218-6749 KIT-AIR CONDITIONER INSTL S/N LBA1-UP; SCL1-UP AN ATTACHMENT 268B SKID STEER LOADER

Part No	Qty	Parts name
186-6190 Y	[1]	ACCUMULATOR GP-REFRIGERANT (CHARGED)
218-6405 Y	[1]	AIR CONDITIONER GP
218-6840 Y	[1]	MOTOR GP-GEAR
		-OR-
289-6360 Y	[1]	MOTOR GP-GEAR

218-6833	[1]	COMPRESSOR GP-REFRIGERANT
218-6836	[1]	COUPLING GP-DRIVE
218-6837	[1]	COUPLING
218-6838	[1]	HUB (COMPRESSOR)
276-4063	[1]	HUB (MOTOR)
283-9566	[1]	VALVE GP-SOLENOID (12-VOLT)(12 VDC)

252-0348	[1]	COIL AS
148-8316	[1]	CONNECTOR AS
6V-8647	[1]	CONNECTOR
3J-7354	[1]	SEAL-O-RING
4J-5477	[1]	SEAL-O-RING
148-8315	[2]	CONNECTOR AS
		(EACH INCLUDES)
6V-8642	[1]	CONNECTOR
2M-9780	[1]	SEAL-O-RING
7J-9108	[1]	SEAL-O-RING
218-6250	[2]	FAN AS (10-BLADE)
234-0566	[1]	FITTING AS
3E-4051	[1]	CAP-SEAL (LOW SIDE CHARGE PORT)
3E-4057	[1]	VALVE AS (REFRIGERANT, LOW SIDE)
242-7389	[1]	HARNESS AS-CHASSIS
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
		(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
202-2168	[1]	HARNESS AS-FUEL TANK
9X-3401	[2]	PIN-CONNECTOR (16-GA TO 18-GA)
155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
		(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
102-8802	[1]	KIT-RECEPTACLE (2-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
9X-3402	[2]	SOCKET-CONNECTOR (16-GA TO 18-GA)
221-3879	[1]	HARNESS AS-HEATER & AIR COND
155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
155-2270	[3]	KIT-CONNECTING PLUG (2-PIN)
		(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
100-6674	[2]	SEAL-CONNECTOR
9W-0844	[5]	SOCKET-CONNECTOR (14-GA TO 16-GA)
180-9340	[4]	SOCKET-CONNECTOR (14-GA TO 18-GA)
124-5640	[2]	TERMINAL-SOCKET
2L-8069	[1]	TERMINAL-RING (2-GA TO 10-GA, 3/8-IN SCREW)
119-3662 E		TUBE-HEAT SHRINK (10.85-MM DIA)(13-CM)
218-6876 I	[1]	HOSE AS
233-5666 I	[1]	HOSE AS
218-5685 I	[1]	HOSE AS
218-5686 I	[1]	HOSE AS
233-5814 I	[1]	HOSE AS
252-0358 I	[1]	HOSE AS
218-6060	[1]	SHROUD AS
236-6923	[1]	SWITCH AS-PRESSURE (HIGH, LOW)(REFRIGERANT)
9G-5127	[1]	BREATHER (ATMOSPHERIC)(AIR CONDITIONER COMPRESSOR)

