ELECTRICAL AND STARTING SYSTEM
SENSOR GPELECTRICAL AND STARTING SYSTEM
SENSOR GP
#SEBP39060500
302-5668: SENSOR GP-PRESSURE
302-5668 SENSOR GP-PRESSURE -PAYLOAD CONTROL
S/N BXY1-UP
S/N BXY1-UP
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 221-3416 Y | [1] | SENSOR GP-PRESSURE (PAYLOAD) | ||
| 265-2834 | [1] | BLOCK | ||
| 8T-4648 M | [2] | BOLT (M12X1.75X70-MM) | ||
| 8T-4910 M | [2] | BOLT (M12X1.75X60-MM) | ||
| 6L-5551 | [2] | BOLT-SOCKET HEAD (1/4-20X2.25-IN) | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 3J-1907 | [1] | SEAL-O-RING | ||
| 8T-4223 | [2] | WASHER-HARD (13.5X25.5X3-MM THK) | ||
| AVAILABLE REPAIR KIT(S): | ||||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39060501
385-1173: SENSOR GP-PRESSURE
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 341-0643 | [2] | SEAL-RECTANGULAR |
#SEBP39060502
193-2550: SENSOR GP-SPEED
193-2550 SENSOR GP-SPEED
S/N SMA114-UP; DRT1-UP; BXY1-UP
PART OF 133-8116 GEAR GP-OUTPUT TRANSFER
FIELD REPLACEMENT ORDER @@@@@318-1178@@@@@
S/N SMA114-UP; DRT1-UP; BXY1-UP
PART OF 133-8116 GEAR GP-OUTPUT TRANSFER
FIELD REPLACEMENT ORDER @@@@@318-1178@@@@@
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS#SEBP39060503
201-6617: SENSOR GP-SPEED
201-6617 SENSOR GP-SPEED
S/N TXH1-UP; RHX1-UP
HIGH OUTPUT
PART OF 239-5928 SENSOR GP-SPEED
S/N TXH1-UP; RHX1-UP
HIGH OUTPUT
PART OF 239-5928 SENSOR GP-SPEED
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 133-0261 | [1] | BRACKET | |
| 2. | 189-0852 | [1] | HARNESS AS-WIRING (SPEED SENSOR) | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9X-1813 E | SLEEVE (16-CM) | |||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 180-9339 | [2] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
| 180-9340 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP39060504
214-2484: SENSOR GP-SPEED
214-2484 SENSOR GP-SPEED
S/N TXH1-UP; RHX1-UP
PART OF 231-1973, 354-0041 SENSOR GP-ENGINE
S/N TXH1-UP; RHX1-UP
PART OF 231-1973, 354-0041 SENSOR GP-ENGINE
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS#SEBP39060505
239-5928: SENSOR GP-SPEED
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS#SEBP39060506
300-9804: SENSOR GP-SPEED
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 228-4947 | [1] | SEAL-O-RING | |
| 2. | 279-9830 | [1] | SENSOR GP-SPEED (TIMING, CAMSHAFT) | |
| 280-8707 | [1] | HARNESS AS-SENSOR | ||
| 9X-3401 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| -OR- | ||||
| 126-1767 | [2] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
| (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 230-4012 | [1] | RECEPTACLE AS-CONNECTOR (2-PIN) | ||
| 9X-1813 E | SLEEVE (16-CM) | |||
| 180-9340 | [2] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
| E | ORDER BY THE CENTIMETER | |||
#SEBP39060507
318-1178: SENSOR GP-SPEED
318-1178 SENSOR GP-SPEED
S/N DRT1-UP; BXY1-UP
FIELD REPLACEMENT FOR @@@@@193-2550@@@@@
S/N DRT1-UP; BXY1-UP
FIELD REPLACEMENT FOR @@@@@193-2550@@@@@
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS#SEBP39060508
118-7226: SENSOR GP-TEMPERATURE
118-7226 SENSOR GP-TEMPERATURE -TRANSMISSION OIL
S/N DRT1-UP; BXY1-UP
8-VOLTS
PART OF 230-6318 CONTROL GP-TRANSMISSION HYD
S/N DRT1-UP; BXY1-UP
8-VOLTS
PART OF 230-6318 CONTROL GP-TRANSMISSION HYD
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| (NO SERVICED PARTS) | ||||
#SEBP39060509
131-0427: SENSOR GP-TEMPERATURE
131-0427 SENSOR GP-TEMPERATURE
S/N BXY1-1899
8-VOLT. PULSE WIDTH MODULATION
PART OF 225-6852 WIRING GP-FRONT, 225-6859 WIRING GP-MACHINE
S/N BXY1-1899
8-VOLT. PULSE WIDTH MODULATION
PART OF 225-6852 WIRING GP-FRONT, 225-6859 WIRING GP-MACHINE
For full view, you need register
Parts for your 988H WHEEL LOADER:
CATERPILLAR SISInformation:
ELECTRICAL AND STARTING SYSTEM
SENSOR GP
Operation and Maintenance Manual
System Components
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Object Detection Sensor - Clean/Inspect
