AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

302-3811 VALVE GP-SOLENOID S/N DWX1-UP PART OF 253-7917 VALVE GP-TRANSMISSION CONTROL FIELD REPLACEMENT ORDER @@@@@524-2035@@@@@ 994F


POWER TRAIN
VALVE GP-SOLENOID
VALVE GP-TORQUE CONV PRIORITY
CONTROL GP-TRANSMISSION HYD
BRAKING SYSTEM
BRAKE GP
FRAME AND BODY
BUMPER GP

WHEEL LOADER 994F WHEEL LOADER 442
 994F Wheel Loader 44200001-UP (MACHINE) POWERED BY 3516 Engine SEBP3851 994F 442   (2005)

POWER TRAIN

VALVE GP-SOLENOID
VALVE GP-SOLENOID
147-5399 VALVE GP-SOLENOID
VALVE GP-SOLENOID
302-3811 VALVE GP-SOLENOID
 

#SEBP38510690
 

302-3811: VALVE GP-SOLENOID

302-3811 VALVE GP-SOLENOID
S/N DWX1-UP
PART OF 253-7917 VALVE GP-TRANSMISSION CONTROL
FIELD REPLACEMENT ORDER @@@@@524-2035@@@@@
i03405721 SEBP3851
3023811 VALVE GP-SOLENOID Parts scheme
  For full view, you need register

Parts for your 994F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. J [1] CARTRIDGE AS  
  7X-0579 [1] WASHER-HARD (8.8X25.5X2-MM THK)  
  111-0343 [1] LOCKNUT (5/16-18-THD)  
2. 312-4288 [1] COIL AS  
  1S-9593 [2] STRAP-CABLE  
  8T-8730 [2] SOCKET-CONNECTOR (16-GA TO 18-GA)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
   
    AVAILABLE REPAIR KIT(S):
  100-4083 J [1] KIT-SEAL (SOLENOID VALVE)  
    (INCLUDES O-RINGS & BACK-UP RINGS)
  J   KIT MARKED "J" SERVICES PARTS MARKED "J"
 

#SEBP38510691
 

6I-8563: VALVE GP-TORQUE CONV PRIORITY

6I-8563 VALVE GP-TORQUE CONV PRIORITY
S/N 4421-UP
PART OF 245-1285 LINES GP-TRANSMISSION OIL
i00091591 SEBP3851
6I8563 VALVE GP-TORQUE CONV PRIORITY Parts scheme
  For full view, you need register

Parts for your 994F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1594 [2] BOLT (3/8-16X1-IN)  
2. 6I-8564 [1] BODY AS-VALVE  
3. 3P-4053 [1] SPRING  
4. 2S-9750 [1] COVER  
5. 8M-5249 [1] SEAL-O-RING  
6. 2M-7041 [1] SLUG  
7. 1P-9699 [1] STOP  
8. 8H-9513 [1] DOWEL  
9. 8M-4446 [1] SEAL-O-RING  
10. 5S-4437 [1] SPOOL AS  
  3D-8317 [1] RING-RETAINING  
  4B-9880 [1] BALL  
  4M-2381 [1] SPRING  
  8M-1013 [1] RETAINER  
13. 5M-9624 B [6] SHIM (0.25-MM THK)  
14. 6V-3965 [1] FITTING (QUICK DISCONNECT)  
15. 3J-1907 [1] SEAL-O-RING  
16. 6V-0852 [1] CAP-DUST  
17. 150-3065 [1] ELBOW AS  
  3J-1907 [1] SEAL-O-RING  
  6V-0484 [1] ELBOW  
18. 5M-2894 [2] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
 

#SEBP38510692
 

253-7917: VALVE GP-TRANSMISSION CONTROL

253-7917 VALVE GP-TRANSMISSION CONTROL
S/N DWX1-UP
PART OF 252-7818 CONTROL GP-TRANSMISSION HYD
Type 1
i02151108 SEBP3851
2537917 VALVE GP-TRANSMISSION CONTROL Parts scheme 2537917 VALVE GP-TRANSMISSION CONTROL Parts scheme
  For full view, you need register

