AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

216-4802 ENGINE AR S/N 4ZF4479-UP PART OF 213-2394, 262-0998 COMMON AR TK711 TRACK FELLER BUNCHER


ENGINE ARRANGEMENT
ENGINE AR
BASIC ENGINE
BELT TIGHTENER GP
CAMSHAFT GP
CYLINDER BLOCK GP
HOUSING GP-FLYWHEEL
HOUSING GP-FRONT
VALVE MECHANISM GP

TRACK FELLER BUNCHER TK711 TRACK FELLER BUNCHER 101
 TK711 Track Feller Buncher 10100001-UP (MACHINE) POWERED BY C-9 Engine SEBP3882 TK711 101   (2001)

ENGINE ARRANGEMENT

ENGINE AR
216-4802 ENGINE AR
216-4804 ENGINE AR-CORE
INSTALLATION AR-ENGINE
213-2400 INSTALLATION AR-ENGINE
471-6157 KIT-ENGINE GASKET
 

#SEBP38820010
 

216-4802: ENGINE AR

216-4802 ENGINE AR
S/N 4ZF4479-UP
PART OF 213-2394, 262-0998 COMMON AR
i02052442 SEBP3882
  For full view, you need register

Parts for your TK711 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  217-6635 Y [1] ALTERNATOR GP-CHARGING  
  226-3561 Y [1] COMPRESSOR GP-REFRIGERANT  
  165-4468 Y [1] CONTROL & MTG GP-ENGINE ELEK  
    S/N 4ZF4479-10810
  226-3760 Y [1] CONTROL & MTG GP-ENGINE ELEK  
    S/N 4ZF10811-UP
  202-3301 Y [1] COVER GP-CYLINDER BLOCK (CRANKCASE BREATHER)  
  133-3089 Y [1] COVER GP-FLYWHEEL HOUSING  
  211-3285 Y [1] COVER GP-FRONT HOUSING  
  164-6490 Y [1] COVER GP-VALVE MECHANISM  
  190-0795 Y [1] DAMPER & PULLEY GP  
  224-7846 Y [1] BELT TENSIONER GP  
  173-6107 Y [1] ELBOW GP-AIR INLET  
  216-4804 Y [1] ENGINE AR-CORE  
  117-2794 Y [1] FASTENER GP-FLYWHEEL  
  226-3560 Y [1] FILLER GP-ENGINE OIL  
  220-1998 Y [1] FILTER GP-ENGINE OIL  
  116-5386 Y [1] FLYWHEEL GP  
  226-3559 Y [1] FUMES DISPOSAL GP  
  219-9960 Y [1] GAUGE GP-OIL LEVEL (DIPSTICK)  
  118-7284 Y [1] STARTING AID GP (HEATER)  
  187-0473 Y [1] HOUSING GP-FLYWHEEL  
  191-3063 Y [1] LIFTING GP-ENGINE  
  202-6603 Y [1] LINES GP-ENGINE OIL  
  165-4465 Y [1] LINES GP-TURBOCHARGER OIL  
  202-2767 Y [1] LINES GP-WATER  
  202-0996 Y [1] MANIFOLD GP-EXHAUST  
  219-9943 Y [1] PAN GP-OIL  
  169-3105 Y [1] PLUG GP-ENGINE  
  205-4013 Y [1] PLUG GP-WATER LINES  
  202-7674 Y [1] PUMP GP-WATER  
  222-0490 Y [1] REGULATOR GP-FUEL PRESSURE  
  178-3899 Y [1] SEAL GP-CRANKSHAFT  
  165-4469 Y [1] SENSOR GP-ENGINE  
  223-6377 Y [1] STARTING MOTOR GP-ELECTRIC  
  172-0961 Y [1] SUPPORT GP-ENGINE  
  204-3604 Y [1] WIRING GP-ELECTRONIC CONTROL  
   
    GASKET KITS WILL BE PROVIDED WHEN AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP38820011
 

216-4804: ENGINE AR-CORE

216-4804 ENGINE AR-CORE
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
i01848575 SEBP3882
  For full view, you need register

