AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

TK711 Track Feller Buncher 10100001-UP (MACHINE) POWERED BY C-9 Engine BASIC ENGINE Caterpillar SIS



TRACK FELLER BUNCHER TK711 TRACK FELLER BUNCHER 101
 TK711 Track Feller Buncher 10100001-UP (MACHINE) POWERED BY C-9 Engine SEBP3882 TK711 101   (2001)

Parts group TK711:

  For full view, you need register
BASIC ENGINE
BELT TIGHTENER GP
BELT TENSIONER GP
224-7846 BELT TENSIONER GP
224-7846 BELT TENSIONER GP
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
CAMSHAFT GP
CAMSHAFT GP
164-6100 CAMSHAFT GP
164-6100 CAMSHAFT GP
S/N 4ZF4479-UP
PART OF 216-4804 ENGINE AR-CORE
CRANKSHAFT GP
CRANKSHAFT GP
164-6148 CRANKSHAFT GP
164-6148 CRANKSHAFT GP
S/N 4ZF4479-UP
PART OF 216-4804 ENGINE AR-CORE
SEAL GP-CRANKSHAFT
178-3899 SEAL GP-CRANKSHAFT
178-3899 SEAL GP-CRANKSHAFT
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
202-3301 COVER GP-CYLINDER BLOCK
202-3301 COVER GP-CYLINDER BLOCK -CRANKCASE
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
CYLINDER BLOCK AS
325-3915 CYLINDER BLOCK AS
325-3915 CYLINDER BLOCK AS
S/N 4ZF4479-UP
PART OF 220-1952 CYLINDER BLOCK GP
CYLINDER BLOCK GP
220-1951 CYLINDER BLOCK GP
220-1951 CYLINDER BLOCK GP
S/N 4ZF4479-UP
PART OF 216-4804 ENGINE AR-CORE
CYLINDER BLOCK GP
220-1952 CYLINDER BLOCK GP
220-1952 CYLINDER BLOCK GP
S/N 4ZF4479-UP
PART OF 220-1951 CYLINDER BLOCK GP
297-4841 KIT-SEAL
297-4841 KIT-SEAL -SINGLE FUEL INJECTOR
S/N 1011-UP
FIELD INSTALLATION
PLUG GP-ENGINE
169-3105 PLUG GP-ENGINE
169-3105 PLUG GP-ENGINE
S/N 4ZF4479-UP
REQUIRED WHEN NO AIR COMPRESSOR IS USED
PART OF 216-4802 ENGINE AR
CYLINDER HEAD GP
CYLINDER HEAD AS
311-7225 CYLINDER HEAD AS
311-7225 CYLINDER HEAD AS
S/N 4ZF4479-UP
PART OF 210-5984 CYLINDER HEAD GP
CYLINDER HEAD AS
311-7226 CYLINDER HEAD AS
311-7226 CYLINDER HEAD AS
S/N 4ZF20655-UP
PART OF 273-3034 CYLINDER HEAD GP
CYLINDER HEAD GP
210-5984 CYLINDER HEAD GP
210-5984 CYLINDER HEAD GP
S/N 4ZF4479-20654; 4ZF21574-24534; 4ZF24629-25104
PART OF 210-5987 CYLINDER HEAD GP
CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
S/N 4ZF4479-20654
PART OF 216-4804 ENGINE AR-CORE
CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
S/N 4ZF20655-21573
PART OF 216-4804 ENGINE AR-CORE
CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
S/N 4ZF21574-24534
PART OF 216-4804 ENGINE AR-CORE
CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
S/N 4ZF24535-24628
PART OF 216-4804 ENGINE AR-CORE
CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
S/N 4ZF24629-25104
PART OF 216-4804 ENGINE AR-CORE
CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
210-5987 CYLINDER HEAD GP
S/N 4ZF25105-UP
PART OF 216-4804 ENGINE AR-CORE
CYLINDER HEAD GP
273-3034 CYLINDER HEAD GP
273-3034 CYLINDER HEAD GP
S/N 4ZF20655-21573; 4ZF24535-24628; 4ZF25105-UP
PART OF 210-5987 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
167-0171 FASTENER GP-CYLINDER HEAD
167-0171 FASTENER GP-CYLINDER HEAD
S/N 4ZF4479-25104
PART OF 210-5987 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
290-6884 FASTENER GP-CYLINDER HEAD
290-6884 FASTENER GP-CYLINDER HEAD
S/N 4ZF25105-UP
PART OF 210-5987 CYLINDER HEAD GP
PLUG GP-ENGINE
169-3105 PLUG GP-ENGINE
169-3105 PLUG GP-ENGINE
S/N 4ZF4479-UP
REQUIRED WHEN NO AIR COMPRESSOR IS USED
PART OF 216-4802 ENGINE AR
DAMPER GP
DAMPER & PULLEY GP
190-0795 DAMPER & PULLEY GP
190-0795 DAMPER & PULLEY GP
S/N 4ZF4479-UP
PROVIDES AN 8 GROOVE POLY-VEE BELT CRANKSHAFT PULLEY AND VISCONIC DAMPER GP
PART OF 216-4802 ENGINE AR
DRIVE GP-FAN
DRIVE GP-FAN
231-6686 DRIVE GP-FAN
231-6686 DRIVE GP-FAN
S/N 1011-UP
PART OF 216-9871 FAN GP-SUCTION
