OPERATOR STATION
ALARM GPSERVICE EQUIPMENT AND SUPPLIES
CHARTS & FILMSGASKET & SEAL KITS
OPERATOR STATION
ALARM GP
#SEBP39030170
130-3324: MODULE GP-ALARM
For full view, you need register
Parts for your 3126B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 2W-4480 | [2] | BOOT-SWITCH | |
| 2. | 9W-1464 | [4] | SCREW (1/4-20X1-IN) | |
| 3. | 3N-5762 | [1] | HORN | |
| 4. | 5P-3059 | [8] | TERMINAL-FORK (18-GA TO 22-GA, NO. 6 SCREW) | |
| 5. | 174-4290 E | WIRE (18-GA, WHITE)(255-CM) | ||
| 6. | 9S-8002 | [1] | PLUG (7/16-20-THD) | |
| 7. | 3J-7354 | [1] | SEAL-O-RING | |
| 8. | 9W-0073 | [1] | SWITCH AS-PUSH BUTTON (LAMP TEST) | |
| 8A. | 9W-0073 | [1] | SWITCH AS-PUSH BUTTON (ALARM SILENCE) | |
| 9. | 8C-6123 | [2] | NUT (1/4-40-THD) | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP39030171
6L-4502: CHART-PLATE & FILM
6L-4502 CHART-PLATE & FILM
For full view, you need register
Parts for your 3126B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4P-8681 | [1] | FILM-IDENTIFICATION (ENGINE OIL FILTER) | ||
| INSTALL ON SPIN-ON OIL FILTER. ONLY IF TOP COATED | ||||
| 4P-6379 | [1] | FILM-IDENTIFICATION (FUEL FILTER) | ||
| INSTALL ON SPIN-ON FUEL FILTER. ONLY IF TOP COATED | ||||
| [1] | PLATE-SERIAL NUMBER (ENGINE) | |||
| ** REFLATTEN AFTER STAMPING. INSTALL WITH LOCTITE COMPANY DEPEND ADHESIVE ON LOWER RH SIDE OF CYL BLOCK. | ||||
| [1] | FILM (LABEL-AIAG SHIPPING) | |||
| ATTACH TO GOVERNOR & COMPRESSOR LINES ON FRONT OF ENGINE. | ||||
| 7E-8050 | [1] | FILM GP (EPA CERTIFICATION) | ||
| INSTALL ON TOP FLAT SURFACE OF VALVE COVER ADJACENT TO BE READABLE FROM LH SIDE OF ENGINE. | ||||
| [1] | FILM (INFORMATION) | |||
| INSTALL ON LH SIDE TOWARDS REAR OF ENGINE BELOW VALVE COVER ON TOP PORTION OF ROUNDED SURFACE. | ||||
| 7W-9808 | [1] | FILM-INFORMATION (EPA) | ||
| INSTALL ADJACENT TO RH SIDE OF EPA EMISSION FILM READABLE FROM LH SIDE OF ENGINE. | ||||
| 8L-8413 | [1] | STRAP-CABLE (WHITE) | ||
| INSTALL PRESTART TAG. | ||||
| 9M-0016 | [1] | FILM-PATENT (ENGINE) | ||
| INSTALL 1 OF 2 ON THE FRONT COVER, & INSTALL 2 OF 2 ON THE SIDE OF THE OIL PAN. | ||||
| 115-5852 | [1] | PLATE & FILM GP (ENGINE INFORMATION) | ||
| INSTALL ON TOP OF VALVE COVER TOWARDS REAR ENGINE READABLE FROM LH SIDE OF ENGINE. INSTALL LAMINANT OVER SILVER FILMS. | ||||
| 118-6305 | [1] | FILM-WARNING (HIGH VOLTAGE, HIGH PRESSURE) | ||
| INSTALL ON TOP FLAT SURFACE OF VALVE COVER ADJACENT TO THE RH SIDE WARRANTY FILM, READABLE FROM LH SIDE OF ENGINE. | ||||
| 124-5354 | [1] | FILM-INFORMATION (TRADEMARK) | ||
| INSTALL ON TOP FLAT SURFACE OF VALVE COVER TOWARD REAR OF ENGINE READABLE FROM LH SIDE OF ENGINE. | ||||
| [1] | FILM-FUEL FILTER | |||
| INSTALL ON SPIN-ON FUEL FILTER. | ||||
| 136-9066 | [1] | FILM-INFORMATION (ENGINE OIL) | ||
| INSTALL ON TOP FLAT SURFACE OF VALVE COVER READABLE FROM LH SIDE OF ENGINE. | ||||
| 156-8041 | [1] | FILM-INFORMATION (DO NOT REMOVE) | ||
| INSTALL ON OIL PUMP RESERVOIR READABLE FROM LH SIDE OF ENGINE. | ||||
| 3N-3469 | [1] | TAG-INSTRUCTION (ENGINE PRESTART) | ||
| INSTALL ON RH OR LH SIDE ENGINE IN A VISIBLE LOCATION. DO NOT INSTALL ON FRONT OR REAR OF ENGINE OR COMPONENT. | ||||
#SEBP39030172
455-9553: KIT-GASKET
For full view, you need register
Parts for your 3126B GEN SET ENGINE:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1J-9671 | [2] | SEAL-O-RING | ||
| 2M-9780 | [1] | SEAL-O-RING | ||
| 3E-8017 M | [4] | LOCKNUT (M10X1.5-THD) | ||
| 3J-1907 | [7] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3K-0360 | [1] | SEAL-O-RING | ||
| 5P-7814 | [1] | SEAL-O-RING | ||
| 6V-5048 | [8] | SEAL-O-RING | ||
| 6V-6609 | [1] | SEAL-O-RING | ||
| 6V-8397 | [2] | SEAL-O-RING | ||
| 7C-7431 | [1] | GASKET | ||
| 7J-0204 | [2] | SEAL-O-RING | ||
| 8H-2046 | [1] | SEAL-O-RING | ||
| 9X-7712 | [1] | SEAL-O-RING | ||
| 126-5466 | [1] | GASKET | ||
| 133-4995 | [1] | GASKET AS-CYLINDER HEAD | ||
| 282-2468 | [1] | GASKET-CYLINDER HEAD | ||
| 282-2474 | [1] | GASKET-CYLINDER HEAD | ||
| 197-8419 | [1] | GASKET (TURBOCHARGER) | ||
| 214-7566 | [7] | SEAL-O-RING | ||
| 214-7568 | [8] | SEAL-O-RING | ||
| 228-7089 | [2] | SEAL-O-RING | ||
| 238-5084 | [2] | SEAL-O-RING | ||
| 272-1956 | [6] | GASKET | ||
| 418-6781 M | [4] | STUD-TAPERLOCK (M10X1.5X40-MM) | ||
| M | METRIC PART | |||
Information:
OPERATOR STATION
ALARM GP
Systems Operation
Testing and Adjusting
Troubleshooting
