237-0963 ELECTRONICS GP-MONITOR S/N K5K1-UP PART OF 290-8110 CONVERSION AR-MACHINE 950H WHEEL LOADER

Part No	Qty	Parts name
326-4287	[1]	SOFTWARE GP-MONITOR (PAYLOAD CONTROL SYSTEM)
		-OR-
326-4288	[1]	SERVICE GP-MONITOR
		(OPTIONAL SERVICE REPLACEMENT)(INCLUDES CONTROL GP & SOFTWARE)

#SEBP38660273

330-5365: ELECTRONICS GP-MONITOR

ELECTRONICS GP-MONITOR

330-5365 ELECTRONICS GP-MONITOR
S/N K5K1-UP
FOR USE WITH @@@@@328-6130@@@@@

i03469841 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
329-9915	[1]	SOFTWARE GP-MONITOR (PAYLOAD CONTROL SYSTEM)
		-OR-
329-9916	[1]	SERVICE GP-MONITOR
		(OPTIONAL SERVICE REPLACEMENT)(INCLUDES CONTROL GP & SOFTWARE)

#SEBP38660274

236-8995: ELECTRONICS GP-POWER TRAIN

ELECTRONICS GP-POWER TRAIN

236-8995 ELECTRONICS GP-POWER TRAIN
S/N K5K1-UP
PART OF 237-0235 ELECTRICAL AR

i02205065 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	549-5128	[1]	SOFTWARE GP-POWER TRAIN

#SEBP38660275

324-0703: FASTENER GP-WIRING HARNESS

FASTENER GP-WIRING HARNESS

324-0703 FASTENER GP-WIRING HARNESS -TRANSMISSION
S/N K5K2798-UP
PART OF 324-0692 WIRING GP-CHASSIS

i03552360 SEBP3866

3240703 FASTENER GP-WIRING HARNESS Parts scheme

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7K-1181	[1]	STRAP-CABLE
2.	154-6626	[1]	BRACKET AS
	8T-3490 M	[1]	NUT-WELD (M10X1.5-THD)
3.	193-3973	[1]	STRAP-CABLE
4.	204-8000	[1]	MOUNTING-CABLE TIE
5.	4P-7581	[1]	CLIP (LADDER)
6.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
7.	8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
8.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
9.	8T-4186 M	[1]	BOLT (M10X1.5X40-MM)
10.	9M-8406	[4]	CLIP (LOOP)
	M		METRIC PART