AN ATTACHMENT
ENGINE GP
471-6157 KIT-ENGINE GASKET
471-6157 KIT-ENGINE GASKET
S/N 4ZF4479-UP; THX1-UP
OIL COOLER AND LINES
FIELD INSTALLATION
FLYWHEEL GP
FASTENER GP-FLYWHEEL
117-2794 FASTENER GP-FLYWHEEL
117-2794 FASTENER GP-FLYWHEEL
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
CANNOT BE USED WITH GEAR GP-REAR (RPTO)
FLYWHEEL GP
116-5386 FLYWHEEL GP
116-5386 FLYWHEEL GP
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
Type 1
FLYWHEEL GP
116-5386 FLYWHEEL GP
116-5386 FLYWHEEL GP
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
Type 2
GEAR GP
GEAR GP-FRONT
155-7918 GEAR GP-FRONT
155-7918 GEAR GP-FRONT
S/N 4ZF4479-UP
PART OF 216-4804 ENGINE AR-CORE
HOUSING GP-FRONT
165-4446 HOUSING GP-FRONT
165-4446 HOUSING GP-FRONT
S/N 4ZF4479-6874
PART OF 216-4804 ENGINE AR-CORE
HOUSING GP-FRONT
165-4446 HOUSING GP-FRONT
165-4446 HOUSING GP-FRONT
S/N 4ZF6875-UP
PART OF 216-4804 ENGINE AR-CORE
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
133-3089 COVER GP-FLYWHEEL HOUSING
133-3089 COVER GP-FLYWHEEL HOUSING
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
FOR USE WITH RH MOUNTED STARTER
HOUSING GP-FLYWHEEL
187-0473 HOUSING GP-FLYWHEEL
187-0473 HOUSING GP-FLYWHEEL
S/N 4ZF4479-6721
PART OF 216-4802 ENGINE AR
HOUSING GP-FLYWHEEL
187-0473 HOUSING GP-FLYWHEEL
187-0473 HOUSING GP-FLYWHEEL
S/N 4ZF6722-UP
PART OF 216-4802 ENGINE AR
HOUSING GP-FRONT
COVER GP-FRONT HOUSING
211-3285 COVER GP-FRONT HOUSING
211-3285 COVER GP-FRONT HOUSING
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
GEAR GP-FRONT
155-7918 GEAR GP-FRONT
155-7918 GEAR GP-FRONT
S/N 4ZF4479-UP
PART OF 216-4804 ENGINE AR-CORE
HOUSING GP-FRONT
165-4446 HOUSING GP-FRONT
165-4446 HOUSING GP-FRONT
S/N 4ZF4479-6874
PART OF 216-4804 ENGINE AR-CORE
HOUSING GP-FRONT
165-4446 HOUSING GP-FRONT
165-4446 HOUSING GP-FRONT
S/N 4ZF6875-UP
PART OF 216-4804 ENGINE AR-CORE
424-1425 KIT-FRONT COVER GASKET
424-1425 KIT-FRONT COVER GASKET
S/N 1011-UP
CONTAINS THE GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION
LIFTING GP-ENGINE
LIFTING GP-ENGINE
191-3063 LIFTING GP-ENGINE
191-3063 LIFTING GP-ENGINE
S/N 4ZF4479-UP
FRONT AND REAR
PART OF 216-4802 ENGINE AR
MOUNTING GP-ENGINE
MOUNTING GP-ENGINE
216-9855 MOUNTING GP-ENGINE
216-9855 MOUNTING GP-ENGINE
S/N 1011-UP
PART OF 213-2400 INSTALLATION AR-ENGINE
SUPPORT GP-ENGINE
172-0961 SUPPORT GP-ENGINE
172-0961 SUPPORT GP-ENGINE
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
PAN GP-OIL
PAN GP-OIL
219-9943 PAN GP-OIL
219-9943 PAN GP-OIL
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
PISTON & ROD GP
PISTON & ROD GP
177-7878 PISTON & ROD GP
177-7878 PISTON & ROD GP
S/N 4ZF4479-UP
FRACTURED ROD/NON EXHAUST GAS RECIRCULATION
PART OF 216-4804 ENGINE AR-CORE
PISTON & ROD GP
188-9141 PISTON & ROD GP
188-9141 PISTON & ROD GP
S/N 4ZF4479-UP
16.1:1 RATIO
PART OF 177-7878 PISTON & ROD GP
VALVE MECHANISM GP
COVER GP-VALVE MECHANISM
164-6490 COVER GP-VALVE MECHANISM
164-6490 COVER GP-VALVE MECHANISM
S/N 4ZF4479-23503
PROVIDES FRONT OIL FILL ON TOP OF COVER AND THREADED OIL FILLER CAP
PART OF 216-4802 ENGINE AR
COVER GP-VALVE MECHANISM
164-6490 COVER GP-VALVE MECHANISM
164-6490 COVER GP-VALVE MECHANISM
S/N 4ZF23504-25257
PROVIDES FRONT OIL FILL ON TOP OF COVER AND THREADED OIL FILLER CAP
PART OF 216-4802 ENGINE AR
COVER GP-VALVE MECHANISM
164-6490 COVER GP-VALVE MECHANISM
164-6490 COVER GP-VALVE MECHANISM
S/N 4ZF25258-UP
PROVIDES FRONT OIL FILL ON TOP OF COVER AND THREADED OIL FILLER CAP
PART OF 216-4802 ENGINE AR
ROCKER ARM GP
213-9320 ROCKER ARM GP
213-9320 ROCKER ARM GP -EXHAUST
S/N 4ZF4479-UP
