ELECTRICAL AND STARTING SYSTEM
SENSOR GPELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP38660370
543-3357: SENSOR & MTG GP-LIFT POSITION
543-3357 SENSOR & MTG GP-LIFT POSITION
S/N K5K1-UP
PAYLOAD
PART OF 544-1510 SENSOR GP-POSITION
S/N K5K1-UP
PAYLOAD
PART OF 544-1510 SENSOR GP-POSITION
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 266-2337 Y | [1] | SENSOR GP-POSITION (ROTARY) | ||
| 7X-2560 M | [1] | BOLT (M16X2X220-MM) | ||
| 8T-4137 M | [5] | BOLT (M10X1.5X20-MM) | ||
| 8T-4971 M | [2] | BOLT (M6X1X30-MM) | ||
| 8T-6912 M | [5] | BOLT (M8X1.25X50-MM) | ||
| 384-4031 | [1] | BRACKET AS | ||
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 130-5300 | [1] | CLIP | ||
| 366-8856 J | HARNESS AS-WIRING (60-DM) | |||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 8T-4132 M | [1] | NUT (M16X2-THD) | ||
| 344-5674 M | [5] | NUT (M8X1.25-THD) | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 249-4134 | [1] | PLATE | ||
| 381-6366 | [1] | PLATE | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7K-1181 | [26] | STRAP-CABLE | ||
| 7X-7729 | [2] | WASHER (11X25X3-MM THK) | ||
| 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | ||
| 8T-4121 | [3] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4224 | [10] | WASHER-HARD (8.8X16X2-MM THK) | ||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38660371
239-4850: SENSOR & MTG GP-PRESSURE
239-4850 SENSOR & MTG GP-PRESSURE -LIFT CYLINDER OIL
S/N K5K1-UP
PART OF 244-3253, 263-5255, 283-5021 CONTROL AR-AUTODIG, 244-4478, 328-6130 MONITOR AR-PAYLOAD
S/N K5K1-UP
PART OF 244-3253, 263-5255, 283-5021 CONTROL AR-AUTODIG, 244-4478, 328-6130 MONITOR AR-PAYLOAD
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 5I-4376 | [1] | FITTING | |
| 2. | 6V-0852 | [1] | CAP-DUST | |
| 3. | 164-6871 | [1] | ADAPTER AS | |
| 6V-8397 | [1] | SEAL-O-RING | ||
| 4. | 221-3416 Y | [1] | SENSOR GP-PRESSURE (LIFT CYLINDER OIL) | |
| 5. | 164-5567 | [1] | COUPLER AS-QUICK DISCONNECT (MALE) | |
| 3J-1907 | [1] | SEAL-O-RING | ||
| 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | ||
| 6. | 3J-1907 | [1] | SEAL-O-RING | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38660372
561-1042: SENSOR & MTG GP-PRESSURE
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 5P-8874 | [1] | ADAPTER | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 237-0227 | [2] | PLUG AS-CONNECTOR (3-PIN) | ||
| (EACH INCLUDES) | ||||
| 455-0705 | [1] | SEAL-CONNECTOR | ||
| 3J-1907 | [3] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 349-1178 | [2] | SENSOR-PRESSURE (AUTODIG) | ||
| 8T-8730 | [6] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 7K-1181 | [40] | STRAP-CABLE | ||
| 081-5604 | [1] | TEE | ||
| 132-2453 | [1] | UNION | ||
#SEBP38660373
180-0157: SENSOR & MTG GP-TILT POSITION
180-0157 SENSOR & MTG GP-TILT POSITION
S/N K5K1-1810
PART OF 237-0235 ELECTRICAL AR
S/N K5K1-1810
PART OF 237-0235 ELECTRICAL AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7X-7662 | [2] | ROD END | |
| 2. | 130-5300 | [1] | CLIP | |
| 3. | 169-0417 Y | [1] | SENSOR GP-POSITION (TILT) | |
| 4. | 208-3908 | [1] | COVER | |
| 5. | 210-5682 | [1] | ARM AS | |
| 6. | 210-5683 | [1] | COVER AS | |
| 7. | 213-0364 | [1] | BRACKET AS | |
| 8. | 214-3616 | [1] | PLATE | |
| 9. | 214-3617 | [1] | PLATE | |
| 10. | 160-8500 M | [2] | NUT (M8X1.25-THD) | |
| 11. | 4D-7794 | [1] | CLIP | |
| 12. | 5C-7261 M | [5] | NUT (M8X1.25-THD) | |
| 13. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 14. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 15. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 18. | 8T-4189 M | [1] | BOLT (M8X1.25X20-MM) | |
| 19. | 8T-4195 M | [4] | BOLT (M10X1.5X30-MM) | |
| 20. | 8T-4224 | [11] | WASHER-HARD (8.8X16X2-MM THK) | |
