291-0040 AXLE AR-FIXED -FRONT, LIMITED SLIP DIFF S/N K5K1-2875 950H WHEEL LOADER

Part No	Qty	Parts name
164-3018 Y	[2]	BRAKE & PLANETARY GP
144-4465 Y	[1]	DIFFERENTIAL GP-LIMITED SLIP
Y	[1]	GEAR GP-BEVEL & PINION (FIXED AXLE)
214-6156 Y	[1]	HOUSING GP-FIXED AXLE
Y		SEPARATE ILLUSTRATION

#SEBP38660511

334-0426: AXLE AR-FIXED & OSCILLATING

AXLE AR-FIXED & OSCILLATING

334-0426 AXLE AR-FIXED & OSCILLATING
S/N K5K2876-UP
CANNOT BE USED WITH @@@@@243-1946@@@@@, @@@@@319-8253@@@@@, @@@@@244-3375@@@@@, @@@@@325-2745@@@@@, @@@@@334-0443@@@@@, @@@@@335-5327@@@@@, @@@@@325-2739@@@@@, @@@@@325-2748@@@@@

i03852931 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
214-9402 Y	[1]	AXLE AR-FIXED (FRONT, LIMITED SLIP DIFF)
126-7845 Y	[1]	AXLE AR-OSCILLATING (REAR, LIMITED SLIP DIFF)
325-2738 Y	[1]	CONTROL AR-QUICK COUPLER
244-3442 Y	[1]	CONTROL AR-RIDE (2-VALVE)
Y		SEPARATE ILLUSTRATION

#SEBP38660512

112-0723: AXLE AR-OSCILLATING

AXLE AR-OSCILLATING

112-0723 AXLE AR-OSCILLATING -REAR, STANDARD DIFFERENTIAL
S/N K5K1-2875
PART OF 334-0420, 334-0424, 334-0428, 334-0431, 340-5654, 352-7961, 352-7962 CONFIGURATION AR, 237-0240 POWER TRAIN AR

i00969649 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
112-0757 Y	[2]	BRAKE & PLANETARY GP
137-1392 Y	[1]	DIFFERENTIAL GP
112-0778 Y	[1]	GEAR GP-BEVEL & PINION (OSCILLATING AXLE)
112-0724 Y	[1]	HOUSING GP-OSCILLATING AXLE
Y		SEPARATE ILLUSTRATION

#SEBP38660513

126-7845: AXLE AR-OSCILLATING

AXLE AR-OSCILLATING

126-7845 AXLE AR-OSCILLATING -REAR, LIMITED SLIP DIFFERENTIAL
S/N K5K1-UP
PART OF 334-0426 AXLE AR-FIXED & OSCILLATING, 334-0432, 334-0433, 360-5886 CONFIGURATION AR

i05099230 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
112-0757 Y	[2]	BRAKE & PLANETARY GP
144-4465 Y	[1]	DIFFERENTIAL GP-LIMITED SLIP
		-OR-
372-4788 Y	[1]	DIFFERENTIAL GP-LIMITED SLIP
112-0778 Y	[1]	GEAR GP-BEVEL & PINION
112-0724 Y	[1]	HOUSING GP-OSCILLATING AXLE
Y		SEPARATE ILLUSTRATION

#SEBP38660514

126-7846: AXLE AR-OSCILLATING

AXLE AR-OSCILLATING

126-7846 AXLE AR-OSCILLATING -REAR, NOSPIN DIFFERENTIAL
S/N K5K1-2875

i01914239 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
112-0757 Y	[2]	BRAKE & PLANETARY GP
128-0745 Y	[1]	DIFFERENTIAL GP-NOSPIN
112-0778 Y	[1]	GEAR GP-BEVEL & PINION (OSCILLATING AXLE)
112-0724 Y	[1]	HOUSING GP-OSCILLATING AXLE
Y		SEPARATE ILLUSTRATION

#SEBP38660515

112-0757: BRAKE & PLANETARY GP

BRAKE & PLANETARY GP

112-0757 BRAKE & PLANETARY GP
S/N K5K1-UP
PART OF 214-9398, 214-9402 AXLE AR-FIXED, 112-0723, 126-7845, 126-7846 AXLE AR-OSCILLATING