8T-4136 M	[3]	BOLT (M10X1.5X25-MM)
8T-4189 M	[14]	BOLT (M8X1.25X20-MM)
8T-4908 M	[3]	BOLT (M8X1.25X25-MM)
8T-6870 M	[2]	BOLT (M8X1.25X70-MM)
085-8091 M	[2]	BOLT (M10X1.5X55-MM)
9X-6032 M	[2]	BOLT-SOCKET HEAD (M10X1.5X30-MM)
7D-7233	[1]	CLIP (LOOP)
101-8296	[2]	CLIP
116-5763	[3]	CLIP-SPRING
124-2135	[1]	COUPLING-PERMANENT
124-2150	[2]	COUPLING-PERMANENT
124-3548	[1]	FUSE (30-AMPERE)
2D-5248	[1]	GASKET
122-6871 BG		HOSE-HYDRAULIC (104-CM)
233-5590	[1]	HOUSING-SUPPORT
200-6345	[3]	SADDLE-MOUNTING (DUAL SWIVEL)
5C-7261 M	[16]	NUT (M8X1.25-THD)
8T-4133 M	[4]	NUT (M10X1.5-THD)
246-9039	[1]	PLATE-INFORMATION (AIR CONDITIONER REFRIGERANT)
233-1012 M	[1]	SETSCREW-HEX SOCKET (M5X0.8X8-MM)
5P-5924 D		SEAL (0.3-M)
9X-7378	[1]	SEAL-O-RING
9X-7380	[1]	SEAL-O-RING
9X-7381	[3]	SEAL-O-RING
9X-7382	[2]	SEAL-O-RING
9X-7383	[3]	SEAL-O-RING
6B-2882	[4]	SPACER (0.406X0.75X0.312-IN THK)
9C-2741	[2]	SPACER (13.94X17.14X34-MM THK)
9G-7101	[2]	SPACER (11X20X30-MM THK)
3S-2093	[19]	STRAP-CABLE
7K-1181	[2]	STRAP-CABLE
9X-2092 E		TRIM-EDGE (50-CM)
5P-4116	[5]	WASHER-HARD (8.8X20.5X2-MM THK)
8T-4121	[11]	WASHER-HARD (11X21X2.5-MM THK)
8T-4224	[22]	WASHER-HARD (8.8X16X2-MM THK)
B		USE AS REQUIRED
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER
G		ORDER BY THE INCH
I		REFER TO HYDRAULIC INFORMATION SYSTEM
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP39280871

218-6743: KIT-CAB DOOR & MOUNTING

KIT-CAB DOOR & MOUNTING

218-6743 KIT-CAB DOOR & MOUNTING -POLYCARBONATE
S/N LBA1-UP; SCL1-UP
CANNOT BE USED WITH @@@@@218-6744@@@@@
AN ATTACHMENT

i02644477 SEBP3928

For full view, you need register

Parts for your 268B SKID STEER LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
218-6441 Y	[1]	DOOR GP-CAB (POLYCARBONATE)
		-OR-
276-3440 Y	[1]	DOOR GP-CAB (POLYCARBONATE)

221-3877	[1]	HARNESS AS-WINDOW WIPER
9X-3401	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
123-7615	[1]	CONNECTOR (1-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8T-8737	[1]	PLUG-SEAL
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
194-5226	[6]	WIRE AS (16-GA)
		-OR-
194-5227	[6]	WIRE AS (14-GA)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
5W-1987	[2]	TERMINAL-BLADE (12-GA TO 16-GA)
223-0608	[1]	HINGE AS
280-1575	[1]	PLATE AS
223-0591	[1]	PLATE AS
223-0601	[2]	PLATE AS
153-2683	[1]	SPRING AS-GAS (LOCKING)
230-3214	[1]	SPRING AS-GAS (CAB DOOR)
8T-3848	[1]	STRIKER AS-LATCH
6V-4270	[1]	LOCKWASHER
219-9739	[1]	TANK AS-WINDOW WASHER

142-9356	[1]	BLOCK
144-0195 E		HOSE (40-CM)
195-0937 M	[8]	INSERT-THREADED (M8X1.25-THD)
5P-0372	[2]	LOCK PIN
223-0617	[1]	MOUNT
5C-2890 M	[13]	NUT (M6X1-THD)
8T-4133 M	[4]	NUT (M10X1.5-THD)
177-3405	[1]	PIN
095-1325	[1]	PIN-CLEVIS
9X-2041 M	[4]	SCREW-TRUSS HEAD (M10X1.5X20-MM)
9X-2044 M	[3]	SCREW-TRUSS HEAD (M6X1X16-MM)
9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
127-2170 M	[8]	SCREW-TRUSS HEAD (M8X1.25X20-MM)
5P-8309 D		SEAL (0.72-M)
5P-9909 D		SEAL (0.1-M)
125-3518 E		SEAL (77-CM)
5P-5969 D		SEAL (2.2-M)
9C-5344	[1]	SPACER (10.5X20X18-MM THK)
218-0728	[2]	SPRING
3S-2093	[3]	STRAP-CABLE
8T-2444	[2]	STUD-BALL
8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8T-4205	[13]	WASHER-HARD (7.2X14.5X2-MM THK)
8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
8T-4222	[1]	WASHER-PLATED (11X32X2.5-MM THK)
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP39280872

