AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

216-8354 WIRING GP-ENGINE -ALTERNATOR S/N GZN1-UP AN ATTACHMENT G3520C GENERATOR SET


ELECTRICAL AND STARTING SYSTEM
WIRING GP

GENERATOR SET G3520C GENERATOR SET GZN
 G3520C Generator Set GZN00001-UP SEBP3868 G3520C GZN   (2005)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
145-5138 WIRING GP-ELECTRONIC CONTROL
166-8368 WIRING GP-ENGINE
WIRING GP-ENGINE
216-8354 WIRING GP-ENGINE
WIRING GP-ENGINE
222-7908 WIRING GP-ENGINE
WIRING GP-ENGINE
222-7908 WIRING GP-ENGINE
WIRING GP-ENGINE
223-8471 WIRING GP-ENGINE
 

#SEBP38680700
 

216-8354: WIRING GP-ENGINE

216-8354 WIRING GP-ENGINE -ALTERNATOR
S/N GZN1-UP
AN ATTACHMENT
i01984683 SEBP3868
2168354 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3520C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-6772 [10] STRAP-CABLE  
2. 216-8355 [1] HARNESS AS-ENGINE (ALTERNATOR AIR)  
  7D-1314 [2] TERMINAL-SOLDER  
  6H-3586 [2] TERMINAL-RING (6-GA TO 8-GA, 1/4-IN SCREW)  
  8T-8827 [2] BOOT (RED)  
3. 4P-8134 [10] CLIP (LADDER)  
 

#SEBP38680701
 

222-7908: WIRING GP-ENGINE

222-7908 WIRING GP-ENGINE
S/N GZN1-867
PART OF 223-8471, 303-8488 WIRING GP-ENGINE
AN ATTACHMENT
i02290178 SEBP3868
2227908 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3520C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7581 [9] CLIP (LADDER)  
2. 9X-6772 [9] STRAP-CABLE  
3. 221-9565 [1] HARNESS AS-WIRING (IGNITION, RH)  
  4P-1539 [1] BUSHING-TERMINAL  
  4P-4892 [1] BUSHING-TERMINAL  
  4P-7581 [10] CLIP (LADDER)  
  8T-6342 BE TUBE-HEAT SHRINK (3.2-MM DIA)  
  9X-0482 [10] PLUG AS-CONNECTOR (3-PIN)  
  9X-6772 [10] STRAP-CABLE  
  104-3651 [1] LOCKNUT (1-11-1/2 NPT THD)  
  126-9424 BE TUBE-HEAT SHRINK (3.2-MM DIA)  
  134-6258 E CABLE-ELECTRICAL (16-GA)(3068-CM)  
4. 228-7469 [1] HARNESS AS-ENGINE  
  3E-3364 [1] RECEPTACLE (2-PIN)  
  4P-1539 [1] BUSHING-TERMINAL  
  4P-4892 [1] BUSHING-TERMINAL  
  5S-7433 [1] PLUG AS-CONNECTOR (2-PIN)  
  6D-8151 [1] CONNECTOR AS  
  7X-6222 [1] PLUG AS-CONNECTOR (24-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3265 [2] SEAL-CONNECTOR (24-PIN)  
  8T-6342 BE TUBE-HEAT SHRINK (3.2-MM DIA)  
  9X-4391 [1] PLUG AS-CONNECTOR (70-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8558 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-5615 [2] SEAL (INTERFACE, 70-PIN)  
  9X-8243 BE TUBE-HEAT SHRINK (39.9-MM DIA)  
  104-3651 [1] LOCKNUT (1-11-1/2 NPT THD)  
  153-2707 E CABLE-ELECTRICAL (2-CONDUCTOR, 18-GA)(645-CM)  
  176-2943 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG ASSEMBLY & WEDGE)
  134-6258 E CABLE-ELECTRICAL (16-GA)(496-CM)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
 

