BASIC ENGINE
HOUSING GP-FLYWHEELGEAR GP
CYLINDER HEAD GP
ENGINE ARRANGEMENT
ENGINE ARBASIC ENGINE
HOUSING GP-FRONTBASIC ENGINE
HOUSING GP-FLYWHEEL
#SEBP39050120
220-6368: HOUSING GP-FLYWHEEL
For full view, you need register
Parts for your 836H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-5619 | [1] | GASKET | |
| 2. | 175-3721 | [2] | COVER | |
| 3. | 220-8217 | [1] | HOUSING AS-FLYWHEEL | |
| 1W-3136 | [1] | BAFFLE | ||
| 209-8622 | [2] | BUSHING | ||
| 4. | 319-0785 Y | [1] | SEAL GP-CRANKSHAFT (REAR) | |
| 5. | 165-3930 | [7] | BOLT (3/8-16X1.625-IN) | |
| 6. | 165-3932 | [1] | BOLT (3/8-16X2-IN) | |
| 7. | 223-4903 | [6] | BOLT (3/8-16X5-IN) | |
| 8. | 234-8937 | [1] | SEAL-INTEGRAL | |
| 9. | 2P-2772 | [1] | COVER | |
| 10. | 307-2671 C | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 11. | 307-2673 C | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 12. | 321-8642 C | [1] | PLUG AS | |
| 9S-8003 | [1] | PLUG (1/2-20-THD) | ||
| 214-7567 | [1] | SEAL-O-RING | ||
| 13. | 4M-0189 | [2] | SEAL-O-RING | |
| 14. | 5J-5793 | [1] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 15. | 338-4562 | [8] | BOLT-12 POINT HEAD (1/2-13X3.5 IN) | |
| 16. | 5P-8245 | [13] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 6A-5591 M | [4] | BOLT (M12X1.75X25-MM) | |
| 18. | 6V-4248 M | [1] | BOLT (M10X1.5X25-MM) | |
| 19. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 20. | 8T-0643 M | [1] | BOLT (M10X1.5X80-MM) | |
| C | CHANGE FROM PREVIOUS TYPE | |||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39050121
368-6467: HOUSING GP-FLYWHEEL
368-6467 HOUSING GP-FLYWHEEL
S/N TXH1276-UP
PROVIDES CAT 3/4 HOUSING 12 M12X1.75 TRANS BORE. 8 M16X2 SIDE MTG, BOTH SIDES. LEFT, RIGHT STARTER MOUNTING. DUAL RPTO. MOUNTING DOUBLE LIP CRANKSHAFT SEAL.
PART OF 234-7925 ENGINE AR-COMPLETE
FOR USE WITH WET HOUSING APPLICATIONS
S/N TXH1276-UP
PROVIDES CAT 3/4 HOUSING 12 M12X1.75 TRANS BORE. 8 M16X2 SIDE MTG, BOTH SIDES. LEFT, RIGHT STARTER MOUNTING. DUAL RPTO. MOUNTING DOUBLE LIP CRANKSHAFT SEAL.
PART OF 234-7925 ENGINE AR-COMPLETE
FOR USE WITH WET HOUSING APPLICATIONS
For full view, you need register
Parts for your 836H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-5619 | [1] | GASKET | |
| 2. | 175-3721 | [2] | COVER | |
| 3. | 220-8217 | [1] | HOUSING AS-FLYWHEEL | |
| 1W-3136 | [1] | BAFFLE | ||
| 209-8622 | [2] | BUSHING | ||
| 4. | 366-6145 Y | [1] | SEAL GP-CRANKSHAFT | |
| 5. | 165-3930 | [7] | BOLT (3/8-16X1.625-IN) | |
| 6. | 165-3932 | [1] | BOLT (3/8-16X2-IN) | |
| 7. | 223-4903 | [6] | BOLT (3/8-16X5-IN) | |
| 8. | 234-8937 | [1] | SEAL-INTEGRAL | |
| 9. | 2P-2772 | [1] | COVER | |
| 10. | 307-2671 | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8002 | [1] | PLUG (7/16-20-THD) | ||
| 214-7566 | [1] | SEAL-O-RING | ||
| 11. | 307-2673 | [4] | PLUG AS | |
| (EACH INCLUDES) | ||||
| 9S-8005 | [1] | PLUG (3/4-16-THD) | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 12. | 321-8642 | [1] | PLUG AS | |
| 9S-8003 | [1] | PLUG (1/2-20-THD) | ||
| 214-7567 | [1] | SEAL-O-RING | ||
| 13. | 338-4562 | [8] | BOLT-12 POINT HEAD (1/2-13X3.5 IN) | |
| 14. | 4M-0189 | [2] | SEAL-O-RING | |
| 15. | 5J-5793 | [1] | BOLT-12 POINT HEAD (1/2-13X2-IN) | |
| 16. | 5P-8245 | [13] | WASHER-HARD (13.5X25.5X3-MM THK) | |
| 17. | 6A-5591 M | [4] | BOLT (M12X1.75X25-MM) | |
| 18. | 6V-4248 M | [1] | BOLT (M10X1.5X25-MM) | |
| 19. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 20. | 8T-0643 M | [1] | BOLT (M10X1.5X80-MM) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39050122
159-8616: HOUSING GP-FRONT
159-8616 HOUSING GP-FRONT
S/N TXH1276-UP; RHX1-UP
NO SOUND SUPPRESSION
PART OF 234-7925 ENGINE AR-COMPLETE
CANNOT BE USED WITH OIL FILLER, BELT TIGHTENER, BELT TIGHTENER FASTENER AND ALTERNATOR MTG.