i00486660 SEBP3866

1120757 BRAKE & PLANETARY GP Parts scheme

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8R-4568	[1]	PISTON
2.	8R-9207	[1]	SEAL
3.	293-3609	[3]	SPRING
4.	334-1034	[1]	DISC-FRICTION
5.	9C-8418	[1]	PLATE-REACTION
6.	1F-5151	[3]	DOWEL
7.	164-3071	[3]	GEAR-PLANETARY (30-TEETH)
8.	9C-7727	[3]	BUSHING
9.	9C-9537	[6]	WASHER-THRUST
10.	8T-2925	[3]	PIN-SPRING
11.	8R-1888	[3]	SHAFT-PLANETARY
12.	8R-4571	[1]	CARRIER-PLANETARY
13.	9M-4335	[2]	DOWEL-REACTION
14.	164-6476	[1]	GEAR-SUN (18-TEETH)
15.	149-9112	[1]	DOWEL-HOLLOW
16.	117-1801	[1]	DOWEL
17.	372-0730	[1]	GEAR-RING (81-TEETH)
18.	2N-2658	[1]	BOLT-SOCKET HEAD (8-32X15.88-MM)
19.	096-6166	[1]	WASHER-HARD (4.5X9X1-MM THK)
20.	112-0759	[1]	PLUG
21.	138-1645	[3]	PIN-SPRING
22.	149-9114	[1]	PIN (BRAKE DISC WEAR INDICATOR)
23.	150-4651	[1]	SEAL-O-RING
24.	325-3780	[1]	SEAL
25.	117-1803	[1]	CUP
26.	325-3781	[1]	RING-BACKUP

#SEBP38660516

164-3018: BRAKE & PLANETARY GP

BRAKE & PLANETARY GP

164-3018 BRAKE & PLANETARY GP
S/N K5K1-UP
PART OF 214-6161, 214-9397, 291-0040 AXLE AR-FIXED

i00982373 SEBP3866

1643018 BRAKE & PLANETARY GP Parts scheme

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8R-4568	[1]	PISTON
2.	8R-9207	[1]	SEAL
3.	325-3780	[1]	SEAL
4.	334-1034	[1]	DISC-FRICTION
5.	9C-8418	[1]	PLATE-REACTION
6.	1F-5151	[3]	DOWEL
7.	164-3071	[3]	GEAR-PLANETARY (30-TEETH)(30 TEETH)
8.	9C-7727	[3]	BUSHING
9.	9C-9537	[6]	WASHER-THRUST
10.	8T-2925	[3]	PIN-SPRING
11.	8R-1888	[3]	SHAFT-PLANETARY
12.	8R-4571	[1]	CARRIER-PLANETARY
13.	9M-4335	[2]	DOWEL-REACTION
14.	164-6476	[1]	GEAR-SUN (18-TEETH)
15.	149-9112	[1]	DOWEL-HOLLOW
16.	117-1801	[1]	DOWEL
17.	372-0730	[1]	GEAR-RING (81-TEETH)
18.	2N-2658	[1]	BOLT-SOCKET HEAD (8-32X15.88-MM)
19.	096-6166	[1]	WASHER-HARD (4.5X9X1-MM THK)
20.	112-0759	[1]	PLUG
21.	138-1645	[3]	PIN-SPRING
22.	149-9114	[1]	PIN (BRAKE DISC WEAR INDICATOR)
23.	150-4651	[1]	SEAL-O-RING
24.	293-3609	[3]	SPRING
25.	117-1803	[1]	CUP
26.	325-3781	[1]	RING-BACKUP

#SEBP38660517

247-7830: CONTROL GP-TRANSMISSION HYD

CONTROL GP-TRANSMISSION HYD

247-7830 CONTROL GP-TRANSMISSION HYD
S/N DGB1-310; DGC1-1031
PART OF 237-8186, 237-8187 TRANSMISSION AR

i02246603 SEBP3866

2477830 CONTROL GP-TRANSMISSION HYD Parts scheme

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	202-8933 Y	[1]	VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL)
2.	4F-4097	[1]	SEAL-O-RING
3.	244-3114 Y	[6]	VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH)
4.	8S-0768	[6]	SEAL-O-RING
5.	8T-0100 M	[16]	BOLT (M8X1.25X60-MM)
6.	9M-1974	[13]	WASHER-HARD (8.8X16X2-MM THK)
7.	148-1928	[1]	VALVE-RELIEF (TORQUE CONVERTER INLET)
8.	247-4865	[1]	HARNESS AS-TRANSMISSION
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	155-2270	[10]	KIT-CONNECTING PLUG (2-PIN)
	155-2270	[10]	KIT-CONNECTING PLUG (2-PIN)
			(EACH KIT INCLUDES PLUG AS & WEDGE)
9.	9X-4609	[1]	SEAL-O-RING
10.	5P-9085	[1]	CLIP (LOOP)
11.	130-5300	[3]	CLIP
12.	145-7028 Y	[1]	SENSOR GP-TEMPERATURE (TRANSMISSION OIL)
13.	3J-1907	[7]	SEAL-O-RING
14.	3S-2093	[10]	STRAP-CABLE
15.	174-9603	[3]	PLATE
16.	6V-0852	[6]	CAP-DUST
17.	6D-4246	[1]	CLIP (LOOP)
18.	4P-7428	[1]	CLIP (LADDER)
19.	164-3651	[1]	ADAPTER
20.	7J-0204	[1]	SEAL-O-RING
21.	6V-0484	[6]	ELBOW
22.	4D-7794	[1]	CLIP
23.	124-9402	[1]	CLIP AS
24.	6V-4248 M	[1]	BOLT (M10X1.5X25-MM)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP38660518