Parts for your TK711 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
  164-6100 Y [1] CAMSHAFT GP  
  188-3826 Y [1] COOLER GP-ENGINE OIL  
  164-6148 Y [1] CRANKSHAFT GP  
  220-1951 Y [1] CYLINDER BLOCK GP  
  210-5987 Y [1] CYLINDER HEAD GP  
  218-0973 [1] ELECTRONICS GP-ENGINE RATINGS  
  155-7918 Y [1] GEAR GP-FRONT  
  165-4446 Y [1] HOUSING GP-FRONT  
  177-7878 Y [1] PISTON & ROD GP  
  191-3517 Y [1] PUMP & MTG GP-UNIT INJ HYD  
  195-8098 Y [1] PUMP GP-ENGINE OIL  
  166-1759 Y [1] PUMP GP-FUEL INJECTION  
  191-5518 Y [1] TURBOCHARGER GP  
  155-7927 Y [1] VALVE MECHANISM GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP38820012
 

213-2400: INSTALLATION AR-ENGINE

213-2400 INSTALLATION AR-ENGINE
S/N 1011-UP
PART OF 213-2394, 262-0998 COMMON AR
i01833832 SEBP3882
2132400 INSTALLATION AR-ENGINE Parts scheme
  For full view, you need register

Parts for your TK711 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 216-9855 Y [1] MOUNTING GP-ENGINE  
2. 216-9856 Y [1] AIR CLEANER GP  
3. 216-9857 Y [1] MUFFLER GP  
  Y   SEPARATE ILLUSTRATION
 

#SEBP38820013
 

224-7846: BELT TENSIONER GP

224-7846 BELT TENSIONER GP
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
i01848643 SEBP3882
2247846 BELT TENSIONER GP Parts scheme
  For full view, you need register

Parts for your TK711 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 190-0643 [1] BELT TENSIONER GP  
2. 189-2449 [1] SUPPORT  
3. 268-8897 [1] SUPPORT AS  
  5V-9221 [1] SPACER (13.8X25X25-MM THK)  
4. 6V-5218 M [2] BOLT (M8X1.25X35-MM)  
5. 6V-5839 [7] WASHER (11X21X2.5-MM THK)  
6. 6V-5842 M [6] BOLT (M10X1.5X40-MM)  
7. 8T-0643 M [1] BOLT (M10X1.5X80-MM)  
8. 9M-1974 [2] WASHER-HARD (8.8X16X2-MM THK)  
   
  2W-9533 FM [4] BOLT (M8X1.25X10-MM)  
  9M-1974 F [4] WASHER-HARD (8.8X16X2-MM THK)  
  F   NOT SHOWN
  M   METRIC PART
 

#SEBP38820014
 

164-6100: CAMSHAFT GP

164-6100 CAMSHAFT GP
S/N 4ZF4479-UP
PART OF 216-4804 ENGINE AR-CORE
i01766520 SEBP3882
1646100 CAMSHAFT GP Parts scheme
  For full view, you need register

Parts for your TK711 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 107-7694 [1] PLATE-THRUST  
2. 216-9782 C [1] CAMSHAFT AS  
2A. 1B-8705 [1] KEY-WOODRUFF  
2B. 205-1322 [1] GEAR-CAMSHAFT (100-TEETH)  
3. 6V-3940 M [2] BOLT (M8X1.25X25-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
 

#SEBP38820015
 

202-3301: COVER GP-CYLINDER BLOCK

202-3301 COVER GP-CYLINDER BLOCK -CRANKCASE
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
i01592478 SEBP3882
2023301 COVER GP-CYLINDER BLOCK Parts scheme
  For full view, you need register

Parts for your TK711 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 213-2411 [1] COVER  
2. 213-2410 [1] GASKET  
3. 240-0041 [1] BREATHER AS (CRANKCASE)  
4. 3E-8005 M [1] BOLT (M8X1.25X160-MM)  
5. 6V-3918 M [2] BOLT (M8X1.25X50-MM)  
6. 6V-3940 M [9] BOLT (M8X1.25X25-MM)  
7. 9F-4446 [1] SEAL-O-RING (CRANKCASE BREATHER)  
8. 9M-1974 [11] WASHER-HARD (8.8X16X2-MM THK)  
9. 5N-4185 [1] WASHER-SPECIAL  
  M   METRIC PART
 

#SEBP38820016
 

133-3089: COVER GP-FLYWHEEL HOUSING

133-3089 COVER GP-FLYWHEEL HOUSING
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
FOR USE WITH RH MOUNTED STARTER
i00500899 SEBP3882
1333089 COVER GP-FLYWHEEL HOUSING Parts scheme
  For full view, you need register