S/N TXH1276-UP; RHX1-UP
NO SOUND SUPPRESSION
PART OF 234-7925 ENGINE AR-COMPLETE
CANNOT BE USED WITH OIL FILLER, BELT TIGHTENER, BELT TIGHTENER FASTENER AND ALTERNATOR MTG.
For full view, you need register
Parts for your 836H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 175-1483 | [1] | HOUSING AS-FRONT | |
| 1A. | 3E-8044 | [1] | STUD (1/2-13X2.95-IN) | |
| 2. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 3. | 5M-2894 | [34] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 4. | 0S-1588 | [11] | BOLT (3/8-16X1.25-IN) | |
| 5. | 6I-3968 | [1] | BRACKET-SUPPORT | |
| 6. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 7. | 353-9979 Y | [1] | PLATE AS-FRONT HOUSING | |
| 8. | 166-9144 | [1] | GASKET | |
| 9. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 10. | 0T-0055 | [9] | BOLT (3/8-16X4.25-IN) | |
| 11. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| 12. | 7C-1445 | [1] | COVER | |
| 13. | 061-9455 | [1] | SEAL-O-RING | |
| 14. | 0S-1591 | [2] | BOLT (3/8-16X1.5-IN) | |
| 15. | 2B-2695 | [2] | BOLT (5/16-18X0.875-IN) | |
| 16. | 8S-9191 | [1] | BOLT (3/8-16X4-IN) | |
| 17. | 9M-1974 | [2] | WASHER-HARD (8.8X16X2-MM THK) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39050123
241-0478: HOUSING GP-FRONT
241-0478 HOUSING GP-FRONT
S/N TXH1-UP; RHX1-UP
PART OF 243-5786, 341-8964 HOUSING GP-FRONT
S/N TXH1-UP; RHX1-UP
PART OF 243-5786, 341-8964 HOUSING GP-FRONT
For full view, you need register
Parts for your 836H LANDFILL COMPACTOR:
CATERPILLAR SIS#SEBP39050124
243-5786: HOUSING GP-FRONT
For full view, you need register
Parts for your 836H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 2. | 166-9144 | [1] | GASKET | |
| 3. | 241-0478 Y | [1] | HOUSING GP-FRONT | |
| 4. | 353-9979 Y | [1] | PLATE AS-FRONT HOUSING | |
| 5. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 6. | 0S-1588 | [9] | BOLT (3/8-16X1.25-IN) | |
| 7. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 8. | 5M-2894 | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 9. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 10. | 9S-8752 | [1] | NUT-FULL (3/8-16-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39050125
341-8964: HOUSING GP-FRONT
341-8964 HOUSING GP-FRONT
S/N TXH1-UP; RHX8680-UP
PART OF 225-6108, 349-4447 ENGINE AR-COMPLETE
S/N TXH1-UP; RHX8680-UP
PART OF 225-6108, 349-4447 ENGINE AR-COMPLETE
For full view, you need register
Parts for your 836H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 155-9524 | [1] | SEAL-INTEGRAL | |
| 2. | 166-9144 | [1] | GASKET | |
| 3. | 241-0478 Y | [1] | HOUSING GP-FRONT | |
| 4. | 353-9979 Y | [1] | PLATE AS-FRONT HOUSING | |
| 5. | 0L-2070 | [1] | BOLT (3/8-16X2.25-IN) | |
| 6. | 0S-1588 | [8] | BOLT (3/8-16X1.25-IN) | |
| 7. | 0T-0055 | [1] | BOLT (3/8-16X4.25-IN) | |
| 8. | 129-3172 | [1] | STUD-MOUNTING (3/8-16X1.564-IN) | |
| 9. | 5M-2894 | [20] | WASHER-HARD (10.2X18.5X2.5-MM THK) | |
| 10. | 5P-4255 | [8] | BOLT-LOCKING (3/8-16X1-IN) | |
