ELECTRICAL AND STARTING SYSTEM
WIRING GPELECTRICAL AND STARTING SYSTEM
WIRING GP
#SEBP38740450
237-4910: WIRING GP-CAB
237-4910 WIRING GP-CAB
S/N K6K517-UP
PART OF 243-1080, 243-1081 CAB AR-ENCLOSED ROPS
Type 2
S/N K6K517-UP
PART OF 243-1080, 243-1081 CAB AR-ENCLOSED ROPS
Type 2
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 3E-5239 | [1] | RELAY AS (24-VOLT)(FRONT CAB FLOODLIGHTS) | |
| 2A. | 3E-5239 | [1] | RELAY AS (24-VOLT)(REAR FLOODLIGHTS) | |
| 2B. | 3E-5239 | [1] | RELAY AS (24-VOLT)(HORN) | |
| 3. | 3E-6328 Y | [1] | ALARM GP (24-VOLT)(ACTION) | |
| 4. | 3E-6389 Y | [2] | LAMP GP-DOME (24-VOLT)(CAB) | |
| 5. | 4P-8525 | [11] | SPACER (9X16X30-MM THK) | |
| 6. | 4V-4164 | [16] | BUSHING-TERMINAL | |
| 7. | 6I-1418 | [8] | SPACER (8.2X12.7X28.7-MM THK) | |
| 8. | 6V-8369 | [2] | NUT (7/16-28-THD) | |
| 9. | 7K-1181 | [43] | STRAP-CABLE | |
| 10. | 100-3245 | [4] | LAMP (24-VOLT, 0.17-AMPERE) | |
| 11. | 8C-6354 | [1] | CAP-RECEPTACLE (ET CONNECTOR) | |
| 12. | 8T-9655 | [16] | MOUNT-ISOLATION | |
| 13. | 8X-5804 | [1] | STRAP AS-GROUND | |
| 14. | 9F-8125 | [16] | LOCKWASHER | |
| 15. | 9W-1441 | [7] | FUSE (15-AMPERE) | |
| 16. | 9W-1442 | [24] | FUSE (10-AMPERE) | |
| 17. | 9W-1446 | [1] | FUSE (20-AMPERE) | |
| 18. | 098-8968 | [16] | WASHER (5X16X1.2-MM THK) | |
| 19. | 103-5526 Y | [1] | CONTROL GP-MONITOR (BACKLIGHT DIMMER) | |
| 20. | 108-3320 | [1] | SWITCH AS-ROTARY (24-VOLT, 5-POSITION)(RUNNING LIGHTS) | |
| 9W-0852 | [8] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 21. | 110-6109 | [6] | KNOB-CONTROL (CONTROL PANEL SWITCHES) | |
| 22. | 110-7887 | [1] | SWITCH AS-START (KEY) | |
| 7T-6799 | [1] | NUT-MOUNTING (1-32-THD) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 23. | 112-6174 | [1] | SWITCH GP-ROTARY (WIPER, WASHER) | |
| 2H-3920 | [1] | LOCKWASHER | ||
| 6V-8369 | [1] | NUT (7/16-28-THD) | ||
| 8T-8729 | [6] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 24. | 117-2311 | [1] | SOCKET-AUXILIARY POWER (12-VOLT) | |
| 26. | 123-2896 | [1] | GASKET | |
| 27. | 140-5945 | [1] | FILM-IDENTIFICATION (HORN) | |
| 28. | 154-7443 Y | [1] | CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| 29. | 166-6928 Y | [1] | MODULE GP-QUAD GAUGE | |
| 30. | 170-1821 | [1] | SWITCH AS-PUSH BUTTON (HORN) | |
| 6F-0253 | [1] | LOCKWASHER | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 31. | 172-9200 | [1] | SUPPRESSOR-ARC | |
| 32. | 173-2234 | [1] | PLATE AS | |
| 33. | 185-6335 | [1] | SWITCH AS-ROTARY (24-VOLT)(GEAR SELECT) | |
| 33A. | 185-6335 | [1] | SWITCH AS-ROTARY (24-VOLT)(VARIABLE SHIFT CONTROL) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 8T-8737 | [2] | PLUG-SEAL | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 34. | 198-6570 | [1] | LIGHTER GP (12-VOLT)(CIGAR) | |
| 198-6571 | [1] | ELEMENT AS-HEATER (12-VOLT) | ||
| 35. | 204-2281 | [2] | STRAP-CABLE | |
| 36. | 204-8000 | [2] | MOUNTING-CABLE TIE | |
| 37. | 340-7161 C | [1] | CONVERTER-POWER (24-VOLT TO 12-VOLT) | |
| 38. | 234-5925 | [1] | GASKET | |
| 39. | 235-5506 | [1] | HARNESS AS-LIGHTING (CAB FLOODLIGHTS) | |
| 126-1768 | [8] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| -OR- | ||||
| 9X-3402 | [8] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| 2L-8066 | [4] | TERMINAL-RING (10-GA TO 12-GA, NO. 10 SCREW) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 40. | 236-4631 | [7] | BEZEL | |