247-7830: CONTROL GP-TRANSMISSION HYD

CONTROL GP-TRANSMISSION HYD

247-7830 CONTROL GP-TRANSMISSION HYD
S/N DGB311-839; DGC1032-2513
PART OF 237-8186, 237-8187 TRANSMISSION AR

i03099561 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	202-8933 Y	[1]	VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL)
2.	4F-4097	[1]	SEAL-O-RING
3.	244-3114 Y	[6]	VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH)
4.	6D-7889	[6]	SEAL-O-RING
5.	8T-0100 M	[16]	BOLT (M8X1.25X60-MM)
6.	9M-1974	[13]	WASHER-HARD (8.8X16X2-MM THK)
7.	148-1928	[1]	VALVE-RELIEF (TORQUE CONVERTER INLET)
8.	247-4865	[1]	HARNESS AS-TRANSMISSION
9.	9X-4609	[1]	SEAL-O-RING
10.	5P-9085	[1]	CLIP (LOOP)
11.	130-5300	[3]	CLIP
12.	145-7028 Y	[1]	SENSOR GP-TEMPERATURE (TRANSMISSION OIL)
14.	3S-2093	[10]	STRAP-CABLE
15.	174-9603	[3]	PLATE
16.	6V-0852	[6]	CAP-DUST
17.	6D-4246	[1]	CLIP (LOOP)
18.	4P-7428	[1]	CLIP (LADDER)
20.	7J-0204	[1]	SEAL-O-RING
21.	150-3065 C	[6]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-0484	[1]	ELBOW
22.	4D-7794	[1]	CLIP
23.	124-9402	[1]	CLIP AS
24.	6V-6317 CM	[1]	BOLT (M10X1.5X20-MM)
25.	6V-5839 C	[1]	WASHER (11X21X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP38660519

247-7830: CONTROL GP-TRANSMISSION HYD

CONTROL GP-TRANSMISSION HYD

247-7830 CONTROL GP-TRANSMISSION HYD
S/N DGB840-UP; DGC2514-UP
PART OF 237-8186, 237-8187 TRANSMISSION AR

i03617161 SEBP3866

For full view, you need register

Parts for your 950H WHEEL LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	202-8933 Y	[1]	VALVE GP-RELIEF (TRANSMISSION HYDRAULIC CONTROL)
2.	4F-4097	[1]	SEAL-O-RING
3.	244-3114 Y	[6]	VALVE GP-MODULATING (24-VOLT)(TRANSMISSION CLUTCH)
4.	6D-7889	[6]	SEAL-O-RING
5.	8T-0100 M	[16]	BOLT (M8X1.25X60-MM)
6.	9M-1974	[13]	WASHER-HARD (8.8X16X2-MM THK)
7.	148-1928	[1]	VALVE-RELIEF (TORQUE CONVERTER INLET)
8.	324-0685 C	[1]	HARNESS AS-TRANSMISSION
	155-2270	[10]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
	7X-6222	[1]	PLUG AS-CONNECTOR (24-PIN)
	3E-4367	[1]	RING-RETAINING
	3E-8558 M	[1]	BOLT (M5X0.8X39.37-MM)
	9X-3265	[2]	SEAL-CONNECTOR (24-PIN)
	8T-8737	[7]	PLUG-SEAL
	114-8843 E		SLEEVE-PLASTIC (200-CM)
			-OR-
	114-8845 E		SLEEVE-PLASTIC (20-CM)
	9X-3402	[37]	SOCKET-CONNECTOR (16-GA TO 18-GA)
	126-1768	[37]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	125-7874 E		TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM)
9.	9X-4609	[1]	SEAL-O-RING
10.	5P-9085	[1]	CLIP (LOOP)
11.	130-5300	[3]	CLIP
12.	145-7028 Y	[1]	SENSOR GP-TEMPERATURE (TRANSMISSION OIL)
14.	3S-2093	[10]	STRAP-CABLE
15.	174-9603	[3]	PLATE
17.	6D-4246	[1]	CLIP (LOOP)
18.	4P-7428	[1]	CLIP (LADDER)
20.	7J-0204	[1]	SEAL-O-RING
21.	150-3065	[6]	ELBOW AS
			(EACH INCLUDES)
	3J-1907	[1]	SEAL-O-RING
	6V-0484	[1]	ELBOW
22.	4D-7794	[1]	CLIP
23.	124-9402	[1]	CLIP AS
24.	6V-6317 M	[1]	BOLT (M10X1.5X20-MM)
25.	6V-5839	[1]	WASHER (11X21X2.5-MM THK)
	C		CHANGE FROM PREVIOUS TYPE
	E		ORDER BY THE CENTIMETER
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION