AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

G3520B Industrial Engine GET00001-UP BASIC ENGINE Caterpillar SIS



GAS ENGINE G3520B GAS ENGINE GET
 G3520B Industrial Engine GET00001-UP SEBP3861 G3520B GET   (2002)

Parts group G3520B:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
ACTUATOR & MTG GP-BYPASS
224-6200 ACTUATOR & MTG GP-BYPASS
224-6200 ACTUATOR & MTG GP-BYPASS
PART OF 224-6194 LINES GP-AIR
Type 1
AN ATTACHMENT
ACTUATOR & MTG GP-BYPASS
224-6200 ACTUATOR & MTG GP-BYPASS
224-6200 ACTUATOR & MTG GP-BYPASS
PART OF 224-6194 LINES GP-AIR
Type 2
AN ATTACHMENT
BARRING GP
BARRING & MOUNTING GP
227-9507 BARRING & MOUNTING GP
227-9507 BARRING & MOUNTING GP -LH
AN ATTACHMENT
BARRING & MOUNTING GP
257-2143 BARRING & MOUNTING GP
257-2143 BARRING & MOUNTING GP -RH
AN ATTACHMENT
BARRING GP
253-2468 BARRING GP
253-2468 BARRING GP -RH
AN ATTACHMENT
BARRING GP
5R-7425 BARRING GP
5R-7425 BARRING GP -LH
AN ATTACHMENT
CAMSHAFT GP
CAMSHAFT GP
141-9178 CAMSHAFT GP
141-9178 CAMSHAFT GP
S/N GET1-99999
CRANKSHAFT GP
CRANKSHAFT GP
151-2596 CRANKSHAFT GP
151-2596 CRANKSHAFT GP
S/N GET1-114
CRANKSHAFT GP
246-1552 CRANKSHAFT GP
246-1552 CRANKSHAFT GP
S/N GET1-99999
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
S/N GET1-99999
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
190-8836 COVER GP-CYLINDER BLOCK
190-8836 COVER GP-CYLINDER BLOCK -CENTRAL STRUCTURE
S/N GET1-99999
COVER GP-CYLINDER BLOCK
190-8849 COVER GP-CYLINDER BLOCK
190-8849 COVER GP-CYLINDER BLOCK -CENTRAL STRUCTURE
Type 1
CANNOT BE USED WITH ELECTRIC PRELUBRICATION
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
190-8849 COVER GP-CYLINDER BLOCK
190-8849 COVER GP-CYLINDER BLOCK -CENTRAL STRUCTURE
Type 2
CANNOT BE USED WITH ELECTRIC PRELUBRICATION
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
192-3802 COVER GP-CYLINDER BLOCK
192-3802 COVER GP-CYLINDER BLOCK -FRONT STURCTURE
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
208-3597 COVER GP-CYLINDER BLOCK
208-3597 COVER GP-CYLINDER BLOCK -FRONT STRUCTURE
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
226-5069 COVER GP-CYLINDER BLOCK
226-5069 COVER GP-CYLINDER BLOCK -CENTRAL STRUCTURE
FOR USE WITH CRANKCASE EXPLOSION RELIEF VALVE
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
226-9291 COVER GP-CYLINDER BLOCK
226-9291 COVER GP-CYLINDER BLOCK -JACKET WATER
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
228-2706 COVER GP-CYLINDER BLOCK
228-2706 COVER GP-CYLINDER BLOCK -REAR
LH MOUNTED
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
228-4735 COVER GP-CYLINDER BLOCK
228-4735 COVER GP-CYLINDER BLOCK -PRELUBRICATION
AN ATTACHMENT
COVER GP-CYLINDER BLOCK
233-9833 COVER GP-CYLINDER BLOCK
233-9833 COVER GP-CYLINDER BLOCK -REAR
LH MOUNTED
AN ATTACHMENT
CYLINDER BLOCK AS
148-4511 CYLINDER BLOCK AS
148-4511 CYLINDER BLOCK AS
PART OF 148-8456, 278-0966 CYLINDER BLOCK GP
FIELD REPLACEMENT ORDER @@@@@353-3972@@@@@, 60- 7N-2046 SEAL-O-RING, 20-211-7826 LINER-CYLINDER BLOCK, 20-352-6061 SEAL-LINER
CYLINDER BLOCK AS
350-1394 CYLINDER BLOCK AS
350-1394 CYLINDER BLOCK AS
PART OF 353-3972 CYLINDER BLOCK GP
CYLINDER BLOCK GP
148-8456 CYLINDER BLOCK GP
148-8456 CYLINDER BLOCK GP
S/N GET1-111
CYLINDER BLOCK GP
148-8456 CYLINDER BLOCK GP
148-8456 CYLINDER BLOCK GP
S/N GET112-UP
CYLINDER BLOCK GP
278-0966 CYLINDER BLOCK GP
278-0966 CYLINDER BLOCK GP
S/N GET115-99999
CYLINDER BLOCK GP
353-3972 CYLINDER BLOCK GP
353-3972 CYLINDER BLOCK GP
FIELD REPLACEMENT FOR @@@@@148-4511@@@@@
FOR USE WITH 339-4950 SEAL-LINER, 8N-4707 BAND-FILLER
VALVE GP-EXPLOSION RELIEF
8N-8510 VALVE GP-EXPLOSION RELIEF
8N-8510 VALVE GP-EXPLOSION RELIEF -CRANKCASE
AN ATTACHMENT
CYLINDER HEAD GP
CYLINDER HEAD GP
206-1563 CYLINDER HEAD GP
206-1563 CYLINDER HEAD GP
PART OF 206-1564 CYLINDER HEAD GP
AN ATTACHMENT
