AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

191-6587 SENSOR GP-TEMPERATURE 2 PIN PASSIVE PART OF 204-0320 SENSOR GP-TEMPERATURE Type 1 3126B GEN SET ENGINE


ELECTRICAL AND STARTING SYSTEM
SENSOR GP
STARTING AID GP
STARTING MOTOR GP

GEN SET ENGINE 3126B GEN SET ENGINE BDZ
 3126B Gen Set Engine BDZ00001-UP SEBP3903 3126B BDZ   (1999)

ELECTRICAL AND STARTING SYSTEM

SENSOR GP
SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED
SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
SENSOR GP-TEMPERATURE
191-6587 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
191-6587 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
204-0320 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
 

#SEBP39030150
 

191-6587: SENSOR GP-TEMPERATURE

191-6587 SENSOR GP-TEMPERATURE
2 PIN PASSIVE
PART OF 204-0320 SENSOR GP-TEMPERATURE
Type 1
i01465225 SEBP3903
1916587 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 3126B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 153-5043 J SLEEVE (2-DM)  
2. 155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 180-9340 [2] SOCKET-CONNECTOR (14-GA TO 18-GA)  
  J   ORDER BY THE DECIMETER
 

#SEBP39030151
 

191-6587: SENSOR GP-TEMPERATURE

191-6587 SENSOR GP-TEMPERATURE
2 PIN PASSIVE
PART OF 204-0320 SENSOR GP-TEMPERATURE
Type 2
i07532644 SEBP3903
1916587 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 3126B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
 

#SEBP39030152
 

204-0320: SENSOR GP-TEMPERATURE

204-0320 SENSOR GP-TEMPERATURE
PART OF 202-2371 SENSOR GP-ENGINE
i02060801 SEBP3903
2040320 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 3126B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 191-6587 Y [1] SENSOR GP-TEMPERATURE (2-PIN)  
2. 214-7568 [1] SEAL-O-RING  
  Y   SEPARATE ILLUSTRATION
 

#SEBP39030153
 

274-7395: SENSOR GP-TEMPERATURE

274-7395 SENSOR GP-TEMPERATURE
PART OF 202-2371 SENSOR GP-ENGINE
i02379171 SEBP3903
2747395 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 3126B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)  
  137-6645 [1] PAD-CONNECTOR  
2. 238-5080 [1] SEAL-O-RING  
 

#SEBP39030154
 

274-7396: SENSOR GP-TEMPERATURE

274-7396 SENSOR GP-TEMPERATURE
PART OF 202-2371 SENSOR GP-ENGINE
i02379019 SEBP3903
2747396 SENSOR GP-TEMPERATURE Parts scheme
  For full view, you need register

Parts for your 3126B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-4297 [1] SENSOR AS-TEMPERATURE (2-PIN)  
  137-6645 [1] PAD-CONNECTOR  
2. 6V-6609 [1] SEAL-O-RING  
 

#SEBP39030155
 

118-7284: STARTING AID GP

118-7284 STARTING AID GP -AIR INLET HEATER
24-VOLT
i00486897 SEBP3903
1187284 STARTING AID GP Parts scheme
  For full view, you need register

Parts for your 3126B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1U-8846 B SEALANT-GASKET  
2. 159-3537 [1] HEATER AS-AIR INLET (22-VOLT, 1892-WATT)(STARTING AID)  
3. 5C-2890 M [2] NUT (M6X1-THD)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39030156
 

199-3780: STARTING AID GP

199-3780 STARTING AID GP -AIR INLET HEATER
S/N BDZ1-180
24-VOLT. PROVIDES RELAY SWITCH
FOR USE WITH AIR INLET HEATER/SOLENOID, MID MOUNT FUEL FILTER BASE
i01459632 SEBP3903
1993780 STARTING AID GP Parts scheme
  For full view, you need register

Parts for your 3126B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7S-6369 [1] WASHER (0.344X0.75X0.188-IN THK)  
2. 003-9835 [1] PROTECTOR  
3. 147-0286 [1] WIRE AS  
4. 195-1306 [1] STRAP-GROUNDING  
5. 175-2324 Y [1] SWITCH GP-MAGNETIC (24-VOLT)(AIR INLET HEATER)  
6. 4P-8134 [1] CLIP (LADDER)  
7. 6V-5218 M [1] BOLT (M8X1.25X35-MM)  
8. 8T-4970 M [2] BOLT (M6X1X14-MM)  
9. 9M-1974 [1] WASHER-HARD (8.8X16X2-MM THK)  
10. 9X-8256 [2] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39030157
 