| 41. | 236-9993 | [1] | PLATE AS | |
| 6V-9632 M | [4] | NUT-WELD (M6X1-THD) | ||
| 8T-3490 M | [2] | NUT-WELD (M10X1.5-THD) | ||
| 8T-3612 M | [4] | NUT-WELD (M8X1.25-THD) | ||
| 8T-8874 M | [9] | NUT-WELD (M5X0.8-THD) | ||
| 42. | 242-6099 | [1] | CLIP (LOOP) | |
| 43. | 246-5459 | [1] | PLATE | |
| 44. | 247-4184 | [1] | FILM-IDENTIFICATION (DOWNSHIFT SWITCH) | |
| 45. | 260-9602 Y | [1] | HARNESS AS-WIRING (SERVICE TOOL) | |
| 46. | 263-1493 | [1] | SWITCH GP-PUSH BUTTON (THROTTLE LOCK RESUME) | |
| 172-3511 | [1] | NUT (5/8-24-THD) | ||
| 6F-0253 | [1] | LOCKWASHER | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 9X-3402 | [3] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [3] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 47. | 275-7741 Y | [1] | SWITCH GP-WIPER (24-VOLT) | |
| 48. | 284-3623 | [1] | SWITCH AS-ROCKER (24-VOLT)(HYDRAULIC LOCKOUT) | |
| 49. | 284-3624 | [1] | SWITCH AS-ROCKER (24-VOLT)(FINE MODULATION) | |
| 50. | 310-7565 | [1] | HARNESS AS-OPERATOR CONTROLS | |
| 274-3775 | [1] | CAP-CONNECTOR | ||
| 274-3776 | [1] | CAP-SEAL | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [4] | KIT-CONNECTING PLUG (4-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 8T-8737 | [10] | PLUG-SEAL | ||
| 9X-3402 | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [32] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 119-3662 E | TUBE-HEAT SHRINK (10.85-MM DIA)(7-CM) | |||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(5-CM) | |||
| 125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM) | |||
| 51. | 358-2365 Y | [1] | HARNESS AS-CAB | |
| 52. | 132-5789 | [3] | CLIP (LADDER) | |
| 53. | 134-2540 | [1] | RECEPTACLE AS-CONNECTOR (3-PIN) | |
| 54. | 156-6175 | [3] | CLIP (LADDER) | |
| 55. | 198-4775 | [2] | WASHER-HARD (6.6X15X6-MM THK) | |
| 56. | 202-2762 | [1] | CLIP (LOOP) | |
| 57. | 228-6089 | [13] | PLUG (ROCKER SWITCH) | |
| 58. | 236-4608 | [1] | SWITCH AS-ROCKER (MODE SELECT) | |
| 59. | 236-4609 | [1] | SWITCH AS-ROCKER (TMSN NEUTRALIZER OVERRIDE) | |
| 60. | 236-4610 | [1] | SWITCH AS-ROCKER (AIR CONDITIONER, HEATER)(AIR CONDITIONER, HEATER) | |
| 61. | 236-4611 | [1] | SWITCH AS-ROCKER (FAN BLOWER SPEED) | |
| 62. | 236-4619 | [1] | SWITCH AS-ROCKER (LIFT, TILT KICKOUT) | |
| 63. | 242-8421 | [1] | PLATE AS | |
| 64. | 357-0733 | [2] | CONTROL GP-DISPLAY ELECTRONIC (INDICATOR PANEL) | |
| 65. | 291-2165 | [1] | POTENTIOMETER AS (TEMPERATURE CONTROL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [4] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 236-8722 | [1] | WASHER (10.5X22.2X1.6-MM THK) | ||
| 66. | 2A-2677 | [1] | SPACER (10.7X17.14X19.05-MM THK) | |
| 67. | 2H-3920 | [6] | LOCKWASHER | |
| 68. | 304-5687 | [1] | CONTROL GP-UNPROGRAMMED (POWER TRAIN) | |
| 69. | 304-5691 | [1] | CONTROL GP-UNPROGRAMMED (IMPLEMENT) | |
| 71. | 3S-2093 | [25] | STRAP-CABLE | |
| 72. | 4B-2049 | [16] | NUT (10-32-THD) | |
| 73. | 4D-7388 | [1] | CLIP (LOOP) | |
| 74. | 4P-7581 | [2] | CLIP (LADDER) | |
| 75. | 5C-7261 M | [2] | NUT (M8X1.25-THD) | |
| 76. | 5C-8312 M | [4] | NUT (M4X0.7-THD) | |
| 78. | 6D-1641 | [1] | CLIP (LOOP) | |
| 79. | 6D-6146 | [8] | SCREW-MACHINE (10-32X1.25-IN) | |
| 80. | 6V-1889 | [1] | CLIP (LOOP) | |
| 81. | 6V-2687 | [8] | SCREW-PAN HEAD (10-24X1-IN) | |