| 21. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 22. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38660374
303-2243: SENSOR & MTG GP-TILT POSITION
303-2243 SENSOR & MTG GP-TILT POSITION
S/N K5K1811-2121
PART OF 237-0235 ELECTRICAL AR
S/N K5K1811-2121
PART OF 237-0235 ELECTRICAL AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 113-4339 | [1] | SPACER (10.5X18X21-MM THK) | |
| 2. | 168-6514 | [1] | SPACER (10.74X17.14X50.8-MM THK) | |
| 3. | 169-0417 Y | [1] | SENSOR GP-POSITION (ROTARY) | |
| 4. | 249-4134 | [1] | PLATE | |
| 5. | 249-4135 | [1] | COVER | |
| 6. | 269-7250 | [1] | PLATE | |
| 7. | 275-0529 | [1] | BRACKET AS | |
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 302-5144 | [1] | ARM | |
| 9. | 130-5300 | [1] | CLIP | |
| 10. | 4D-7794 | [1] | CLIP | |
| 11. | 5P-9085 | [1] | CLIP (LOOP) | |
| 12. | 7X-0818 M | [5] | BOLT (M8X1.25X45-MM) | |
| 13. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 14. | 8T-0341 M | [1] | BOLT-SOCKET HEAD (M10X1.5X60-MM) | |
| 15. | 8T-4121 | [6] | WASHER-HARD (11X21X2.5-MM THK) | |
| 16. | 8T-4136 M | [3] | BOLT (M10X1.5X25-MM) | |
| 17. | 8T-4185 M | [1] | BOLT (M10X1.5X50-MM) | |
| 18. | 8T-4195 M | [6] | BOLT (M10X1.5X30-MM) | |
| 19. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 20. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 21. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38660375
303-2243: SENSOR & MTG GP-TILT POSITION
303-2243 SENSOR & MTG GP-TILT POSITION
S/N K5K2122-2442
PART OF 237-0235 ELECTRICAL AR
S/N K5K2122-2442
PART OF 237-0235 ELECTRICAL AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 123-3202 C | [1] | STRAP-CABLE | |
| 2. | 168-6514 | [1] | SPACER (10.74X17.14X50.8-MM THK) | |
| 3. | 169-0417 Y | [1] | SENSOR GP-POSITION (ROTARY) | |
| 4. | 249-4134 | [1] | PLATE | |
| 5. | 249-4135 | [1] | COVER | |
| 6. | 269-7250 | [1] | PLATE | |
| 7. | 275-0529 | [1] | BRACKET AS | |
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 302-5144 | [1] | ARM | |
| 9. | 4D-7794 | [1] | CLIP | |
| 10. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 11. | 8T-0338 CM | [5] | BOLT-SOCKET HEAD (M8X1.25X45-MM) | |
| 12. | 8T-0341 M | [1] | BOLT-SOCKET HEAD (M10X1.5X60-MM) | |
| 13. | 8T-4121 C | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4136 CM | [7] | BOLT (M10X1.5X25-MM) | |
| 15. | 8T-4195 CM | [2] | BOLT (M10X1.5X30-MM) | |
| 16. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 18. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38660376
303-2243: SENSOR & MTG GP-TILT POSITION
303-2243 SENSOR & MTG GP-TILT POSITION
S/N K5K2443-2899
PART OF 237-0235 ELECTRICAL AR
S/N K5K2443-2899
PART OF 237-0235 ELECTRICAL AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 123-3202 | [1] | STRAP-CABLE | |
| 2. | 3J-1877 C | [1] | SPACER (10.7X17.14X37.1-MM THK) | |
| 3. | 169-0417 Y | [1] | SENSOR GP-POSITION (ROTARY) | |
| 4. | 249-4134 | [1] | PLATE | |
| 5. | 329-5087 C | [1] | COVER | |
| 6. | 269-7250 | [1] | PLATE | |
| 7. | 275-0529 | [1] | BRACKET AS | |
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 302-5144 | [1] | ARM | |
| 9. | 4D-7794 | [1] | CLIP | |
| 10. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 11. | 8T-0338 M | [5] | BOLT-SOCKET HEAD (M8X1.25X45-MM) | |
| 12. | 8T-1160 CM | [1] | BOLT-SOCKET HEAD (M10X1.5X50-MM) | |
| 13. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 15. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 16. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 18. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38660377
303-2243: SENSOR & MTG GP-TILT POSITION
303-2243 SENSOR & MTG GP-TILT POSITION
S/N K5K2900-2954
PART OF 237-0235 ELECTRICAL AR
S/N K5K2900-2954
