AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

7W-0282 POWER TAKE-OFF GP CLUTCH CANNOT BE USED WITH ATTACHMENT DAMPER GP, NON-CAT GENERATOR AND FRONT POWER TAKE-OFF AT RATED SPEEDS GREATER THAN 1650-RPM AN ATTACHMENT 3508B


BASIC ENGINE
POWER TAKE-OFF GP
PULLEY GP
CRANKSHAFT GP
DRIVE GP-AUXILIARY

MARINE ENGINE 3508B MARINE ENGINE S2E
 3508B Marine Engine S2E00001-UP SEBP3910 3508B S2E   (2003)

BASIC ENGINE

POWER TAKE-OFF GP
POWER TAKE-OFF GP
7W-0281 POWER TAKE-OFF GP
POWER TAKE-OFF GP
7W-0282 POWER TAKE-OFF GP
 

#SEBP39100120
 

7W-0282: POWER TAKE-OFF GP

7W-0282 POWER TAKE-OFF GP
CLUTCH
CANNOT BE USED WITH ATTACHMENT DAMPER GP, NON-CAT GENERATOR AND FRONT POWER TAKE-OFF AT RATED SPEEDS GREATER THAN 1650-RPM
AN ATTACHMENT
i01133090 SEBP3910
7W0282 POWER TAKE-OFF GP Parts scheme
  For full view, you need register

Parts for your 3508B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3N-4130 Y [1] CLUTCH GP (BASIC)  
2. 2W-8014 [1] COUPLING-FRONT PTO  
3. 7W-0287 [1] ADAPTER-DAMPER  
4. 5F-6932 [6] BOLT (1-14X7-IN)  
5. 5P-8250 [6] WASHER (28X49X5-MM THK)  
6. 171-4571 CY [1] DAMPER GP  
7. 7W-0285 [1] ADAPTER AS-FRONT  
  4N-0683 [2] DOWEL  
8. 0S-1587 [10] BOLT (1/2-13X1.75-IN)  
9. 5P-8245 [10] WASHER-HARD (13.5X25.5X3-MM THK)  
10. 0T-0320 [12] BOLT (7/16-14X1.25-IN)  
11. 7F-8896 [1] KEY-SQUARE  
  C   CHANGE FROM PREVIOUS TYPE
  R   REMANUFACTURED PART MAY BE AVAILABLE
  Y   SEPARATE ILLUSTRATION
 

#SEBP39100121
 

7N-4106: PULLEY AS-CRANKSHAFT

7N-4106 PULLEY AS-CRANKSHAFT
196.85-MM DIAMETER (7.75-IN)
FOR USE WITH LOW KW STUB SHAFT GP
AN ATTACHMENT
i00606336 SEBP3910
7N4106 PULLEY AS-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3508B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-0335 B [1] KIT-BUSHING (CRANKSHAFT PULLEY)  
    (INCLUDES BUSHING, CAP SCREWS, LOCKWASHERS, SET SCREW & KEY)
2. [1] PULLEY-CRANKSHAFT  
3. 0S-1590 [3] BOLT (3/8-16X2-IN)  
4. 5M-2894 [3] WASHER-HARD (10.2X18.5X2.5-MM THK)  
  B   USE AS REQUIRED
 

#SEBP39100122
 

8N-6564: PULLEY AS-CRANKSHAFT

8N-6564 PULLEY AS-CRANKSHAFT
247.65-MM DIAMETER (9.75-IN)
FOR USE WITH LOW KW STUB SHAFT GP
AN ATTACHMENT
i00606337 SEBP3910
8N6564 PULLEY AS-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3508B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 4W-0335 [1] KIT-BUSHING (CRANKSHAFT PULLEY)  
    (INCLUDES BUSHING, BOLTS, LOCKWASHER, SET SCREW & KEY)
2. [1] PULLEY-CRANKSHAFT  
 

#SEBP39100123
 

210-9214: PULLEY GP-AUXILIARY DRIVE

210-9214 PULLEY GP-AUXILIARY DRIVE -LOWER FRONT, LH
AN ATTACHMENT
i01649425 SEBP3910
2109214 PULLEY GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3508B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-7371 [1] SEAL-O-RING  
2. 7N-7991 [1] ADAPTER  
3. 7N-8011 [1] PULLEY  
4. 0L-1352 [8] BOLT (3/8-16X3.25-IN)  
5. 0S-1590 [4] BOLT (3/8-16X2-IN)  
6. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
7. 7C-7808 [1] SEAL-LIP TYPE  
8. 9L-9132 [4] WASHER (10.2X25.5X2.5-MM THK)  
 

#SEBP39100124
 

7N-8041: PULLEY GP-AUXILIARY DRIVE

7N-8041 PULLEY GP-AUXILIARY DRIVE -UPPER FRONT, LH
AN ATTACHMENT
i00410834 SEBP3910
7N8041 PULLEY GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3508B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-7371 [1] SEAL-O-RING  
2. 7C-7808 [1] SEAL-LIP TYPE  
3. 7N-7991 [1] ADAPTER  
4. 7N-8011 [1] PULLEY  
5. 0L-1352 [8] BOLT (3/8-16X3.25-IN)  
6. 0S-1621 [4] BOLT (1/2-13X1-IN)  
7. 5M-2894 [8] WASHER-HARD (10.2X18.5X2.5-MM THK)  
 