| 83. | 7U-4891 | [4] | SCREW (10-32X1-IN) | |
| 84. | 8T-6693 CM | [2] | SCREW-MACHINE (M5X0.8X16-MM) | |
| 85. | 7X-0818 M | [3] | BOLT (M8X1.25X45-MM) | |
| 86. | 8T-0337 M | [4] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 87. | 8T-4121 | [12] | WASHER-HARD (11X21X2.5-MM THK) | |
| 88. | 8T-4133 M | [1] | NUT (M10X1.5-THD) | |
| 89. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 90. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 91. | 8T-4138 M | [10] | BOLT (M6X1X20-MM) | |
| 92. | 8T-4171 M | [2] | BOLT (M6X1X12-MM) | |
| 93. | 8T-4186 M | [1] | BOLT (M10X1.5X40-MM) | |
| 94. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 95. | 8T-4205 | [9] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 96. | 8T-4223 | [5] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 97. | 8T-4224 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| 98. | 8T-4244 M | [5] | NUT (M12X1.75-THD) | |
| 99. | 8T-4970 M | [5] | BOLT (M6X1X14-MM) | |
| 100. | 8T-6870 M | [8] | BOLT (M8X1.25X70-MM) | |
| 101. | 9M-5870 | [8] | GROMMET | |
| 102. | 9N-0869 | [11] | WASHER-HARD (8.8X25.5X2-MM THK) | |
| 103. | 9X-1046 M | [6] | SCREW (M4X0.7X18-MM) | |
| 104. | 9X-2480 M | [2] | BOLT (M6X1X45-MM) | |
| 105. | 9X-6165 | [1] | WASHER (6.5X22X2.5-MM THK) | |
| 106. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38740451
306-5348: WIRING GP-CAB
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(VARIABLE PITCH FAN) | |
| 2. | 262-9949 Y | [1] | SWITCH GP-ROCKER (VARIABLE PITCH FAN) | |
| 3. | 306-5350 | [1] | HARNESS AS-CAB (VARIABLE PITCH FAN) | |
| 114-8843 E | SLEEVE-PLASTIC (40-CM) | |||
| 126-1767 | [1] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 9X-3401 | [1] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
| 9W-2032 | [1] | TERMINAL-BLADE (10-GA TO 12-GA) | ||
| 9X-1054 | [1] | PLUG AS-CONNECTOR (4-PIN) | ||
| 100-5041 | [4] | TERMINAL-RECEPTACLE (18-GA TO 20-GA) | ||
| 4. | 5C-9553 M | [1] | BOLT (M6X1X16-MM) | |
| 5. | 7K-1181 B | [8] | STRAP-CABLE | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38740452
241-0642: WIRING GP-CHASSIS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5169 | [1] | GUARD-SWITCH | |
| 2. | 7K-1181 | [42] | STRAP-CABLE | |
| 3. | 8T-2893 | [1] | LOCK GP-CYLINDER | |
| 226-0291 J | [1] | LOCK AS | ||
| 226-0321 | [1] | CAM | ||
| 4. | 118-6365 | [1] | PLATE AS | |
| 6V-6716 | [2] | RIVET-TRUSS HEAD | ||
| 109-1645 | [1] | CLIP | ||
| 5. | 125-1302 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(START RELAY) | |
| 6. | 130-9811 | [1] | SENSOR GP-TEMPERATURE (HYDRAULIC OIL) | |
| 7. | 146-0240 | [1] | SWITCH GP-TOGGLE (LOCKING)(HOOD TILT ACTUATOR) | |
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE | ||||
| 8. | 149-2612 | [1] | RELAY AS (24-VOLT)(HOOD TILT MOTOR) | |
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9W-0852 | [4] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9. | 158-6634 | [1] | SWITCH GP-TOGGLE (GROUND LEVEL SHUTDOWN) | |
| 3E-3377 | [1] | WEDGE-RECEPTACLE LOCK (4-PIN) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9G-3695 | [1] | PLUG-SEAL | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 164-7577 Y | [1] | SWITCH GP-BYPASS (POWER TRAIN OIL FILTER) | |
| 11. | 172-4871 | [1] | BRACKET AS | |
| 12. | 174-4312 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 5P-6008 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M) | |||
