ELECTRICAL AND STARTING SYSTEM
HARNESS GPELECTRICAL AND STARTING SYSTEM
HARNESS GP#SEBP39160540
478-8982: HARNESS AS-SENSOR
478-8982 HARNESS AS-SENSOR -OIL, FUEL PRESSURE
RH
PART OF 307-0008 WIRING GP-ENGINE
AN ATTACHMENT
RH
PART OF 307-0008 WIRING GP-ENGINE
AN ATTACHMENT
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
254-5668 | [1] | ADAPTER (CONDUIT) | ||
276-7608 | [1] | ADAPTER | ||
283-0056 | [8] | ADAPTER-CONNECTOR | ||
232-0893 E | CONDUIT-FLEXIBLE (6.2-MM ID)(119-CM) | |||
232-0895 E | CONDUIT-FLEXIBLE (9.6-MM ID)(77-CM) | |||
232-0897 E | CONDUIT-FLEXIBLE (16.2-MM ID)(77-CM) | |||
238-9802 | [1] | FITTING | ||
263-6465 | [1] | FITTING-ADAPTER | ||
237-0227 | [4] | PLUG AS-CONNECTOR (3-PIN) | ||
(EACH INCLUDES) | ||||
455-0705 | [1] | SEAL-CONNECTOR | ||
8C-3654 | [1] | PLUG-CONNECTOR (6-PIN) | ||
8T-8730 | [18] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
9X-8243 E | TUBE-HEAT SHRINK (39.9-MM DIA)(5-CM) | |||
125-7875 E | TUBE-HEAT SHRINK (7.44-MM DIA)(10-CM) | |||
E | ORDER BY THE CENTIMETER |
#SEBP39160541
5N-9366: HARNESS AS-SENSOR
5N-9366 HARNESS AS-SENSOR
FOR USE WITH INSTRUMENT PANEL, THERMOCOUPLE AND PYROMETER
AN ATTACHMENT
FOR USE WITH INSTRUMENT PANEL, THERMOCOUPLE AND PYROMETER
AN ATTACHMENT
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
(NO SERVICED PARTS) |
#SEBP39160542
237-8991: HARNESS AS-SOLENOID
237-8991 HARNESS AS-SOLENOID
PART OF 232-0901 CONTROL GP-AIR STARTING
FOR USE WITH RH MOUNTED AIR START
AN ATTACHMENT
PART OF 232-0901 CONTROL GP-AIR STARTING
FOR USE WITH RH MOUNTED AIR START
AN ATTACHMENT
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
3T-3048 | [1] | CLIP AS | ||
232-0897 E | CONDUIT-FLEXIBLE (16.2-MM ID)(62-CM) | |||
7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
8T-8731 | [1] | PLUG-CONNECTOR (3-PIN) | ||
8T-8737 | [1] | PLUG-SEAL | ||
7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
186-3736 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
097-7404 J | TUBE-HEAT SHRINK (19.1-MM DIA)(1-DM) | |||
5P-5677 BD | WIRE (18-GA, BLACK) | |||
B | USE AS REQUIRED | |||
D | ORDER BY THE METER | |||
E | ORDER BY THE CENTIMETER | |||
J | ORDER BY THE DECIMETER |
#SEBP39160543
237-8995: HARNESS AS-SOLENOID
237-8995 HARNESS AS-SOLENOID
PART OF 238-9734 CONTROL GP-AIR STARTING
FOR USE WITH LH MOUNTED AIR START
AN ATTACHMENT
PART OF 238-9734 CONTROL GP-AIR STARTING
FOR USE WITH LH MOUNTED AIR START
AN ATTACHMENT
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
3T-3048 | [1] | CLIP AS | ||
232-0897 E | CONDUIT-FLEXIBLE (16.2-MM ID)(70-CM) | |||
7N-9737 | [1] | HOUSING-RECEPTACLE (14-GA TO 18-GA) | ||
7N-7780 | [1] | PIN-CONNECTOR (14-GA TO 18-GA) | ||
203-9000 | [1] | PLUG AS (6-PIN) | ||
203-8999 | [2] | SEAL | ||
203-9001 | [2] | SLEEVE | ||
8T-8737 | [4] | PLUG-SEAL | ||
7N-7779 | [1] | SOCKET-CONNECTOR (14-GA TO 18-GA) | ||
186-3736 | [2] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
135-5009 | TUBE-HEAT SHRINK (32-MM DIA)(1CM) | |||
097-7404 J | TUBE-HEAT SHRINK (19.1-MM DIA)(1-DM) | |||
5P-5677 BD | WIRE (18-GA, BLACK) | |||
B | USE AS REQUIRED | |||
D | ORDER BY THE METER | |||
E | ORDER BY THE CENTIMETER | |||
J | ORDER BY THE DECIMETER |
#SEBP39160544
391-6822: HARNESS AS-TRANSMISSION
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS#SEBP39160545
391-6823: HARNESS AS-TRANSMISSION
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS#SEBP39160546
391-6827: HARNESS AS-TRANSMISSION
391-6827 HARNESS AS-TRANSMISSION
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
8T-8730 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
8T-8737 | [8] | PLUG-SEAL | ||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) |