CYLINDER HEAD GP
206-1564 CYLINDER HEAD GP
206-1564 CYLINDER HEAD GP
PART OF 206-1565 CYLINDER HEAD GP
Type 1
AN ATTACHMENT
CYLINDER HEAD GP
206-1564 CYLINDER HEAD GP
206-1564 CYLINDER HEAD GP
PART OF 206-1565 CYLINDER HEAD GP
Type 2
AN ATTACHMENT
CYLINDER HEAD GP
206-1565 CYLINDER HEAD GP
206-1565 CYLINDER HEAD GP
AN ATTACHMENT
DAMPER GP
DAMPER GP
171-4571 DAMPER GP
171-4571 DAMPER GP
PART OF 227-9523 DAMPER GP
AN ATTACHMENT
DAMPER GP
227-9523 DAMPER GP
227-9523 DAMPER GP
FOR USE WITH A FRONT STUB SHAFT
AN ATTACHMENT
GUARD GP-DAMPER
102-8616 GUARD GP-DAMPER
102-8616 GUARD GP-DAMPER
FOR USE WITH FRONT TRUNNION ENGINE MOUNT
AN ATTACHMENT
GUARD GP-DAMPER
203-9448 GUARD GP-DAMPER
203-9448 GUARD GP-DAMPER
CANNOT BE USED WITH ENGINE MOUNTED WATER PUMPS
AN ATTACHMENT
GUARD GP-DAMPER
228-0844 GUARD GP-DAMPER
228-0844 GUARD GP-DAMPER
Type 1
FOR USE WITH A FRONT STUB SHAFT
AN ATTACHMENT
GUARD GP-DAMPER
228-0844 GUARD GP-DAMPER
228-0844 GUARD GP-DAMPER
Type 2
FOR USE WITH A FRONT STUB SHAFT
AN ATTACHMENT
GUARD GP-DAMPER
230-3084 GUARD GP-DAMPER
230-3084 GUARD GP-DAMPER
Type 1
FOR USE WITH A STUB SHAFT
AN ATTACHMENT
GUARD GP-DAMPER
230-3084 GUARD GP-DAMPER
230-3084 GUARD GP-DAMPER
Type 2
FOR USE WITH A STUB SHAFT
AN ATTACHMENT
GUARD GP-DAMPER
232-3841 GUARD GP-DAMPER
232-3841 GUARD GP-DAMPER
Type 1
AN ATTACHMENT
GUARD GP-DAMPER
232-3841 GUARD GP-DAMPER
232-3841 GUARD GP-DAMPER
Type 2
AN ATTACHMENT
GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
8N-9639 GUARD GP-DAMPER
FOR USE WITH FRONT ACCESSORY DRIVE HOUSING
AN ATTACHMENT
DRIVE GP-ACCESSORY
DRIVE GP-ACCESSORY
107-7361 DRIVE GP-ACCESSORY
107-7361 DRIVE GP-ACCESSORY -UPPER, RH
S/N GET1-99999
STANDARD ROTATION
CANNOT BE USED WITH MECHANICAL GOVERNOR
AN ATTACHMENT
DRIVE GP-ACCESSORY
216-7097 DRIVE GP-ACCESSORY
216-7097 DRIVE GP-ACCESSORY -UPPER, RH
AN ATTACHMENT
DRIVE GP-ACCESSORY
7N-4871 DRIVE GP-ACCESSORY
7N-4871 DRIVE GP-ACCESSORY -UPPER, RH
PART OF 216-7097 DRIVE GP-ACCESSORY
FOR USE WITH 900-1800 RPM
CANNOT BE USED WITH RIGHT HAND GOVERNOR
AN ATTACHMENT
DRIVE GP-AUXILIARY
DRIVE GP-AUXILIARY
211-8184 DRIVE GP-AUXILIARY
211-8184 DRIVE GP-AUXILIARY -LOWER, LH
AN ATTACHMENT
DRIVE GP-AUXILIARY
245-6186 DRIVE GP-AUXILIARY
245-6186 DRIVE GP-AUXILIARY -LOWER, LH
AN ATTACHMENT
SHAFT GP-AUXILIARY DRIVE
245-6187 SHAFT GP-AUXILIARY DRIVE
245-6187 SHAFT GP-AUXILIARY DRIVE
AN ATTACHMENT
DRIVE GP-FAN
DRIVE GP-FAN
230-2578 DRIVE GP-FAN
230-2578 DRIVE GP-FAN
BASIC,BLOWER
Type 1
AN ATTACHMENT
DRIVE GP-FAN
230-2578 DRIVE GP-FAN
230-2578 DRIVE GP-FAN
BASIC,BLOWER
Type 2
AN ATTACHMENT
DRIVE GP-FAN
7N-7660 DRIVE GP-FAN
7N-7660 DRIVE GP-FAN
LOW KILOWATT
PART OF 7W-5223, 7W-5224, 7W-5225, 7W-5226, 7W-5227, 7W-5232, 7W-5252, 7W-5253, 7W-8138, 7W-8141, 7W-8143, 7W-8144 PULLEY GP-FAN DRIVE
AN ATTACHMENT
FLYWHEEL GP
FLYWHEEL GP
169-3337 FLYWHEEL GP
169-3337 FLYWHEEL GP
Type 1
AN ATTACHMENT
FLYWHEEL GP
169-3337 FLYWHEEL GP
169-3337 FLYWHEEL GP
Type 2
AN ATTACHMENT
FLYWHEEL GP
169-3337 FLYWHEEL GP
169-3337 FLYWHEEL GP
Type 3
AN ATTACHMENT
FLYWHEEL GP
276-8812 FLYWHEEL GP
276-8812 FLYWHEEL GP
PART OF 169-3337 FLYWHEEL GP
AN ATTACHMENT
FLYWHEEL GP
2W-8772 FLYWHEEL GP
2W-8772 FLYWHEEL GP
S/N GET1-114
AN ATTACHMENT
FLYWHEEL GP
2W-8772 FLYWHEEL GP
2W-8772 FLYWHEEL GP
S/N GET115-UP
AN ATTACHMENT
FLYWHEEL GP
471-0883 FLYWHEEL GP
471-0883 FLYWHEEL GP
PART OF 169-3337 FLYWHEEL GP
AN ATTACHMENT
GEAR GP-REAR
112-5674 GEAR GP-REAR
112-5674 GEAR GP-REAR
S/N GET1-99999
CAM DRIVE
GEAR GP
COVER GP-GEAR INSPECTION
191-8721 COVER GP-GEAR INSPECTION
191-8721 COVER GP-GEAR INSPECTION -FRONT STRUCTURE
CANNOT BE USED WITH SEPARATE CIRCUIT AFTERCOOLER PUMP
AN ATTACHMENT
GEAR GP-FRONT
155-8502 GEAR GP-FRONT
155-8502 GEAR GP-FRONT
PART OF 191-0169 COOLING AR
FOR USE WITH 1500-RPM STANDARD ROTATION ENGINE
AN ATTACHMENT
GEAR GP-FRONT
