AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

844H Wheel Tractor BTW00001-UP (MACHINE) POWERED BY C27 Engine BASIC ENGINE Caterpillar SIS



WHEEL DOZER 844H WHEEL DOZER BTW
 844H Wheel Tractor BTW00001-UP (MACHINE) POWERED BY C27 Engine SEBP3849 844H BTW   (2004)

Parts group 844H:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
MOUNTING GP-ALTERNATOR & COMPR
262-0898 MOUNTING GP-ALTERNATOR & COMPR
262-0898 MOUNTING GP-ALTERNATOR & COMPR
S/N BTW171-192; EHX1-UP
PART OF 217-5670, 271-8633 ENGINE AR-COMPLETE, 217-5671 INSTALLATION AR-ENGINE
MOUNTING GP-ALTERNATOR & COMPR
262-0898 MOUNTING GP-ALTERNATOR & COMPR
262-0898 MOUNTING GP-ALTERNATOR & COMPR
S/N BTW193-UP
PART OF 217-5671 INSTALLATION AR-ENGINE
CAMSHAFT GP
CAMSHAFT GP
223-6405 CAMSHAFT GP
223-6405 CAMSHAFT GP
S/N EHX1-2415
PART OF 231-3701 ENGINE AR-CORE
CAMSHAFT GP
260-9306 CAMSHAFT GP
260-9306 CAMSHAFT GP
S/N EHX2416-3730
PART OF 262-9144 ENGINE AR-CORE
CAMSHAFT GP
260-9306 CAMSHAFT GP
260-9306 CAMSHAFT GP
S/N EHX3731-UP
PART OF 262-9144, 350-5499 ENGINE AR-CORE
CRANKSHAFT GP
CRANKSHAFT GP
225-6052 CRANKSHAFT GP
225-6052 CRANKSHAFT GP
S/N EHX1-UP
PART OF 231-3701, 262-9144, 350-5499 ENGINE AR-CORE
SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT
319-0785 SEAL GP-CRANKSHAFT -REAR
S/N EHX2416-UP
PART OF 217-5685, 273-1642 HOUSING GP-FLYWHEEL
FOR USE WITH CCW ROTATION
SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT
319-7401 SEAL GP-CRANKSHAFT -FRONT
S/N EHX1-UP
PART OF 225-6052 CRANKSHAFT GP
FOR USE WITH CW ROTATION
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
224-3170 COVER GP-CYLINDER BLOCK
224-3170 COVER GP-CYLINDER BLOCK -FRONT STRUCTURE
S/N EHX1-UP
PART OF 217-5670 ENGINE AR-COMPLETE
COVER GP-CYLINDER BLOCK
226-7622 COVER GP-CYLINDER BLOCK
226-7622 COVER GP-CYLINDER BLOCK -REAR STRUCTURE
S/N EHX1-UP
PART OF 217-5670, 271-8633 ENGINE AR-COMPLETE
Type 1
COVER GP-CYLINDER BLOCK
226-7622 COVER GP-CYLINDER BLOCK
226-7622 COVER GP-CYLINDER BLOCK -REAR STRUCTURE
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
Type 2
COVER GP-CYLINDER BLOCK
238-6474 COVER GP-CYLINDER BLOCK
238-6474 COVER GP-CYLINDER BLOCK
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
COVER GP-CYLINDER BLOCK
273-1643 COVER GP-CYLINDER BLOCK
273-1643 COVER GP-CYLINDER BLOCK -FRONT STRUCTURE
S/N EHX1-UP
PART OF 271-8633 ENGINE AR-COMPLETE
Type 1
COVER GP-CYLINDER BLOCK
273-1643 COVER GP-CYLINDER BLOCK
273-1643 COVER GP-CYLINDER BLOCK -FRONT STRUCTURE
S/N EHX1-UP
PART OF 271-8633, 360-3755 ENGINE AR-COMPLETE
Type 2
CYLINDER BLOCK AS
230-7181 CYLINDER BLOCK AS
230-7181 CYLINDER BLOCK AS
S/N EHX1-UP
PART OF 230-7182 CYLINDER BLOCK AS
CYLINDER BLOCK AS
230-7182 CYLINDER BLOCK AS
230-7182 CYLINDER BLOCK AS
S/N EHX1-UP
PART OF 237-0842 CYLINDER BLOCK GP
CYLINDER BLOCK AS
348-9904 CYLINDER BLOCK AS
348-9904 CYLINDER BLOCK AS
S/N EHX5531-UP