PART OF 215-9571 VALVE MECHANISM GP
ROCKER ARM GP
213-9321 ROCKER ARM GP
213-9321 ROCKER ARM GP -INLET
S/N 4ZF4479-UP
PART OF 215-9571 VALVE MECHANISM GP
VALVE MECHANISM GP
155-7927 VALVE MECHANISM GP
155-7927 VALVE MECHANISM GP
S/N 4ZF4479-UP
PART OF 216-4804 ENGINE AR-CORE
VALVE MECHANISM GP
215-9571 VALVE MECHANISM GP
215-9571 VALVE MECHANISM GP
S/N 4ZF4479-UP
PART OF 155-7927 VALVE MECHANISM GP
COVER GP-ENGINE
424-1425 KIT-FRONT COVER GASKET
424-1425 KIT-FRONT COVER GASKET
S/N 1011-UP
CONTAINS THE GASKETS, SEALS AND BENDABLE LOCKS TO REINSTALL THE FRONT COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
FIELD INSTALLATION

Information:

(For parts list, see above)

Specifications
Air Compressor
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Air Compressor - Remove and Install
C9
Engine For Caterpillar Built Machines
Air Compressor Drive Gear - Remove
C9
Engine For Caterpillar Built Machines
Air Compressor Drive Gear - Install
C9
Engine For Caterpillar Built Machines
Service Magazine
Repair Guidelines for Air Compressors {1803}
2003/08/25
A New Diagnostic Kit for the Evaluation of Air Compressor Operation is Introduced {1803}
2004/11/15
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
TK711, TK721, TK722 and TK732 Track Feller Bunchers
Special Instruction
Belt Idler Gp Install Procedure{1207, 1356, 1357, 1358, 1397}
Belt Idler Gp Install Procedure{1207, 1356, 1357, 1358, 1397}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
Service Letter-Australia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
Service Letter-CFEL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
Service Letter-CSARL
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
Service Letter-Americas
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
Specifications
Belt Tension Chart
C-9 Engines for Caterpillar Built Machines
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
Service Letter-Asia
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE ALTERNATOR SUPPORT BRACKET ON CERTAIN TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
Disassembly and Assembly
Belt Tensioner - Remove and Install
C9
Engine For Caterpillar Built Machines
Belt Tensioner - Remove and Install
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Engine Supplement
Service Magazine
A New Belt Idler Group Is Now Used on Track Feller Bunchers {1207, 1358, 1397}
2012/02/27
Specifications
Compression Brake
C-9 Engines for Caterpillar Built Machines
Testing and Adjusting
Slave Piston Lash - Adjust
C-9 Engines for Caterpillar Built Machines
Specifications
Camshaft
C-9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Testing and Adjusting
Excessive Bearing Wear - Inspect
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Camshaft Gear - Remove and Install
C9
Engine For Caterpillar Built Machines
Camshaft Bearings - Remove
C9
Engine For Caterpillar Built Machines
Camshaft Bearings - Install
C9 Engines for Caterpillar Built Machines
Camshaft - Remove
C9
Engine For Caterpillar Built Machines
Camshaft - Install
C9 Engines for Caterpillar Built Machines
Service Magazine
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/06/25
Engine News
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Engines {1202}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT CRANKSHAFT SEALS ON CERTAIN 3126, 3126B, AND C-9 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT CRANKSHAFT SEALS ON CERTAIN 3126, 3126B, AND C-9 ENGINES
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-Truck/Ag/Marine
Specifications
Crankshaft Seals
C-9 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C-9 Engines for Caterpillar Built Machines