PART OF 237-0235 ELECTRICAL AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 123-3202 | [1] | STRAP-CABLE | |
| 2. | 3J-1877 | [1] | SPACER (10.7X17.14X37.1-MM THK) | |
| 3. | 266-2337 CY | [1] | SENSOR GP-POSITION (ROTARY) | |
| 4. | 249-4134 | [1] | PLATE | |
| 5. | 329-5087 | [1] | COVER | |
| 6. | 269-7250 | [1] | PLATE | |
| 7. | 275-0529 | [1] | BRACKET AS | |
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 302-5144 | [1] | ARM | |
| 9. | 4D-7794 | [1] | CLIP | |
| 10. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 11. | 8T-0338 M | [5] | BOLT-SOCKET HEAD (M8X1.25X45-MM) | |
| 12. | 8T-1160 M | [1] | BOLT-SOCKET HEAD (M10X1.5X50-MM) | |
| 13. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4136 M | [7] | BOLT (M10X1.5X25-MM) | |
| 15. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 16. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 18. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38660378
303-2243: SENSOR & MTG GP-TILT POSITION
303-2243 SENSOR & MTG GP-TILT POSITION
S/N K5K2955-UP
PART OF 237-0235 ELECTRICAL AR
S/N K5K2955-UP
PART OF 237-0235 ELECTRICAL AR
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 123-3202 | [1] | STRAP-CABLE | |
| 2. | 3J-1877 | [1] | SPACER (10.7X17.14X37.1-MM THK) | |
| 3. | 266-2337 Y | [1] | SENSOR GP-POSITION (ROTARY) | |
| 4. | 249-4134 | [1] | PLATE | |
| 5. | 329-5087 | [1] | COVER | |
| 6. | 269-7250 | [1] | PLATE | |
| 7. | 275-0529 | [1] | BRACKET AS | |
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 8. | 353-5192 C | [1] | BRACKET | |
| 9. | 4D-7794 | [1] | CLIP | |
| 10. | 7X-7729 | [4] | WASHER (11X25X3-MM THK) | |
| 11. | 136-4184 CM | [5] | BOLT-SOCKET HEAD (M8X1.25X40-MM) | |
| 12. | 101-7396 M | [1] | BOLT-SOCKET HEAD (M10X1.5X50-MM) | |
| 13. | 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | |
| 14. | 8T-4136 M | [4] | BOLT (M10X1.5X25-MM) | |
| 15. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 16. | 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 8T-4971 M | [2] | BOLT (M6X1X30-MM) | |
| 18. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38660379
543-3422: SENSOR & MTG GP-TILT POSITION
543-3422 SENSOR & MTG GP-TILT POSITION
S/N K5K1-UP
PAYLOAD
PART OF 544-1510 SENSOR GP-POSITION
S/N K5K1-UP
PAYLOAD
PART OF 544-1510 SENSOR GP-POSITION
For full view, you need register
Parts for your 950H WHEEL LOADER:
| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 266-2337 Y | [1] | SENSOR GP-POSITION (ROTARY) | ||
| 549-8932 | [1] | BLOCK | ||
| 8T-4136 M | [6] | BOLT (M10X1.5X25-MM) | ||
| 8T-4195 M | [3] | BOLT (M10X1.5X30-MM) | ||
| 8T-4971 M | [2] | BOLT (M6X1X30-MM) | ||
| 101-7396 M | [1] | BOLT-SOCKET HEAD (M10X1.5X50-MM) | ||
| 136-4184 M | [5] | BOLT-SOCKET HEAD (M8X1.25X40-MM) | ||
| 9R-2613 M | [3] | BOSS-WELD (M10X1.5X25-MM) | ||
| 543-1970 | [1] | BRACKET | ||
| 275-0529 | [1] | BRACKET AS | ||
| 7T-1099 | [1] | LINK | ||
| 8T-3490 M | [5] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [5] | NUT-WELD (M8X1.25-THD) | ||
| 4D-7794 | [1] | CLIP | ||
| 352-3964 | [1] | CLIP (LADDER) | ||
| 329-5087 | [1] | COVER | ||
| 366-8856 J | HARNESS AS-WIRING (60-DM) | |||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 7T-1099 | [6] | LINK | ||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 249-4134 | [1] | PLATE | ||
| 269-7250 | [1] | PLATE | ||
| 8T-8730 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 3J-1877 | [1] | SPACER (10.7X17.14X37.1-MM THK) | ||
| 7K-1181 | [40] | STRAP-CABLE | ||
| 123-3202 | [1] | STRAP-CABLE | ||
| 7X-7729 | [4] | WASHER (11X25X3-MM THK) | ||
| 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | ||
| 8T-4121 | [5] | WASHER-HARD (11X21X2.5-MM THK) | ||
| 8T-4224 | [5] | WASHER-HARD (8.8X16X2-MM THK) | ||
| J | ORDER BY THE DECIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