Parts for your 994F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-0723 Y [1] VALVE GP-SELECTOR (CLUTCH OIL DISTRIBUTION)  
2. 6Y-2762 [1] PLATE-DIVIDER  
3. 153-7909 Y [1] VALVE GP-SELECTOR & PRESS CONT (CLUTCH OIL PRESSURE)  
4. 250-6130 [1] MANIFOLD-TOP  
5. 153-7916 [1] CLIP AS-CONNECTING  
6. 1T-0416 [3] BOLT (5/16-18X0.75-IN)  
7. 9M-1974 [24] WASHER-HARD (8.8X16X2-MM THK)  
8. 5L-1761 [21] BOLT (5/16-18X5.5-IN)  
9. 147-5399 Y [5] VALVE GP-SOLENOID (TRANSMISSION CLUTCH)  
10. 153-7915 [1] HARNESS AS-TRANSMISSION  
  102-8802 [5] KIT-RECEPTACLE (2-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
11. 3S-2093 [7] STRAP-CABLE  
12. 9S-8007 [4] PLUG  
13. 7J-0204 [4] SEAL-O-RING  
14. 5M-6214 [2] PLUG (1/8-27 PTF)  
15. 9F-2247 [1] PLUG-PIPE (1/8-27-THD)  
  Y   SEPARATE ILLUSTRATION
 

#SEBP38510693
 

253-7917: VALVE GP-TRANSMISSION CONTROL

253-7917 VALVE GP-TRANSMISSION CONTROL
S/N DWX1-UP
PART OF 252-7818 CONTROL GP-TRANSMISSION HYD
Type 2
i03405720 SEBP3851
2537917 VALVE GP-TRANSMISSION CONTROL Parts scheme 2537917 VALVE GP-TRANSMISSION CONTROL Parts scheme
  For full view, you need register

Parts for your 994F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 6Y-0723 Y [1] VALVE GP-SELECTOR (CLUTCH OIL DISTRIBUTION)  
2. 6Y-2762 [1] PLATE-DIVIDER  
3. 153-7909 Y [1] VALVE GP-SELECTOR & PRESS CONT (CLUTCH OIL PRESSURE)  
4. 250-6130 [1] MANIFOLD-TOP  
5. 153-7916 [1] CLIP AS-CONNECTING  
6. 1T-0416 [3] BOLT (5/16-18X0.75-IN)  
7. 9M-1974 [24] WASHER-HARD (8.8X16X2-MM THK)  
8. 5L-1761 [21] BOLT (5/16-18X5.5-IN)  
9. 302-3811 CY [5] VALVE GP-SOLENOID (TRANSMISSION CLUTCH)  
10. 153-7915 [1] HARNESS AS-TRANSMISSION  
11. 3S-2093 [7] STRAP-CABLE  
12. 315-9841 C [4] PLUG AS  
    (EACH INCLUDES)
  9S-8007 [1] PLUG  
  238-5079 [1] SEAL-O-RING  
13. 315-9842 [1] PLUG AS  
  6Y-0789 [1] PLUG  
  228-4947 [1] SEAL-O-RING  
  238-5082 [1] SEAL-O-RING  
14. 5M-6214 [2] PLUG (1/8-27 PTF)  
15. 9F-2247 [1] PLUG-PIPE (1/8-27-THD)  
16. 7B-3028 [1] SCREW-DRIVE (NO 4X 3/16-IN)  
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP38510694
 

137-3505: WHEEL GP-FINAL DRIVE & BRAKE

137-3505 WHEEL GP-FINAL DRIVE & BRAKE
S/N 4421-UP
PART OF 152-8920 AXLE AR-FIXED, 152-8930 AXLE AR-OSCILLATING
i00963416 SEBP3851
1373505 WHEEL GP-FINAL DRIVE & BRAKE Parts scheme 1373505 WHEEL GP-FINAL DRIVE & BRAKE Parts scheme
  For full view, you need register