Main Bearing Journal
C-9 Engines for Caterpillar Built Machines
Crankshaft
C-9 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT CRANKSHAFT SEALS ON CERTAIN 3126, 3126B, AND C-9 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT CRANKSHAFT SEALS ON CERTAIN 3126, 3126B, AND C-9 ENGINES
Service Letter-Asia
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT CRANKSHAFT SEALS ON CERTAIN 3126, 3126B, AND C-9 ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE FRONT CRANKSHAFT SEALS ON CERTAIN 3126, 3126B, AND C-9 ENGINES
Testing and Adjusting
Excessive Bearing Wear - Inspect
C-9 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C9 Engines for Caterpillar Built Machines
Crankshaft - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft - Install
C9 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove
C9
Engine For Caterpillar Built Machines
Crankshaft Front Seal - Install
C9
Engine For Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C9
Engine For Caterpillar Built Machines
Crankshaft Rear Seal - Remove
C9
Engine For Caterpillar Built Machines
Crankshaft Rear Seal - Install
C9 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Remove and Install - Engine in Chassis
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Engine Supplement
Crankshaft Front Seal - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Front Seal - Install
C9 Engines for Caterpillar Built Machines
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Improved Crankshaft Rear Seals are Used on Certain C9 Machine Engines {1161, 7555}
2014/09/19
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
A New Seal Sleeve Combination is Now Available for Field Repair on certain 3176, C9, C9.3, C10, C11, C12, and C13 Machine Engines {1202}
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Visual Inspection of Liner Seats for 3400, C15, C16, and C18 Series Engines{1200}
Specifications
Cylinder Block
C-9 Engines for Caterpillar Built Machines
Cylinder Liner
C-9 Engines for Caterpillar Built Machines
Main Bearing Journal
C-9 Engines for Caterpillar Built Machines
Cylinder Liner Projection
C-9 Engines for Caterpillar Built Machines
Cylinder Block Cover Group
C-9 Engines for Caterpillar Built Machines
Tool Operating Manual
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
Using the 8T-2700 Blowby/Air Flow Indicator{0781, 0785, 1317}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Testing and Adjusting
Cylinder Block - Inspect
C-9 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C-9 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C-9 Engines for Caterpillar Built Machines
Main Bearings - Inspect
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C9 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9
Engine For Caterpillar Built Machines
Cylinder Liner - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Remove
C9 Engines for Caterpillar Built Machines
Crankshaft Main Bearings - Install
C9
Engine For Caterpillar Built Machines
Cylinder Liner - Install
C9 Engines for Caterpillar Built Machines
Cylinder Block Cover - Remove and Install
C9
Engine For Caterpillar Built Machines
Camshaft Bearings - Remove
C9
Engine For Caterpillar Built Machines
Camshaft Bearings - Install
C9 Engines for Caterpillar Built Machines
Cylinder Block Cover - Remove and Install
C9 Engines for Caterpillar Built Machines
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure for Troubleshooting and Cleaning the Oil Rail System for the Hydraulic Electronic Unit Injector (HEUI) {1100, 1126, 1250, 1251, 1261, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Procedure to Improve Fuel Injectors on Certain Machine Engines {1100, 1126, 1250, 1251, 1290}