278-1348 GEAR GP-FRONT
278-1348 GEAR GP-FRONT
PART OF 191-0169 COOLING AR
AN ATTACHMENT
GEAR GP-REAR
112-5674 GEAR GP-REAR
112-5674 GEAR GP-REAR
S/N GET1-99999
CAM DRIVE
HOUSING GP-FRONT
190-4871 HOUSING GP-FRONT
190-4871 HOUSING GP-FRONT
S/N GET1-99999
GUARD GP-BELT
GUARD AS-BELT
241-6893 GUARD AS-BELT
241-6893 GUARD AS-BELT
PART OF 245-4411 GUARD GP-BELT
AN ATTACHMENT
GUARD GP-BELT
151-9228 GUARD GP-BELT
151-9228 GUARD GP-BELT -ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
231-8904 GUARD GP-BELT
231-8904 GUARD GP-BELT -ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
233-8361 GUARD GP-BELT
233-8361 GUARD GP-BELT -FAN DRIVE
AN ATTACHMENT
GUARD GP-BELT
245-4411 GUARD GP-BELT
245-4411 GUARD GP-BELT -FAN DRIVE
AN ATTACHMENT
GUARD GP-BELT
307-1569 GUARD GP-BELT
307-1569 GUARD GP-BELT -ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
7W-5780 GUARD GP-BELT
7W-5780 GUARD GP-BELT -ALTERNATOR
Type 1
AN ATTACHMENT
GUARD GP-BELT
7W-5780 GUARD GP-BELT
7W-5780 GUARD GP-BELT -ALTERNATOR
Type 2
AN ATTACHMENT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
191-2997 COVER GP-FLYWHEEL HOUSING
191-2997 COVER GP-FLYWHEEL HOUSING
AN ATTACHMENT
COVER GP-REAR HOUSING
191-6517 COVER GP-REAR HOUSING
191-6517 COVER GP-REAR HOUSING -RH
AN ATTACHMENT
HOUSING GP-FLYWHEEL
190-4872 HOUSING GP-FLYWHEEL
190-4872 HOUSING GP-FLYWHEEL
S/N GET1-99999
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
234-0286 COVER GP-FRONT HOUSING
234-0286 COVER GP-FRONT HOUSING
AN ATTACHMENT
GEAR GP-FRONT
155-8502 GEAR GP-FRONT
155-8502 GEAR GP-FRONT
PART OF 191-0169 COOLING AR
FOR USE WITH 1500-RPM STANDARD ROTATION ENGINE
AN ATTACHMENT
GEAR GP-FRONT
278-1348 GEAR GP-FRONT
278-1348 GEAR GP-FRONT
PART OF 191-0169 COOLING AR
AN ATTACHMENT
HOUSING GP-FRONT
190-4871 HOUSING GP-FRONT
190-4871 HOUSING GP-FRONT
S/N GET1-99999
LIFTING GP-ENGINE
LIFTING GP-ENGINE
192-1417 LIFTING GP-ENGINE
192-1417 LIFTING GP-ENGINE
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
210-1228 MOUNTING GP-ALTERNATOR
210-1228 MOUNTING GP-ALTERNATOR
PART OF 234-1891 ALTERNATOR GP-CHARGING
Type 1
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
210-1228 MOUNTING GP-ALTERNATOR
210-1228 MOUNTING GP-ALTERNATOR
PART OF 234-1891 ALTERNATOR GP-CHARGING
Type 2
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
7E-4836 MOUNTING GP-ALTERNATOR
7E-4836 MOUNTING GP-ALTERNATOR
S/N GET1-114
AN ATTACHMENT
MOUNTING GP-ALTERNATOR
7E-4836 MOUNTING GP-ALTERNATOR
7E-4836 MOUNTING GP-ALTERNATOR
S/N GET115-UP
AN ATTACHMENT
PAN GP-OIL
COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
2W-5616 COVER GP-OIL PAN
AN ATTACHMENT
DRAIN GP-ENGINE OIL
190-8843 DRAIN GP-ENGINE OIL
190-8843 DRAIN GP-ENGINE OIL
AN ATTACHMENT
DRAIN GP-ENGINE OIL
245-8111 DRAIN GP-ENGINE OIL
245-8111 DRAIN GP-ENGINE OIL
AN ATTACHMENT
FASTENER GP-OIL PAN
190-8839 FASTENER GP-OIL PAN
190-8839 FASTENER GP-OIL PAN
CANNOT BE USED WITH OIL LEVEL REGULATOR
AN ATTACHMENT
PAN GP-OIL
151-2723 PAN GP-OIL
151-2723 PAN GP-OIL
S/N GET1-114
PART OF 151-2724 PAN GP-OIL
ALSO AN ATTACHMENT
PAN GP-OIL
151-2724 PAN GP-OIL
151-2724 PAN GP-OIL
S/N GET1-111
ALSO AN ATTACHMENT
PAN GP-OIL
233-9777 PAN GP-OIL
233-9777 PAN GP-OIL
PART OF 233-9778 PAN GP-OIL
AN ATTACHMENT
PAN GP-OIL
233-9778 PAN GP-OIL
233-9778 PAN GP-OIL
FOR USE WITH 1.5-INCH DRAIN
AN ATTACHMENT
PLUG GP-OIL PAN
190-8842 PLUG GP-OIL PAN
190-8842 PLUG GP-OIL PAN
FOR USE WITH ENGINES WITHOUT A MANUAL OIL SUMP
AN ATTACHMENT
PLUG GP-OIL PAN
190-8844 PLUG GP-OIL PAN
190-8844 PLUG GP-OIL PAN
CANNOT BE USED WITH AN OIL DRAIN GROUP
AN ATTACHMENT
PARTS GP-MISCELLANEOUS
COVER GP-ENGINE
245-7336 COVER GP-ENGINE
245-7336 COVER GP-ENGINE
FOR USE WITH MANUAL PRELUBRICATION PUMP
AN ATTACHMENT
PISTON & ROD GP
CONNECTING ROD GP
190-3936 CONNECTING ROD GP
190-3936 CONNECTING ROD GP
S/N GET1-99999