Parts for your TK711 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9Y-6089 [1] GASKET  
2. 9X-6380 [3] BOLT (5/8-11X1.5-IN)  
3. 5P-8247 [3] WASHER-HARD (17X32X3.5-MM THK)  
4. 4N-1114 [1] COVER  
 

#SEBP38820017
 

211-3285: COVER GP-FRONT HOUSING

211-3285 COVER GP-FRONT HOUSING
S/N 4ZF4479-UP
PART OF 216-4802 ENGINE AR
i01593478 SEBP3882
2113285 COVER GP-FRONT HOUSING Parts scheme
  For full view, you need register

Parts for your TK711 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-2099 M [2] STUD (M8X1.25X52.75-MM)  
2. 7C-1445 [1] COVER  
3. 166-1776 [1] COVER AS-FRONT  
3A. 126-1757 [2] WASHER (10.85X19.3X1.27-MM THK)  
3B. 136-0822 [2] STUD  
4. 166-1781 [1] GASKET  
5. 061-9455 [1] SEAL-O-RING  
6. 5C-7261 M [2] NUT (M8X1.25-THD)  
7. 6V-2317 M [10] BOLT (M8X1.25X30-MM)  
8. 8T-0100 M [2] BOLT (M8X1.25X60-MM)  
9. 8T-4224 [2] WASHER-HARD (8.8X16X2-MM THK)  
  M   METRIC PART
 

#SEBP38820018
 

164-6490: COVER GP-VALVE MECHANISM

164-6490 COVER GP-VALVE MECHANISM
S/N 4ZF4479-23503
PROVIDES FRONT OIL FILL ON TOP OF COVER AND THREADED OIL FILLER CAP
PART OF 216-4802 ENGINE AR
i01171980 SEBP3882
1646490 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your TK711 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-4531 [1] CAP AS-ENGINE OIL FILLER  
  7F-8268 [1] SEAL-O-RING  
2. 208-0039 [9] FASTENER AS  
3. 218-0397 [1] COVER AS-BASE  
3A. 217-5701 J SEAL-BULK (23-DM)(VALVE MECHANISM BASE)  
4. 230-6156 [1] COVER GP  
4A. 5P-5678 D SEAL (2.3-M) (VALVE MECHANISM COVER)  
6. 6V-5219 M [11] BOLT (M8X1.25X40-MM)  
7. 9M-1974 [11] WASHER-HARD (8.8X16X2-MM THK)  
  D   ORDER BY THE METER
  J   ORDER BY THE DECIMETER
  M   METRIC PART
 

#SEBP38820019
 

164-6490: COVER GP-VALVE MECHANISM

164-6490 COVER GP-VALVE MECHANISM
S/N 4ZF23504-25257
PROVIDES FRONT OIL FILL ON TOP OF COVER AND THREADED OIL FILLER CAP
PART OF 216-4802 ENGINE AR
i02500772 SEBP3882
1646490 COVER GP-VALVE MECHANISM Parts scheme
  For full view, you need register

Parts for your TK711 TRACK FELLER BUNCHER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 227-4531 [1] CAP AS-ENGINE OIL FILLER  
  7F-8268 [1] SEAL-O-RING  
2. 244-4500 C [9] SPRING  
3. 248-5719 C [1] COVER GP-VALVE MECHANISM  
3A. 5P-5678 D SEAL (2.3-M)  
4. 271-2418 C [1] BASE GP-VALVE COVER  
4A. 268-3490 [1] SEAL-VALVE COVER  
5. 6V-5219 M [11] BOLT (M8X1.25X40-MM)  
6. 8T-0100 CM [9] BOLT (M8X1.25X60-MM)  
7. 9M-1974 [11] WASHER-HARD (8.8X16X2-MM THK)  
8. 9N-0869 C [9] WASHER-HARD (8.8X25.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  D   ORDER BY THE METER
  M   METRIC PART
 

Information:

Truck Engine News
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Truck Engine News {0374, 1000, 7000}
Engine News
A Long Term Storage and Recovery Procedure Is Now Available for Certain Commercial Engines {1000}
2010/02/03
Improved Registration Process for Retrofit Products {1000, 7000}
2011/04/15
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed in Engine News {0374, 1000, 7000}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Procedure for Cleaning an Engine Lubrication System when Contaminated with Engine Coolant Containing Antifreeze {1000, 1348, 1395}
Special Instruction
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Caterpillar DPF Installation and Operation Guide for Diesel Engines - California Only {1000, 1091}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Generation 3 DPFdm Diagnostic Module Installation Manual - California Only {1000, 1091, 7490}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
Storage Procedure for Caterpillar Products {0355, 1000, 7000}
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
The Long Term Storage and Recovery of Certain Commercial Engines{0355, 1000}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Differences in Appearance of Cat <SUP>&reg;</SUP> Reman Parts when Compared to New Parts {1000, 1250}
Differences in Appearance of Cat ® Reman Parts when Compared to New Parts {1000, 1250}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Introduction to Visualization Service Procedure (VSP) {0374, 1000, 7000}
Technical Information Bulletin
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
A Recommendation for Initial Parts Stock Quantities Will Now Be Included in Service Letters{1000, 7000, 7751, 7752}
High Idle Cannot be Obtained on Timberking Buncher{1000, 1902}
High Idle Cannot be Obtained on Timberking Buncher{1000, 1902}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
Piston Ring Gap Alignment Influence on High Blowby and Oil Consumption on All Engines {1000, 1215}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
368-9910 Multi-Tool Group with the 368-9911 Burn Rate Group Accuracy Issue{0599, 0701, 0702, 0706, 1000, 7610, 7620}
Specifications
Engine Design
C-9 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
Using the 1U-8860 Large Engine Blowby Pickup Group and the 8T-2700 Blowby/Airflow Indicator{0781, 0785, 1000}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
Systems Operation
General Information
C-9 Engines for Caterpillar Built Machines
Reuse And Salvage Guidelines
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Reuse and Testing of Fuel Injection Pump Housing {0374, 1000, 1250, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
HVOF Identification and Polishing (Superfinishing){0674, 0679, 1000, 7000, 7562}
Cleaning Components with Carbon Dioxide (CO<SUB>2</SUB>) {0680, 1000, 7000}
Cleaning Components with Carbon Dioxide (CO2) {0680, 1000, 7000}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Guideline for Proper Gasket Handling and Installation {0599, 0648, 0681, 1000, 7555}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Reuse and Salvage Guidelines Subscriptions {0374, 0599, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Scrap Barrel Analysis {0374, 0599, 0700, 0701, 0738, 1000, 7000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Fundamentals of Plasma Transferred Wire Arc (PTWA) Spray for Reconditioning Components {0374, 0599, 0679, 1000}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Contamination Control of Rebuilt Engines by Using a Particle Counting Process Patent Pending{1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Filtration Procedure for Rebuilt Engines {0680, 0768, 1000, 1300}
Applied Failure Analysis
Failure Analysis Report - AFA Good Report {0374, 1000}
Failure Analysis Report - AFA Good Report {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Reference Guide for a Proper Failure Analysis by CAT Dealer {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Product Evaluation Report - AFA Bad Report {0374, 1000}
Information Release Memo
CAT REMAN ANNOUNCES SHORT BLOCK OPTIONS FOR CAT� C9, C11, AND C13 MACHINE APPLICATIONS
CAT REMAN ANNOUNCES SHORT BLOCK OPTIONS FOR CAT� C9, C11, AND C13 MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL C9 ENGINE OPTIONS FOR CAT� MACHINE APPLICATIONS
CAT REMAN ANNOUNCES ADDITIONAL C9 ENGINE OPTIONS FOR CAT� MACHINE APPLICATIONS
LOW VOLUME NEW ENGINE STRATEGY RATIONALIZATION
LOW VOLUME NEW ENGINE STRATEGY RATIONALIZATION
ENGINE OVERHAUL KITS FOR C-9 MACHINE ENGINES
ENGINE OVERHAUL KITS FOR C-9 MACHINE ENGINES
CAT REMAN ANNOUNCES ADDITIONAL 3176, C9, C11, C13 AND C15 ENGINE OPTIONS FOR CAT&reg; MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL 3176, C9, C11, C13 AND C15 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL 3116, 3126, C-9 AND 3176 ENGINE OPTIONS FOR CAT&reg; MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES ADDITIONAL 3116, 3126, C-9 AND 3176 ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS (UPDATED COVERAGE CHART)
CAT REMAN ANNOUNCES C9 HIGH EFFICIENCY PUMP ENGINE OPTIONS FOR CAT&reg; MACHINE APPLICATIONS
CAT REMAN ANNOUNCES C9 HIGH EFFICIENCY PUMP ENGINE OPTIONS FOR CAT® MACHINE APPLICATIONS
Troubleshooting
Low Engine Oil Pressure
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Engine Stalls at Low RPM
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Engine Misfires, Runs Rough or Is Unstable
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
E190 Engine Overspeed Warning
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Engine Vibration
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Excessive Fuel Consumption
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Excessive Black Smoke
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Engine Cranks but Will Not Start
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Excessive White Smoke
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Engine Will Not Crank
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Low Power/Poor or No Response to Throttle
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Poor Acceleration or Response
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers
Disassembly and Assembly
Engine - Remove
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Engine Supplement
Engine - Install
TK711 Track Feller Buncher, TK721 Track Feller Buncher, TK722 Track Feller Buncher and TK732 Track Feller Buncher Engine Supplement
Service Magazine
Caterpillar's Position On The Use Of Biodiesel Fuel In Caterpillar Engines {1000}
2012/09/17
Responsibilities for Emission Certified Engines {1000}
2005/10/03
Proper Long Term Storage of Caterpillar Products {0355, 1000, 7000}
2009/04/27
Changes To Caterpillar Incident Reporting Field Use Form And DSN Incident Report Entry Screens {1000, 7000}
2013/04/17
Redesigned Fluid Sampling Valves Are Now Available for All Cat Products {7542}
2011/02/11
Improved Registration Process for Retrofit Products {1000, 3000, 7000, 7570}
2011/02/17
Updated Engine Diagnostic Publications for Certain C7 and C9 ACERT Powered Machines Is Available {1000, 1250, 1450}
2011/09/20
TA2 (Technical Analysis) Inspections are Now Available on SIS {0372, 1000, 7000, 753T, 7565}
2013/01/10
Cat<SUP>&reg;</SUP> Reman Announces the Availability of Additional Engine Components for Certain Machine Applications {1000, 1052, 1053, 1210, 1251, 1252, 1254, 1265, 1290, 1405, 1713, 1901, 7490, 7610, 7620}
2015/06/25
Service Magazines, Engine News, and Truck Engine News Articles Moved from Dealer.cat.com to SISweb {0374, 1000, 7000}
2015/09/22
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
A New Visualization Service Procedure (VSP) is Now Used for Certain Publications {0374, 1000, 7000}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Military Electronic Technician (Military ET) Is Now Available For Military Personnel {0374, 0376, 0599, 1000, 7000, 7610, 7620}
Process to Print Collage Schematics {0374, 1000, 7000}
Process to Print Collage Schematics {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
Changes to the Way Serial Numbers are Displayed on Service Magazines {0374, 1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}
A New Process Is Available to Request Service Animations for Certain Service Information Procedures {1000, 7000}