Parts for your 994F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2G-4553 [1] PLATE  
2. 6V-0439 [1] PLUG-MAGNETIC  
3. 6Y-8813 [10] DISC-FRICTION  
4. 7I-5535 [2] WASHER-THRUST  
5. 8R-5960 [1] CARRIER-PLANETARY  
6. 8R-6931 [1] RETAINER  
7. 8R-6932 [4] RETAINER  
8. 8R-6933 [4] SHAFT-PLANETARY  
9. 8R-6934 [8] WASHER-THRUST  
10. 8R-6937 [4] SHAFT-PLANETARY  
11. 8R-6938 [8] WASHER-THRUST  
12. 8R-6941 [11] PLATE-OUTER  
13. 8R-6942 [1] SPACER  
14. 8R-6943 [1] PISTON  
15. 8R-6944 [7] SPRING  
16. 8R-6945 [1] PLATE  
17. 8R-6948 [1] TUBE AS  
18. 8R-7163 [1] COVER  
19. 8X-0559 [1] RING-RETAINING  
20. 8X-4161 [1] BEARING  
21. 9F-2167 [1] SCREW-PURGE (3/8-24X1.164-IN)  
22. 9U-3749 [1] ANCHOR-BRAKE  
23. 9X-2608 [1] ADAPTER  
24. 101-9445 [4] RETAINER  
25. 115-4877 [1] GEAR-SUN (24-TEETH)  
26. 115-4878 [4] GEAR-PLANETARY (23-TEETH)  
27. 115-4879 [1] GEAR-SUN (24-TEETH)  
28. 115-4880 [4] GEAR-PLANETARY (23-TEETH)  
29. 137-3506 [1] CARRIER-PLANETARY  
30. 137-6923 [4] BUSHING  
31. 137-6924 [4] BUSHING  
32. 137-8627 [1] SPINDLE  
33. 137-8628 [1] HUB-REACTION  
34. 137-8629 [1] RING  
35. 175-0100 [1] SEAL-RECTANGULAR  
36. 175-0103 [1] SEAL-RECTANGULAR  
37. 175-3279 [1] RING-SEAL  
38. 175-3280 [1] RING-SEAL  
39. 179-2239 [1] WHEEL AS  
  8R-6578 [1] WHEEL  
  255-4523 [61] STUD  
40. 196-7795 [1] BEARING AS-TAPERED ROLLER  
41. 197-2731 [1] GEAR-RING (72-TEETH)  
42. 197-2732 [1] GEAR-RING (72-TEETH)  
43. 201-7718 [1] BEARING AS-TAPERED ROLLER  
44. 314-4130 [1] SEAL GP-DUO-CONE  
  314-4129 [2] RING-TORIC  
45. 453-5929 [1] SEAL GP-DUO-CONE  
  314-4131 [2] RING-TORIC  
46. 1W-6523 [1] PLUG  
47. 2D-6506 [1] SEAL-O-RING  
48. 2D-8364 [1] SEAL-O-RING  
49. 2P-1279 [1] LOCKNUT (9/16-18-THD)  
50. 2S-4078 [1] SEAL-O-RING  
51. 3D-2824 [1] SEAL-O-RING  
52. 3J-7354 [2] SEAL-O-RING  
53. 4J-5477 [2] SEAL-O-RING  
54. 5H-8991 [7] SHAFT  
55. 5P-1981 [4] RING-RETAINING  
56. 5P-8245 [28] WASHER-HARD (13.5X25.5X3-MM THK)  
57. 5P-8247 [13] WASHER-HARD (17X32X3.5-MM THK)  
58. 6V-4429 M [13] BOLT (M16X2X40-MM)  
59. 6V-5839 [4] WASHER (11X21X2.5-MM THK)  
60. 6V-7732 M [4] BOLT (M10X1.5X25-MM)  
61. 6V-8097 M [28] BOLT (M12X1.75X30-MM)  
62. 6V-8237 [40] WASHER (26X44X4-MM THK)  
63. 6V-8647 [1] CONNECTOR  
64. 7X-4781 [1] SEAL-O-RING  
65. 7X-4801 [1] SEAL-O-RING  
66. 8C-3411 M [51] BOLT (M30X3.5X90-MM)  
67. 8C-7562 M [4] SCREW-FLAT HEAD (M8X1.25X20-MM)  
68. 8R-6947 B [1] SHIM PACK (INCLUDES 13-SHIMS)  
69. 8T-0667 M [60] BOLT (M24X3X100-MM)  
70. 8T-9533 M [3] SETSCREW (M12X1.75-THD)  
71. 9S-8008 [1] PLUG (1-1/16-12-THD)  
72. 9X-8399 [51] WASHER (33X56X6-MM THK)  
73. 9X-8483 M [3] SETSCREW-SOCKET (M12X1.75X80-MM)  
74. 148-8390 [1] ELBOW AS  
  6V-8626 [1] ELBOW  
  2M-9780 [1] SEAL-O-RING  
  7J-9108 [1] SEAL-O-RING  
75. 6V-9831 J [1] CAP (ORFS)  
  B   USE AS REQUIRED
  J   SHIPPING & STORAGE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP38510695
 

