OPERATOR STATION
CONTROL GP-STEERINGCONTROL GP-TRANSMISSION
ELECTRICAL AND STARTING SYSTEM
CONTROL GP-UNPROGRAMMEDOPERATOR STATION
MONITOR GPOPERATOR STATION
CONTROL GP-STEERING
#SEBP38661160
219-7619: CONTROL GP-STEERING
219-7619 CONTROL GP-STEERING -COMMAND CONTROL STEERING
S/N K5K1-UP
PART OF 243-1081 CAB AR-ENCLOSED ROPS, 258-1554 CANOPY AR-OPEN ROPS
Type 3
S/N K5K1-UP
PART OF 243-1081 CAB AR-ENCLOSED ROPS, 258-1554 CANOPY AR-OPEN ROPS
Type 3
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 397-8809 CY | [1] | WIRING GP-STEERING | |
| 2. | 105-3477 M | [1] | BOLT-SOCKET HEAD (M10X1.5X45-MM) | |
| 3. | 112-2014 | [1] | CLAMP | |
| 4. | 112-9716 | [1] | LEVER | |
| 5. | 153-3945 | [1] | COVER AS (RH) | |
| 6. | 114-5312 | [1] | COVER AS (LH) | |
| 8. | 123-6713 | [1] | WEDGE | |
| 9. | 124-0065 | [1] | BLOCK | |
| 10. | 155-6526 | [1] | SLEEVE | |
| 11. | 297-4928 Y | [1] | STEERING COLUMN GP | |
| 12. | 1B-8705 | [1] | KEY-WOODRUFF | |
| 15. | 6V-5683 M | [4] | BOLT (M6X1X16-MM) | |
| 16. | 7X-2619 CM | [1] | BOLT (M6X1X10-MM) | |
| 17. | 8T-1159 M | [4] | BOLT-SOCKET HEAD (M10X1.5X25-MM) | |
| 18. | 8T-4121 C | [9] | WASHER-HARD (11X21X2.5-MM THK) | |
| 19. | 8T-4185 M | [2] | BOLT (M10X1.5X50-MM) | |
| 21. | 8T-4195 M | [5] | BOLT (M10X1.5X30-MM) | |
| 22. | 8T-4205 C | [1] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 26. | 255-8545 | [2] | WASHER-RUBBER (21.5X55X2-MM THK) | |
| 27. | 297-4929 | [1] | ADAPTER AS | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38661161
121-9300: CONTROL GP-TRANSMISSION
121-9300 CONTROL GP-TRANSMISSION -HMU
S/N K5K1-UP
PART OF 243-1080 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
Type 1
S/N K5K1-UP
PART OF 243-1080 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
Type 1
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 201-0212 CY | [1] | CONTROL GP-TRANSMISSION (HMU STEERING) | |
| 3. | 3S-2093 | [1] | STRAP-CABLE | |
| 4. | 4P-7581 | [1] | CLIP (LADDER) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38661162
121-9300: CONTROL GP-TRANSMISSION
121-9300 CONTROL GP-TRANSMISSION -HMU
S/N K5K1-UP
PART OF 243-1080 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
Type 2
S/N K5K1-UP
PART OF 243-1080 CAB AR-ENCLOSED ROPS, 258-1552 CANOPY AR-OPEN ROPS
Type 2
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 299-5840 CY | [1] | CONTROL GP-TRANSMISSION (HMU STEERING) | |
| 3. | 3S-2093 | [1] | STRAP-CABLE | |
| 4. | 4P-7581 | [1] | CLIP (LADDER) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38661163
121-9300: CONTROL GP-TRANSMISSION
121-9300 CONTROL GP-TRANSMISSION -HMU
S/N K5K1-UP
PART OF 243-1080 CAB AR-ENCLOSED ROPS
S/N K5K1-UP
PART OF 243-1080 CAB AR-ENCLOSED ROPS
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 134-1374 M | [4] | BOLT-SOCKET HEAD (M5X0.8X20-MM) | |
| 2. | 462-1016 CY | [1] | CONTROL GP-TRANSMISSION | |
| 3. | 3S-2093 | [1] | STRAP-CABLE | |
| 4. | 4P-7581 | [1] | CLIP (LADDER) | |
| 5. | 7K-1181 | [1] | STRAP-CABLE | |
| 6. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 7. | 8T-4137 M | [1] | BOLT (M10X1.5X20-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38661164
201-0212: CONTROL GP-TRANSMISSION
201-0212 CONTROL GP-TRANSMISSION -HMU
S/N K5K1-UP
HMU STEERING
PART OF 121-9300 CONTROL GP-TRANSMISSION
S/N K5K1-UP
HMU STEERING
PART OF 121-9300 CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 3E-5180 | [1] | WEDGE-RECEPTACLE LOCK (12-PIN) | |