Caterpillar Parts SIS Catalog TK711 :

CONVERSION AR-MACHINE
242-5335 CONVERSION AR-MACHINE
242-5335 CONVERSION AR-MACHINE
262-0998 COMMON AR
213-2394 COMMON AR
COLD WEATHER AR
319-6600 COLD WEATHER AR
COLD WEATHER AR
319-6600 COLD WEATHER AR
261-1086 CHASSIS AR
CHASSIS AR
213-2398 CHASSIS AR
216-4804 ENGINE AR-CORE
INSTALLATION AR-ENGINE
213-2400 INSTALLATION AR-ENGINE
BELT TENSIONER GP
224-7846 BELT TENSIONER GP
CAMSHAFT GP
164-6100 CAMSHAFT GP
COVER GP-CYLINDER BLOCK
202-3301 COVER GP-CYLINDER BLOCK
COVER GP-FLYWHEEL HOUSING
133-3089 COVER GP-FLYWHEEL HOUSING
COVER GP-FRONT HOUSING
211-3285 COVER GP-FRONT HOUSING
COVER GP-VALVE MECHANISM
164-6490 COVER GP-VALVE MECHANISM

Truck sale:

CATERPILLAR TK711 2006
$85,829 USD 
CATERPILLAR TK711 2006
- FOREST MACHINE
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
2006 CAT TK711
USD $86,570 
2006 CAT TK711

TOROMONT CAT - Main
TORONTO, Ontario, Canada
2004 CAT TK711
USD $35,000 
2004 CAT TK711

MILTON CAT
SYRACUSE, New York
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.