224-6204 PISTON GP
224-6204 PISTON GP
AN ATTACHMENT
PISTON GP
226-3825 PISTON GP
226-3825 PISTON GP
PART OF 224-6204 PISTON GP
AN ATTACHMENT
PULLEY GP
PULLEY AS-CRANKSHAFT
7N-4106 PULLEY AS-CRANKSHAFT
7N-4106 PULLEY AS-CRANKSHAFT
196.85-MM DIAMETER (7.75-IN)
FOR USE WITH LOW KW STUB SHAFT GP
AN ATTACHMENT
PULLEY AS-CRANKSHAFT
8N-6564 PULLEY AS-CRANKSHAFT
8N-6564 PULLEY AS-CRANKSHAFT
247.65-MM DIAMETER (9.75-IN)
FOR USE WITH LOW KW STUB SHAFT GP
AN ATTACHMENT
PULLEY GP-AUXILIARY DRIVE
245-6529 PULLEY GP-AUXILIARY DRIVE
245-6529 PULLEY GP-AUXILIARY DRIVE
LOWER, LH, FRONT
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-5223 PULLEY GP-FAN DRIVE
7W-5223 PULLEY GP-FAN DRIVE
0.520 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-5224 PULLEY GP-FAN DRIVE
7W-5224 PULLEY GP-FAN DRIVE
0.428 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-5225 PULLEY GP-FAN DRIVE
7W-5225 PULLEY GP-FAN DRIVE
0.627 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-5226 PULLEY GP-FAN DRIVE
7W-5226 PULLEY GP-FAN DRIVE
0.704 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-5227 PULLEY GP-FAN DRIVE
7W-5227 PULLEY GP-FAN DRIVE
0.605 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-5230 PULLEY GP-FAN DRIVE
7W-5230 PULLEY GP-FAN DRIVE
0.923 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-5232 PULLEY GP-FAN DRIVE
7W-5232 PULLEY GP-FAN DRIVE
0.770 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-5252 PULLEY GP-FAN DRIVE
7W-5252 PULLEY GP-FAN DRIVE
0.630 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-5253 PULLEY GP-FAN DRIVE
7W-5253 PULLEY GP-FAN DRIVE
0.751 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-8138 PULLEY GP-FAN DRIVE
7W-8138 PULLEY GP-FAN DRIVE
0.339 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-8141 PULLEY GP-FAN DRIVE
7W-8141 PULLEY GP-FAN DRIVE
0.372 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-8143 PULLEY GP-FAN DRIVE
7W-8143 PULLEY GP-FAN DRIVE
0.556 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
PULLEY GP-FAN DRIVE
7W-8144 PULLEY GP-FAN DRIVE
7W-8144 PULLEY GP-FAN DRIVE
0.455 RATIO
FOR USE WITH ENGINE MOUNTED FAN
AN ATTACHMENT
SHAFT GP-STUB
SHAFT GP-STUB
150-7947 SHAFT GP-STUB
150-7947 SHAFT GP-STUB
AN ATTACHMENT
SERPENTINE/V-BELTS
GUARD AS-BELT
241-6893 GUARD AS-BELT
241-6893 GUARD AS-BELT
PART OF 245-4411 GUARD GP-BELT
AN ATTACHMENT
GUARD GP-BELT
151-9228 GUARD GP-BELT
151-9228 GUARD GP-BELT -ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
231-8904 GUARD GP-BELT
231-8904 GUARD GP-BELT -ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
233-8361 GUARD GP-BELT
233-8361 GUARD GP-BELT -FAN DRIVE
AN ATTACHMENT
GUARD GP-BELT
245-4411 GUARD GP-BELT
245-4411 GUARD GP-BELT -FAN DRIVE
AN ATTACHMENT
GUARD GP-BELT
307-1569 GUARD GP-BELT
307-1569 GUARD GP-BELT -ALTERNATOR
AN ATTACHMENT
GUARD GP-BELT
7W-5780 GUARD GP-BELT
7W-5780 GUARD GP-BELT -ALTERNATOR
Type 1
AN ATTACHMENT
GUARD GP-BELT
7W-5780 GUARD GP-BELT
7W-5780 GUARD GP-BELT -ALTERNATOR
Type 2
AN ATTACHMENT
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
4P-8310 COVER GP-VALVE MECHANISM
4P-8310 COVER GP-VALVE MECHANISM
S/N GET1-99999
VALVE MECHANISM GP
1W-8465 VALVE MECHANISM GP
1W-8465 VALVE MECHANISM GP
S/N GET1-99999
COVER GP-ENGINE
COVER GP-ACCESS
228-3281 COVER GP-ACCESS
228-3281 COVER GP-ACCESS
AN ATTACHMENT
COVER GP-ACCESS
281-0800 COVER GP-ACCESS
281-0800 COVER GP-ACCESS -REAR STRUCTURE
AN ATTACHMENT

Information:

(For parts list, see above)

Engine News
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/01
New Couplings Are Used for the Compressor Bypass on Some G3500 Engines {1803, 5510}
2011/02/17
Specifications
Belt Tension Chart
G3500B Engines
Engine News
Reminder for Troubleshooting Electronic Actuators {1130}
2013/08/21
New Cover Seals are Available {1107, 1201, 1210}
2007/03/26