Technical Information Bulletin
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
Correct Usage of the Oil Rail Plug for the Cylinder Head on C9 Engines{1100}
Specifications
Cylinder Head
C-9 Engines for Caterpillar Built Machines
Cylinder Head Valves
C-9 Engines for Caterpillar Built Machines
Tool Operating Manual
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Applied Failure Analysis
Engine Valve Failure Modes{1100, 1105}
Engine Valve Failure Modes{1100, 1105}
Information Release Memo
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
CAT REMAN ANNOUNCES ADDITIONAL CYLINDER HEAD RELEASES
Testing and Adjusting
Engine Valve Lash - Inspect/Adjust
C-9 Engines for Caterpillar Built Machines
Troubleshooting
Valve Rotator or Spring Lock Is Free
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Disassembly and Assembly
Rocker Arm and Shaft - Remove
C9 Engines for Caterpillar Built Machines
Rocker Arm and Shaft - Install
C9
Engine For Caterpillar Built Machines
Unit Injector Sleeve - Remove
C9 Engines for Caterpillar Built Machines
Unit Injector Sleeve - Install
C9 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Guides - Remove and Install
C9 Engines for Caterpillar Built Machines
Inlet and Exhaust Valve Seat Inserts - Remove and Install
C9 Engines for Caterpillar Built Machines
Inlet and Exhaust Valves - Remove and Install
C9
Engine For Caterpillar Built Machines
Cylinder Head - Remove
C9
Engine For Caterpillar Built Machines
Cylinder Head - Install
C9
Engine For Caterpillar Built Machines
Camshaft Bearings - Remove
C9
Engine For Caterpillar Built Machines
Camshaft Bearings - Install
C9 Engines for Caterpillar Built Machines
Cylinder Head - Remove
C9 Engines for Caterpillar Built Machines
Cylinder Head - Install
C9 Engines for Caterpillar Built Machines
Service Magazine
Intake Valves are Sticking in Cold Climates {1100, 1105, 7620}
2005/08/15
Caterpillar Warranty Claims on Cylinder Head Valves {1105}
2005/10/03
A New O-ring for the Injector Sleeve is Now Used {1100}
2007/12/24
Diagnostic Publications for the Systems of the Hydraulic Electronic Unit Injector (HEUI) have been Updated {1100, 1126, 1250, 1251, 1261, 1290}
2009/08/10
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Testing and Adjusting
Vibration Damper - Check
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C9
Engine For Caterpillar Built Machines
Vibration Damper and Pulley - Remove and Install
C9 Engines for Caterpillar Built Machines
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
TK711, TK721, TK722 and TK732 Track Feller Bunchers
Specifications
Fan Drive
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Belt Tensioner - Remove and Install
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Engine Supplement
Fan Drive - Remove
C9 Engines for Caterpillar Built Machines
Fan Drive - Install
C9 Engines for Caterpillar Built Machines
Fan Drive - Disassemble
C9 Engines for Caterpillar Built Machines
Fan Drive - Assemble
C9 Engines for Caterpillar Built Machines
Special Instruction
Oil and Your Engine {1000}
Oil and Your Engine {1000}
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Specifications
Flywheel Housing
C-9 Engines for Caterpillar Built Machines
Flywheel
C-9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Testing and Adjusting
Flywheel - Inspect
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel - Remove
C9
Engine For Caterpillar Built Machines
Flywheel - Install
C9