218-6744: KIT-CAB DOOR & MOUNTING

KIT-CAB DOOR & MOUNTING

218-6744 KIT-CAB DOOR & MOUNTING -GLASS
S/N LBA1-UP; SCL1-UP
CANNOT BE USED WITH @@@@@218-6743@@@@@
AN ATTACHMENT

i02513740 SEBP3928

For full view, you need register

Parts for your 268B SKID STEER LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
223-0616 Y	[1]	DOOR GP-CAB (GLASS)

221-3877	[1]	HARNESS AS-WINDOW WIPER
9X-3401	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
		-OR-
126-1767	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
123-7615	[1]	CONNECTOR (1-PIN)
155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
		(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8T-8737	[1]	PLUG-SEAL
102-8805	[1]	KIT-RECEPTACLE (6-PIN)
		(INCLUDES RECEPTACLE AS & WEDGE)
194-5226	[6]	WIRE AS (16-GA)
		-OR-
194-5227	[6]	WIRE AS (14-GA)
125-7875 E		TUBE-HEAT SHRINK (7.44-MM DIA)(5-CM)
5W-1987	[2]	TERMINAL-BLADE (12-GA TO 16-GA)
223-0608	[1]	HINGE AS
223-0591	[1]	PLATE AS
223-0601	[2]	PLATE AS
280-1575	[1]	PLATE AS
153-2683	[1]	SPRING AS-GAS (LOCKING)
230-3214	[1]	SPRING AS-GAS (CAB DOOR)
8T-3848	[1]	STRIKER AS-LATCH
6V-4270	[1]	LOCKWASHER
219-9739	[1]	TANK AS-WINDOW WASHER

142-9356	[1]	BLOCK
144-0195 E		HOSE (40-CM)
195-0937 M	[8]	INSERT-THREADED (M8X1.25-THD)
5P-0372	[2]	LOCK PIN
223-0617	[1]	MOUNT
5C-2890 M	[13]	NUT (M6X1-THD)
8T-4133 M	[4]	NUT (M10X1.5-THD)
177-3405	[1]	PIN
095-1325	[1]	PIN-CLEVIS
9X-2041 M	[4]	SCREW-TRUSS HEAD (M10X1.5X20-MM)
9X-2044 M	[3]	SCREW-TRUSS HEAD (M6X1X16-MM)
9X-2045 M	[4]	SCREW-TRUSS HEAD (M6X1X20-MM)
127-2170 M	[8]	SCREW-TRUSS HEAD (M8X1.25X20-MM)
5P-8309 D		SEAL (0.72-M)
5P-9909 D		SEAL (0.1-M)
125-3518 E		SEAL (77-CM)
5P-5969 D		SEAL (2.2-M)
9C-5344	[1]	SPACER (10.5X20X18-MM THK)
218-0728	[2]	SPRING
3S-2093	[3]	STRAP-CABLE
8T-2444	[2]	STUD-BALL
8T-4121	[4]	WASHER-HARD (11X21X2.5-MM THK)
8T-4205	[13]	WASHER-HARD (7.2X14.5X2-MM THK)
8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
8T-4222	[1]	WASHER-PLATED (11X32X2.5-MM THK)
D		ORDER BY THE METER
E		ORDER BY THE CENTIMETER
M		METRIC PART
Y		SEPARATE ILLUSTRATION

#SEBP39280873

218-6748: KIT-CAB SEAL

KIT-CAB SEAL

218-6748 KIT-CAB SEAL -DEBRIS BARRIER
S/N LBA1-UP; SCL1-UP
AN ATTACHMENT

i02513699 SEBP3928

For full view, you need register

Parts for your 268B SKID STEER LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
7X-2537 M	[2]	BOLT (M8X1.25X35-MM)
189-4523	[2]	BOSS
218-6036	[1]	BRACKET AS (LH)
218-6037	[1]	BRACKET AS (RH)
187-3212	[1]	PLATE
187-3211	[1]	PLATE AS
8T-3612 M	[2]	NUT-WELD (M8X1.25-THD)
287-6603	[2]	PLUG-BUTTON
3T-7856	[2]	PLUG-BUTTON
288-5767	[8]	PLUG-BUTTON
124-3243 E		SEAL (98-CM)
284-3743	[2]	SEAL-RUBBER
284-3744	[1]	SEAL-RUBBER
8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
E		ORDER BY THE CENTIMETER
M		METRIC PART

