POWER TRAIN
VALVE GP-MODULATINGVALVE GP-RELIEF
VALVE GP-SOLENOID
CONTROL GP-TRANSMISSION HYD
AXLE GP
POWER TRAIN
VALVE GP-MODULATING
#SEBP39040690
385-4432: VALVE GP-MODULATING
385-4432 VALVE GP-MODULATING
S/N MAH1-UP; DRK1-99999
24-VOLT
PART OF 244-3114 VALVE GP-MODULATING
S/N MAH1-UP; DRK1-99999
24-VOLT
PART OF 244-3114 VALVE GP-MODULATING
For full view, you need register
Parts for your 834H WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 2. | 444-7826 | [1] | COIL AS (24-VOLT) | |
| 3. | 214-7568 | [1] | SEAL-O-RING | |
| 4. | 164-2108 | [1] | WASHER (13.03X25.4X2.38-MM THK) | |
| 5. | 218-2373 | [1] | NUT (1/2-28-THD) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP39040691
425-4565: VALVE GP-MODULATING
425-4565 VALVE GP-MODULATING
S/N MAH1-UP; DRK1-99999
24-VOLT
PART OF 244-3114 VALVE GP-MODULATING
S/N MAH1-UP; DRK1-99999
24-VOLT
PART OF 244-3114 VALVE GP-MODULATING
For full view, you need register
#SEBP39040692
425-6734: VALVE GP-MODULATING
425-6734 VALVE GP-MODULATING
S/N MAH1-UP; DRK1-99999
24-VOLT
PART OF 244-3114 VALVE GP-MODULATING
S/N MAH1-UP; DRK1-99999
24-VOLT
PART OF 244-3114 VALVE GP-MODULATING
For full view, you need register
Parts for your 834H WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 2. | 323-9531 | [1] | COIL AS (24-VOLT) | |
| 3. | 214-7568 | [1] | SEAL-O-RING | |
| 4. | 164-2108 | [1] | WASHER (13.03X25.4X2.38-MM THK) | |
| 5. | 218-2373 | [1] | NUT (1/2-28-THD) | |
| PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY | ||||
#SEBP39040693
468-3266: VALVE GP-MODULATING
468-3266 VALVE GP-MODULATING
S/N BTX1268-UP
TORQUE CONVERTER
FIELD REPLACEMENT FOR @@@@@311-6364@@@@@
S/N BTX1268-UP
TORQUE CONVERTER
FIELD REPLACEMENT FOR @@@@@311-6364@@@@@
For full view, you need register
Parts for your 834H WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| 2. | 187-2710 | [1] | WASHER | |
| 3. | 218-2373 | [1] | NUT (1/2-28-THD) | |
| 4. | 214-7568 | [1] | SEAL-O-RING | |
| 5. | 322-5036 | [1] | COIL AS | |
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 3E-3371 | [1] | WEDGE-RECEPTACLE LOCK (3-PIN) | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 8T-8737 | [1] | PLUG-SEAL | ||
#SEBP39040694
104-5013: VALVE GP-RELIEF
104-5013 VALVE GP-RELIEF -TORQUE CONVERTER OUTLET
S/N BTX1-UP
PART OF 226-1951, 345-3970 LINES GP-POWER TRAIN OIL
S/N BTX1-UP
PART OF 226-1951, 345-3970 LINES GP-POWER TRAIN OIL
For full view, you need register
Parts for your 834H WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | [1] | BODY-RELIEF VALVE | ||
| 2. | 4M-8239 | [2] | COVER | |
| 3. | 0S-1594 | [4] | BOLT (3/8-16X1-IN) | |
| 4. | 5M-2894 | [4] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 5. | 8M-8627 | [1] | SPRING | |