PART OF 348-9905 CYLINDER BLOCK AS
CYLINDER BLOCK AS
348-9905 CYLINDER BLOCK AS
348-9905 CYLINDER BLOCK AS
S/N EHX5531-UP
PART OF 349-2528 CYLINDER BLOCK GP
CYLINDER BLOCK GP
237-0842 CYLINDER BLOCK GP
237-0842 CYLINDER BLOCK GP
S/N EHX1-5550
PART OF 231-3701, 262-9144 ENGINE AR-CORE
CYLINDER BLOCK GP
349-2528 CYLINDER BLOCK GP
349-2528 CYLINDER BLOCK GP
S/N EHX5531-UP
PART OF 350-5499 ENGINE AR-CORE
PLUG GP-CYLINDER BLOCK
280-4239 PLUG GP-CYLINDER BLOCK
280-4239 PLUG GP-CYLINDER BLOCK
S/N EHX1-5550
PART OF 217-5670, 271-8633 ENGINE AR-COMPLETE
PLUG GP-CYLINDER BLOCK
351-2234 PLUG GP-CYLINDER BLOCK
351-2234 PLUG GP-CYLINDER BLOCK
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
CYLINDER HEAD GP
CYLINDER HEAD AS
223-6432 CYLINDER HEAD AS
223-6432 CYLINDER HEAD AS
S/N EHX1-UP
PART OF 223-6431 CYLINDER HEAD GP
CYLINDER HEAD AS
284-2787 CYLINDER HEAD AS
284-2787 CYLINDER HEAD AS
S/N EHX4095-UP
PART OF 284-8892 CYLINDER HEAD GP
CYLINDER HEAD AS
357-7398 CYLINDER HEAD AS
357-7398 CYLINDER HEAD AS
S/N EHX2921-UP
PART OF 359-0936 CYLINDER HEAD GP
CYLINDER HEAD AS
396-8374 CYLINDER HEAD AS
396-8374 CYLINDER HEAD AS
S/N EHX6104-UP
PART OF 396-8375 CYLINDER HEAD GP
CYLINDER HEAD GP
223-6397 CYLINDER HEAD GP
223-6397 CYLINDER HEAD GP
S/N EHX1-2486
PART OF 231-3701, 262-9144 ENGINE AR-CORE
CYLINDER HEAD GP
223-6431 CYLINDER HEAD GP
223-6431 CYLINDER HEAD GP
S/N EHX1-UP
PART OF 223-6397, 279-7453 CYLINDER HEAD GP
CYLINDER HEAD GP
279-7453 CYLINDER HEAD GP
279-7453 CYLINDER HEAD GP
S/N EHX2487-2989
PART OF 262-9144 ENGINE AR-CORE
CYLINDER HEAD GP
284-8892 CYLINDER HEAD GP
284-8892 CYLINDER HEAD GP
S/N EHX5459-6103
PART OF 339-3585 CYLINDER HEAD GP
CYLINDER HEAD GP
284-8895 CYLINDER HEAD GP
284-8895 CYLINDER HEAD GP
S/N EHX2921-5458
PART OF 262-9144 ENGINE AR-CORE
CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
S/N EHX5459-6103
PART OF 262-9144, 350-5499 ENGINE AR-CORE
CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
S/N EHX6104-UP
PART OF 350-5499 ENGINE AR-CORE
Type 1
CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
339-3585 CYLINDER HEAD GP
S/N EHX6104-UP
PART OF 350-5499 ENGINE AR-CORE
Type 2
CYLINDER HEAD GP
359-0936 CYLINDER HEAD GP
359-0936 CYLINDER HEAD GP
S/N EHX2921-5458; EHX6104-UP
PART OF 284-8895, 339-3585 CYLINDER HEAD GP
CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
S/N EHX6104-UP
PART OF 339-3585 CYLINDER HEAD GP
Type 1
CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
396-8375 CYLINDER HEAD GP
S/N EHX6104-UP
PART OF 339-3585 CYLINDER HEAD GP
Type 2
PLUG GP-CYLINDER HEAD
223-6407 PLUG GP-CYLINDER HEAD
223-6407 PLUG GP-CYLINDER HEAD
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
DAMPER GP
DAMPER GP
234-1579 DAMPER GP
234-1579 DAMPER GP
S/N EHX1-UP
PART OF 235-0993 GEAR GP-FRONT
DAMPER GP
263-5259 DAMPER GP
263-5259 DAMPER GP
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