128-5626: STARTING MOTOR GP-ELECTRIC

128-5626 STARTING MOTOR GP-ELECTRIC -COLD WEATHER
i01758488 SEBP3903
1285626 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3126B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3K-3257 [1] GASKET  
2. 8Y-9603 [1] CABLE AS-STARTING MOTOR  
  1S-7251 [1] TERMINAL-CABLE (00-GA, 1/2-IN SCREW)  
  1S-7252 [1] TERMINAL-CABLE (00-GA, 3/8-IN SCREW)  
  5P-0747 E CABLE (00-GA, BLACK)(28-CM)  
3. 118-9573 M [3] BOLT-12 POINT HEAD (M10X1.5X35-MM)  
4. 207-1551 CY [1] STARTING MOTOR GP-ELECTRIC  
5. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
6. 8T-4191 M [1] BOLT (M10X1.5X16-MM)  
  C   CHANGE FROM PREVIOUS TYPE
  E   ORDER BY THE CENTIMETER
  M   METRIC PART
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP39030158
 

207-1551: STARTING MOTOR GP-ELECTRIC

207-1551 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 128-5626 STARTING MOTOR GP-ELECTRIC
Type 1
i01684538 SEBP3903
2071551 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3126B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2247 [1] PLUG-PIPE (1/8-27-THD)  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 7T-3271 [1] CONNECTOR  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3F-0379 [8] SCREW-POLE SHOE (3/8-24-THD)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 105-9702 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 036-9823 [5] BOLT (1/4-28X1-IN)  
22. 6N-3827 [1] DRIVE AS-MOTOR  
23. 9X-9510 [1] HOUSING AS  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 193-8570 [1] SOLENOID AS-STARTING MOTOR (24-VOLT)  
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER AS, SHAFT AS, GASKET, SEALS, RINGS, STOP & NUT)
31. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SEAL, SCREWS & SPRINGS)
32. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
33. 9F-2547 [1] WICK  
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, WASHERS, SPACER, NUT, & SCREW ASSEMBLIES)
 

#SEBP39030159
 

207-1551: STARTING MOTOR GP-ELECTRIC

207-1551 STARTING MOTOR GP-ELECTRIC
24-VOLT
PART OF 128-5626 STARTING MOTOR GP-ELECTRIC
Type 2
i04840710 SEBP3903
2071551 STARTING MOTOR GP-ELECTRIC Parts scheme
  For full view, you need register

Parts for your 3126B GEN SET ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9F-2247 [1] PLUG-PIPE (1/8-27-THD)  
2. 7T-3279 [1] HOUSING AS  
3. 8T-8566 [1] TERMINAL AS  
4. 6V-8188 [4] NUT (1/2-13-THD)  
5. 7X-0562 [4] WASHER-HARD (13.5X19X0.8-MM THK)  
6. 3T-3422 [1] WIRE AS  
7. 7T-3278 [1] HOLDER AS-BRUSH  
8. 7T-3277 [1] COIL AS-FIELD  
9. 7T-3454 [1] INSULATOR  
10. 9F-2547 [1] WICK  
11. 7T-3451 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATOR TERMINALS & GROMMET)
12. 8T-8569 [1] INSULATOR-TERMINAL  
13. 5S-7349 [4] BOLT (1/4-20X0.5-IN)  
14. 8T-4205 [4] WASHER-HARD (7.2X14.5X2-MM THK)  
15. 8H-1141 [4] SHOE-POLE  
16. 3R-8797 C [8] SCREW & WASHER AS (3/8-24X0.72-IN)  
17. 7T-3276 [1] ARMATURE AS (24-VOLT)  
18. 105-9702 [1] HOUSING AS  
19. 4M-1831 [1] PLUG-LEVER HOUSING  
20. 7L-2894 [1] GASKET  
21. 0S-1597 C [5] BOLT (1/4-28X1-IN)  
22. 6N-3827 [1] DRIVE AS-MOTOR  
23. 9X-9510 [1] HOUSING AS  
24. 7X-3373 [6] BOLT (5/16-18X0.88-IN)  
25. 548-9596 C [1] KIT-SOLENOID (24-VOLT)  
    (INCLUDES NUTS, BOLTS, CONNECTORS, &M INSTRUCTION SHEET)
26. 6V-8378 [3] NUT (10-32-THD)  
27. 8F-1434 [2] LOCKWASHER  
28. 8T-0328 [3] WASHER-HARD (5.5X10X1-MM THK)  
29. 9X-4824 [1] COVER-STARTING MOTOR  
30. 7T-3268 [1] KIT-LEVER (STARTING MOTOR)  
    (INCLUDES LEVER AS, SHAFT AS, GASKET, SEALS, RINGS, STOP & NUT)
31. 8C-3655 [1] KIT-BRUSH (STARTING MOTOR)  
    (INCLUDES BRUSHES, SEAL, SCREWS, SCREW ASSEMBLIES & SPRINGS)
32. 8T-9884 [1] KIT-INSULATOR (STARTING MOTOR)  
    (INCLUDES INSULATORS & BUSHING)
   