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Object Detection Sensor - Inspect/Adjust
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Washing System - Check
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Cat® Detect Object Detection System Software Version 3 for Certain Wheel Loaders, Wheel Dozers, Quarry Trucks, Off-Highway Truck/Tractors, Motor Graders, and Articulated Trucks
Special Instruction
Process for Removal and Installation of the Position Sensor in the Lift Cylinder{5102, 5736}
Process for Removal and Installation of the Position Sensor in the Lift Cylinder{5102, 5736}
Process for Removal and Installation of the Position Sensor in the Lift Cylinder{5102, 5736}
Installation Of The Transmission Output Speed Sensor{3175}
Installation Of The Transmission Output Speed Sensor{3175}
Installation Of The Transmission Output Speed Sensor{3175}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Selecting the Correct Part Numbers for Sensors and Connectors{1439, 7553}
Field Installation of the Payload Control System{1408, 1925, 5057, 7490, 7494, 7601, 7610, 7620}
Field Installation of the Payload Control System{1408, 1925, 5057, 7490, 7494, 7601, 7610, 7620}
Field Installation of the Payload Control System{1408, 1925, 5057, 7490, 7494, 7601, 7610, 7620}
Installation of the 2Q-8781 Rear Vision Camera on the 824H, 834H Wheel Dozer, 825H Soil Compactor, 826H, 836H Landfill Compactor, and 988H Wheel Loader{1408, 7348, 7490}
Installation of the 2Q-8781 Rear Vision Camera on the 824H, 834H Wheel Dozer, 825H Soil Compactor, 826H, 836H Landfill Compactor, and 988H Wheel Loader{1408, 7348, 7490}
Installation of the 2Q-8781 Rear Vision Camera on the 824H, 834H Wheel Dozer, 825H Soil Compactor, 826H, 836H Landfill Compactor, and 988H Wheel Loader{1408, 7348, 7490}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Procedure to Test the Position Sensor of a Hydraulic Cylinder {1439, 7562}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE LEFT PEDAL ON CERTAIN 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, AND 990H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE LEFT PEDAL ON CERTAIN 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, AND 990H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE LEFT PEDAL ON CERTAIN 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, AND 990H WHEEL LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Error Codes for the Transmission Output Speed Sensors May Be Logged{3030, 3175, 7610, 7620}
Position Sensor Failures on 988G and 988H Machines that are Equipped for Steel Mill Applications{5736}
Position Sensor Failures on 988G and 988H Machines that are Equipped for Steel Mill Applications{5736}
Position Sensor Failures on 988G and 988H Machines that are Equipped for Steel Mill Applications{5736}
The Left Brake Pedal Position Sensor May Have a Problem{4809}
The Left Brake Pedal Position Sensor May Have a Problem{4809}
The Left Brake Pedal Position Sensor May Have a Problem{4809}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
An Intermittent Rotary Position Sensor Signal Can Cause The Transmission To Neutralize Or The Impeller Clutch Loss Of Power{3134, 3191, 5737}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
Primary Engine Speed Sensor Malfunctioning, Shorted, Open Circuit {1907, 1912}
The Rotary Position Sensor May Fail on Certain Large Wheel Loaders {5702, 5736, 5737}
The Rotary Position Sensor May Fail on Certain Large Wheel Loaders {5702, 5736, 5737}
The Rotary Position Sensor May Fail on Certain Large Wheel Loaders {5702, 5736, 5737}
Specifications
Position Sensor (Throttle)
988H Wheel Loader, 834H Wheel Dozer and 836H Landfill Compactor Machine Systems
988H Wheel Loader, 834H Wheel Dozer and 836H Landfill Compactor Machine Systems
