | [1] | CLIP (LADDER) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38461023
121-9300: CONTROL GP-TRANSMISSION
121-9300 CONTROL GP-TRANSMISSION -HMU
S/N N4A501-UP
PART OF 243-1080 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
S/N N4A501-UP
PART OF 243-1080 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 299-5840 CY | [1] | CONTROL GP-TRANSMISSION | |
| 3. | 3S-2093 | [1] | STRAP-CABLE | |
| 4. | 4P-7581 | [1] | CLIP (LADDER) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38461024
201-0212: CONTROL GP-TRANSMISSION
201-0212 CONTROL GP-TRANSMISSION -HMU
S/N N4A1-500
PART OF 121-9300 CONTROL GP-TRANSMISSION
S/N N4A1-500
PART OF 121-9300 CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 3E-5180 | [1] | WEDGE-RECEPTACLE LOCK (12-PIN) | |
| 3. | 186-3736 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 186-3735 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 5. | 101-9161 | [1] | WIRE AS | |
| 6. | 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | |
| (INCLUDES PLUG AS & WEDGE) | ||||
| 7. | 155-2262 | [1] | WEDGE-PLUG LOCK (4-PIN) | |
| 8. | 9G-3695 | [3] | PLUG-SEAL | |
#SEBP38461025
299-5840: CONTROL GP-TRANSMISSION
299-5840 CONTROL GP-TRANSMISSION -HMU
S/N N4A501-UP
PART OF 121-9300 CONTROL GP-TRANSMISSION
S/N N4A501-UP
PART OF 121-9300 CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-3695 | [2] | PLUG-SEAL | |
| 2. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 5. | 101-9161 | [1] | WIRE AS | |
| 6. | 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
#SEBP38461026
154-7443: CONTROL GP-UNPRGMED MONITOR
154-7443 CONTROL GP-UNPRGMED MONITOR -CATERPILLAR MONITORING SYSTEM
S/N N4A1-UP
PART OF 237-4910, 280-4118 WIRING GP-CAB, 262-9187 WIRING GP-OPEN ROPS
S/N N4A1-UP
PART OF 237-4910, 280-4118 WIRING GP-CAB, 262-9187 WIRING GP-OPEN ROPS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 252-4501 | [1] | CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP38461027
290-3533: CONVERSION GP-JOYSTICK
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 6V-3987 | [1] | SEAL (0.1-M EACH) | |
| 3. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 4. | 7K-1181 | [4] | STRAP-CABLE | |
| 5. | 8R-3695 | [3] | GROMMET | |
| 6. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 7. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 8. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 9. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 10. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 11. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 12. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 13. | 156-6175 | [1] | CLIP (LADDER) | |
| 14. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 15. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 16. | 245-6447 | [1] | CUSHION AS | |
| 17. | 245-7650 Y | [1] | CONTROL GP-JOYSTICK (2-FUNCTION, WITH DOWNSHIFT) | |
| 18. | 311-8345 C | [1] | HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC, JOYSTICK) | |
| 8T-8737 | [7] | PLUG-SEAL | ||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [3] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 174-0503 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH KIT PLUG INCLUDES PLUG AS & WEDGE) | ||||
| 19. | 247-4969 | [1] | PLATE | |
| 20. | 254-9149 | [1] | FILM-INFORMATION (JOYSTICK CONTROL) | |
| 21. | 262-5238 | [1] | COVER | |
| 22. | 262-5239 | [1] | HOUSING AS | |
| 23. | 263-1995 | [1] | PLATE AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38461028
290-3534: CONVERSION GP-JOYSTICK
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4E-8722 | [4] | NUT (RETAINER) | |
| 2. | 6V-3987 D | SEAL (0.06-M EACH) | ||
| 3. | 6R-7653 M | [2] | SCREW (M6X1X15-MM) | |
| 4. | 7K-1181 | [4] | STRAP-CABLE | |
| 5. | 8R-3695 | [3] | GROMMET | |
| 6. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 7. | 8T-4205 | [3] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 8. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 9. | 9X-2038 | [4] | WASHER (7X19X2-MM THK) | |
| 10. | 9X-2044 M | [9] | SCREW-TRUSS HEAD (M6X1X16-MM) | |
| 11. | 9X-2045 M | [4] | SCREW-TRUSS HEAD (M6X1X20-MM) | |
| 12. | 112-6646 M | [4] | LOCKNUT (M6X1-THD) | |
| 13. | 156-6175 | [1] | CLIP (LADDER) | |
| 14. | 189-2079 | [1] | FILM-INSTRUCTION (MAINTENANCE) | |
| 15. | 198-4775 | [1] | WASHER-HARD (6.6X15X6-MM THK) | |
| 16. | 245-6447 | [1] | CUSHION AS | |
| 17. | 245-7649 Y | [1] | CONTROL GP-JOYSTICK (3-FUNCTION, WITH DOWNSHIFT) | |
| 18. | 311-8345 C | [1] | HARNESS AS-OPERATOR CONTROLS (ELECTROHYDRAULIC, JOYSTICK) | |
| 155-2260 | [2] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 155-2264 | [1] | PLUG AS-CONNECTOR | ||
| 8T-8737 | [11] | PLUG-SEAL | ||
| 218-4935 | [1] | SUPPRESSOR-ARC | ||
| 19. | 247-4969 | [1] | PLATE | |
| 20. | 254-9150 | [1] | FILM-CONTROL | |
| 21. | 262-5238 | [1] | COVER | |
| 22. | 262-5239 | [1] | HOUSING AS | |
| 23. | 263-1995 | [1] | PLATE AS | |
| 24. | 256-7822 | [1] | SWITCH AS-ROCKER (24-VOLT)(3RD FUNCTION SELECT) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38461029
261-3226: DISPLAY GP-CAMERA
261-3226 DISPLAY GP-CAMERA -WORK AREA VISUAL SYSTEM
S/N N4A1142-UP
PART OF 281-8871 DISPLAY GP-CAMERA
S/N N4A1142-UP
PART OF 281-8871 DISPLAY GP-CAMERA
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 261-3222 | [1] | MOUNTING GP-DISPLAY (WORK AREA VISUAL SYSTEM) | |
| 259-4397 | [1] | CLAMP | ||
| 259-4399 | [2] | BASE | ||
| 2. | 261-3224 | [1] | MODULE GP-DISPLAY (WORK AREA VISUAL SYSTEM) | |
| 2A. | 280-2691 | [1] | CABLE AS | |
| 2B. | 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2C. | 8T-8729 | [5] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 2D. | 8T-8737 | [1] | PLUG-SEAL | |
| 3. | 4B-4274 | [4] | WASHER (5.5X13X1.2-MM THK) | |
| 4. | 8T-0288 M | [4] | BOLT (M5X0.8X12-MM) | |
| M | METRIC PART | |||