#SEBP39100125
 

8N-8467: PULLEY GP-AUXILIARY DRIVE

8N-8467 PULLEY GP-AUXILIARY DRIVE -LOWER FRONT, LH
AN ATTACHMENT
i00415300 SEBP3910
8N8467 PULLEY GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3508B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0L-1351 [4] BOLT (3/8-16X0.875-IN)  
2. 9Y-5286 C [1] PULLEY AS  
2A. 053-5065 [1] SLEEVE  
3. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
4. 8T-6759 [1] PLUG-PIPE  
5. 5P-0840 [1] SEAL-O-RING  
6. 259-4598 [1] SEAL-O-RING  
7. 235-2484 [1] SEAL-LIP TYPE  
8. 7C-4165 [1] ADAPTER AS  
8A. 127-5400 [1] BUSHING  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP39100126
 

8N-8468: PULLEY GP-AUXILIARY DRIVE

8N-8468 PULLEY GP-AUXILIARY DRIVE -UPPER REAR, RH
AN ATTACHMENT
i00415307 SEBP3910
8N8468 PULLEY GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3508B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 0S-1571 [4] BOLT (3/8-16X1.75-IN)  
2. 9Y-5286 C [1] PULLEY AS  
2A. 053-5065 [1] SLEEVE  
3. 235-2484 [1] SEAL-LIP TYPE  
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP39100127
 

7W-3813: SEAL GP-CRANKSHAFT

7W-3813 SEAL GP-CRANKSHAFT
i00090785 SEBP3910
7W3813 SEAL GP-CRANKSHAFT Parts scheme
  For full view, you need register

Parts for your 3508B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 113-8433 C [1] SEAL (COUNTERCLOCKWISE ROTATION)  
    (INSTALL IN FLYWHEEL HOUSING ON STANDARD ROTATION ENGINES & IN FRONT HOUSING ON REVERSE ROTATION ENGINES)
2. 113-8432 C [1] SEAL (CLOCKWISE ROTATION)  
    (INSTALL IN FRONT HOUSING ON STANDARD ROTATION ENGINES & IN FLYWHEEL HOUSING ON REVERSE ROTATION ENGINES)
  C   CHANGE FROM PREVIOUS TYPE
 

#SEBP39100128
 

209-3559: SHAFT GP-AUXILIARY DRIVE

209-3559 SHAFT GP-AUXILIARY DRIVE -UPPER FRONT, RH
AN ATTACHMENT
i01563677 SEBP3910
2093559 SHAFT GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3508B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7991 [1] ADAPTER  
2. 9Y-4957 [1] SHAFT-STUB  
3. 053-2294 [8] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
4. 0S-1621 [4] BOLT (1/2-13X1-IN)  
5. 9X-7371 [1] SEAL-O-RING  
6. 7C-7808 [1] SEAL-LIP TYPE  
 

#SEBP39100129
 

209-3560: SHAFT GP-AUXILIARY DRIVE

209-3560 SHAFT GP-AUXILIARY DRIVE -UPPER REAR, LH
AN ATTACHMENT
i01563674 SEBP3910
2093560 SHAFT GP-AUXILIARY DRIVE Parts scheme
  For full view, you need register

Parts for your 3508B MARINE ENGINE:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 7N-7991 [1] ADAPTER  
2. 9Y-4957 [1] SHAFT-STUB  
3. 053-2294 [8] BOLT-12 POINT HEAD (3/8-16X1.75-IN)  
4. 0S-1590 [4] BOLT (3/8-16X2-IN)  
5. 9X-7371 [1] SEAL-O-RING  
6. 7C-7808 [1] SEAL-LIP TYPE  
7. 9L-9132 [4] WASHER (10.2X25.5X2.5-MM THK)  
 

Information:

Caterpillar Parts SIS Catalog 3508B :

POWER TAKE-OFF GP
7W-0281 POWER TAKE-OFF GP
PISTON & ROD GP
281-6139 PISTON & ROD GP
PISTON & ROD GP
223-6363 PISTON & ROD GP
359-6239 PARTS GP-ENGINE OVERHAUL
PAN GP-OIL
9Y-3086 PAN GP-OIL
PAN GP-OIL
9Y-3086 PAN GP-OIL
PAN GP-OIL
9Y-3083 PAN GP-OIL
PAN GP-OIL
9Y-3083 PAN GP-OIL
PULLEY AS-CRANKSHAFT
7N-4106 PULLEY AS-CRANKSHAFT
PULLEY AS-CRANKSHAFT
8N-6564 PULLEY AS-CRANKSHAFT
PULLEY GP-AUXILIARY DRIVE
210-9214 PULLEY GP-AUXILIARY DRIVE
PULLEY GP-AUXILIARY DRIVE
7N-8041 PULLEY GP-AUXILIARY DRIVE
PULLEY GP-AUXILIARY DRIVE
8N-8467 PULLEY GP-AUXILIARY DRIVE
PULLEY GP-AUXILIARY DRIVE
8N-8468 PULLEY GP-AUXILIARY DRIVE
SEAL GP-CRANKSHAFT
7W-3813 SEAL GP-CRANKSHAFT
SHAFT GP-AUXILIARY DRIVE
209-3559 SHAFT GP-AUXILIARY DRIVE

Truck sale:

Caterpillar 3508B
 
Caterpillar 3508B
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3508B, Industrial engines, Construction
175,500 
Caterpillar 3508B, Industrial engines, Construction
- Industrial engines
RING POWER CORP.
Caterpillar 3508B, Stationary Generator Sets, Construction
175,000 
Caterpillar 3508B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Caterpillar 3508B, Stationary Generator Sets, Construction
175,000 
Caterpillar 3508B, Stationary Generator Sets, Construction
- Stationary Generator Sets
FOLEY EQUIPMENT COMPANY
Caterpillar 3508B, Stationary Generator Sets, Construction
175,000 
Caterpillar 3508B, Stationary Generator Sets, Construction
- Stationary Generator Sets
MACALLISTER MACHINERY CO., INC
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.