| 6. | 5M-9622 B | [2] | SHIM (1.6-MM THK) | |
| 5M-9623 B | [3] | SHIM (0.9-MM THK) | ||
| 5M-9624 B | [1] | SHIM (0.25-MM THK) | ||
| 7. | 8M-4986 | [2] | SEAL-O-RING | |
| 8. | 2P-4538 | [1] | SPOOL AS-RELIEF | |
| 9. | 9M-4313 | [1] | POPPET | |
| 10. | 5M-9548 | [1] | SPRING | |
| 11. | 1L-3162 | [1] | RING-RETAINING | |
| 12. | 8M-2537 | [1] | RETAINER | |
| 13. | 6V-0852 | [1] | CAP-DUST | |
| 14. | 3J-1907 | [1] | SEAL-O-RING | |
| 15. | 6V-3965 | [1] | FITTING (QUICK DISCONNECT) | |
| B | USE AS REQUIRED | |||
#SEBP39040695
233-1704: VALVE GP-RELIEF
233-1704 VALVE GP-RELIEF -TRANSMISSION HYDRAULIC CONTROL
S/N DRK1-1167
PART OF 230-6318 CONTROL GP-TRANSMISSION HYD
S/N DRK1-1167
PART OF 230-6318 CONTROL GP-TRANSMISSION HYD
For full view, you need register
Parts for your 834H WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4M-5905 | [1] | SCREW-ADJUSTMENT (5/16-18X1-IN) | |
| 2. | 5B-3180 | [1] | NUT (5/16-18-THD) | |
| 4. | 9W-5568 | [1] | SLUG | |
| 5. | 106-9212 | [1] | SPRING | |
| 6. | 109-3969 | [1] | STOP | |
| 7. | 133-6567 | [1] | SPOOL AS-RELIEF | |
| 3D-8317 | [1] | RING-RETAINING | ||
| 4B-9880 | [1] | BALL | ||
| 4M-2381 | [1] | SPRING | ||
| 8M-1013 | [1] | RETAINER | ||
| 8. | 148-1928 | [1] | VALVE-RELIEF (TORQUE CONVERTER INLET) | |
| 9. | 229-7316 | [1] | MANIFOLD | |
| 10. | 231-4781 | [1] | PLATE | |
| 12. | 6V-2317 M | [27] | BOLT (M8X1.25X30-MM) | |
| 13. | 6Y-4638 | [1] | PLUG-HEX SOCKET (1-5/16-12-THD) | |
| 14. | 7M-8485 | [1] | SEAL-O-RING | |
| 15. | 9M-1974 | [28] | WASHER-HARD (8.8X16X2-MM THK) | |
| 16. | 9X-4609 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
#SEBP39040696
149-2610: VALVE GP-SOLENOID
149-2610 VALVE GP-SOLENOID
S/N BTX1-UP
24-VOLT
PART OF 225-3034 LINES GP-AXLE OIL COOLER, 255-0930 LINES GP-AXLE OIL COOLER FAN
FIELD REPLACEMENT ORDER @@@@@279-6528@@@@@
S/N BTX1-UP
24-VOLT
PART OF 225-3034 LINES GP-AXLE OIL COOLER, 255-0930 LINES GP-AXLE OIL COOLER FAN
FIELD REPLACEMENT ORDER @@@@@279-6528@@@@@
For full view, you need register
Parts for your 834H WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3G-8175 | [1] | KIT-SEAL (SOLENOID VALVE) | |
| (INCLUDES O-RINGS & BACK-UP RING) | ||||
| 2. | 218-9894 | [1] | COIL AS (24-VOLT) | |
| 1S-9593 | [2] | STRAP-CABLE | ||
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 20-GA) | ||
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3. | 355-1470 | [1] | CARTRIDGE AS | |
#SEBP39040697
295-1145: VALVE GP-TRANSMISSION CONTROL
295-1145 VALVE GP-TRANSMISSION CONTROL
S/N MAH1-UP; DRK900-99999
PART OF 230-6318, 347-0184 CONTROL GP-TRANSMISSION HYD
S/N MAH1-UP; DRK900-99999