#SEBP38680702
 

222-7908: WIRING GP-ENGINE

222-7908 WIRING GP-ENGINE
S/N GZN868-UP
PART OF 303-8488 WIRING GP-ENGINE
AN ATTACHMENT
i05426666 SEBP3868
2227908 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3520C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4P-7581 [9] CLIP (LADDER)  
2. 9X-6772 [9] STRAP-CABLE  
3. 221-9565 [1] HARNESS AS-WIRING (IGNITION, RH)  
  4P-1539 [1] BUSHING-TERMINAL  
  4P-4892 [1] BUSHING-TERMINAL  
  4P-7581 [10] CLIP (LADDER)  
  8T-6342 BE TUBE-HEAT SHRINK (3.2-MM DIA)  
  9X-0482 [10] PLUG AS-CONNECTOR (3-PIN)  
  7K-1181 [10] STRAP-CABLE  
  104-3651 [1] LOCKNUT (1-11-1/2 NPT THD)  
  126-9424 BE TUBE-HEAT SHRINK (3.2-MM DIA)  
  2L-8051 [1] TERMINAL-RING (6-GA, 5/16-IN SCREW)  
    -OR-
  5P-3455 [1] TERMINAL-RING (8-GA, 5/16-IN SCREW)  
  134-6258 E CABLE-ELECTRICAL (16-GA)(3068-CM)  
4. 391-8337 CY [1] HARNESS AS-ENGINE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP38680703
 

223-8471: WIRING GP-ENGINE

223-8471 WIRING GP-ENGINE
S/N GZN1-591
AN ATTACHMENT
i01855642 SEBP3868
2238471 WIRING GP-ENGINE Parts scheme 2238471 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3520C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-4387 [4] SPACER (10.312X25.4X23.11-MM THK)  
2. 3E-6443 [1] CAP-CONNECTOR  
3. 9X-6772 B [41] STRAP-CABLE  
4. 206-4807 [1] HARNESS AS-SENSOR (DETONATION)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  186-3735 [30] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-6009 S TUBE-HEAT SHRINK (9.52-MM DIA)(5-DM)  
  8T-6342 E TUBE-HEAT SHRINK (3.2-MM DIA)(140-CM)  
  8T-9834 [1] PLUG AS-CONNECTOR (40-PIN)  
5. 207-2455 Y [1] BOX GP-JUNCTION  
6. 222-7908 Y [1] WIRING GP-ENGINE  
7. 147-0323 [4] STUD (3/8-16X3.25-IN)  
8. 2H-3755 [10] BOLT (5/16-18X0.43-IN)  
9. 3K-8106 [4] SCREW-MACHINE (8-32X1-IN)  
10. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
11. 4F-4879 [6] BOLT (3/8-16X0.5-IN)  
12. 4P-7428 [1] CLIP (LADDER)  
13. 4P-7581 [6] CLIP (LADDER)  
14. 4P-8134 [34] CLIP (LADDER)  
15. 5M-2894 [14] WASHER-HARD (10.2X18.5X2.5-MM THK)  
16. 6D-5801 [4] LOCKNUT (8-32-THD)  
17. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
18. 9S-8752 [9] NUT-FULL (3/8-16-THD)  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
  S   ORDER BY THE DECIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP38680704
 

223-8471: WIRING GP-ENGINE

223-8471 WIRING GP-ENGINE
S/N GZN592-UP
AN ATTACHMENT
i02843161 SEBP3868
2238471 WIRING GP-ENGINE Parts scheme 2238471 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3520C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6443 [1] CAP-CONNECTOR  
2. 9X-6772 B [41] STRAP-CABLE  
3. 121-0816 C [2] MOUNT-FLEXIBLE  
4. 146-1815 C [1] STRAP AS  
5. 206-4807 [1] HARNESS AS-SENSOR (DETONATION)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  186-3735 [30] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-6009 S TUBE-HEAT SHRINK (9.52-MM DIA)(5-DM)  
  8T-6342 E TUBE-HEAT SHRINK (3.2-MM DIA)(140-CM)  
  8T-9834 [1] PLUG AS-CONNECTOR (40-PIN)  
6. 303-8488 CY [1] WIRING GP-ENGINE  
7. 309-1767 C [1] BRACKET AS  
  180-2658 [4] SPACER (12X22X85.8-MM THK)  
8. 1A-5964 C [4] BOLT (3/8-16X4.5-IN)  
9. 1B-2713 C [4] BOLT (1/4-20X1.75-IN)  
10. 1H-3338 C [2] LOCKWASHER  
11. 2A-0762 C [2] BOLT (1/4-20X0.625-IN)  
12. 2H-3755 [10] BOLT (5/16-18X0.43-IN)  
13. 3B-4506 C [4] LOCKWASHER  
14. 4F-4879 [6] BOLT (3/8-16X0.5-IN)  
15. 4P-7428 [1] CLIP (LADDER)  
16. 4P-7581 [6] CLIP (LADDER)  
17. 4P-8134 [34] CLIP (LADDER)  
18. 5M-2894 C [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 5P-0537 C [4] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 6D-5801 [4] LOCKNUT (8-32-THD)  
21. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
22. 9S-8752 C [5] NUT-FULL (3/8-16-THD)  
23. 9X-8486 C [4] SCREW-MACHINE (8-32X0.75-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  S   ORDER BY THE DECIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP38680705
 