Engine For Caterpillar Built Machines
Flywheel - Remove
C9 Engines for Caterpillar Built Machines
Flywheel - Install
C9 Engines for Caterpillar Built Machines
Engine News
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/14
Specifications
Gear Group (Front)
C-9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Testing and Adjusting
Gear Group (Front) - Time
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Gear Group (Rear) - Remove and Install
C9 Engines for Caterpillar Built Machines
Service Magazine
An Improved Front Gear Train Timing Procedure Is Used for 3406E, 3456, C-15, C-16, C15, and C18 Engines {1206}
2012/12/13
Specifications
Flywheel Housing
C-9 Engines for Caterpillar Built Machines
Testing and Adjusting
Flywheel Housing - Inspect
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Flywheel Housing - Remove and Install
C9
Engine For Caterpillar Built Machines
Flywheel Housing - Remove and Install
C9 Engines for Caterpillar Built Machines
Flywheel Housing - Remove and Install
C9 Engines for Caterpillar Built Machines
Specifications
Crankshaft Seals
C-9 Engines for Caterpillar Built Machines
Front Housing and Covers
C-9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Disassembly and Assembly
Front Cover - Remove
C9
Engine For Caterpillar Built Machines
Front Cover - Install
C9
Engine For Caterpillar Built Machines
Housing (Front) - Remove
C9 Engines for Caterpillar Built Machines
Housing (Front) - Install
C9
Engine For Caterpillar Built Machines
Front Cover - Remove
C9 Engines for Caterpillar Built Machines
Front Cover - Install
C9 Engines for Caterpillar Built Machines
Technical Information Bulletin
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Operation and Maintenance Manual
Engine Oil and Filter - Change
TK711, TK721, TK722 and TK732 Track Feller Bunchers
Engine Oil Sample - Obtain
TK711, TK721, TK722 and TK732 Track Feller Bunchers
Engine Oil Level - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers
Specifications
Engine Oil Pan
C-9 Engines for Caterpillar Built Machines
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Disassembly and Assembly
Engine Oil Pan - Remove and Install
C9
Engine For Caterpillar Built Machines
Engine Oil Pan - Remove and Install
C9 Engines for Caterpillar Built Machines
Service Magazine
The Oil Pan Gasket now Requires a Gasket Sealant to be Used {1302, 7555}
2003/07/21
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
There is New Information on the Oil Grade Plug {1000, 1348}
2003/04/14
Special Instruction
Replacement of the Double Notch Piston Skirts on C9 Engines{1225}
Replacement of the Double Notch Piston Skirts on C9 Engines{1225}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Technical Information Bulletin
Specifications
Piston and Rings
C-9 Engines for Caterpillar Built Machines
Connecting Rod Bearing Journal
C-9 Engines for Caterpillar Built Machines
Connecting Rod
C-9 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Information Release Memo
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
NEW FRACTURED SPLIT ROD IS CURRENTLY PRODUCTION RELEASED FOR THE C9, 3114, 3116 AND 3126 ENGINES
Testing and Adjusting
Engine Crankcase Pressure (Blowby) - Test
C-9 Engines for Caterpillar Built Machines
Compression - Test
C-9 Engines for Caterpillar Built Machines
Excessive Bearing Wear - Inspect
C-9 Engines for Caterpillar Built Machines
Cylinder Liner Projection - Inspect
C-9 Engines for Caterpillar Built Machines
Piston Ring Groove - Inspect
C-9 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Inspect
C-9 Engines for Caterpillar Built Machines