DAMPER GP
352-7936 DAMPER GP
352-7936 DAMPER GP
S/N EHX6775-UP
PART OF 355-2286 GEAR GP-FRONT
DAMPER GP
6N-2229 DAMPER GP
6N-2229 DAMPER GP
S/N EHX1-2415
PART OF 217-5670 ENGINE AR-COMPLETE
FLYWHEEL GP
FLYWHEEL GP
224-3167 FLYWHEEL GP
224-3167 FLYWHEEL GP
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
GEAR GP
GEAR GP-FRONT
235-0993 GEAR GP-FRONT
235-0993 GEAR GP-FRONT
S/N EHX1-3358
PART OF 231-3701, 262-9144 ENGINE AR-CORE
GEAR GP-FRONT
235-0993 GEAR GP-FRONT
235-0993 GEAR GP-FRONT
S/N EHX3359-6774
PART OF 262-9144, 350-5499 ENGINE AR-CORE
GEAR GP-FRONT
355-2286 GEAR GP-FRONT
355-2286 GEAR GP-FRONT
S/N EHX6775-UP
PART OF 350-5499 ENGINE AR-CORE
GEAR GP-REAR
217-5688 GEAR GP-REAR
217-5688 GEAR GP-REAR
S/N EHX1-2415
PART OF 217-5670 ENGINE AR-COMPLETE
GEAR GP-REAR
263-2941 GEAR GP-REAR
263-2941 GEAR GP-REAR
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
S/N EHX1-UP
PART OF 231-3701, 262-9144, 350-5499 ENGINE AR-CORE
HOUSING GP-FLYWHEEL
HOUSING GP-FLYWHEEL
217-5685 HOUSING GP-FLYWHEEL
217-5685 HOUSING GP-FLYWHEEL
S/N EHX1-UP
PART OF 217-5670 ENGINE AR-COMPLETE
HOUSING GP-FLYWHEEL
217-5685 HOUSING GP-FLYWHEEL
217-5685 HOUSING GP-FLYWHEEL
S/N EHX2416-UP
PART OF 217-5670 ENGINE AR-COMPLETE
HOUSING GP-FLYWHEEL
273-1642 HOUSING GP-FLYWHEEL
273-1642 HOUSING GP-FLYWHEEL
S/N EHX1-UP
PART OF 271-8633, 360-3755 ENGINE AR-COMPLETE
HOUSING GP-FRONT
GEAR GP-FRONT
235-0993 GEAR GP-FRONT
235-0993 GEAR GP-FRONT
S/N EHX1-3358
PART OF 231-3701, 262-9144 ENGINE AR-CORE
GEAR GP-FRONT
235-0993 GEAR GP-FRONT
235-0993 GEAR GP-FRONT
S/N EHX3359-6774
PART OF 262-9144, 350-5499 ENGINE AR-CORE
GEAR GP-FRONT
355-2286 GEAR GP-FRONT
355-2286 GEAR GP-FRONT
S/N EHX6775-UP
PART OF 350-5499 ENGINE AR-CORE
HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
238-9862 HOUSING GP-FRONT
S/N EHX1-UP
PART OF 231-3701, 262-9144, 350-5499 ENGINE AR-CORE
LIFTING GP-ENGINE
LIFTING GP-ENGINE
235-2014 LIFTING GP-ENGINE
235-2014 LIFTING GP-ENGINE
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
261-8342 MOUNTING GP-ALTERNATOR
261-8342 MOUNTING GP-ALTERNATOR
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
MOUNTING GP-ALTERNATOR & COMPR
262-0898 MOUNTING GP-ALTERNATOR & COMPR
262-0898 MOUNTING GP-ALTERNATOR & COMPR
S/N BTW171-192; EHX1-UP
PART OF 217-5670, 271-8633 ENGINE AR-COMPLETE, 217-5671 INSTALLATION AR-ENGINE
MOUNTING GP-ALTERNATOR & COMPR
262-0898 MOUNTING GP-ALTERNATOR & COMPR
262-0898 MOUNTING GP-ALTERNATOR & COMPR
S/N BTW193-UP
PART OF 217-5671 INSTALLATION AR-ENGINE
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
217-5672 SUPPORT GP-ENGINE
217-5672 SUPPORT GP-ENGINE
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
SUPPORT GP-ENGINE
7E-0644 SUPPORT GP-ENGINE
7E-0644 SUPPORT GP-ENGINE
S/N BTW1-UP
PART OF 217-5671 INSTALLATION AR-ENGINE
PAN GP-OIL
COVER GP-OIL PAN
188-4645 COVER GP-OIL PAN