246-6220: BUMPER & DRAWBAR AR

246-6220 BUMPER & DRAWBAR AR
S/N 4421-UP
PART OF 245-8805, 245-8806 LIFT AR
i02153492 SEBP3851
  For full view, you need register

Parts for your 994F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  246-6221 Y [1] BUMPER & DRAWBAR GP  
  281-7665 Y [1] TANK GP-FUEL (RH)  
  281-7666 Y [1] TANK GP-FUEL (LH)  
  281-7667 Y [1] TANK GP-FUEL (CENTER)  
  247-4012 Y [1] WIRING GP-REAR (BUMPER)  
  251-8325 [1] FILM-IDENTIFICATION (SERVICE METER)  
    NEAR LOWER RIGHT OF VIMS HOURMETER IN LH FRONT CORNER OF BUMPER
  251-8326 [1] FILM-IDENTIFICATION (STARTING MOTOR LOCKOUT)  
    TO RIGHT OF STARTER LOCKOUT SWITCH IN LH FRONT CORNER OF BUMPER (SWITCH IS LOWER LEFT IN BUMPER OPENING)
  252-1761 [1] FILM-IDENTIFICATION (WORK LIGHTS)  
    OVER LIGHT SWITCHES IN LH FRONT CORNER OF BUMPER
  190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
    ON REAR OUTSIDE SURFACE OF BUMPER, 75 MM FROM EACH SIDE
  251-8327 [1] FILM-IDENTIFICATION (TRANSMISSION LOCKOUT)  
    TO RIGHT OF TRANSMISSION LOCKOUT SWITCH IN LH FRONT CORNER OF BUMPER (SWITCH IS LOWER RIGHT IN BUMPER OPENING)
  7X-3229 [4] FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)  
    ON SIDES OF BUMPER, ONE IN FRONT OF EACH 70 DIA HOLE
  109-0361 [1] FILM-INSTRUCTION (ENGINE SHUTDOWN)  
    OVER ENGINE SHUTDOWN SWITCH IN LH FRONT CORNER OF BUMPER
  246-2641 [2] PADLOCK GP  
    (EACH INCLUDES KEY)
  124-7651 [1] PLATE-INSTRUCTION (GROUND LEVEL)  
    OVER VIMS SWITCH & PORT IN LH FRONT CORNER OF BUMPER
  Y   SEPARATE ILLUSTRATION
 

#SEBP38510696
 

248-0986: BUMPER & DRAWBAR AR

248-0986 BUMPER & DRAWBAR AR
S/N 4421-UP
PART OF 245-8807 LIFT AR
i02154554 SEBP3851
  For full view, you need register

Parts for your 994F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  248-0987 Y [1] BUMPER & DRAWBAR GP  
  281-7665 Y [1] TANK GP-FUEL (RH)  
  281-7666 Y [1] TANK GP-FUEL (LH)  
  281-7667 Y [1] TANK GP-FUEL (CENTER)  
  247-4012 Y [1] WIRING GP-REAR (BUMPER)  
  251-8325 [1] FILM-IDENTIFICATION (SERVICE METER)  
    NEAR LOWER RIGHT OF VIMS HOURMETER IN LH FRONT CORNER OF BUMPER
  251-8326 [1] FILM-IDENTIFICATION (STARTING MOTOR LOCKOUT)  
    TO RIGHT OF STARTER LOCKOUT SWITCH IN LH FRONT CORNER OF BUTTON (SWITCH IS LOWER LEFT IN BUMPER OPENING)
  252-1761 [1] FILM-IDENTIFICATION (WORK LIGHTS)  
    OVER LIGHT SWITCHES IN LH FRONT CORNER OF BUMPER
  190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
    ON REAR OUTSIDE SURFACE OF BUMPER, 75-MM FROM EACH SIDE, CENTERED VERTICALLY ON SURFACE
  251-8327 [1] FILM-IDENTIFICATION (TRANSMISSION LOCKOUT)  
    TO RIGHT OF TRANSMISSION LOCKOUT SWITCH IN LH FRONT CORNER OF BUMPER (SWITCH IS LOWER RIGHT IN BUMPER OPENING)
  7X-3229 [4] FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)  
    ON SIDES OF BUMPER, ONE IN FRONT OF EACH 70 DIA HOLE
  109-0361 [1] FILM-INSTRUCTION (ENGINE SHUTDOWN)  
    OVER ENGINE SHUTDOWN SWITCH IN LH FRONT CORNER OF BUMPER
  246-2641 [2] PADLOCK GP  
    (EACH INCLUDES KEY)
  124-7651 [1] PLATE-INSTRUCTION (GROUND LEVEL)  
    OVER VIMS SWITCH & PORT IN LH FRONT CORNER OF BUMPER
  Y   SEPARATE ILLUSTRATION
 