Disassembly and Assembly
Bearing Clearance - Check
C9 Engines for Caterpillar Built Machines
Piston Cooling Jets - Remove and Install
C9
Engine For Caterpillar Built Machines
Pistons and Connecting Rods - Remove
C9
Engine For Caterpillar Built Machines
Pistons and Connecting Rods - Install
C9 Engines for Caterpillar Built Machines
Connecting Rod Bearings - Remove
C9
Engine For Caterpillar Built Machines
Connecting Rod Bearings - Install
C9
Engine For Caterpillar Built Machines
Pistons and Connecting Rods - Assemble
C9
Engine For Caterpillar Built Machines
Pistons and Connecting Rods - Disassemble
C9 Engines for Caterpillar Built Machines
Service Magazine
Connecting Rods with Dual Bearing Tab Slots are OK to Use {1218}
2002/11/04
New Guidelines for Inspecting Pistons {1214}
2006/01/02
A New Single Notched Piston Skirt Is Now Used {1225}
2008/11/03
Specifications
Rear Power Take-Off (RPTO)
C-9 Engines for Caterpillar Built Machines
Engine News
A New Idler is Now Available {1358}
2006/01/02
Operation and Maintenance Manual
Belt - Inspect/Adjust/Replace
TK711, TK721, TK722 and TK732 Track Feller Bunchers
Special Instruction
Belt Idler Gp Install Procedure{1207, 1356, 1357, 1358, 1397}
Belt Idler Gp Install Procedure{1207, 1356, 1357, 1358, 1397}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSTALLING A SECONDARY FAN BELT IDLER ON CERTAIN 2390, 2491, 511, 521, 522, 532, 541, 541 SERIES II, 551, 552, 552 SERIES II, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHERS
Disassembly and Assembly
Vibration Damper and Pulley - Remove and Install
C9
Engine For Caterpillar Built Machines
Belt Tensioner - Remove and Install
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Engine Supplement
Vibration Damper and Pulley - Remove and Install
C9 Engines for Caterpillar Built Machines
Service Magazine
A New Belt Idler Group Is Now Used on Track Feller Bunchers {1207, 1358, 1397}
2012/02/27
Reuse And Salvage Guidelines
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Bench Test Procedures
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
Setup and Operation of the 368-8645 Tool Kit (CRANKCASE PRESSURE){1317}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
9U-7370 Belt Tension Tester {0599, 0701}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
Using the 143-2099 Sleeve Replacement Tool Group on 3114, 3116, and 3126 Engines{0374, 0599, 0701, 0706, 0781}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
188-3922 Broken Exhaust Bolt and Stud Removal Group for 3114, 3116, 3126, 3126B, 3176, 3176B, C-10, and C12 Engines{0374, 0599, 0701, 0702, 0703}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
Using the 242-3980 Piston Groove Gauge on 3500A and B Engines with Monotherm Pistons using the 329-2630 and 329-2631 Piston Groove Gauges on 3500B Engines with Monotherm Pistons{0374, 0599, 0700, 0701, 0705}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Using the 9U-5383 Vacuum Tester {0774, 0781, 1000, 1100}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Use the 171-7212 Wear Sleeve to Repair the Crankshaft Hub {1160}
2011/09/20
40 Power Microscope is Available for Inspecting Bearing Journals on Crankshafts {0777, 1202}
2006/01/16
Spanner Wrench is Available for Ecology Drain Valves {1302, 1353, 1372, 5076, 5613}
2006/03/20
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Special Instruction
Belt Idler Gp Install Procedure{1207, 1356, 1357, 1358, 1397}
Belt Idler Gp Install Procedure{1207, 1356, 1357, 1358, 1397}
Specifications
Belt Tension Chart
C-9 Engines for Caterpillar Built Machines
Service Magazine
A New Belt Idler Group Is Now Used on Track Feller Bunchers {1207, 1358, 1397}
2012/02/27
Truck Engine News
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Engine News
A New Guide Spring for the Camshaft Lifter is Now Used {1102}
2008/03/17
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Operation and Maintenance Manual
Engine Valve Lash - Check
TK711, TK721, TK722 and TK732 Track Feller Bunchers
Engine Crankcase Breather - Clean
TK711, TK721, TK722 and TK732 Track Feller Bunchers
Technical Information Bulletin
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Guide Springs and Valve Lifter Assemblies are Breaking in Certain C9 and C9.3 Engines{1108, 1209}
Specifications
Valve Mechanism Cover
C-9 Engines for Caterpillar Built Machines
Valve Mechanism
C-9 Engines for Caterpillar Built Machines
Rocker Shaft
C-9 Engines for Caterpillar Built Machines
Lifter Group
C-9 Engines for Caterpillar Built Machines
Tool Operating Manual
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 155-1536 Valve Recession Tool Kit for all G3500 and 3500 Engines{0374, 0599, 0701, 0703, 0759, 0767}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
Operating Instructions for 148-2997 Valve Recession Tool Group Used On 3600, G3600, and C175 Engines{0374, 0599, 0701, 0703, 0759}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
CRB Valve Spring Testers 8S-2263 and 4C-9496{0374, 0599, 0700, 0701, 1108}
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
9U-5132 Timing and Fuel System Setting Tool Group{1105, 1162, 1290, 1905}
Testing and Adjusting
Finding Top Center Position for No. 1 Piston
C-9 Engines for Caterpillar Built Machines
Engine Valve Lash - Inspect/Adjust
C-9 Engines for Caterpillar Built Machines
Troubleshooting
Excessive Valve Lash
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Disassembly and Assembly
Valve Mechanism Cover - Remove and Install
C9 Engines for Caterpillar Built Machines
Valve Mechanism Cover Base - Remove and Install
C9
Engine For Caterpillar Built Machines
Rocker Arm and Shaft - Remove
C9 Engines for Caterpillar Built Machines
Rocker Arm - Disassemble
C9
Engine For Caterpillar Built Machines
Rocker Arm - Assemble
C9
Engine For Caterpillar Built Machines
Rocker Arm and Shaft - Install
C9
Engine For Caterpillar Built Machines
Lifter Group - Remove and Install
C9
Engine For Caterpillar Built Machines
Service Magazine
A New Guide Spring for the Camshaft Lifter is Now Used {1102}
2008/03/17
An Improved Guide Spring and Valve Lifter Assembly Are Used in Certain Machines Equipped with C-9, C9 ACERT Engines, and C9.3 ACERT Engines {1104, 1108}
2014/07/03
Set Engine Valve Lash After Installing All Remanufactured Long Blocks {1102, 1121, 1123, 1209}
2012/10/08
Reuse And Salvage Guidelines
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Thermal Spray Procedures for Engine Front Cover{0679, 1150, 1151, 1162}
Information Release Memo
ENGINE OVERHAUL KITS FOR C-9 MACHINE ENGINES
ENGINE OVERHAUL KITS FOR C-9 MACHINE ENGINES
Service Magazine
A New Improved Seal Is Now Used in the Reman Water Pumps in the Engines of Certain Machines {1000, 1361, 7555}
2012/05/10
Precious Metals Engine Rebuild Kits Are Available for C-9 Machine Engines {1000}
2013/03/22

Truck sale:

CATERPILLAR TK711 2006
$85,829 USD 
CATERPILLAR TK711 2006
- FOREST MACHINE
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
2006 CAT TK711
USD $86,570 
2006 CAT TK711

TOROMONT CAT - Main
TORONTO, Ontario, Canada
2004 CAT TK711
USD $35,000 
2004 CAT TK711

MILTON CAT
SYRACUSE, New York
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.