#SEBP39280874

234-0774: LEVER GP-GOVERNOR

LEVER GP-GOVERNOR

234-0774 LEVER GP-GOVERNOR
S/N LBA1-UP; SCL1-UP
PART OF 218-5565 PEDAL GP-GOVERNOR

i01910964 SEBP3928

For full view, you need register

Parts for your 268B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	192-2663	[1]	LEVER GP-HAND CONTROL (GOVERNOR)
	8T-4971 M	[1]	BOLT (M6X1X30-MM)
	129-3178 M	[1]	LOCKNUT (M6X1-THD)
2.	234-0732	[1]	CABLE AS
3.	8T-4742	[1]	END-YOKE ROD
4.	8T-4744	[1]	PIN AS-SPRING
5.	5C-2890 M	[1]	NUT (M6X1-THD)
6.	8T-4971 M	[1]	BOLT (M6X1X30-MM)
7.	129-3178 M	[1]	LOCKNUT (M6X1-THD)
	M		METRIC PART

#SEBP39280875

218-6356: LINER GP-CAB

LINER GP-CAB

218-6356 LINER GP-CAB
S/N LBA1-UP; SCL1-UP
PART OF 218-6350 CAB AR-ENCLOSED ROPS

i01934867 SEBP3928

For full view, you need register

Parts for your 268B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9X-2092 E		TRIM-EDGE (113-CM)
2.	218-6357	[1]	INSULATION
3.	218-6359	[1]	LINER
4.	218-6436	[1]	INSULATION
5.	292-3114	[2]	SEAL
	E		ORDER BY THE CENTIMETER

#SEBP39280876

142-9311: LINER-CAB

LINER-CAB

142-9311 LINER-CAB -GRAY
S/N LBA1-UP; SCL1-UP
AN ATTACHMENT

i01070550 SEBP3928

For full view, you need register

Parts for your 268B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
			(NO SERVICED PARTS)

#SEBP39280877

218-5680: LINES GP-AIR CONDITIONER

LINES GP-AIR CONDITIONER

218-5680 LINES GP-AIR CONDITIONER
S/N LBA1-825; SCL1-814
PART OF 233-5650 AIR CONDITIONER AR
AN ATTACHMENT

i01938545 SEBP3928

2185680 LINES GP-AIR CONDITIONER Parts scheme

For full view, you need register

Parts for your 268B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	200-6345	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
3.	218-5685 I	[1]	HOSE AS
4.	218-5686 I	[1]	HOSE AS
5.	218-5687 I	[1]	HOSE AS
6.	236-6923	[1]	SWITCH AS-PRESSURE (HIGH, LOW)(AIR CONDITIONER)
7.	085-8091 M	[2]	BOLT (M10X1.5X55-MM)
8.	101-8296	[2]	CLIP
9.	186-6190 Y	[1]	ACCUMULATOR GP-REFRIGERANT (CHARGED)
10.	233-5814 I	[1]	HOSE AS
11.	234-0566	[1]	FITTING AS
	3E-4051	[1]	CAP-SEAL (LOW SIDE CHARGE PORT)
	3E-4057	[1]	VALVE AS (REFRIGERANT, LOW SIDE)(LOW SIDE)
12.	246-9039	[1]	PLATE-INFORMATION (AIR CONDITIONER REFRIGERANT)
13.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
14.	9C-2741	[2]	SPACER (13.94X17.14X34-MM THK)
15.	9X-7378	[1]	SEAL-O-RING
16.	9X-7380	[1]	SEAL-O-RING
17.	9X-7381	[3]	SEAL-O-RING
18.	9X-7382	[2]	SEAL-O-RING
19.	9X-7383	[3]	SEAL-O-RING
20.	5P-5924 D		SEAL (0.15-M EACH)
	D		ORDER BY THE METER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP39280878