    AVAILABLE REPAIR KIT(S):
  7T-3267 [1] KIT-BUSHING (STARTING MOTOR)  
    (INCLUDES BUSHINGS, WICKS, CUPS, SEALS, GASKET, WASHERS, SPACER, NUT, & SCREW ASSEMBLIES)
  C   CHANGE FROM PREVIOUS TYPE
 

Information:

Engine News
A New Speed Sensor is Available {1907}
2004/03/01
Coolant Sensor Installation Service Notes {5574}
2008/07/07
Special Instruction
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>&reg;</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>&reg;</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Systems Operation
Sensors
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
Testing and Adjusting
Speed Sensor (Engine) - Adjust
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
Pulse Width Modulated (PWM) Sensor - Test
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
Troubleshooting
CID 0261 FMI 13 Engine Timing Calibration required
3126B Generator Set Engine
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Generator Set Engine
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Generator Set Engine
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Generator Set Engine
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Generator Set Engine
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Generator Set Engine
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Generator Set Engine
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Generator Set Engine
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Generator Set Engine
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Generator Set Engine
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Generator Set Engine
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Generator Set Engine
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Generator Set Engine
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Generator Set Engine
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Generator Set Engine
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Generator Set Engine
Engine Speed/Timing Sensor Circuit - Test
3126B Generator Set Engine
Engine Speed/Timing Sensor - Calibrate
3126B Generator Set Engine
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Generator Set Engine
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Generator Set Engine
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Generator Set Engine
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Generator Set Engine
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Generator Set Engine
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Generator Set Engine
Injection Actuation Pressure Sensor - Test
3126B Generator Set Engine
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Generator Set Engine
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Generator Set Engine
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Generator Set Engine
Sensors and Electrical Connectors
3126B Generator Set Engine
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Generator Set Engine
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Generator Set Engine
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Generator Set Engine
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Generator Set Engine
Analog Sensor Supply Circuit - Test
3126B Generator Set Engine
Engine Pressure Sensor Open or Short Circuit - Test
3126B Generator Set Engine
Engine Temperature Sensor Open or Short Circuit - Test
3126B Generator Set Engine
Speed Control - Test
3126B Generator Set Engine
GSC CID 0100 - FMI 02
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0100 - FMI 03
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0100 - FMI 04
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0110 - FMI 03
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0110 - FMI 04
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0111 - FMI 03
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0175 - FMI 02
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0175 - FMI 03
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0175 - FMI 04
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0190 - FMI 02
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0190 - FMI 03
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0269 - FMI 03
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0269 - FMI 04
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus
GSC CID 0110 - FMI 02 (for EUI Engines)
100-200 kW Tactical Quiet Generators (TQG) EMCP2 Plus

Caterpillar Parts SIS Catalog 3126B :

SENSOR GP-SPEED
318-1181 SENSOR GP-SPEED
SENSOR GP-SPEED
236-6221 SENSOR GP-SPEED
SENSOR GP-SPEED
190-6186 SENSOR GP-SPEED
SENSOR GP-PRESSURE
247-0302 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
239-2396 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
239-2395 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
236-6220 SENSOR GP-PRESSURE
SENSOR GP-PRESSURE
224-4536 SENSOR GP-PRESSURE
SENSOR GP-TEMPERATURE
191-6587 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
204-0320 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7395 SENSOR GP-TEMPERATURE
SENSOR GP-TEMPERATURE
274-7396 SENSOR GP-TEMPERATURE
STARTING AID GP
118-7284 STARTING AID GP
STARTING AID GP
199-3780 STARTING AID GP
STARTING MOTOR GP-ELECTRIC
128-5626 STARTING MOTOR GP-ELECTRIC
STARTING MOTOR GP-ELECTRIC
207-1551 STARTING MOTOR GP-ELECTRIC

Truck sale:

Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.