| 8T-5677 D | SLEEVE (0.6-M) | |||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 13. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 14. | 188-6252 | [1] | FILM-INSTRUCTION (HOOD TILT) | |
| 15. | 246-4488 | [1] | BAR-BUS | |
| 16. | 246-4489 | [1] | WIRE AS | |
| 17. | 247-4506 | [1] | HARNESS AS-CHASSIS (MAIN) | |
| 102-8802 | [6] | KIT-RECEPTACLE (2-PIN) | ||
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8801 | [3] | KIT-RECEPTACLE (12-PIN) | ||
| (EACH KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 110-6845 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 8N-1533 | [1] | PLUG AS-CONNECTOR (7-PIN) | ||
| 8N-1535 | [1] | BELL AS-END | ||
| 9X-6772 | [1] | STRAP-CABLE | ||
| 113-0580 | [1] | RECEPTACLE AS-CONNECTOR (40-PIN) | ||
| 127-5484 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 129-7163 | [1] | PLUG AS-CONNECTOR (1-PIN) | ||
| 129-7164 | [1] | RECEPTACLE AS-CONNECTOR (1-PIN) | ||
| 155-2255 | [2] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [3] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [10] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2271 | [2] | KIT-CONNECTING PLUG (4-PIN) | ||
| 155-2274 | [1] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 160-7689 | [1] | PLUG AS-CONNECTOR (70-PIN) | ||
| 18. | 247-7569 | [1] | HARNESS AS-CHASSIS (HYDRAULIC TANK) | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 19. | 248-1545 | [1] | FILM-IDENTIFICATION (FUSE PANEL) | |
| 20. | 271-3952 | [1] | BAR-BUS | |
| 21. | 275-4024 | [1] | PANEL AS | |
| 3R-9322 | [1] | HINGE | ||
| 6V-9632 M | [7] | NUT-WELD (M6X1-THD) | ||
| 7T-1099 | [5] | LINK | ||
| 8T-6462 M | [1] | BOSS-WELD (M10X1.5X25-MM) | ||
| 22. | 275-9916 | [1] | BAR-BUS | |
| 23. | 033-8248 | [4] | CLIP (LOOP) | |
| 24. | 130-5300 | [6] | CLIP | |
| 25. | 132-5789 | [2] | CLIP (LADDER) | |
| 26. | 139-1398 | [1] | CLIP (LOOP) | |
| 27. | 171-2206 | [1] | CIRCUIT BREAKER AS (50-AMPERE)(START) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 28. | 171-2210 | [1] | CIRCUIT BREAKER AS (80-AMPERE)(MAIN) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 29. | 171-2211 | [1] | CIRCUIT BREAKER AS (90-AMPERE)(STARTING AID) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 30. | 171-2212 | [1] | CIRCUIT BREAKER AS (105-AMPERE)(ALTERNATOR) | |
| 6V-8187 | [2] | NUT (1/4-28-THD) | ||
| 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | ||
| 253-2111 | [2] | LOCKWASHER | ||
| 31. | 189-3158 | [1] | SUPPRESSOR-ARC | |
| 32. | 241-8368 Y | [1] | SWITCH GP-MAGNETIC (24-VOLT)(MAIN RELAY) | |
| 33. | 2M-4004 | [1] | BUTTON-PLUG | |
| 34. | 3E-6769 | [1] | SEAL-O-RING | |
| 35. | 3E-6909 | [1] | CLIP (LOOP) | |
| 36. | 3J-1907 | [1] | SEAL-O-RING | |
| 37. | 3P-3839 | [1] | GROMMET | |
| 38. | 3T-2662 | [1] | CIRCUIT BREAKER AS (15-AMPERE, AUTOMATIC RESET)(RUNNING LIGHTS) | |
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 39. | 4D-7794 | [1] | CLIP | |
| 40. | 4K-8864 | [1] | CLIP (LOOP) | |
| 41. | 4P-8134 | [1] | CLIP (LADDER) | |
| 42. | 4S-1962 | [1] | CLIP (LOOP) | |
| 43. | 5L-4507 | [8] | SCREW-MACHINE (10-32X0.875-IN) | |
| 44. | 5M-6668 | [6] | SCREW-MACHINE (8-32X0.75-IN) | |
| 45. | 6D-4244 | [1] | CLIP (LOOP) | |
| 46. | 6T-3644 | [1] | CIRCUIT BREAKER AS (20-AMPERE)(HOOD TILT ACTUATOR) | |