Temperature Sensor (Torque Converter Oil) (Transmission Lubrication Oil)
988H Wheel Loader Power Train
988H Wheel Loader Power Train
Pressure Sensor (Lift Cylinder Head End Oil) (Lift Cylinder Rod End Oil)
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Temperature Sensor (Torque Converter Oil) (Transmission Lubrication Oil)
988H Wheel Loader Power Train
988H Wheel Loader Power Train
Inlet Manifold Temperature Sensor - Charge Air Cooler Outlet
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Tool Operating Manual
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 265-4177, 265-4209 Service Tool Groups to Install Sensors in Position-Sensing Hydraulic Cylinders{0599, 0709, 0738, 1439, 7562, 7562}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE LEFT PEDAL ON CERTAIN 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, AND 990H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE LEFT PEDAL ON CERTAIN 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, AND 990H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE LEFT PEDAL ON CERTAIN 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, AND 990H WHEEL LOADERS
Service Letter-Asia
Systems Operation
Reuse And Salvage Guidelines
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Reuse Guideline for Hydraulic Cylinder Position Sensor {5574, 5736}
Custom Service Information
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Replacement of the 124-4672 Pressure Sensor for the Payload Control System {1439, 7494}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE LEFT PEDAL ON CERTAIN 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, AND 990H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE LEFT PEDAL ON CERTAIN 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, AND 990H WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE ROTARY POSITION SENSOR ON THE LEFT PEDAL ON CERTAIN 815F, AND 825H SOIL COMPACTORS, 816F, 826H, AND 836H LANDFILL COMPACTORS, 824H, 834H, AND 844H WHEEL DOZERS, 988H, AND 990H WHEEL LOADERS
Testing and Adjusting
Position Sensor for the Control Lever (Electronic Technician) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Position Sensor for the Control Lever (Operator Monitor) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Position Sensor for the Lift Linkage (Operator Monitor) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Position Sensor for the Tilt Linkage (Operator Monitor) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Position Sensor (Left Brake Pedal) (Electronic Technician) - Calibrate
988H Wheel Loader Power Train
988H Wheel Loader Power Train
Position Sensor for the Lift Linkage (Electronic Technician) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Position Sensor for the Tilt Linkage (Electronic Technician) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Position Sensor for the Control Lever (Electronic Technician) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Position Sensor for the Lift Linkage (Electronic Technician) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Position Sensor for the Tilt Linkage (Electronic Technician) - Calibrate
988H Wheel Loader Electrohydraulic System
988H Wheel Loader Electrohydraulic System
Troubleshooting
Disassembly and Assembly
Inlet Air Temperature Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Turbocharger Outlet Pressure Sensor - Remove and Install
C15 and C18 Engines for Caterpillar Built Machines
C15 and C18 Engines for Caterpillar Built Machines
Service Magazine
Correction to Service Magazine , "Improved Speed Sensors Are Now Available" {1439, 3141, 3175, 4803}
2012/01/09
2012/01/09
New Troubleshooting Information For Internal Cylinder Position Sensors Is Now Available {1439, 7562}
2009/09/14
2009/09/14
Improved Tilt Sensor Bracket Now Used on Certain Wheel Loader Machines {1408, 1439, 5736}
2011/03/29
2011/03/29