223-8471: WIRING GP-ENGINE

223-8471 WIRING GP-ENGINE
S/N GZN592-773
AN ATTACHMENT
i02887593 SEBP3868
2238471 WIRING GP-ENGINE Parts scheme 2238471 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3520C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6443 [1] CAP-CONNECTOR  
2. 9X-6772 BC [43] STRAP-CABLE  
3. 121-0816 [2] MOUNT-FLEXIBLE  
4. 146-1815 [1] STRAP AS  
5. 206-4807 [1] HARNESS AS-SENSOR (DETONATION)  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  186-3735 [30] PIN-CONNECTOR (16-GA TO 18-GA)  
  5P-6009 S TUBE-HEAT SHRINK (9.52-MM DIA)(5-DM)  
  8T-6342 E TUBE-HEAT SHRINK (3.2-MM DIA)(140-CM)  
  8T-9834 [1] PLUG AS-CONNECTOR (40-PIN)  
6. 303-8488 Y [1] WIRING GP-ENGINE  
7. 309-1767 [1] BRACKET AS  
  180-2658 [4] SPACER (12X22X85.8-MM THK)  
8. 1A-5183 C [4] BOLT (3/8-16X4.75-IN)  
9. 1B-2713 [4] BOLT (1/4-20X1.75-IN)  
10. 1H-3338 [2] LOCKWASHER  
11. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
12. 2H-3755 [10] BOLT (5/16-18X0.43-IN)  
13. 3B-4506 [4] LOCKWASHER  
14. 4F-4879 [6] BOLT (3/8-16X0.5-IN)  
15. 4P-7428 [1] CLIP (LADDER)  
16. 4P-7581 C [5] CLIP (LADDER)  
17. 4P-8134 C [35] CLIP (LADDER)  
18. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 5P-0537 C [6] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 6D-5801 [4] LOCKNUT (8-32-THD)  
21. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
22. 9S-8752 [5] NUT-FULL (3/8-16-THD)  
23. 9X-8486 [4] SCREW-MACHINE (8-32X0.75-IN)  
24. 0S-1615 C [2] BOLT (1/4-20X0.75-IN)  
25. 156-6175 C [2] CLIP (LADDER)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  S   ORDER BY THE DECIMETER
  Y   SEPARATE ILLUSTRATION
 

#SEBP38680706
 

223-8471: WIRING GP-ENGINE

223-8471 WIRING GP-ENGINE
S/N GZN774-UP
AN ATTACHMENT
i03864211 SEBP3868
2238471 WIRING GP-ENGINE Parts scheme 2238471 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3520C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6443 [1] CAP-CONNECTOR  
2. 7K-1181 BC [45] STRAP-CABLE  
3. 121-0816 [2] MOUNT-FLEXIBLE  
4. 146-1815 [1] STRAP AS  
5. 206-4807 [1] HARNESS AS-SENSOR (DETONATION)  
  8T-8729 [30] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-9834 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  3E-4367 [1] RING-RETAINING  
  9X-4712 [2] CAP  
  8T-8732 [1] RECEPTACLE-CONNECTOR (3-PIN)  
  5P-6009 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.2-M)  
  8T-6342 E TUBE-HEAT SHRINK (3.2-MM DIA)(140-CM)  
6. 303-8488 Y [1] WIRING GP-ENGINE  
7. 309-1767 [1] BRACKET AS  
  180-2658 [4] SPACER (12X22X85.8-MM THK)  
8. 1A-5183 [4] BOLT (3/8-16X4.75-IN)  
9. 1B-2713 [4] BOLT (1/4-20X1.75-IN)  
10. 1H-3338 [2] LOCKWASHER  
11. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
12. 2H-3755 [10] BOLT (5/16-18X0.43-IN)  
13. 3B-4506 [4] LOCKWASHER  
14. 4F-4879 [6] BOLT (3/8-16X0.5-IN)  
15. 4P-7428 [1] CLIP (LADDER)  
16. 4P-7581 C [6] CLIP (LADDER)  
17. 4P-8134 [35] CLIP (LADDER)  
18. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
19. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
20. 6D-5801 [4] LOCKNUT (8-32-THD)  
21. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
22. 9S-8752 [5] NUT-FULL (3/8-16-THD)  
23. 9X-8486 [4] SCREW-MACHINE (8-32X0.75-IN)  
24. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
25. 156-6175 [2] CLIP (LADDER)  
26. 219-4742 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP38680707
 