PART OF 230-6318, 347-0184 CONTROL GP-TRANSMISSION HYD
For full view, you need register
Parts for your 834H WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 4M-5905 | [1] | SCREW-ADJUSTMENT (5/16-18X1-IN) | |
| 2. | 5B-3180 | [1] | NUT (5/16-18-THD) | |
| 3. | 8E-9571 | [27] | WASHER-HARD (8.8X16X7-MM THK) | |
| 4. | 9W-5568 | [1] | SLUG | |
| 5. | 106-9212 | [1] | SPRING | |
| 6. | 109-3969 | [1] | STOP | |
| 7. | 133-6567 | [1] | SPOOL AS-RELIEF | |
| 3D-8317 | [1] | RING-RETAINING | ||
| 4B-9880 | [1] | BALL | ||
| 4M-2381 | [1] | SPRING | ||
| 8M-1013 | [1] | RETAINER | ||
| 8. | 148-1928 | [1] | VALVE-RELIEF (TORQUE CONVERTER INLET) | |
| 9. | 349-3904 | [1] | PLATE | |
| 10. | 295-1146 | [1] | MANIFOLD | |
| 12. | 3F-4479 | [1] | PIN-SPRING | |
| 13. | 6V-2317 M | [27] | BOLT (M8X1.25X30-MM) | |
| 14. | 6Y-4638 | [1] | PLUG-HEX SOCKET (1-5/16-12-THD) | |
| 15. | 7M-8485 | [1] | SEAL-O-RING | |
| 16. | 9M-1974 | [1] | WASHER-HARD (8.8X16X2-MM THK) | |
| 17. | 9X-4609 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
#SEBP39040698
192-0822: WHEEL & FINAL DRIVE GP
192-0822 WHEEL & FINAL DRIVE GP
S/N BTX1-UP
PART OF 137-8833 AXLE AR-FIXED, 137-8832 AXLE AR-OSCILLATING
S/N BTX1-UP
PART OF 137-8833 AXLE AR-FIXED, 137-8832 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 834H WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 6D-0692 | [1] | SEAL-O-RING | |
| 2. | 147-6457 | [1] | SPINDLE | |
| 3. | 3K-0360 | [1] | SEAL-O-RING | |
| 4. | 9S-8005 | [1] | PLUG (3/4-16-THD) | |
| 5. | 9G-5321 | [1] | SEAL GP-DUO-CONE | |
| 6. | 148-1546 | [1] | CONE | |
| 7. | 5D-6298 | [1] | CUP-BEARING | |
| 8. | 137-8845 | [1] | WHEEL | |
| 9. | 137-8846 | [1] | HUB AS | |
| 137-8837 | [1] | BUSHING | ||
| 10. | 8C-8992 M | [8] | BOLT-LOCKING (M12X1.75X30-MM) | |
| 11. | 5T-7676 | [4] | RETAINER | |
| 12. | 137-8843 | [1] | GEAR-RING (81-TEETH) | |
| 13. | 9H-6832 | [1] | SEAL-O-RING | |
| 14. | 192-0816 | [3] | GEAR-PLANETARY (30-TEETH) | |
| 15. | 2R-0098 | [1] | SEAL-O-RING | |
| 16. | 6Y-9885 | [6] | BEARING AS-ROLLER | |
| 17. | 8K-0067 | [3] | SPACER (0.875-IN THK) | |
| 18. | 223-5836 | [3] | SHAFT | |
| 19. | 6T-5545 | [3] | DOWEL | |
| 20. | 8X-4552 | [6] | WASHER (78X127X5-MM THK) | |
| 21. | 200-0818 | [1] | COVER | |
| 22. | 192-0815 | [1] | GEAR-SUN (18-TEETH)(18-TEETH) | |
| 23. | 137-8849 | [1] | PLATE | |
| 24. | 200-0819 | [1] | CARRIER-PLANETARY | |
| 25. | 163-4572 | [1] | PLATE-BEARING | |
| 26. | 175-2853 B | [1] | SHIM PACK (INCLUDES 14-SHIMS) | |
| 27. | 6V-8281 | [1] | CUP-BEARING | |
| 28. | 143-4512 | [1] | CONE | |
| 29. | 9X-2404 M | [10] | BOLT-SOCKET HEAD (M20X2.5X90-MM) | |
| 30. | 8T-3282 | [10] | WASHER-HARD (22X35X3.5-MM THK) | |