#SEBP38660276

358-2365: HARNESS AS-CAB

HARNESS AS-CAB

358-2365 HARNESS AS-CAB -MAIN CAB
S/N K5K2188-UP
PART OF 237-4910 WIRING GP-CAB

i04933414 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
102-8806	[1]	KIT-RECEPTACLE (8-PIN)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(EACH KIT INCLUDES RECEPTACLE AS & WEDGE)
3S-2093	[8]	STRAP-CABLE
3T-3157	[4]	TERMINAL-BLADE (16-GA TO 20-GA)
3T-3158	[4]	SOCKET-LAMP
3T-3159	[4]	SPRING
3T-3278	[4]	BOOT
6D-4161	[4]	CONTACT
6V-0491	[4]	TERMINAL-BLADE (14-GA TO 18-GA)
6V-5817 D		CONDUIT-FLEXIBLE (26.1-MM ID, SPLIT)(5-M)
7G-7917	[1]	PLUG-SEAL
7G-7918	[1]	PLUG-SEAL
7G-7919	[1]	PLUG-SEAL
8N-1532	[1]	RECEPTACLE AS-CONNECTOR (6-PIN)
8N-1536	[1]	NUT (1-5/8-18-THD)
8N-1535	[1]	BELL AS-END
8N-1537	[1]	LOCKWASHER
8N-1540	[2]	PIN-CONNECTOR (12-GA TO 14-GA)
8N-1542	[1]	PIN-CONNECTOR (10-GA)
8N-1548	[1]	PIN-CONNECTOR (4-GA)
8T-8737	[239]	PLUG-SEAL
8T-9834	[1]	PLUG AS-CONNECTOR (40-PIN)
3E-4367	[1]	RING-RETAINING
3E-8557 M	[1]	BOLT (M5X0.8X39.37-MM)
9X-3132	[2]	SEAL-CONNECTOR (40-PIN)
9R-9806	[2]	TERMINAL-BLADE (18-GA TO 20-GA)
9W-2033	[29]	TERMINAL-BLADE (14-GA TO 16-GA)
9X-0145	[1]	RECEPTACLE AS-CONNECTOR (24-PIN)
9X-1054	[3]	PLUG AS-CONNECTOR (4-PIN)
9X-1056	[12]	TERMINAL-RECEPTACLE (14-GA TO 16-GA)
7K-1181	[1]	STRAP-CABLE
100-5041	[8]	TERMINAL-RECEPTACLE (18-GA TO 20-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)
123-7615	[2]	CONNECTOR (1-PIN)
124-8821	[2]	TERMINAL-BLADE (18-GA TO 22-GA)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(355-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(125-CM)
9X-3402	[367]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[367]	SOCKET-CONNECTOR (14-GA TO 16-GA)
126-1774	[4]	COVER-CONNECTOR
9G-4343	[1]	TERMINAL-RING (4-GA, 1/4-IN SCREW)
2L-8066	[2]	TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW)
2L-8067	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/4-IN SCREW)
2L-8071	[1]	TERMINAL-RING (10-GA TO 12-GA, 1/2-IN SCREW)
2L-8076	[6]	TERMINAL-RING (14-GA TO 16-GA, NO. 10 SCREW)
5P-2766	[2]	TERMINAL-RING (18-GA TO 22-GA, NO. 6 SCREW)
5P-4571	[2]	TERMINAL-BLADE (14-GA TO 16-GA)
2L-8054	[1]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
		-OR-
2L-8061	[1]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
2L-8081	[4]	TERMINAL-RING (14-GA TO 16-GA, 1/2-IN SCREW)
9X-3401	[126]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[126]	PIN-CONNECTOR (14-GA TO 16-GA)
147-1445	[2]	PLUG AS-CONNECTOR (70-PIN)
		(EACH INCLUDES)
159-9322	[1]	SEAL-O-RING
147-1446	[2]	PLUG AS-CONNECTOR (70-PIN)
		(EACH INCLUDES)
159-9322	[1]	SEAL-O-RING
155-2255	[6]	KIT-CONNECTING PLUG (12-PIN)
155-2265	[5]	KIT-CONNECTING PLUG (8-PIN)
155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
155-2271	[6]	KIT-CONNECTING PLUG (4-PIN)
155-2274	[13]	KIT-CONNECTING PLUG (6-PIN)
		(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
155-2260	[7]	KIT-CONNECTING PLUG (3-PIN)
		(EACH KIT INCLUDES PLUG AS, WEDGES & INTERFACE SEAL)
1P-0810	[1]	TAPE-ELECTRICAL
183-5785	[1]	RECEPTACLE AS (40-PIN)
185-1861	[119]	SEAL-WIRE
188-6253	[1]	BLOCK GP-JUNCTION
1H-3244	[2]	LOCKWASHER
6V-8185	[2]	NUT (1/4-20-THD)
8T-4205	[2]	WASHER-HARD (7.2X14.5X2-MM THK)
151-1398	[4]	KIT-TERMINAL (LOCK)
199-6592	[1]	BLOCK AS-FUSE (32-POLE)
200-8789	[1]	SEAL
197-7565	[1]	KIT-RECEPTACLE (4-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
204-1297	[93]	TERMINAL AS-BLADE (18-GA TO 20-GA)
214-4208	[1]	RECEPTACLE AS-CONNECTOR (70-PIN)
245-7434	[20]	KIT-CONNECTING PLUG (10-PIN)
		(EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
230-4013	[1]	PLUG AS-CONNECTOR (3-PIN)
264-7030	[1]	SEAL-CONNECTOR
246-9371	[2]	COVER-RELAY
	[4]	PLATE
274-3775	[1]	CAP-CONNECTOR
274-3776	[2]	CAP-SEAL
274-3777	[4]	CAP-CONNECTOR
274-3778	[1]	CAP-SEAL
274-3779	[1]	CAP-SEAL
329-3734 E		TAPE-ELECTRICAL (514-CM)
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER
M		METRIC PART