228-4142: WIRING GP-ENGINE

228-4142 WIRING GP-ENGINE
S/N GZN1-773
AN ATTACHMENT
i02861130 SEBP3868
2284142 WIRING GP-ENGINE Parts scheme 2284142 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3520C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6443 [1] CAP-CONNECTOR  
2. 9X-6772 B [43] STRAP-CABLE  
3. 121-0816 C [2] MOUNT-FLEXIBLE  
4. 146-1815 C [1] STRAP AS  
5. 206-4807 [1] HARNESS AS-SENSOR (DETONATION)  
6. 303-8283 CY [1] WIRING GP-BOX (POWER DISTRIBUTION)  
7. 309-1767 C [1] BRACKET AS  
  180-2658 [4] SPACER (12X22X85.8-MM THK)  
8. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
9. 132-5789 [1] CLIP (LADDER)  
10. 156-6175 [2] CLIP (LADDER)  
11. 1A-5183 [4] BOLT (3/8-16X4.75-IN)  
12. 1B-2713 C [4] BOLT (1/4-20X1.75-IN)  
13. 1H-3338 C [2] LOCKWASHER  
14. 2A-0762 C [2] BOLT (1/4-20X0.625-IN)  
15. 2H-3755 [10] BOLT (5/16-18X0.43-IN)  
16. 3B-4506 C [4] LOCKWASHER  
17. 4F-4879 [6] BOLT (3/8-16X0.5-IN)  
18. 4P-7428 [1] CLIP (LADDER)  
19. 4P-7581 [5] CLIP (LADDER)  
20. 4P-8134 [34] CLIP (LADDER)  
21. 5M-2894 C [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 5P-0537 C [6] WASHER-HARD (7.2X14.5X2-MM THK)  
23. 6D-5801 [4] LOCKNUT (8-32-THD)  
24. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
25. 9S-8752 C [5] NUT-FULL (3/8-16-THD)  
26. 9X-8486 C [4] SCREW-MACHINE (8-32X0.75-IN)  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  Y   SEPARATE ILLUSTRATION
 

#SEBP38680708
 

228-4142: WIRING GP-ENGINE

228-4142 WIRING GP-ENGINE
S/N GZN774-UP
AN ATTACHMENT
i03864191 SEBP3868
2284142 WIRING GP-ENGINE Parts scheme 2284142 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3520C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3E-6443 [1] CAP-CONNECTOR  
2. 9X-6772 BC [45] STRAP-CABLE  
3. 121-0816 [2] MOUNT-FLEXIBLE  
4. 146-1815 [1] STRAP AS  
5. 206-4807 [1] HARNESS AS-SENSOR (DETONATION)  
  8T-8729 [30] PIN-CONNECTOR (16-GA TO 18-GA)  
  8T-9834 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  3E-4367 [1] RING-RETAINING  
  9X-3132 [2] SEAL-CONNECTOR (40-PIN)  
  8T-8732 [10] RECEPTACLE-CONNECTOR (3-PIN)  
  8T-6342 E TUBE-HEAT SHRINK (3.2-MM DIA)(140-CM)  
6. 303-8283 Y [1] WIRING GP-BOX (POWER DISTRIBUTION)  
7. 309-1767 C [1] BRACKET AS  
  180-2658 [4] SPACER (12X22X85.8-MM THK)  
8. 0S-1615 [2] BOLT (1/4-20X0.75-IN)  
10. 156-6175 [2] CLIP (LADDER)  
11. 1A-5183 [4] BOLT (3/8-16X4.75-IN)  
12. 1B-2713 [4] BOLT (1/4-20X1.75-IN)  
13. 1H-3338 [2] LOCKWASHER  
14. 2A-0762 [2] BOLT (1/4-20X0.625-IN)  
15. 2H-3755 [10] BOLT (5/16-18X0.43-IN)  
16. 3B-4506 [4] LOCKWASHER  
17. 4F-4879 [6] BOLT (3/8-16X0.5-IN)  
18. 4P-7428 [1] CLIP (LADDER)  
19. 4P-7581 C [6] CLIP (LADDER)  
20. 4P-8134 C [35] CLIP (LADDER)  
21. 5M-2894 [10] WASHER-HARD (10.2X18.5X2.5-MM THK)  
22. 5P-0537 [6] WASHER-HARD (7.2X14.5X2-MM THK)  
23. 6D-5801 [4] LOCKNUT (8-32-THD)  
24. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
25. 9S-8752 [5] NUT-FULL (3/8-16-THD)  
26. 9X-8486 [4] SCREW-MACHINE (8-32X0.75-IN)  
27. 219-4742 [1] FILM-IDENTIFICATION (CIRCUIT BREAKER)  
28. 7K-1181 [5] STRAP-CABLE  
  B   USE AS REQUIRED
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP38680709
 

281-7709: WIRING GP-ENGINE

281-7709 WIRING GP-ENGINE
S/N GZN1-621
AN ATTACHMENT
i02596912 SEBP3868
2817709 WIRING GP-ENGINE Parts scheme 2817709 WIRING GP-ENGINE Parts scheme
  For full view, you need register

Parts for your G3520C GENERATOR SET:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2V-4387 [4] SPACER (10.312X25.4X23.11-MM THK)  
2. 3E-6443 [1] CAP-CONNECTOR  
3. 9X-6772 [39] STRAP-CABLE  
4. 207-2455 Y [1] BOX GP-JUNCTION  
5. 277-6853 [1] HARNESS AS-WIRING  
  5P-6009 D TUBE-HEAT SHRINK (9.52-MM DIA)(0.6-M)  
  8T-6342 E TUBE-HEAT SHRINK (3.2-MM DIA)(210-CM)  
  186-3733 [30] PIN-CONNECTOR (16-GA TO 18-GA)  
  186-3734 [40] SOCKET-CONNECTOR  
  8T-8732 [10] RECEPTACLE-CONNECTOR (3-PIN)  
  8T-9834 [1] PLUG AS-CONNECTOR (40-PIN)  
  3E-4367 [1] RING-RETAINING  
  3E-8557 M [1] BOLT (M5X0.8X39.37-MM)  
  9X-3132 [2] SEAL-CONNECTOR (40-PIN)  
  250-3485 [1] BOOT  
6. 281-7710 Y [1] WIRING GP-ENGINE  
7. 0S-1594 [5] BOLT (3/8-16X1-IN)  
8. 132-5789 [1] CLIP (LADDER)  
9. 147-0323 [4] STUD (3/8-16X3.25-IN)  
10. 2H-3755 [10] BOLT (5/16-18X0.43-IN)  
11. 3K-8106 [4] SCREW-MACHINE (8-32X1-IN)  
12. 4B-4863 [8] WASHER (4.7X11X1.2-MM THK)  
13. 4F-4879 [5] BOLT (3/8-16X0.5-IN)  
14. 4P-7581 [28] CLIP (LADDER)  
15. 4P-8134 [10] CLIP (LADDER)  
16. 5M-2894 [24] WASHER-HARD (10.2X18.5X2.5-MM THK)  
17. 6D-5801 [4] LOCKNUT (8-32-THD)  
18. 9M-1974 [10] WASHER-HARD (8.8X16X2-MM THK)  
19. 9S-8752 [14] NUT-FULL (3/8-16-THD)  
  D   ORDER BY THE METER
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Engine News
Correction to The Pocket Guide, SEBD0402 Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/07/01
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Grounding Design Guide for Electric Power Generation Products {4450, 4459}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Guidelines for Routing and Installing Wire Harness Assemblies {1408, 7553}
Repair Procedure for Damaged Harness Wiring {1408}
Repair Procedure for Damaged Harness Wiring {1408}
Procedure for Installing Continuous Telematics Power Retrofit (CTPR) for Electric Power{7606}
Procedure for Installing Continuous Telematics Power Retrofit (CTPR) for Electric Power{7606}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Procedure to Upgrade EMCP 1, EMCP 2, EMCP 2+, EMCP 3.1, EMCP 3.2, and EMCP 3.3 to EMCP 4.2B {1408, 4490, 7418, 7426, 7451}
Schematic
Schematics & Wiring Diagrams
ELECTRONIC MODULAR CONTROL PANEL II (EMCP II)
Schematics & Wiring Diagrams
CATERPILLAR SWITCHGEAR
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Wiring Harness
PL1000E Communication ECM
Wiring Harness
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
Testing and Adjusting
Electrical Connector - Inspect
PL1000E Communication ECM
Wiring Harness (Open Circuit) - Test
PL1000E Communication ECM
Wiring Harness (Short Circuit) - Test
PL1000E Communication ECM
Electrical Connector - Inspect
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
Wiring Harness (Open Circuit) - Test
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
Wiring Harness (Short Circuit) - Test
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
Troubleshooting
Connector Locations
GENSET, SR4, SR4 HV, SR4B and SR4B HV Electric Power Generation, 3126, 3176B, 3176C, 3196, 3408E, 3412C, 3412E, 3508, 3508B, 3512, 3512B, 3516, 3516B and G3616 Engines, 3406E GEN SET Generator Set, 3406E IND, 3408C IND and 3456 IND Industrial Engines and 3126B MARINE, 3176C MARINE, 3196 MARINE and 3406E MARINE Marine Engines PL1000T
Connector Locations
PL1000E Communication ECM
Service Magazine
Correction to The Pocket Guide, SEBD0402, Is Available as a Reference for Routing and Installing Wire Harness Assemblies {1408}
2000/06/26
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog G3520C :

166-8368 WIRING GP-ENGINE
145-5138 WIRING GP-ELECTRONIC CONTROL
WIRING GP-BOX
315-2326 WIRING GP-BOX
WIRING GP-BOX
303-8283 WIRING GP-BOX
207-3814 WIRE AS
VALVE GP-SOLENOID
9Y-6992 VALVE GP-SOLENOID
VALVE GP-SOLENOID
103-0692 VALVE GP-SOLENOID
TRANSFORMER GP-POTENTIAL
391-6026 TRANSFORMER GP-POTENTIAL
WIRING GP-ENGINE
222-7908 WIRING GP-ENGINE
WIRING GP-ENGINE
222-7908 WIRING GP-ENGINE
WIRING GP-ENGINE
223-8471 WIRING GP-ENGINE
WIRING GP-ENGINE
223-8471 WIRING GP-ENGINE
WIRING GP-ENGINE
223-8471 WIRING GP-ENGINE
WIRING GP-ENGINE
223-8471 WIRING GP-ENGINE
WIRING GP-ENGINE
228-4142 WIRING GP-ENGINE
WIRING GP-ENGINE
228-4142 WIRING GP-ENGINE

Truck sale:

Caterpillar G3520C, Construction
619,000 
Caterpillar G3520C, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar G3520C, , Bau-Und Bergbauausrüstung
333,538 USD 
Caterpillar G3520C, , Bau-Und Bergbauausrüstung
- Stationary Generator Sets
ZEPPELIN POWER SYSTEMS GMBH & CO. KG
Germany
Caterpillar G3520C UNUSED, Construction
555,147 
Caterpillar G3520C UNUSED, Construction
- Stationary Generator Sets
ZEPPELIN POWER SYSTEMS GMBH & CO. KG
Germany
Caterpillar G3520C, Construction
440,904 
Caterpillar G3520C, Construction
- Stationary Generator Sets
ZEPPELIN POWER SYSTEMS GMBH & CO. KG
Germany
Caterpillar G3520C UNUSED, Construction
555,221 
Caterpillar G3520C UNUSED, Construction
- Stationary Generator Sets
ZEPPELIN POWER SYSTEMS GMBH & CO. KG
Germany
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.