188-4645 COVER GP-OIL PAN
S/N EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
PAN GP-OIL
241-1833 PAN GP-OIL
241-1833 PAN GP-OIL
S/N EHX1-2415
PART OF 217-5670 ENGINE AR-COMPLETE
PAN GP-OIL
273-1641 PAN GP-OIL
273-1641 PAN GP-OIL
S/N EHX1-UP
PART OF 271-8633, 360-3755 ENGINE AR-COMPLETE
PAN GP-OIL
280-7499 PAN GP-OIL
280-7499 PAN GP-OIL
S/N EHX2487-UP
PART OF 217-5670 ENGINE AR-COMPLETE
PISTON & ROD GP
PISTON & ROD GP
213-4836 PISTON & ROD GP
213-4836 PISTON & ROD GP
S/N EHX1-6327
27 LITER, 18:1 COMPRESSION RATIO
PART OF 231-3701, 262-9144, 350-5499 ENGINE AR-CORE
PISTON & ROD GP
213-4836 PISTON & ROD GP
213-4836 PISTON & ROD GP
S/N EHX6328-UP
27 LITER, 18:1 COMPRESSION RATIO
PART OF 350-5499 ENGINE AR-CORE
VALVE MECHANISM GP
BASE GP-VALVE COVER & INJ HARN
223-6408 BASE GP-VALVE COVER & INJ HARN
223-6408 BASE GP-VALVE COVER & INJ HARN
S/N EHX1-UP
PART OF 231-3701, 262-9144, 350-5499 ENGINE AR-CORE
BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
S/N EHX1-2919
PART OF 223-6408 BASE GP-VALVE COVER & INJ HARN
BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
S/N EHX2920-UP
PART OF 223-6408 BASE GP-VALVE COVER & INJ HARN
Type 1
BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
226-4927 BASE GP-VALVE COVER & INJ HARN
S/N EHX2920-UP
PART OF 223-6408 BASE GP-VALVE COVER & INJ HARN
Type 2
COVER GP-SOUND SUPPRESSION
273-1645 COVER GP-SOUND SUPPRESSION
273-1645 COVER GP-SOUND SUPPRESSION
S/N EHX1-UP
PART OF 271-8633, 360-3755 ENGINE AR-COMPLETE
COVER GP-VALVE MECHANISM
239-2252 COVER GP-VALVE MECHANISM
239-2252 COVER GP-VALVE MECHANISM
S/N EHX1-3253
PART OF 217-5670, 271-8633 ENGINE AR-COMPLETE
COVER GP-VALVE MECHANISM
280-7992 COVER GP-VALVE MECHANISM
280-7992 COVER GP-VALVE MECHANISM
S/N EHX3002-3456
PART OF 217-5670, 271-8633 ENGINE AR-COMPLETE
COVER GP-VALVE MECHANISM
295-6461 COVER GP-VALVE MECHANISM
295-6461 COVER GP-VALVE MECHANISM
S/N BTW1-UP; EHX1-UP
PART OF 217-5670, 271-8633, 360-3755 ENGINE AR-COMPLETE
FOR USE WITH REAR MOUNTED TURBO
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N EHX2416-2688
PART OF 262-9144 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N EHX2689-3316
PART OF 262-9144 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N EHX3317-UP
PART OF 262-9144 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N EHX3317-6102
PART OF 262-9144, 350-5499 ENGINE AR-CORE
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N EHX6013-UP
PART OF 350-5499 ENGINE AR-CORE
Type 1
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N EHX6013-UP
PART OF 350-5499 ENGINE AR-CORE
Type 2
MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
260-9631 MECHANISM GP-FUEL PUMP & VALVE
S/N EHX6013-UP
PART OF 350-5499 ENGINE AR-CORE
Type 3
ROCKER ARM GP
243-2468 ROCKER ARM GP
243-2468 ROCKER ARM GP
S/N EHX1-2688
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE, 223-6398 VALVE MECHANISM GP