#SEBP38660277

540-3761: HARNESS AS-CHASSIS

HARNESS AS-CHASSIS

540-3761 HARNESS AS-CHASSIS
S/N K5K1-UP
PART OF 543-1963 INSTALLATION AR-FIELD, 562-1555 INSTALLATION GP-COMMUNICATION

i07593156 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8804	[1]	KIT-RECEPTACLE (4-PIN)
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
102-8801	[2]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
6V-2689 D		TUBE-HEAT SHRINK (6.35-MM DIA)(0.5-M)
8T-8737	[19]	PLUG-SEAL
9X-3401	[37]	PIN-CONNECTOR (16-GA TO 18-GA)
9X-3402	[46]	SOCKET-CONNECTOR (16-GA TO 18-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(14-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(61-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(27-CM)
134-2540	[2]	RECEPTACLE AS-CONNECTOR (3-PIN)
155-2265	[2]	KIT-CONNECTING PLUG (8-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
155-2260	[4]	KIT-CONNECTING PLUG (3-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE(S), & INTERFACE SEAL)
190-7614	[1]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
230-5010	[1]	PLUG AS-CONNECTOR (6-PIN)
455-0707	[1]	SEAL-CONNECTOR
237-0165	[1]	KIT-CONNECTING PLUG (8-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
274-3775	[2]	CAP-CONNECTOR
274-3778	[2]	CAP-SEAL
274-3783	[1]	CAP-SEAL
329-3734 B		TAPE-ELECTRICAL
344-7617	[1]	RECEPTACLE AS
344-7618	[1]	COVER-SEAL
451-8019	[1]	RECEPTACLE AS-CONNECTOR (14-PIN)
451-8020	[1]	PLUG AS-CONNECTOR (14-PIN)
483-2761	[1]	PLUG AS-CONNECTOR (44-PIN)
483-2762	[1]	PLUG AS-CONNECTOR (44-PIN)
483-2763	[1]	PLUG AS-CONNECTOR (44-PIN)
483-2765	[16]	TERMINAL AS (20-GA)
483-2767	[30]	TERMINAL AS (18-GA)
483-2768	[86]	PLUG-SEAL
490-0571	[2]	PLUG AS-CONNECTOR (2-PIN)
505-7639	[2]	RECEPTACLE AS-CONNECTOR
		(EACH INCLUDES)
490-0572	[1]	RECEPTACLE AS (2-PIN)
490-0589	[2]	PLUG-SEAL
B		USE AS REQUIRED
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER

#SEBP38660278

276-0031: HARNESS AS-CONTROL

HARNESS AS-CONTROL

276-0031 HARNESS AS-CONTROL
S/N K5K1-UP
PART OF 379-3953 INSTALLATION GP-COMMUNICATION

i05669283 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
8T-8737	[58]	PLUG-SEAL
9X-6772	[2]	STRAP-CABLE
125-7874 D		TUBE-HEAT SHRINK (5.72-MM DIA)(20-CM)
9X-3402	[25]	SOCKET-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1768	[25]	SOCKET-CONNECTOR (14-GA TO 16-GA)
126-1774	[1]	COVER-CONNECTOR
131-1504	[1]	TERMINAL AS
2L-8077	[1]	TERMINAL-RING (14-GA TO 16-GA, 1/4-IN SCREW)
125-7874 D		TUBE-HEAT SHRINK (5.72-MM DIA)(3-CM)
9X-3401	[11]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[11]	PIN-CONNECTOR (14-GA TO 16-GA)
155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
		(INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
160-7690	[1]	PLUG AS-CONNECTOR (70-PIN)
159-9322	[1]	SEAL-O-RING
D		ORDER BY THE METER

#SEBP38660279

198-2713: HARNESS AS-ENGINE

HARNESS AS-ENGINE

198-2713 HARNESS AS-ENGINE
S/N KHX1-17463
PART OF 198-2714 WIRING GP-ENGINE

i04896601 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
211-6807	[1]	COVER-CONNECTOR
1S-9593	[2]	STRAP-CABLE
155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
155-2270	[5]	KIT-CONNECTING PLUG (2-PIN)
155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL)
3E-3371	[1]	WEDGE-RECEPTACLE LOCK (3-PIN)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
102-8803	[1]	KIT-RECEPTACLE (3-PIN)
102-8801	[1]	KIT-RECEPTACLE (12-PIN)
		(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
9X-3401	[15]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[15]	PIN-CONNECTOR (14-GA TO 16-GA)
111-2416	[1]	PLUG AS-CONNECTOR (2-PIN)
100-3320	[1]	PLUG AS-CONNECTOR (2-PIN)
		(EACH PLUG AS INCLUDES)
126-5011	[1]	SEAL-CONNECTOR
227-4002	[1]	PLUG AS-CONNECTOR (108-PIN)
8T-8737	[12]	PLUG-SEAL
264-5732	[1]	PLUG AS-CONNECTOR (120-PIN)
288-7324		SEAL-CONNECTOR
8T-8737	[77]	PLUG-SEAL
305-5362	[4]	TERMINAL AS (18-GA)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(33-CM)
125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM)
155-2259	[1]	WEDGE-PLUG LOCK (8-PIN)
194-5226	[60]	WIRE AS (16-GA)
		-OR-
194-5227	[60]	WIRE AS (14-GA)
E		ORDER BY THE CENTIMETER