Procedure for Installing the Camshaft Drive Gear {1212}
2005/12/12
Specifications
Camshaft Bearing Position
G3500B Engines
Camshaft
G3500B Engines
Systems Operation
Camshaft
G3500B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3500B Engines
Camshaft Timing
G3500B Engines
Operation and Maintenance Manual
Driven Equipment - Inspect/Replace/Lubricate
G3500B Engines
Driven Equipment - Check
G3500B Engines
Reuse And Salvage Guidelines
Inspection of the Coupling Assembly for 3524 Engines {3279}
Inspection of the Coupling Assembly for 3524 Engines {3279}
Engine News
A New Crankshaft Is Used {1202}
2008/09/15
Important Notice on Installation of Crankshaft Seals and Wear Sleeves {1160, 1161}
2009/02/23
New Front and Rear Crankshaft Seals Are Now Used on Certain 3500 and G3500 Engines {1160, 1161}
2015/02/20
Cat<SUP>&reg;</SUP> Reman Now Offers Upgrade to New Crankshafts for Certain Engines {1202}
2014/10/03
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3500B Engines
Special Instruction
Proper Plugging of the 315-1391 Crankshaft {1202}
Proper Plugging of the 315-1391 Crankshaft {1202}
Technical Information Bulletin
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Incorrectly Marked Crankshaft Counterweights on 3500 Engines and on G3500 Engines{1202}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Crankshaft Seal May Fail and Leak Oil on All 3500 and G3500 Engines {1000, 1160, 1161, 7555}
Specifications
Crankshaft Wear Sleeves and Seals
G3500B Engines
Connecting Rod and Main Bearing Journals
G3500B Engines
Crankshaft
G3500B Engines
Systems Operation
Crankshaft - 20 Cylinders
G3500B Engines
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3500B Engines
Crankshaft Position for Valve Lash Setting
G3500B Engines
Service Magazine
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
2015/07/23
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
New Preservation Process for Crankshafts is Now Used for 3500, G3500, and C175-16 Series Engines {1202}
Engine News
New Cover Seals are Available {1107, 1201, 1210}
2007/03/26
The Cylinder Block Has Changed {1201}
2003/10/01
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {1201, 1216}
2011/07/29
A New Oversized Cylinder Bore Liner Seal Insert Is Available for 3500 Engine Cylinder Block Salvage {1201, 7555}
2013/08/21
An Improved Inspection Process for Cylinder Liners Used in All 3500 Engines {1201, 1216}
2014/07/07
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Engines {0705, 1201, 1217}
2014/12/05
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Operation and Maintenance Manual
Cylinder Pressure - Measure/Record
G3500B Engines
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Use of the 352-6061 Liner Seal and the 8N-4707 Filler Band {1201, 1201, 7555}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Technical Information Bulletin
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Documenting the Date Codes of the Bearings for 3500 and G3600 Engines{1202, 1225}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Cylinder Liner Serial Number Inspection on All 3500 Engines{1201, 1216}
Specifications
Cylinder Liner
G3500B Engines
Cylinder Block
G3500B Engines
Piston and Rings
G3500B Engines
Connecting Rod
G3500B Engines
Systems Operation
Cylinder Block, Liners and Heads
G3500B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Reuse and Salvage for 3500 Engine Cylinder Blocks {0672, 0705, 0762, 1201, 1217}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3500B Engines
Cylinder Liner Projection
G3500B Engines
Cylinder Block
G3500B Engines
Service Magazine
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
An Improved Process Is Used To Install Water Ferrule Inserts In All 3500 Machine Engines {0705, 1201, 1217}
2014/12/05
Engine News