| 46A. | 6T-3644 | [1] | CIRCUIT BREAKER AS (20-AMPERE)(UNSWITCHED BAT POWER TO CAB) | |
| (EACH INCLUDES) | ||||
| 6V-8376 | [2] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [2] | LOCKWASHER | ||
| 47. | 7C-4354 | [3] | CLIP | |
| 48. | 7D-7233 | [5] | CLIP (LOOP) | |
| 49. | 8S-7583 | [1] | GROMMET | |
| 50. | 8T-4121 | [25] | WASHER-HARD (11X21X2.5-MM THK) | |
| 51. | 8T-4133 M | [9] | NUT (M10X1.5-THD) | |
| 52. | 8T-4137 M | [11] | BOLT (M10X1.5X20-MM) | |
| 53. | 8T-4191 M | [1] | BOLT (M10X1.5X16-MM) | |
| 54. | 8T-4970 M | [7] | BOLT (M6X1X14-MM) | |
| 55. | 8T-5436 M | [4] | BOLT (M10X1.5X130-MM) | |
| 56. | 9X-8256 | [7] | WASHER (6.6X12X2-MM THK) | |
| D | ORDER BY THE METER | |||
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38740453
241-0642: WIRING GP-CHASSIS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 C | [32] | STRAP-CABLE | |
| 2. | 118-6365 C | [1] | PLATE AS | |
| 6V-6716 | [2] | RIVET-TRUSS HEAD | ||
| 109-1645 | [1] | CLIP | ||
| 3. | 130-9811 | [1] | SENSOR GP-TEMPERATURE (HYDRAULIC OIL) | |
| 4. | 174-4312 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 5P-6008 D | TUBE-HEAT SHRINK (6.35-MM DIA)(0.2-M) | |||
| 8T-5677 D | SLEEVE (0.6-M) | |||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 6. | 188-6252 | [1] | FILM-INSTRUCTION (HOOD TILT) | |
| 7. | 216-7166 | [1] | PLATE AS | |
| 6V-2716 | [2] | LATCH AS | ||
| 109-1645 | [1] | CLIP | ||
| 8. | 298-3649 | [1] | HARNESS AS-CHASSIS | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS & WEDGE) | ||||
| 9. | 259-1107 | [1] | SWITCH AS-TOGGLE (HOOD TILT ACTUATOR) | |
| (EACH INCLUDES) | ||||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 10. | 289-3038 | [1] | GROMMET | |
| 11. | 291-8387 CY | [1] | PANEL GP-CIRCUIT BREAKER | |
| 12. | 033-8248 | [4] | CLIP (LOOP) | |
| 13. | 0L-1407 C | [1] | GROMMET | |
| 14. | 130-5300 | [8] | CLIP | |
| 15. | 139-1398 | [1] | CLIP (LOOP) | |
| 16. | 3E-6769 | [1] | SEAL-O-RING | |
| 17. | 3E-6909 | [1] | CLIP (LOOP) | |
| 18. | 3J-1907 | [1] | SEAL-O-RING | |
| 19. | 4D-7794 C | [1] | CLIP | |
| 20. | 4P-8134 C | [1] | CLIP (LADDER) | |
| 21. | 6D-3479 C | [1] | CLIP (LOOP) | |
| 22. | 7C-4354 C | [2] | CLIP | |
| 23. | 7D-7233 | [5] | CLIP (LOOP) | |
| 24. | 8M-2773 | [1] | CLIP (LOOP) | |
| 25. | 8S-7583 | [1] | GROMMET | |
| 26. | 8T-4121 C | [23] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 CM | [8] | NUT (M10X1.5-THD) | |
| 28. | 8T-4137 M | [11] | BOLT (M10X1.5X20-MM) | |
| 29. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 30. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 31. | 8T-5436 M | [4] | BOLT (M10X1.5X130-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| D | ORDER BY THE METER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38740454
241-0642: WIRING GP-CHASSIS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 7K-1181 | [32] | STRAP-CABLE | |
| 2. | 118-6365 | [1] | PLATE AS | |
| 6V-6716 | [2] | RIVET-TRUSS HEAD | ||
| 3. | 264-4297 C | [1] | SENSOR AS-TEMPERATURE (2-PIN)(HYDRAULIC OIL) | |
| 4. | 327-4608 C | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 178-3620 | [1] | STRAP-DUAL CLAMP | |
| 6. | 188-6252 | [1] | FILM-INSTRUCTION (HOOD TILT) | |
| 7. | 216-7166 | [1] | PLATE AS | |
| 6V-6716 | [2] | RIVET-TRUSS HEAD | ||
| 109-1645 | [1] | CLIP | ||
| 8. | 298-3649 | [1] | HARNESS AS-CHASSIS | |
| 9. | 301-2980 C | [1] | SWITCH AS-TOGGLE (HOOD TILT ACTUATOR) | |
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 10. | 289-3038 | [1] | GROMMET | |
| 11. | 291-8387 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 12. | 033-8248 | [4] | CLIP (LOOP) | |
| 13. | 0L-1407 | [1] | GROMMET | |
| 14. | 130-5300 | [8] | CLIP | |
| 15. | 139-1398 | [1] | CLIP (LOOP) | |
| 16. | 3E-6769 | [1] | SEAL-O-RING | |
| 17. | 3E-6909 | [1] | CLIP (LOOP) | |
| 18. | 3J-1907 | [1] | SEAL-O-RING | |
| 19. | 4D-7794 | [1] | CLIP | |
| 20. | 4P-8134 | [1] | CLIP (LADDER) | |
| 21. | 6D-3479 | [1] | CLIP (LOOP) | |
| 22. | 7C-4354 | [2] | CLIP | |
| 23. | 7D-7233 | [5] | CLIP (LOOP) | |
| 24. | 8M-2773 | [1] | CLIP (LOOP) | |
| 25. | 8S-7583 | [1] | GROMMET | |
| 26. | 8T-4121 | [23] | WASHER-HARD (11X21X2.5-MM THK) | |
| 27. | 8T-4133 M | [8] | NUT (M10X1.5-THD) | |
| 28. | 8T-4137 M | [11] | BOLT (M10X1.5X20-MM) | |
| 29. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 30. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 31. | 8T-5436 M | [4] | BOLT (M10X1.5X130-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38740455
306-5349: WIRING GP-CHASSIS
306-5349 WIRING GP-CHASSIS -VARIABLE PITCH FAN
S/N K6K1-UP
PART OF 305-5294 CONTROL AR-FAN
S/N K6K1-UP
PART OF 305-5294 CONTROL AR-FAN
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 269-7678 | [1] | CLIP | |
| 2. | 306-5352 | [1] | HARNESS AS-CHASSIS (VARIABLE PITCH FAN) | |
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 114-8843 E | SLEEVE-PLASTIC (80-CM) | |||
| 9X-3402 | [7] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [7] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 2L-8054 | [1] | TERMINAL-RING (6-GA, 1/2-IN SCREW) | ||
| -OR- | ||||
| 2L-8061 | [1] | TERMINAL-RING (8-GA, 1/2-IN SCREW) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 3. | 322-0931 | [1] | BRACKET AS | |
| 4. | 8T-4137 M | [2] | BOLT (M10X1.5X20-MM) | |
| 5. | 352-3964 | [1] | CLIP (LADDER) | |
| 6. | 3S-2093 | [4] | STRAP-CABLE | |
| 7. | 7K-1181 B | [24] | STRAP-CABLE | |
| 8. | 8T-4121 | [2] | WASHER-HARD (11X21X2.5-MM THK) | |
| B | USE AS REQUIRED | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
#SEBP38740456
324-0692: WIRING GP-CHASSIS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [13] | STRAP-CABLE | |
| 2. | 7K-1181 | [33] | STRAP-CABLE | |
| 3. | 118-6365 | [1] | PLATE AS | |
| 4. | 154-6626 | [1] | BRACKET AS | |
| 5. | 188-6252 | [1] | FILM-INSTRUCTION (HOOD TILT) | |
| 6. | 193-3973 | [23] | STRAP-CABLE | |
| 7. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(REAR AXLE OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR (CONNECTOR) | ||
| 8. | 324-0688 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 9. | 324-0689 | [1] | BRACKET | |
| 10. | 324-0691 | [1] | HARNESS AS-CHASSIS | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| E | SLEEVE-PLASTIC (20-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (80-CM) | |||
| 9X-3402 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [20] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 155-2258 | [1] | WEDGE-PLUG LOCK (12-PIN) | ||
| 11. | 324-0703 Y | [1] | FASTENER GP-WIRING HARNESS (TRANSMISSION) | |
| 12. | 327-4608 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (28-CM) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 033-8248 | [4] | CLIP (LOOP) | |