ROCKER ARM GP
280-8043 ROCKER ARM GP
280-8043 ROCKER ARM GP
S/N EHX2689-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
301-5349 ROCKER ARM GP
301-5349 ROCKER ARM GP
S/N EHX2689-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
301-5350 ROCKER ARM GP
301-5350 ROCKER ARM GP
S/N EHX2689-UP
PART OF 301-5349 ROCKER ARM GP
ROCKER ARM GP
301-5352 ROCKER ARM GP
301-5352 ROCKER ARM GP -UNIT INJECTOR
S/N EHX2689-UP
PART OF 301-5349, 320-2793, 342-6643, 392-0066 ROCKER ARM GP
ROCKER ARM GP
301-5354 ROCKER ARM GP
301-5354 ROCKER ARM GP -VALVE
S/N EHX2689-UP
PART OF 301-5349 ROCKER ARM GP
ROCKER ARM GP
320-2793 ROCKER ARM GP
320-2793 ROCKER ARM GP -VALVE
S/N EHX3317-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
320-2794 ROCKER ARM GP
320-2794 ROCKER ARM GP
S/N EHX3317-UP
PART OF 320-2793, 342-6643 ROCKER ARM GP
ROCKER ARM GP
320-2796 ROCKER ARM GP
320-2796 ROCKER ARM GP
S/N EHX3317-UP
PART OF 320-2793 ROCKER ARM GP
ROCKER ARM GP
342-6643 ROCKER ARM GP
342-6643 ROCKER ARM GP -VALVE
S/N EHX3317-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
384-1365 ROCKER ARM GP
384-1365 ROCKER ARM GP
S/N EHX6013-UP
PART OF 392-0066 ROCKER ARM GP
ROCKER ARM GP
392-0066 ROCKER ARM GP
392-0066 ROCKER ARM GP
S/N EHX6013-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
ROCKER ARM GP
437-3876 ROCKER ARM GP
437-3876 ROCKER ARM GP
S/N EHX6013-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 1
ROCKER ARM GP
437-3876 ROCKER ARM GP
437-3876 ROCKER ARM GP
S/N EHX6013-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 2
ROCKER ARM GP
437-3876 ROCKER ARM GP
437-3876 ROCKER ARM GP
S/N EHX6013-UP
PART OF 260-9631 MECHANISM GP-FUEL PUMP & VALVE
Type 3
ROCKER ARM GP
437-3877 ROCKER ARM GP
437-3877 ROCKER ARM GP -EXHAUST
S/N EHX6013-UP
PART OF 437-3876 ROCKER ARM GP
ROCKER ARM GP
437-3881 ROCKER ARM GP
437-3881 ROCKER ARM GP -UNIT INJECTOR
S/N EHX6013-UP
PART OF 437-3876 ROCKER ARM GP
ROCKER ARM GP
489-8223 ROCKER ARM GP
489-8223 ROCKER ARM GP
S/N EHX6013-UP
PART OF 437-3876 ROCKER ARM GP
ROCKER ARM GP
524-3708 ROCKER ARM GP
524-3708 ROCKER ARM GP
S/N EHX6013-UP
PART OF 437-3876 ROCKER ARM GP
VALVE MECHANISM GP
223-6398 VALVE MECHANISM GP
223-6398 VALVE MECHANISM GP
S/N EHX1-2415
PART OF 231-3701 ENGINE AR-CORE
PLATE GP-ENGINE IDENTIFICATION
256-9738 PLATE GP-ENGINE IDENTIFICATION
256-9738 PLATE GP-ENGINE IDENTIFICATION
S/N EHX1-UP
PART OF 217-5670, 271-8633 ENGINE AR-COMPLETE
Type 1
PLATE GP-ENGINE IDENTIFICATION
256-9738 PLATE GP-ENGINE IDENTIFICATION
256-9738 PLATE GP-ENGINE IDENTIFICATION
S/N EHX1-UP
PART OF 217-5670, 271-8633 ENGINE AR-COMPLETE
Type 2
HOUSING GP-REAR
HOUSING GP-REAR
233-2462 HOUSING GP-REAR
233-2462 HOUSING GP-REAR
S/N EHX1-5550
PART OF 231-3701, 262-9144 ENGINE AR-CORE
HOUSING GP-REAR
350-8861 HOUSING GP-REAR
350-8861 HOUSING GP-REAR
S/N EHX5531-UP
PART OF 350-5499 ENGINE AR-CORE