#SEBP38510697
 

345-3818: BUMPER & DRAWBAR AR

345-3818 BUMPER & DRAWBAR AR
S/N 4421-UP
PART OF 321-1923 LIFT AR
i03901501 SEBP3851
  For full view, you need register

Parts for your 994F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  345-3819 Y [1] BUMPER & DRAWBAR GP  
  281-7665 Y [1] TANK GP-FUEL (RH)  
  281-7666 Y [1] TANK GP-FUEL (LH)  
  281-7667 Y [1] TANK GP-FUEL (CENTER)  
  247-4012 Y [1] WIRING GP-REAR (BUMPER)  
   
  246-2641 [2] PADLOCK GP  
    (EACH INCLUDES)
  5P-8500 [1] KEY  
   
  251-8325 [1] FILM-IDENTIFICATION (SERVICE METER)  
    (LOCATE NEAR LOWER RIGHT OF VIMS HOURMETER IN LH FRONT CORNER OF BUMPER.
  251-8326 [1] FILM-IDENTIFICATION (STARTING MOTOR LOCKOUT)  
    (LOCATE TO RIGHT OF STARTER LOCKOUT SWITCH IN LH FRONT CORNER OF BUMBER. SWITCH IS LOWER LEFT IN BUMPER OPENING
  251-8327 [1] FILM-IDENTIFICATION (TRANSMISSION LOCKOUT)  
    (LOCATE TO RIGHT OF TRANSMISSION LOCKOUT SWITCH IN LH FRONT CORNER OF BUMPER. SWITCH IS LOWER RIGHT IN BUMPER OPENING
  252-1761 [1] FILM-IDENTIFICATION (WORK LIGHTS)  
    (LOCATE OVER LIGHT SWITCHES IN LH FRONT CORNER OF BUMPER
  7X-3229 [4] FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)  
    (LOCATE ON SIDES OF BUMPER, ONE IN FRONT OF EACH 70 DIAMETER HOLE)
  109-0361 [1] FILM-INSTRUCTION (ENGINE SHUTDOWN)  
    (LOCATE OVER ENGINE SHUTDOWN SWITCH IN LH FRONT CORNER)
  190-5386 [2] FILM-IDENTIFICATION (ROUND RED REFLECTIVE)  
    (LOCATE ON REAR OUTSIDE SURFACE OF BUMPER, 75-MM FROM EACH SIDE, CENTERED VERTICALLY ON SURFACE.
  124-7651 [1] PLATE-INSTRUCTION (GROUND LEVEL)  
    (LOCATE OVER VIMS SWITCH & PORT IN LH FRONT CORNER OF BUMPER)
  Y   SEPARATE ILLUSTRATION
 

#SEBP38510698
 

246-6221: BUMPER & DRAWBAR GP

246-6221 BUMPER & DRAWBAR GP
S/N 4421-UP
PART OF 246-6220 BUMPER & DRAWBAR AR
Type 1
i02153498 SEBP3851
2466221 BUMPER & DRAWBAR GP Parts scheme 2466221 BUMPER & DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 994F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7V-0638 [24] SPACER (16X28X25-MM THK)  
2. 8T-4222 [18] WASHER-PLATED (11X32X2.5-MM THK)  
3. 8T-4986 [4] CLAMP-HOSE  
4. 8X-1400 [1] ROD AS  
5. 8X-1401 [1] PIN  
6. 8X-7075 [2] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
7. 235-6120 [2] HOSE  
8. 246-3259 I [1] HOSE AS  
9. 246-3260 I [1] HOSE AS  
11. 246-6234 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
12. 251-2210 [4] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
13. 253-1582 [1] BRACKET AS (RH)  
14. 253-1583 [1] BRACKET AS (LH)  
15. 253-1587 [1] TREAD AS (RH)  
16. 253-1588 [1] TREAD AS (LH)  
17. 264-7653 [2] COVER  
18. 266-2490 [1] COVER  
19. 280-2267 [1] TREAD AS (RH)  
20. 280-2268 [1] TREAD AS (LH)  
21. 148-8335 [3] CONNECTOR AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
22. 148-8357 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9008 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
23. 5P-1076 [24] WASHER-HARD (13.5X30X4-MM THK)  
24. 5P-7854 [2] CLIP (LOOP)  
25. 7X-0515 [6] WASHER-HARD (17X35X5-MM THK)  
26. 7X-2554 M [6] BOLT (M16X2X70-MM)  
27. 7X-7729 [9] WASHER (11X25X3-MM THK)  
28. 8T-4121 [10] WASHER-HARD (11X21X2.5-MM THK)  
29. 8T-4136 M [30] BOLT (M10X1.5X25-MM)  
30. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
31. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
32. 8T-4186 M [4] BOLT (M10X1.5X40-MM)  
33. 8T-4223 [18] WASHER-HARD (13.5X25.5X3-MM THK)  
34. 8T-6466 M [6] BOLT (M10X1.5X60-MM)  
35. 8T-6868 M [24] BOLT (M12X1.75X80-MM)  
36. 9D-1829 [1] CLIP  
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