| 14. | 130-5300 | [8] | CLIP | |
| 15. | 132-5789 | [2] | CLIP (LADDER) | |
| 16. | 204-8000 | [15] | MOUNTING-CABLE TIE | |
| 17. | 301-2980 | [1] | SWITCH AS-TOGGLE (HOOD TILT ACTUATOR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 18. | 3E-6769 | [1] | SEAL-O-RING | |
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 3P-3839 | [1] | GROMMET | |
| 21. | 4P-7581 | [4] | CLIP (LADDER) | |
| 22. | 7D-7233 | [6] | CLIP (LOOP) | |
| 23. | 8S-7583 | [1] | GROMMET | |
| 24. | 8T-4121 | [33] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 M | [6] | NUT (M10X1.5-THD) | |
| 26. | 8T-4136 M | [19] | BOLT (M10X1.5X25-MM) | |
| 27. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 28. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 29. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 32. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 33. | 124-3019 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38740457
324-0692: WIRING GP-CHASSIS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 C | [1] | STRAP-CABLE | |
| 2. | 7K-1181 | [43] | STRAP-CABLE | |
| 3. | 118-6365 | [1] | PLATE AS | |
| 4. | 154-6626 | [1] | BRACKET AS | |
| 5. | 116-8247 C | [1] | PLATE-INSTRUCTION (HOOD TILT) | |
| 6. | 193-3973 | [23] | STRAP-CABLE | |
| 7. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(REAR AXLE OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR (CONNECTOR) | ||
| 8. | 324-0688 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 9. | 324-0689 | [1] | BRACKET | |
| 10. | 324-0691 | [1] | HARNESS AS-CHASSIS | |
| 155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
| 155-2260 | [1] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2270 | [4] | KIT-CONNECTING PLUG (2-PIN) | ||
| (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 8T-8737 | [3] | PLUG-SEAL | ||
| 114-8843 E | SLEEVE-PLASTIC (20-CM) | |||
| 114-8845 E | SLEEVE-PLASTIC (80-CM) | |||
| 9X-3402 | [20] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1768 | [20] | SOCKET-CONNECTOR (14-GA TO 16-GA) | ||
| 125-7874 E | TUBE-HEAT SHRINK (5.72-MM DIA)(10-CM) | |||
| 11. | 324-0703 Y | [1] | FASTENER GP-WIRING HARNESS (TRANSMISSION) | |
| 12. | 327-4608 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (28-CM) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 033-8248 | [4] | CLIP (LOOP) | |
| 14. | 130-5300 | [8] | CLIP | |
| 15. | 132-5789 | [2] | CLIP (LADDER) | |
| 16. | 204-8000 | [15] | MOUNTING-CABLE TIE | |
| 17. | 301-2980 | [1] | SWITCH AS-TOGGLE (HOOD TILT ACTUATOR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 18. | 3E-6769 | [1] | SEAL-O-RING | |
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 3P-3839 | [1] | GROMMET | |
| 21. | 4P-7581 | [4] | CLIP (LADDER) | |
| 22. | 7D-7233 C | [4] | CLIP (LOOP) | |
| 23. | 8S-7583 | [1] | GROMMET | |
| 24. | 8T-4121 C | [32] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 CM | [7] | NUT (M10X1.5-THD) | |
| 26. | 8T-4136 CM | [18] | BOLT (M10X1.5X25-MM) | |
| 27. | 8T-4137 CM | [6] | BOLT (M10X1.5X20-MM) | |
| 28. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 29. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 32. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 33. | 124-3019 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 34. | 139-1398 C | [2] | CLIP (LOOP) | |