Information:

(For parts list, see above)

Specifications
Compression Brake
C27 and C32 Engines for Caterpillar Built Machines
Systems Operation
Compression Brake - If Equipped
C27 and C32 Engines for Caterpillar Built Machines
Testing and Adjusting
Compression Brake Lash - Adjust - If Equipped
C27 and C32 Engines for Caterpillar Built Machines
Troubleshooting
CID 2533 FMI 06 Compression Brake Low/High Solenoid #1 current above normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2533 FMI 05 Compression Brake Low/High Solenoid #1 current below normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2534 FMI 05 Compression Brake Low/High Solenoid #2 current below normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2535 FMI 05 Compression Brake Medium/High Solenoid #1 current below normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2536 FMI 05 Compression Brake Medium/High Solenoid #2 current below normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2534 FMI 06 Compression Brake Low/High Solenoid #2 current above normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2535 FMI 06 Compression Brake Medium/High Solenoid #1 current above normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2536 FMI 06 Compression Brake Medium/High Solenoid #2 current above normal
C27 and C32 Engines for Caterpillar Built Machines
Compression Brake Solenoid Circuit - Test
C27 and C32 Engines for Caterpillar Built Machines
CID 2354 FMI 03 Engine Compression Brake Pedal Switch voltage above normal
C27 and C32 Engines for Caterpillar Built Machines
CID 2354 FMI 04 Engine Compression Brake Pedal Switch voltage below normal
C27 and C32 Engines for Caterpillar Built Machines
Engine News
New Camshafts Are Used for Certain C27 and C32 Commercial Engines {1210}
2014/05/20
Special Instruction
Improved Camshafts, Rocker Arm Assemblies, and High-Pressure Oil Pumps Are Now Used on C27 and C32 Machine Engines {1123, 1210, 1304, 1315}
Improved Camshafts, Rocker Arm Assemblies, and High-Pressure Oil Pumps Are Now Used on C27 and C32 Machine Engines {1123, 1210, 1304, 1315}
Crankshaft Seal Installation {1160, 1161}
Crankshaft Seal Installation {1160, 1161}
Specifications
Camshaft
C27 and C32 Engines for Caterpillar Built Machines
Camshaft
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
REMANUFACTURED COMPONENTS FOR D10T TRACK-TYPE TRACTORS POWERED BY C27 ENGINES
REMANUFACTURED COMPONENTS FOR D10T TRACK-TYPE TRACTORS POWERED BY C27 ENGINES
Testing and Adjusting
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Camshaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Camshaft - Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Improved Camshafts Are Now Used on Certain C27 and C32 Machines {1210}
2014/05/30
Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2013/09/25
Engine News
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Specifications
Main Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Seals
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Information Release Memo
REMANUFACTURED COMPONENTS FOR D10T TRACK-TYPE TRACTORS POWERED BY C27 ENGINES
REMANUFACTURED COMPONENTS FOR D10T TRACK-TYPE TRACTORS POWERED BY C27 ENGINES
REMAN CRANKSHAFTS NOW AVAILABLE FOR HIGH DISPLACEMENT (HD) 3500 ENGINES AND OTHER MINING APPLICATIONS
REMAN CRANKSHAFTS NOW AVAILABLE FOR HIGH DISPLACEMENT (HD) 3500 ENGINES AND OTHER MINING APPLICATIONS
Testing and Adjusting
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Rear Seal - Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
844H Wheel Dozer and
990H Wheel Loader Engine Supplement
Crankshaft Front Seal - Install
844H Wheel Dozer and
990H Wheel Loader Engine Supplement
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
New Tooling Is Available for Measuring the Deck Height on Certain Machines Equipped with C27 and C32 Engines {1201}
2010/08/26
Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
Oil and Coolant Leaks of the Plate Gasket on the C27 and C32 Engines{1201, 1201}
Oil and Coolant Leaks of the Plate Gasket on the C27 and C32 Engines{1201, 1201}
Specifications
Main Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Block
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Block
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Block
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
362-4250 Deck Height Measuring Tool{1201}
362-4250 Deck Height Measuring Tool{1201}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner - Remove
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner - Install
C27 and C32 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Installing the Cross Bolts for the Main Bearings in C27 and C32 Engines {1201, 1203}
2009/09/21
A New Gasket Is Available for the Rectangular Cover on the Engine Block on Certain C27 and C32 Machine Engines {1201, 1380, 7555}
2010/03/18
New Tooling Is Available for Measuring the Deck Height on Certain Machines Equipped with C27 and C32 Engines {1201}
2010/08/26
An Improved Plate Gasket Is Used Between the Spacer Plate and the Cylinder Block on Certain Machines Equipped with C27 and C32 Engines {1201, 7555}
2010/12/13
Engine News
A New Water Seal Assembly Is Now Used on All 3408, 3412, C27 and C32 Commercial Engines {1100, 7555}
2013/05/13
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Technical Information Bulletin
Diagnosing Fuel Dilution of Engine Oil for C27 and C32 Engines{1101, 1124, 1251, 1280, 1290}
Diagnosing Fuel Dilution of Engine Oil for C27 and C32 Engines{1101, 1124, 1251, 1280, 1290}
Specifications
Cylinder Head
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head Valves
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head Valves
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
REMANUFACTURED COMPONENTS FOR D10T TRACK-TYPE TRACTORS POWERED BY C27 ENGINES
REMANUFACTURED COMPONENTS FOR D10T TRACK-TYPE TRACTORS POWERED BY C27 ENGINES
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES FOR MINING AND OTHER APPLICATIONS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C27 and C32 Engines for Caterpillar Built Machines
Troubleshooting
Valve Rotator or Spring Lock Is Free
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Camshaft Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Install
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Springs - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Electronic Unit Injector Sleeve - Remove
C27 and C32 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Remove - C32
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Install - C32
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Remove - C27
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Head - Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Inspection Procedure for the Saddle of the Rocker Arm Shaft {1100, 1123}
2008/09/08
A New Outer Valve Spring Is Now Used {1100, 1108}
2008/11/17
A New Panel Is Used on C27 and C32 Engines {1100}
2009/10/07
A New Intake Valve and Seat Combination Is Now Used with a New Cylinder Head on the Engines of Certain Machines {1100, 1101}
2012/09/17
Cat<SUP>&reg;</SUP> Reman Now Offers Upgrade to New Cylinder Heads for Certain Machine Engines {1100}
2014/10/03
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
844H Wheel Dozer
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Specifications
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper
C27 and C32 Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
Testing and Adjusting
Vibration Damper - Check
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install - Type 1
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install - Type 2
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
844H Wheel Dozer
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Engine Oil Contains Elevated Lead (Pb) {1000, 1348}
Engine Oil Contains Elevated Lead (Pb) {1000, 1348}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Flywheel
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Flywheel
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Front)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Rear Gear Group - Time
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Front) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines
Gear Group (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
Correct Timing Procedure for the Engine {1206, 1212}
2005/09/05
A New Elbow is Now Used for the Rear Gear Train Oil Supply Lines {1204, 1206, 7517}
2008/01/21
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
New O-Ring Seal is Now Used on Certain Cat<SUP>&reg;</SUP> Machine Engines {1204, 7555}
New O-Ring Seal is Now Used on Certain Cat® Machine Engines {1204, 7555}
Specifications
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing
C27 and C32 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install - C32
C27 and C32 Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Technical Information Bulletin
REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER
REPLACEMENT LOCKNUTS FOR THE; C15, C-15, C-16, C18, C-18, AND 3406E FRONT COVER
Specifications
Crankshaft Seals
C27 and C32 Engines for Caterpillar Built Machines
Housing (Front)
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Housing (Front) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Housing (Front) - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Operation and Maintenance Manual
Engine Mounts - Inspect
844H Wheel Dozer
Disassembly and Assembly
Engine Trunnion - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Engine Oil Level - Check
844H Wheel Dozer
Engine Oil Sample - Obtain
844H Wheel Dozer
Engine Oil (High Speed) and Oil Filter - Change
844H Wheel Dozer
Engine Oil and Filter - Change
844H Wheel Dozer
Specifications
Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines
Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines
Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines
Engine Oil Pan
C27 and C32 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
New Oil Pan Gasket Is Available on Certain C27 and C32 Machine Engines {1302, 7555}
2010/05/27
A New O-ring Is Now Used on the Oil Pan Drain Adapter of the Engines in Certain Machines {1302, 1372}
2013/03/07
Engine News
A New Undersized Connecting Rod Bearing Is Available for All C27 and C32 Engines {1225}
2009/12/09
Special Instruction
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Connecting Rod Bearing Journal
C27 and C32 Engines for Caterpillar Built Machines
Connecting Rod
C27 and C32 Engines for Caterpillar Built Machines
Piston and Rings - C27 Engines
C27 and C32 Engines for Caterpillar Built Machines
Piston and Rings - C32 Engines
C27 and C32 Engines for Caterpillar Built Machines
Piston and Rings
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
PRODUCT LINE ADDITION: REMANUFACTURED 10R5457 CONNECTING ROD ASSEMBLY FOR CERTAIN C27 AND C32 ENGINE APPLICATIONS
PRODUCT LINE ADDITION: REMANUFACTURED 10R5457 CONNECTING ROD ASSEMBLY FOR CERTAIN C27 AND C32 ENGINE APPLICATIONS
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND POSSIBLY CLEANING 10R-5457 CONNECTING RODS IN CERTAIN CYLINDER PACKS, SHORT BLOCKS, AND LONG BLOCKS IN DEALER PARTS STOCK
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C27 and C32 Engines for Caterpillar Built Machines
Compression - Test
C27 and C32 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C27 and C32 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C27 and C32 Engines for Caterpillar Built Machines
Pistons and Connecting Rods - Install
C27 and C32 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C27 and C32 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
A New Undersized Connecting Rod Bearing Is Available for All C27 and C32 Machine Engines {1225}
2009/12/04
An Additional One Piece Steel Piston Is Available for Cylinder Packs Used in the C15 and C27 Engines of Certain Machines {1225, 1239}
An Additional One Piece Steel Piston Is Available for Cylinder Packs Used in the C15 and C27 Engines of Certain Machines {1225, 1239}
Updated Reuse And Salvage Guidelines for C27 and C32 Machine Engines {1202, 1218}
2015/04/10
Disassembly and Assembly
Rear Power Take-Off (RPTO) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Install
C27 and C32 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Disassemble
C27 and C32 Engines for Caterpillar Built Machines
Rear Power Take-Off (RPTO) - Assemble
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install - Type 1
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install - Type 2
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Service Magazine
Wear that is Acceptable in Specific Gear Pumps {4007, 5073, 5073, 7516}
2008/02/04
Engine News
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
New Rocker Arms Are Used on C27 and C32 Commercial Engines {1123}
2014/05/07
Correct Valve Rocker Arm Usage on C27 and C32 Engines {1123}
2015/09/04
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Engines {1123}
Operation and Maintenance Manual
Engine Valve Lash - Check
844H Wheel Dozer
Engine Valve Rotators - Inspect
844H Wheel Dozer
Special Instruction
Improved Camshafts, Rocker Arm Assemblies, and High-Pressure Oil Pumps Are Now Used on C27 and C32 Machine Engines {1123, 1210, 1304, 1315}
Improved Camshafts, Rocker Arm Assemblies, and High-Pressure Oil Pumps Are Now Used on C27 and C32 Machine Engines {1123, 1210, 1304, 1315}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
Specifications
Electronic Unit Injector Rocker Arm
C27 and C32 Engines for Caterpillar Built Machines
Valve Mechanism
C27 and C32 Engines for Caterpillar Built Machines
Valve Mechanism
C27 and C32 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Information Release Memo
REMANUFACTURED COMPONENTS FOR D10T TRACK-TYPE TRACTORS POWERED BY C27 ENGINES
REMANUFACTURED COMPONENTS FOR D10T TRACK-TYPE TRACTORS POWERED BY C27 ENGINES
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM TO TORQUE THE ROCKER ARM SHAFT BOLTS ON CERTAIN C27 AND C32 ENGINES
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE EMISSIONS LABEL ON THE ENGINE IN CERTAIN 12M, AND 120M MOTOR GRADERS, 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, 990H, 992K, AND 993K WHEEL LOADERS, AND D8T TRACK-TYPE TRACTORS
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C27 and C32 Engines for Caterpillar Built Machines
Finding Top Center Position for No. 1 Piston
C27 and C32 Engines for Caterpillar Built Machines
Troubleshooting
Excessive Valve Lash
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Rocker Arm - Disassemble
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm - Assemble
C27 and C32 Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C27 and C32 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C27 and C32 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install - C27
C27 and C32 Engines for Caterpillar Built Machines
Valve Actuator (Variable) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Valve Actuator (Variable) - Install
C27 and C32 Engines for Caterpillar Built Machines
Valve Mechanism Cover - Remove and Install - C32
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
A New Rocker Arm Assembly is Available {1123}
2008/08/25
The Torque Specification on the Rocker Arm Bolts has Changed {1102, 1123}
2008/08/25
Inspection Procedure for the Saddle of the Rocker Arm Shaft {1100, 1123}
2008/09/08
A New Torque Sequence for the Valve Cover Is Now Used {1107}
2008/12/08
New Rocker Arms Are Available {1123}
2009/02/16
A New Rocker Arm Assembly is Available {1123}
2009/02/02
A New Bolt Is Now Available for the Valve Mechanisms on the Engines of Certain Machines {1102}
2009/11/02
New Rocker Arm Assemblies Are Available on Some Machines {1123}
2010/03/08
A New Rocker Arm Assembly Is Available for Certain Machine Engines {1123}
2011/03/09
A New Bolt Is Now Used to Secure the Rocker Arm Shaft on the Engines of Certain C27 and C32 Machines {1102, 1123, 1292, 7553}
A New Bolt Is Now Used to Secure the Rocker Arm Shaft on the Engines of Certain C27 and C32 Machines {1102, 1123, 1292, 7553}
A New Bolt Is Now Used to Secure the Rocker Arm Shaft on the Engines of Certain C27 and C32 Machines {1102, 1123, 1292, 7553}
2011/01/24
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
An Improved Rocker Arm Assembly Is Used on C27 and C32 Machine Engines {1102, 1123}
2014/05/30
Improved Reman Camshafts Are Now Used on Certain C27 and C32 Machines {1209, 1210}
2013/09/25
A New Valve Cover Base and Wiring Harnesses Are Now Used on Certain C27 and C32 Machine Engines {1120, 1408}
2013/12/19
New Rocker Arms Are Used for Certain C27 and C32 Machine Engines {1102, 1123}
2014/04/03
New Guidelines for Valve Cover Base Threaded Insert on C27 and C32 Engines {1107, 1120}
2014/10/27
Updated Torque Requirements for Reman Rocker Arm Adjusting Screw Lock Nuts on Certain C15, C18, C27, and C32 Machine Engines {1123}
2015/03/25
Correct Valve Rocker Arm Usage on C27 and C32 Machine Engines {1123}
2015/09/03
Cat<SUP>&reg;</SUP> Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Cat® Reman Announces Changes to the Remanufactured Injector Rocker Arms for 3406E, 3456, C15, C16, C18, C27, and, C32 Machine Engines {1123}
Specifications
Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear)
C27 and C32 Engines for Caterpillar Built Machines
Disassembly and Assembly
Housing (Rear) - Remove
C27 and C32 Engines for Caterpillar Built Machines
Housing (Rear) - Install
C27 and C32 Engines for Caterpillar Built Machines
Service Magazine
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
New Tooling and Installation Process for Crankshaft Seal on C27 and C32 Engines {0701, 1160, 1161}
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Valve Cover Base Threaded Insert Repair {0599, 0676, 0700, 0701, 1107}
Service Magazine
A New Improved Seal Is Now Used in the Reman Water Pumps in the Engines of Certain Machines {1000, 1361, 7555}
2012/05/10

Truck sale:

2008 CAT 844H
USD $269,586 
2008 CAT 844H

OEM Used Equipment
2008 CAT 844H
USD $435,000 
2008 CAT 844H

CROWE EQUIPMENT INC
Jasonville, Indiana
2008 CAT 844H
USD $249,000 
2008 CAT 844H

OEM Used Equipment
 
 
2004 CAT 844H

JM WOOD AUCTION COMPANY, INC
Montgomery, Alabama
 
 
2008 CAT 844H

JM WOOD AUCTION COMPANY, INC
Montgomery, Alabama
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.