| 3. | 186-3736 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 186-3735 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 5. | 101-9161 | [1] | WIRE AS | |
| 6. | 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | |
| (INCLUDES PLUG AS & WEDGE) | ||||
| 7. | 155-2262 | [1] | WEDGE-PLUG LOCK (4-PIN) | |
| 8. | 9G-3695 | [3] | PLUG-SEAL | |
#SEBP38661165
299-5840: CONTROL GP-TRANSMISSION
299-5840 CONTROL GP-TRANSMISSION -HMU
S/N K5K1-UP
PART OF 121-9300 CONTROL GP-TRANSMISSION
S/N K5K1-UP
PART OF 121-9300 CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9G-3695 | [2] | PLUG-SEAL | |
| 2. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 5. | 101-9161 | [1] | WIRE AS | |
| 6. | 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | |
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
#SEBP38661166
462-1016: CONTROL GP-TRANSMISSION
462-1016 CONTROL GP-TRANSMISSION
S/N K5K1-UP
PART OF 121-9300 CONTROL GP-TRANSMISSION
S/N K5K1-UP
PART OF 121-9300 CONTROL GP-TRANSMISSION
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8801 | [1] | KIT-RECEPTACLE (12-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 8T-8730 | [4] | SOCKET-CONNECTOR (16-GA TO 18-GA) | |
| 3. | 8T-8729 | [9] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 4. | 101-9161 | [1] | WIRE AS | |
| 5. | 155-2271 | [1] | KIT-CONNECTING PLUG (4-PIN) | |
| (INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 6. | 9G-3695 | [2] | PLUG-SEAL | |
#SEBP38661167
154-7443: CONTROL GP-UNPRGMED MONITOR
154-7443 CONTROL GP-UNPRGMED MONITOR -CATERPILLAR MONITORING SYSTEM
S/N K5K1-UP
PART OF 237-4910 WIRING GP-CAB, 262-9187 WIRING GP-OPEN ROPS
S/N K5K1-UP
PART OF 237-4910 WIRING GP-CAB, 262-9187 WIRING GP-OPEN ROPS
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 252-4501 | [1] | CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP38661168
308-3869: CONTROL GP-UNPRGMED MONITOR
308-3869 CONTROL GP-UNPRGMED MONITOR -MESSENGER
S/N K5K1-UP
INDUSTRIAL
PART OF 301-4565 MONITOR & MOUNTING GP
S/N K5K1-UP
INDUSTRIAL
PART OF 301-4565 MONITOR & MOUNTING GP
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | CONTROL AS-ELECTRONIC (MESSENGER) | ||
| 1A. | 124-0312 | [1] | SCREW-PAN HEAD (8-16X0.32-IN) | |
| 2. | [1] | BEZEL | ||
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP38661169
281-8871: DISPLAY GP-CAMERA
281-8871 DISPLAY GP-CAMERA -WORK AREA VISUAL SYSTEM
S/N K5K1-UP
CUSTOM
PART OF 288-0496 CAMERA AR
Type 1
S/N K5K1-UP
CUSTOM
PART OF 288-0496 CAMERA AR
Type 1
For full view, you need register
Parts for your 950H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [10] | STRAP-CABLE | |
| 2. | 251-8248 | [1] | CABLE AS-COMMUNICATION | |
| 3. | 255-4368 C | [1] | BRACKET | |
| 4. | 263-2166 | [1] | HARNESS AS-MONITOR | |
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3S-2093 | [1] | STRAP-CABLE | ||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(15-CM) | |||
| 9X-3402 | [9] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [9] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 9X-3401 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 155-2274 | [2] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 5. | 278-0123 C | [1] | BRACKET AS | |
| 6. | 333-8153 | [1] | CONNECTION AS | |
| 7. | 344-2732 CY | [1] | DISPLAY GP-CAMERA (WORK AREA VISUAL SYSTEM) | |
| 8. | 130-5300 | [1] | CLIP | |
| 9. | 5C-9553 M | [4] | BOLT (M6X1X16-MM) | |
| 10. | 8T-4205 | [4] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 11. | 9X-2040 CM | [2] | SCREW-TRUSS HEAD (M10X1.5X25-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