#SEBP39160547
391-6830: HARNESS AS-TRANSMISSION
391-6830 HARNESS AS-TRANSMISSION
AN ATTACHMENT
AN ATTACHMENT
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
8T-8730 | [16] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
8T-8737 | [8] | PLUG-SEAL | ||
102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
(KIT INCLUDES RECEPTACLE AS & WEDGE) | ||||
155-2255 | [1] | KIT-CONNECTING PLUG (12-PIN) | ||
155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
155-2270 | [1] | KIT-CONNECTING PLUG (2-PIN) | ||
(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) |
#SEBP39160548
239-1473: HARNESS AS-WIRING
239-1473 HARNESS AS-WIRING -THERMOCOUPLE, RH
PART OF 239-6364 WIRING GP-ENGINE, 239-1472 WIRING GP-PANEL
AN ATTACHMENT
PART OF 239-6364 WIRING GP-ENGINE, 239-1472 WIRING GP-PANEL
AN ATTACHMENT
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SIS#SEBP39160549
239-1474: HARNESS AS-WIRING
239-1474 HARNESS AS-WIRING -THERMOCOUPLE, LH
PART OF 239-6364 WIRING GP-ENGINE, 239-1472 WIRING GP-PANEL
AN ATTACHMENT
PART OF 239-6364 WIRING GP-ENGINE, 239-1472 WIRING GP-PANEL
AN ATTACHMENT
Parts for your 3512B MARINE ENGINE:
CATERPILLAR SISPos. | Part No | Qty | Parts name | Comments |
---|---|---|---|---|
1. | 122-4386 | [2] | CONNECTOR-PLUG (23-PIN) | |
2. | 235-2762 | [2] | CONNECTOR (CONDUIT) | |
186-3736 F | [32] | SOCKET-CONNECTOR (16-GA TO 18-GA) | ||
8T-8737 F | [14] | PLUG-SEAL | ||
231-9895 EF | CONDUIT-FLEXIBLE (21.9-MM ID)(377-CM) | |||
116-2652 BF | CABLE-ELECTRICAL (18-GA) | |||
B | USE AS REQUIRED | |||
E | ORDER BY THE CENTIMETER | |||
F | NOT SHOWN |
Information:
ELECTRICAL AND STARTING SYSTEM
HARNESS GP
Special Instruction
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar<SUP>®</SUP> Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install an Aftertreatment (Mechanical) Kit on All Caterpillar® Diesel Engines {108D, 108U, 1408, 1907, 1921, 1923, 7553}
Procedure to Install Fluid Property Sensor on All Caterpillar<SUP>®</SUP> and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Procedure to Install Fluid Property Sensor on All Caterpillar® and Non-Caterpillar Diesel Engines {1348, 1403, 1439}
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Installation Procedure For Mobile Exhaust Port Kit On All Select Caterpillar and Non-Caterpillar Diesel Engines {0781, 1408, 1919, 7466}
Installation Procedure on Installing the Oil & Gas Asset IQ<SUP>TM</SUP> System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Installation Procedure on Installing the Oil & Gas Asset IQTM System on All Caterpillar and Non-Caterpillar Diesel, Natural Gas, and Dynamic Gas Blending Engines {1000, 1408, 7620, 7960}
Procedure to Replace Armature of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat<SUP>®</SUP> Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Technical Information Bulletin
Some Injector Wiring Harnesses for 3500 Engines Are Made with Incorrect Braiding {1290, 1408}
Some Injector Wiring Harnesses for 3500 Engines Are Made with Incorrect Braiding {1290, 1408}
Some Injector Wiring Harnesses for 3500 Engines Are Made with Incorrect Braiding {1290, 1408}
Tool Operating Manual
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Reuse And Salvage Guidelines
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Guideline for Visual Inspection and Repair of Foam Wiring Harness {0649, 1408, 1408, 1408, 1408}
Caterpillar Parts SIS Catalog 3512B :
Truck sale:
182,189
Caterpillar 3512B, Marine Propulsion / Auxiliary Engines, Construction
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH
- Marine Propulsion / Auxiliary Engines
ZEPPELIN POWER SYSTEMS GMBH