| 31. | 6V-3668 M | [11] | BOLT (M12X1.75X30-MM) | |
| 32. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 33. | 8M-3837 | [1] | PLUG-MAGNETIC | |
| 34. | 5F-1678 | [1] | SEAL-O-RING | |
| 35. | 5K-7696 | [1] | PLUG | |
| 36. | 3J-1907 | [1] | SEAL-O-RING | |
| 37. | 6V-1746 | [2] | DOWEL | |
| 38. | 1U-8846 B | SEALANT-GASKET | ||
| 39. | 185-3653 | [1] | WASHER-THRUST | |
| 40. | 1S-3889 | [1] | WASHER | |
| B | USE AS REQUIRED | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
#SEBP39040699
192-0822: WHEEL & FINAL DRIVE GP
192-0822 WHEEL & FINAL DRIVE GP
S/N BTX1-1067
PART OF 137-8833 AXLE AR-FIXED, 137-8832, 368-5017 AXLE AR-OSCILLATING
S/N BTX1-1067
PART OF 137-8833 AXLE AR-FIXED, 137-8832, 368-5017 AXLE AR-OSCILLATING
For full view, you need register
Parts for your 834H WHEEL DOZER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1S-3889 | [1] | WASHER | |
| 2. | 5D-6298 | [1] | CUP-BEARING | |
| 3. | 5K-7696 | [1] | PLUG | |
| 4. | 5T-7676 | [4] | RETAINER | |
| 5. | 8M-3837 | [1] | PLUG-MAGNETIC (FINAL DRIVE, OIL FILL) | |
| 6. | 9G-5321 | [1] | SEAL GP-DUO-CONE | |
| 7. | 137-8843 | [1] | GEAR-RING (81-TEETH) | |
| 8. | 137-8846 | [1] | HUB AS | |
| 137-8837 | [1] | BUSHING | ||
| 9. | 137-8849 | [1] | PLATE | |
| 10. | 147-6457 | [1] | SPINDLE | |
| 11. | 163-4572 | [1] | PLATE-BEARING | |
| 12. | 185-3653 | [1] | WASHER-THRUST | |
| 13. | 192-0815 | [1] | GEAR-SUN (18-TEETH)(18-TEETH) | |
| 14. | 237-0974 | [3] | GEAR-PLANETARY (30-TEETH)(30-TEETH) | |
| 15. | 200-0818 | [1] | COVER | |
| 16. | 467-4571 | [1] | CARRIER-PLANETARY | |
| 17. | 239-4258 C | [3] | BUSHING | |
| 18. | 239-4259 C | [6] | WASHER-THRUST | |
| 19. | 366-2153 | [1] | WHEEL | |
| 20. | 468-4044 | [3] | SHAFT | |
| 21. | 143-4512 | [1] | CONE | |
| 22. | 148-1546 | [1] | CONE | |
| 23. | 175-2853 B | [1] | SHIM PACK (INCLUDES 14-SHIMS) | |
| 24. | 2R-0098 | [1] | SEAL-O-RING | |
| 25. | 3J-1907 | [1] | SEAL-O-RING | |
| 26. | 3K-0360 | [1] | SEAL-O-RING | |
| 27. | 5F-1678 | [1] | SEAL-O-RING | |
| 28. | 6D-0692 | [1] | SEAL-O-RING | |
| 29. | 9Y-2596 | [3] | DOWEL | |
| 30. | 6V-1746 | [2] | DOWEL | |
| 31. | 6V-3668 M | [11] | BOLT (M12X1.75X30-MM) | |
| 32. | 6V-8281 | [1] | CUP-BEARING | |
| 33. | 8C-8992 M | [8] | BOLT-LOCKING (M12X1.75X30-MM) | |
| 34. | 8T-3282 | [10] | WASHER-HARD (22X35X3.5-MM THK) | |
| 35. | 8T-4194 M | [4] | BOLT (M12X1.75X50-MM) | |
| 36. | 9H-6832 | [1] | SEAL-O-RING | |
| 37. | 9S-8005 | [1] | PLUG (3/4-16-THD) | |
| 38. | 9X-2404 M | [10] | BOLT-SOCKET HEAD (M20X2.5X90-MM) | |
| 39. | 1U-8846 B | [1] | SEALANT-GASKET | |
| B | USE AS REQUIRED | |||
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