#SEBP38510699
 

246-6221: BUMPER & DRAWBAR GP

246-6221 BUMPER & DRAWBAR GP
S/N 4421-UP
PART OF 246-6220 BUMPER & DRAWBAR AR
Type 2
i02490104 SEBP3851
2466221 BUMPER & DRAWBAR GP Parts scheme
  For full view, you need register

Parts for your 994F WHEEL LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7V-0638 [24] SPACER (16X28X25-MM THK)  
2. 8T-4222 C [28] WASHER-PLATED (11X32X2.5-MM THK)  
3. 8T-4986 [4] CLAMP-HOSE  
4. 8X-1400 [1] ROD AS  
5. 8X-1401 [1] PIN  
6. 235-6120 [2] HOSE  
7. 246-3259 I [1] HOSE AS  
8. 246-3260 I [1] HOSE AS  
10. 246-6234 [1] BRACKET AS  
  8T-3490 M [2] NUT-WELD (M10X1.5-THD)  
11. 251-2210 [4] BRACKET AS  
    (EACH INCLUDES)
  8T-3490 M [1] NUT-WELD (M10X1.5-THD)  
12. 253-1582 [1] BRACKET AS (RH)  
13. 253-1583 [1] BRACKET AS (LH)  
14. 264-7653 [2] COVER  
15. 266-2490 [1] COVER  
16. 283-1551 C [1] TREAD (LH)  
17. 283-1552 C [1] TREAD (LH)  
18. 283-1553 C [1] TREAD (RH)  
19. 283-1554 C [1] TREAD (RH)  
20. 148-8335 [3] CONNECTOR AS  
    (EACH INCLUDES)
  5K-9090 [1] SEAL-O-RING  
  6V-8635 [1] CONNECTOR  
  7M-8485 [1] SEAL-O-RING  
21. 148-8357 [1] ELBOW AS  
  5K-9090 [1] SEAL-O-RING  
  6V-9008 [1] ELBOW  
  7M-8485 [1] SEAL-O-RING  
22. 238-0251 CM [28] SCREW-BUTTON HEAD (M10X1.5X25-MM)  
23. 5P-1076 [24] WASHER-HARD (13.5X30X4-MM THK)  
24. 5P-7854 [2] CLIP (LOOP)  
25. 7X-0515 [6] WASHER-HARD (17X35X5-MM THK)  
26. 7X-2554 M [6] BOLT (M16X2X70-MM)  
27. 7X-7729 [9] WASHER (11X25X3-MM THK)  
28. 8M-3175 C [12] WASHER-HARD (10.2X16X3-MM THK)  
29. 8T-4121 C [2] WASHER-HARD (11X21X2.5-MM THK)  
30. 8T-4136 CM [6] BOLT (M10X1.5X25-MM)  
31. 8T-4137 M [3] BOLT (M10X1.5X20-MM)  
32. 8T-4183 M [12] BOLT (M12X1.75X40-MM)  
33. 8T-4186 CM [2] BOLT (M10X1.5X40-MM)  
34. 8T-4223 C [12] WASHER-HARD (13.5X25.5X3-MM THK)  
35. 8T-6868 M [24] BOLT (M12X1.75X80-MM)  
36. 9D-1829 [1] CLIP  
  C   CHANGE FROM PREVIOUS TYPE
  I   REFER TO HYDRAULIC INFORMATION SYSTEM
  M   METRIC PART
 