218-5680: LINES GP-AIR CONDITIONER

LINES GP-AIR CONDITIONER

218-5680 LINES GP-AIR CONDITIONER
S/N LBA826-UP; SCL815-UP
PART OF 233-5650 AIR CONDITIONER AR
AN ATTACHMENT

i02299112 SEBP3928

For full view, you need register

Parts for your 268B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[3]	STRAP-CABLE
2.	200-6345	[1]	SADDLE-MOUNTING (DUAL SWIVEL)
3.	218-5685 I	[1]	HOSE AS
4.	218-5686 I	[1]	HOSE AS
5.	252-0358 CI	[1]	HOSE AS
6.	236-6923	[1]	SWITCH AS-PRESSURE (HIGH, LOW)(AIR CONDITIONER)
7.	085-8091 M	[2]	BOLT (M10X1.5X55-MM)
8.	101-8296	[2]	CLIP
9.	186-6190 Y	[1]	ACCUMULATOR GP-REFRIGERANT (CHARGED)
10.	233-5814 I	[1]	HOSE AS
11.	234-0566	[1]	FITTING AS
	3E-4051	[1]	CAP-SEAL (LOW SIDE CHARGE PORT)
	3E-4057	[1]	VALVE AS (REFRIGERANT, LOW SIDE)(LOW SIDE)
12.	246-9039	[1]	PLATE-INFORMATION (AIR CONDITIONER REFRIGERANT)
13.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
14.	9C-2741	[2]	SPACER (13.94X17.14X34-MM THK)
15.	9X-7378	[1]	SEAL-O-RING
16.	9X-7380	[1]	SEAL-O-RING
17.	9X-7381	[3]	SEAL-O-RING
18.	9X-7382	[2]	SEAL-O-RING
19.	9X-7383	[3]	SEAL-O-RING
20.	5P-5924 D		SEAL (0.15M)
	C		CHANGE FROM PREVIOUS TYPE
	D		ORDER BY THE METER
	I		REFER TO HYDRAULIC INFORMATION SYSTEM
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP39280879

218-5619: LINES GP-HEATER

LINES GP-HEATER

218-5619 LINES GP-HEATER
S/N LBA1-UP; SCL1-UP
PART OF 233-5650 AIR CONDITIONER AR, 218-6951 HEATER AR-CAB
Type 1
AN ATTACHMENT

i01961124 SEBP3928

For full view, you need register

Parts for your 268B SKID STEER LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8T-0154	[4]	CLAMP-HOSE
2.	004-6810	[1]	ELBOW
3.	218-6645	[1]	ELBOW
4.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
5.	6D-1641	[2]	CLIP (LOOP)
6.	6V-2235	[1]	CLIP
7.	8T-4121	[5]	WASHER-HARD (11X21X2.5-MM THK)
8.	8T-4133 M	[2]	NUT (M10X1.5-THD)
9.	8T-4195 M	[1]	BOLT (M10X1.5X30-MM)
10.	8T-4908 M	[1]	BOLT (M8X1.25X25-MM)
11.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
12.	9X-8250	[4]	CLIP (LOOP)
13.	136-1953 E		HOSE
			(FOR MODELS 236, 246, & 248 CUT TO 160-CM)
			(FOR MODELS 252, 262, 267, 268, 277, & 287 CUT TO 170-CM)
14.	136-1953 E		HOSE
			(FOR MODELS 236, 246, & 248 CUT TO 212-CM)
			(FOR MODELS 252, 262, 267, 268, 277, & 287 CUT TO 217-CM)
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

Information:

Caterpillar Parts SIS Catalog 268B :

218-6747 KIT-AIR COND & HEATER INSTL

218-6851 INSTALLATION GP-COVER & LINES

231-8122 HOUSING AS-SIDE

230-3742 HORN GP-ELECTRIC

245-6811 HOLDER-CUP

218-6746 HEATER GP-CAB

218-6393 HEATER GP-CAB

218-6743 KIT-CAB DOOR & MOUNTING

218-6744 KIT-CAB DOOR & MOUNTING

218-6748 KIT-CAB SEAL

234-0774 LEVER GP-GOVERNOR

218-6356 LINER GP-CAB

142-9311 LINER-CAB

218-5680 LINES GP-AIR CONDITIONER

Truck sale:

CATERPILLAR 268B 2006
- SKID STEER LOADERS
MICHIGAN CAT
US (Mid, North), Canada, ON West: John Kinney; US (NE, SE, SW), Canada QU East, AUS: Bill Dowd;

CATERPILLAR 268B 2006
- SKID STEER LOADERS
FABICK CAT

CATERPILLAR 268B 2007
- SKID STEER LOADERS
ALTORFER INC.
2600 6th Street SW - Cedar Rapids - Io

CATERPILLAR 268B 2007
- SKID STEER LOADERS
GREGORY POOLE
4807 Beryl Road P. O. Box 469 (27602) - Raleigh

USD $17,900

2005 CAT 268B

Ziegler Cat
Marshall, Minnesota