New Water Seals Provide Increased Stability At Higher Temperatures {1100, 1124}
2010/10/06
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New Cylinder Head Gasket is Used {1124}
2006/07/24
New Exhaust Valves Are Used in G3500 and G3500B Engines {1105}
2012/10/24
New Exhaust Valves Are Used in Diesel 3500 Commercial Engines {1100, 1105}
2013/12/10
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Remanufactured Cylinder Heads for 3500 and G3500 Engines {1100}
2015/05/01
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
Operation and Maintenance Manual
Valve Stem Projection - Measure/Record
G3500B Engines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
Testing for Excessive Cylinder Blowby in 3500 Engines{1000, 1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
New Cylinder Head and Head Gasket Leak Test Procedure Available for 3500 Engines {1100, 1223}
Technical Information Bulletin
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Broken Bolt Survey for all 3500 Engines{1100, 7553}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Incorrect Substitution of the 12 Point Cylinder Head Bolt on all G3500 and 3500 Engines {1100}
Specifications
Cylinder Head
G3500B Engines
Cylinder Head Valves
G3500B Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Systems Operation
Valve System Components
G3500B Engines
Cylinder Block, Liners and Heads
G3500B Engines
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
PRODUCT LINE ADDITIONS: REMANUFACTURED G3500 CYLINDER HEADS
PRODUCT LINE ADDITIONS: REMANUFACTURED G3500 CYLINDER HEADS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
G3500B Engines
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3500B Engines
Technical Information Bulletin
Damper Fluid Kits Are not Available Outside of the United States {1205}
Damper Fluid Kits Are not Available Outside of the United States {1205}
Specifications
Vibration Damper Guard
G3500B Engines
Vibration Damper
G3500B Engines
Vibration Damper Guard
G3500B Engines
Vibration Damper
G3500B Engines
Vibration Damper Guard
G3500B Engines
Vibration Damper Guard
G3500B Engines
Vibration Damper
G3500B Engines
Vibration Damper
G3500B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
G3500B Engines
Engine News
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2010/01/18
Specifications
Accessory Drive (Upper Right Hand)
G3500B Engines
Engine News
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
New Seal for the Front Housing {1151, 1207}
2004/06/01
Specifications
Auxiliary Drive (Lower Left Hand)
G3500B Engines
Auxiliary Drive (Lower Left Hand)
G3500B Engines
Engine News
Improved Fan Drives are Used {1359}
2007/03/05
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
2014/01/31
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
Reuse And Salvage Guidelines
Specifications for Reusability of the <NOBR>251-7646</NOBR> Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
Specifications for Reusability of the 251-7646 Fan Drive Bracket Assembly on 3500 Machine Engines {1359}
Engine News
Proper Storage Procedures Are Available For Commercial Engines {1000}
Proper Storage Procedures Are Available For Commercial Engines {1000}
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
General Troubleshooting Guidelines For Nitrite Levels For Certain Gas Engines {0769, 1000, 1352, 1395}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Engine News
New Flywheels Are Used {1156}
2003/08/01
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
The Flywheel Groups have Changed {1156}
2006/07/10
Technical Information Bulletin
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Specifications
Flywheel
G3500B Engines
Flywheel Housing Cover
G3500B Engines
Flywheel
G3500B Engines
Gear Group (Rear)
G3500B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Testing and Adjusting