Information:

Technical Information Bulletin
Failure of Screen On Solenoid Valve For Certain Cat<SUP>&reg;</SUP> Products{3073, 3139, 5479}
Failure of Screen On Solenoid Valve For Certain Cat® Products{3073, 3139, 5479}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Replacement Solenoid Valves May Fail on Certain Transmissions {3073, 3167, 3174, 5479, 7499}
Specifications
Solenoid Valve (Transmission Clutch)
994F Wheel Loader Power Train
Systems Operation
Solenoid Valves
994F Wheel Loader Power Train
Testing and Adjusting
Solenoid Valve (Transmission Clutch) - Test
994F Wheel Loader Power Train
Troubleshooting
MID 081 - CID 1401 - FMI 03
994F Wheel Loader Power Train
MID 081 - CID 1401 - FMI 05
994F Wheel Loader Power Train
MID 081 - CID 1401 - FMI 06
994F Wheel Loader Power Train
MID 081 - CID 1402 - FMI 03
994F Wheel Loader Power Train
MID 081 - CID 1402 - FMI 05
994F Wheel Loader Power Train
MID 081 - CID 1402 - FMI 06
994F Wheel Loader Power Train
MID 081 - CID 1403 - FMI 03
994F Wheel Loader Power Train
MID 081 - CID 1403 - FMI 05
994F Wheel Loader Power Train
MID 081 - CID 1403 - FMI 06
994F Wheel Loader Power Train
MID 081 - CID 1404 - FMI 03
994F Wheel Loader Power Train
MID 081 - CID 1404 - FMI 05
994F Wheel Loader Power Train
MID 081 - CID 1404 - FMI 06
994F Wheel Loader Power Train
MID 081 - CID 1405 - FMI 03
994F Wheel Loader Power Train
MID 081 - CID 1405 - FMI 05
994F Wheel Loader Power Train
MID 081 - CID 1405 - FMI 06
994F Wheel Loader Power Train
Service Magazine
A New Coil Assembly is Now Used {5479}
2011/05/04
Improved Solenoid Valve Group Is Now Used On Certain Load Haul Dumps and Wheel Loaders {3073, 3139, 5479}
2014/10/27

Caterpillar Parts SIS Catalog 994F :

VALVE GP-SOLENOID
147-5399 VALVE GP-SOLENOID
VALVE GP-SELECTOR & PRESS CONT
153-7909 VALVE GP-SELECTOR & PRESS CONT
VALVE GP-SELECTOR
6Y-0723 VALVE GP-SELECTOR
VALVE GP-MODULATING
311-6364 VALVE GP-MODULATING
VALVE GP-MODULATING
217-2708 VALVE GP-MODULATING
VALVE GP-MODULATING
216-5342 VALVE GP-MODULATING
UNIVERSAL JOINT GP
252-5660 UNIVERSAL JOINT GP
UNIVERSAL JOINT GP
112-6547 UNIVERSAL JOINT GP
VALVE GP-TORQUE CONV PRIORITY
6I-8563 VALVE GP-TORQUE CONV PRIORITY
VALVE GP-TRANSMISSION CONTROL
253-7917 VALVE GP-TRANSMISSION CONTROL
VALVE GP-TRANSMISSION CONTROL
253-7917 VALVE GP-TRANSMISSION CONTROL
WHEEL GP-FINAL DRIVE & BRAKE
137-3505 WHEEL GP-FINAL DRIVE & BRAKE
246-6220 BUMPER & DRAWBAR AR
248-0986 BUMPER & DRAWBAR AR
345-3818 BUMPER & DRAWBAR AR
BUMPER & DRAWBAR GP
246-6221 BUMPER & DRAWBAR GP

Truck sale:

 
 
CATERPILLAR 994F 2010
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
CARTER MACHINERY
United States
 
Call 
2010 CAT 994F

CARTER MACHINERY
Salem, Virginia
2009 CAT 994F
Call 
2009 CAT 994F

Europea Heavy Equipment LLC
City Fistival, United Arab Emirates
 
USD $495,000 
2008 CAT 994F

Vista Equipment
Vancouver, Washington
CATERPILLAR 994F 2008
 
CATERPILLAR 994F 2008
- WHEEL LOADERS/INTEGRATED TOOLCARRIERS
ZEPPELIN POWER SYSTEMS
>
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.