| 11. | 6V-5839 | [2] | WASHER (11X21X2.5-MM THK) | |
| 12. | 9S-8752 | [2] | NUT-FULL (3/8-16-THD) | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39050126
457-9785: KIT-CYLINDER HEAD GASKET
457-9785 KIT-CYLINDER HEAD GASKET
S/N BXD1-UP
***KIT CONTAINS GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS. **KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@225-6108@@@@@, SEHS0361
S/N BXD1-UP
***KIT CONTAINS GASKETS, SEALS, & BENDABLE LOCKS TO REBUILD & REINSTALL A CYLINDER HEAD. KIT INCLUDES THE TURBO GASKETS. **KIT DOES NOT INCLUDE THE FUEL INJECTOR SEALS. ORDER A SINGLE INJECTOR SEAL KIT AS NEEDED. FOR IN-LINE 4 & 6 CYLINDER ENGINES WITH ONE CYLINDER HEAD ONLY. KIT INCLUDES TURBO MOUNTING HARDWARE
FOR USE WITH @@@@@225-6108@@@@@, SEHS0361
For full view, you need register
Parts for your 836H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 243-1159 | [18] | FASTENER AS | ||
| (EACH INCLUDES) | ||||
| 149-7378 | [1] | GROMMET | ||
| 4P-4460 | [1] | GASKET | ||
| 7N-7559 | [1] | GASKET | ||
| 227-1204 | [1] | GASKET | ||
| 357-1752 | [1] | GASKET-TURBOCHARGER | ||
| 359-0908 | [1] | GASKET-CYLINDER HEAD | ||
| 139-3550 | [1] | GASKET-REGULATOR (HOUSING) | ||
| 4N-1156 | [1] | GASKET-REGULATOR COVER | ||
| 375-2467 M | [4] | LOCKNUT-FLANGE (M10X1.5-THD) | ||
| 142-2329 | [1] | SEAL | ||
| 160-7271 | [1] | SEAL | ||
| 272-0390 | [1] | SEAL | ||
| 3E-6772 | [24] | SEAL (WATER) | ||
| 6V-0128 | [1] | SEAL-CONNECTOR | ||
| 3S-9643 | [2] | SEAL-LIP TYPE | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 3P-1155 | [1] | SEAL-O-RING | ||
| 5E-8771 | [1] | SEAL-O-RING | ||
| 5P-0840 | [2] | SEAL-O-RING | ||
| 6V-1197 | [1] | SEAL-O-RING | ||
| 6V-3251 | [1] | SEAL-O-RING | ||
| 6V-6609 | [7] | SEAL-O-RING | ||
| 6V-9027 | [1] | SEAL-O-RING | ||
| 8C-3089 | [1] | SEAL-O-RING | ||
| 117-8801 | [1] | SEAL-O-RING | ||
| 214-7566 | [3] | SEAL-O-RING | ||
| 214-7568 | [10] | SEAL-O-RING | ||
| 228-4947 | [1] | SEAL-O-RING | ||
| 238-5078 | [2] | SEAL-O-RING | ||
| 238-5080 | [2] | SEAL-O-RING | ||
| 242-9537 | [3] | SEAL-VALVE COVER | ||
| 357-0351 M | [4] | STUD-TAPERLOCK (M10X1.5X60-MM) | ||
| FOR A LIST OF RELATED PARTS THAT MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
| M | METRIC PART | |||
#SEBP39050127
436-3459: KIT-ENGINE GASKET
436-3459 KIT-ENGINE GASKET -CENTRAL, LOWER STRUCTURE
S/N TXH1-UP; RHX1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP & BLOCK COVERS
S/N TXH1-UP; RHX1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE OIL PAN, INTERNAL OIL PUMP & BLOCK COVERS
For full view, you need register
Parts for your 836H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 4N-0699 | [1] | GASKET | ||
| 7E-4342 | [1] | GASKET | ||
| 345-0412 | [2] | GASKET | ||
| 165-6170 | [3] | PLUG | ||
| 126-4935 | [2] | SEAL-INTEGRAL (WATER TEMPERATURE REGULATOR) | ||
| 6V-5048 | [1] | SEAL-O-RING | ||
| 109-0072 | [1] | SEAL-O-RING | ||
| 109-0078 | [1] | SEAL-O-RING | ||
| 3J-7354 | [1] | SEAL-O-RING | ||
| 5P-5846 | [1] | SEAL-O-RING | ||