| 35. | 4H-1225 | [1] | WASHER (11X22X6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38740458
324-0692: WIRING GP-CHASSIS
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [1] | STRAP-CABLE | |
| 2. | 7K-1181 C | [44] | STRAP-CABLE | |
| 3. | 118-6365 | [1] | PLATE AS | |
| 4. | 154-6626 | [1] | BRACKET AS | |
| 5. | 116-8247 | [1] | PLATE-INSTRUCTION (HOOD TILT) | |
| 6. | 193-3973 | [23] | STRAP-CABLE | |
| 7. | 264-4297 | [1] | SENSOR AS-TEMPERATURE (2-PIN)(REAR AXLE OIL) | |
| 137-6645 | [1] | PAD-CONNECTOR (CONNECTOR) | ||
| 8. | 324-0688 Y | [1] | PANEL GP-CIRCUIT BREAKER | |
| 9. | 324-0689 | [1] | BRACKET | |
| 10. | 365-6324 CY | [1] | HARNESS AS-CHASSIS | |
| 11. | 324-0703 Y | [1] | FASTENER GP-WIRING HARNESS (TRANSMISSION) | |
| 12. | 327-4608 | [1] | SWITCH AS-PRESSURE (PARKING BRAKE OIL) | |
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 9X-1813 E | SLEEVE (28-CM) | |||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 13. | 033-8248 | [4] | CLIP (LOOP) | |
| 14. | 130-5300 | [8] | CLIP | |
| 15. | 132-5789 | [2] | CLIP (LADDER) | |
| 16. | 204-8000 | [15] | MOUNTING-CABLE TIE | |
| 17. | 301-2980 | [1] | SWITCH AS-TOGGLE (HOOD TILT ACTUATOR) | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 8T-8729 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 112-4550 E | SLEEVE (21-CM) | |||
| 266-7191 | [1] | SWITCH AS-TOGGLE (HOOD TILT ACTUATOR) | ||
| 6T-3631 | [2] | NUT-HEX (15/32-32-THD) | ||
| 6T-3632 | [1] | LOCKWASHER | ||
| 6T-3633 | [1] | RING-LOCKING | ||
| 18. | 3E-6769 | [1] | SEAL-O-RING | |
| 19. | 3J-1907 | [1] | SEAL-O-RING | |
| 20. | 3P-3839 | [1] | GROMMET | |
| 21. | 4P-7581 | [4] | CLIP (LADDER) | |
| 22. | 7D-7233 | [4] | CLIP (LOOP) | |
| 23. | 8S-7583 | [1] | GROMMET | |
| 24. | 8T-4121 | [32] | WASHER-HARD (11X21X2.5-MM THK) | |
| 25. | 8T-4133 M | [7] | NUT (M10X1.5-THD) | |
| 26. | 8T-4136 M | [18] | BOLT (M10X1.5X25-MM) | |
| 27. | 8T-4137 M | [6] | BOLT (M10X1.5X20-MM) | |
| 28. | 8T-4138 M | [2] | BOLT (M6X1X20-MM) | |
| 29. | 8T-4195 M | [1] | BOLT (M10X1.5X30-MM) | |
| 30. | 8T-4223 | [1] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 31. | 8T-4244 M | [1] | NUT (M12X1.75-THD) | |
| 32. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 33. | 124-3019 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 34. | 139-1398 | [2] | CLIP (LOOP) | |
| 35. | 4H-1225 | [1] | WASHER (11X22X6-MM THK) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| E | ORDER BY THE CENTIMETER | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP38740459
244-6524: WIRING GP-ELECTRIC CLUTCH
244-6524 WIRING GP-ELECTRIC CLUTCH -AXLE OIL COOLER PUMP
S/N K6K1-396
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL
S/N K6K1-396
PART OF 241-0073, 311-7019 COOLER AR-AXLE OIL
For full view, you need register
Parts for your 962H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3E-5239 | [1] | RELAY AS (24-VOLT)(AXLE OIL COOLER) | |
| 2. | 7K-1181 | [1] | STRAP-CABLE | |
| 3. | 191-7699 | [1] | BRACKET AS | |
| 8T-3490 M | [1] | NUT-WELD (M10X1.5-THD) | ||
| 4. | 130-5300 | [1] | CLIP | |
| 5. | 147-0385 | [1] | CLIP | |
| 6. | 3E-9854 M | [1] | BOLT (M8X1.25X20-MM) | |
| 7. | 8T-4121 | [1] | WASHER-HARD (11X21X2.5-MM THK) | |
| 8. | 8T-4136 M | [1] | BOLT (M10X1.5X25-MM) | |
| 9. | 8T-4224 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| M | METRIC PART | |||