Flywheel - Inspect
G3500B Engines
Engine News
Rear Gear Groups For Landfill Applications {1204, 1206}
2003/06/01
A New Oil Pump Adapter Assembly is Used {1206, 1313}
2005/10/31
Procedure for Installing the Camshaft Drive Gear {1212}
2005/12/12
New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2010/01/18
Technical Information Bulletin
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Interference between Camshaft Drive Gears and Bolts in the Flywheel Housing in Some 3500 and G3500 Engines{1204}
Specifications
Gear Group (Rear)
G3500B Engines
Gear Group (Front)
G3500B Engines
Gear Group (Front)
G3500B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Engine News
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
Sealing and Installing the Flywheel Housing {1157, 7555}
2006/03/27
Specifications
Flywheel Housing Cover
G3500B Engines
Reuse And Salvage Guidelines
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Thermal Spray Procedures for 3500 Engine - Flywheel Housing {0679, 1157}
Testing and Adjusting
Flywheel Housing - Inspect
G3500B Engines
Engine News
New Seals for the Front Housing {1151, 1207}
2003/10/01
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
New Seal for the Front Housing {1151}
2003/11/01
New Seal for the Front Housing {1151, 1207}
2004/06/01
New O-Ring Seals Are Used on the Front Housings of 3500 Engines {1151, 1162, 1166, 1206, 1207}
2010/01/18
Specifications
Crankshaft Wear Sleeves and Seals
G3500B Engines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Technical Information Bulletin
A Lifting Eye Quality Issue Exists for Certain 3500 Engines {1122}
A Lifting Eye Quality Issue Exists for Certain 3500 Engines {1122}
Engine News
A New Alternator Drive Pulley with an Improved Wear Sleeve is Used {1154, 1405, 1425}
2007/06/04
Operation and Maintenance Manual
Engine Mounts - Check
G3500B Engines
Reuse And Salvage Guidelines
Specifications for the Inspection of Trunnions for Series 3500 Family of Engines {1154}
Specifications for the Inspection of Trunnions for Series 3500 Family of Engines {1154}
Inspection of Rear Engine Mounts on 3500 Family of Engines {1152, 1154}
Inspection of Rear Engine Mounts on 3500 Family of Engines {1152, 1154}
Engine News
New Oil Pans {1302}
2003/10/01
Specifications
Engine Oil Pan
G3500B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for 3500, 3600 & C175 Engine Oil Pans {1302}
Reuse and Salvage for 3500, 3600 & C175 Engine Oil Pans {1302}
Engine News
New Cover Seals are Available {1107, 1201, 1210}
2007/03/26
New Fabricated Tool for Piston Pin Installation {1225}
2003/08/01
New Guidelines for Inspecting Pistons {1214}
2006/01/02
New Procedure for Measuring the Connecting Rod {1218, 1225}
2006/08/14
Special Instruction
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Failure of Some Bearings In 3500 and G3600 Engines{1225}
Failure of Some Bearings In 3500 and G3600 Engines{1225}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Identifying Connecting Rod Bearings and Main Bearings that Must Not Be Used on 3500 and G3600 Engines{1202, 1225, 1230}
Do Not Use Unapproved Connecting Rod 7N-2405 Bolts for 3500 and G3500 Engines{1225, 7553}
Do Not Use Unapproved Connecting Rod 7N-2405 Bolts for 3500 and G3500 Engines{1225, 7553}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Specifications
Piston and Rings
G3500B Engines
Engine Oil Cooler Bypass and Cooling Jet Sequence Valves
G3500B Engines
Connecting Rod
G3500B Engines
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Systems Operation
Pistons, Rings and Connecting Rods
G3500B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER PACKS FOR CERTAIN 3126/B, 3304/B, 3306/B, C9, C12, C13, 3412E, C30, 3512C, 3516C, G3508/B, G3516B, G3520B ENGINE MODELS