| 5P-8068 | [1] | SEAL-O-RING | ||
| 6V-3683 | [1] | SEAL-O-RING | ||
| 6V-3830 | [1] | SEAL-O-RING | ||
| 6V-6609 | [3] | SEAL-O-RING | ||
| 8J-4351 | [1] | SEAL-O-RING | ||
| 109-0076 | [1] | SEAL-O-RING | ||
| 118-5068 | [1] | SEAL-O-RING | ||
| 210-9246 | [2] | SEAL-O-RING | ||
| 214-7566 | [4] | SEAL-O-RING | ||
| 214-7568 | [1] | SEAL-O-RING | ||
| 228-7089 | [1] | SEAL-O-RING | ||
| 238-5080 | [6] | SEAL-O-RING | ||
| 238-5081 | [1] | SEAL-O-RING | ||
| 238-5084 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSISST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
#SEBP39050128
449-6053: KIT-ENGINE GASKET
449-6053 KIT-ENGINE GASKET -REAR STRUCTURE
S/N BXD1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
S/N BXD1-UP
KIT CONTAINS GASKETS, SEALS, AND BENDABLE LOCKS TO REINSTALL THE REAR COVER. KIT DOES NOT INCLUDE THE OIL PAN GASKET
For full view, you need register
Parts for your 836H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 2A-1162 | [1] | GASKET | ||
| 9Y-6089 | [2] | GASKET | ||
| 155-5619 | [1] | GASKET | ||
| 268-5582 | [1] | SEAL | ||
| 268-5589 | [1] | SEAL | ||
| 142-5868 | [1] | SEAL-CRANKSHAFT (REAR)(REAR) | ||
| 160-7037 | [1] | SEAL-INTEGRAL | ||
| 234-8937 | [2] | SEAL-INTEGRAL | ||
| 230-3728 | [1] | SEAL-O-RING | ||
| 250-0466 | [1] | SEAL-O-RING | ||
| FOR A LIST OF RELATED PARTS MAY BE REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTP://DEALER.CAT.COM/RELATED | ||||
#SEBP39050129
436-3458: KIT-FRONT COVER GASKET
436-3458 KIT-FRONT COVER GASKET
S/N BXD1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@225-6108@@@@@
S/N BXD1-UP
CONTAINS THE GASKETS, SEALS, & BENDABLE LOCKS TO REINSTALL THE FRONT COVER. THIS KIT DOES NOT INCLUDE THE OIL PAN GASKET
FOR USE WITH @@@@@225-6108@@@@@
For full view, you need register
Parts for your 836H LANDFILL COMPACTOR:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 166-9144 | [1] | GASKET | ||
| 9H-8872 | [1] | GASKET | ||
| 160-7271 | [1] | SEAL | ||
| 142-5867 | [1] | SEAL-CRANKSHAFT (FRONT) | ||
| 144-6142 | [1] | SEAL-INTEGRAL | ||
| 155-9524 | [1] | SEAL-INTEGRAL | ||
| 203-3940 | [2] | SEAL-O-RING | ||
| 3P-1155 | [1] | SEAL-O-RING | ||
| 5E-8771 | [1] | SEAL-O-RING | ||
| 6V-6609 | [3] | SEAL-O-RING | ||
| 8T-9527 | [1] | SEAL-O-RING | ||
| 9M-3786 | [1] | SEAL-O-RING | ||
| 061-9455 | [1] | SEAL-O-RING | ||
| 107-5769 | [2] | SEAL-O-RING | ||
| 109-0077 | [1] | SEAL-O-RING | ||
| 117-8801 | [1] | SEAL-O-RING | ||
| 122-3772 | [1] | SEAL-O-RING | ||
| 214-7566 | [4] | SEAL-O-RING | ||
| 214-7568 | [3] | SEAL-O-RING | ||
| 228-4947 | [2] | SEAL-O-RING | ||
| 228-7089 | [1] | SEAL-O-RING | ||
| 230-3728 | [1] | SEAL-O-RING | ||
| 238-5078 | [2] | SEAL-O-RING | ||
| 238-5080 | [1] | SEAL-O-RING | ||
| 126-1757 | [9] | WASHER (10.85X19.3X1.27-MM THK) | ||
| 129-5427 | [2] | WASHER-SPECIAL (SEALING) | ||
| FOR A LIST OF RELATED PARTS THAT REQUIRED FOR THE ENGINE REBUILD TO THE KIT CONSIST, PLEASE VISIT | ||||
| HTTPS://DEALER.CAT.COM/RELATED | ||||