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER PACKS FOR CERTAIN 3126/B, 3304/B, 3306/B, C9, C12, C13, 3412E, C30, 3512C, 3516C, G3508/B, G3516B, G3520B ENGINE MODELS
Testing and Adjusting
Excessive Bearing Wear - Inspect
G3500B Engines
Compression
G3500B Engines
Service Magazine
New Copper Lead Main and Connecting Rod Bearings Are Available For All 3500 Diesel Machine Engines {1203, 1219}
2015/07/23
Engine News
New Seal for the Front Housing {1151, 1207}
2004/06/01
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
2014/01/31
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
A New Stub Shaft Is Available for 3500 Commercial Engines {1359}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
G3500B Engines
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Specifications
Stub Shaft (Front)
G3500B Engines
Stub Shaft (Front)
G3500B Engines
Engine News
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
Heavy Duty, Engine Turning Tool Released {0701, 1156, 1157}
2006/03/20
Information on the New Valve Recession Tool Gp that Is Used on All G3500 Commercial Engines {0701, 1105}
2010/04/02
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Calculating Cylinder Liner Projection for 3500, 3500B, 3500C, and G3500 Engines {0705, 1216}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
M0088789: 550-9152 Gage Ring Assembly {0374, 0599, 0700, 0701, 0759, 1100, 1105}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Tools Ease the Removal and the Installation of Main Bearing Caps {0700, 0705}
2004/02/16
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Engine News
An Improved Alternator Belt is Used {1357}
2003/08/01
A New Special Instruction, REHS2259 , "Fabricated Tool for Alternate Method of Tightening Fan Drive Belts" is Available {1357, 1397}
2004/06/01
Operation and Maintenance Manual
Belts - Inspect/Adjust/Replace
G3500B Engines
Special Instruction
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
Fabricated Tool for Alternate Method of Tightening Fan Drive Belts{1357, 1397}
Specifications
Belt Tension Chart
G3500B Engines
Engine News
New Cover Seals are Available {1107, 1201, 1210}
2007/03/26
A New Dowel Improves Lubrication to the Rocker Assembly {1123, 1123}
2003/12/01
Reminder for Troubleshooting Electronic Actuators {1130}
2013/08/21
Information on the New Valve Recession Tool Gp that Is Used on All G3500 Commercial Engines {0701, 1105}
2010/04/02
Importance of Proper Valve Lash Setting {1102, 1121, 1123}
2012/10/04
A New Lifter Assembly Is Used for G3500 Engines {1209}
2013/04/22
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
A New Valve Recession Tool Is Now Available For All G3500 Engines {0374, 0599, 0701, 0703, 1100}
Operation and Maintenance Manual
Engine Valve Lash and Bridge - Adjust
G3500B Engines
Special Instruction
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Parts to Replace in the Event of Hydraulic Lock or Piston to Valve Contact{1000, 1102, 1216, 1225, 1250, 1290}
Specifications
Valve Mechanism
G3500B Engines
Tool Operating Manual
421-1011 Valve Recession Tool Group used on G3500 C, E, &amp; H Engines{0374, 0599, 0701, 0703, 1100}
421-1011 Valve Recession Tool Group used on G3500 C, E, & H Engines{0374, 0599, 0701, 0703, 1100}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Information Release Memo
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
APPEARANCE CHANGE ON REMAN SHORT BLOCKS
Testing and Adjusting
Valve Lash and Valve Bridge Adjustment
G3500B Engines
Crankshaft Position for Valve Lash Setting
G3500B Engines
Finding the Top Center Position for the No. 1 Piston
G3500B Engines
Engine News
Improved Alternator Drive Assemblies, Auxiliary Drive Pulley Groups and Accessory Drive Groups {1151, 1207, 1425}
2003/10/01
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.