OPERATOR STATION
SEAT GPPANEL GP
ELECTRICAL AND STARTING SYSTEM
SWITCH GPOPERATOR STATION
MONITOR GPROPS/FOPS GP
SEAT GP
PANEL GP
PEDAL GP
OPERATOR STATION
SEAT GP
#SEBP39290540
108-4582: HOUSING GP-SEAT SUSPENSION
108-4582 HOUSING GP-SEAT SUSPENSION
S/N DSC1-UP
PART OF 108-4082 SUSPENSION GP-SEAT
S/N DSC1-UP
PART OF 108-4082 SUSPENSION GP-SEAT
For full view, you need register
Parts for your 572R II PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 161-5967 | [1] | SHAFT | |
| 2. | 8Y-6066 | [1] | SPRING | |
| 3. | 8Y-6069 | [1] | ADJUSTER AS | |
| 4. | 8Y-6068 | [1] | NUT (3/8X16-THD) | |
| 5. | 8Y-6029 | [1] | HOUSING-SEAT SUSPENSION | |
| 6. | 8Y-6047 | [2] | PIN | |
| 7. | 2M-7819 | [4] | RING-RETAINING | |
| 8. | 8Y-6041 | [1] | ARM AS | |
| 9. | 8Y-6045 | [1] | CAM | |
| 10. | 8Y-6046 | [1] | PIN | |
| 11. | 8S-7803 | [4] | RING-RETAINING | |
| 12. | 131-4242 | [1] | BOLT (3/8-16X5.18-IN) | |
| 13. | 7M-7219 | [1] | BEARING-THRUST | |
| 14. | 3D-2975 J | [2] | RING-RETAINING | |
| 15. | 095-0878 | [1] | PIN-SPRING | |
| 16. | 9X-8918 | [3] | SCREW-FLAT HEAD (8-32X0.5-IN) | |
| 17. | 5P-8445 | [4] | RING-RETAINING | |
| 18. | 4B-5059 | [6] | WASHER (15X29.5X2.5-MM THK) | |
| 19. | 8Y-6060 | [2] | ROLLER | |
| 20. | 1Y-7927 | [1] | PIN | |
| 21. | 7V-5191 | [2] | SPACER (28X10X7.1-MM THK) | |
| 22. | 5D-4822 | [2] | RING-RETAINING | |
| 23. | 8Y-6062 | [1] | LINK-ACTUATOR | |
| 24. | 8Y-6063 | [1] | LINK-ACTUATOR | |
| 25. | 5V-0770 | [2] | BOLT-CARRIAGE (1/4-20X0.74-IN) | |
| 26. | 8Y-6064 | [2] | ROLLER-SLIDER | |
| 27. | 131-5167 | [1] | KNOB AS-ADJUSTMENT | |
| 28. | 8Y-6067 | [1] | SPACER (10.54-MM THK) | |
| 29. | 8L-8413 L | [2] | STRAP-CABLE (WHITE) | |
| 30. | 4N-2927 | [2] | RACE-THRUST BEARING | |
| 31. | 2D-6235 | [2] | LOCKNUT (1/4-20-THD) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 100-5179 | [1] | KIT-BUMPER (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES BUMPERS) | ||||
| 8Y-5945 | [1] | KIT-SUSPENSION KNOB (HEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES KNOBS) | ||||
| 8Y-6860 | [1] | KIT-SPRING (HEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES BUSHINGS, SPRINGS, RODS & SPACERS) | ||||
| 8Y-6859 J | [1] | KIT-SPRING (SUSPENSION SEAT) | ||
| (ALSO INCLUDES SPRINGS & BUSHINGS) | ||||
| 108-4086 | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| (INCLUDES PIN & FOLLOWER) | ||||
| 100-3224 L | [1] | KIT-INDICATOR (WEIGHT ADJUSTMENT)(SUSPENSION SEAT) | ||
| (INCLUDES TAPE, GUIDE & STRAPS) | ||||
| 108-4087 | [1] | KIT-FOLLOWER (SUSPENSION SEAT) | ||
| (INCLUDES FOLLOWER & PIN) | ||||
| 108-4103 | [1] | KIT-BEARING (SUSPENSION SEAT) | ||
| (INCLUDES ROLLER ASSEMBLIES) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
#SEBP39290541
296-4014: INSTRUMENT GP
For full view, you need register
Parts for your 572R II PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [16] | STRAP-CABLE | |
| 2. | 083-9527 | [1] | SPACER (13X20X1.5-MM THK) | |
| 3. | 110-6109 | [1] | KNOB-CONTROL (LIGHT SWITCH) | |
| 4. | 116-6203 | [1] | RESISTOR AS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 122-7127 | [6] | NUT-SPECIAL (NYLON) | |
| 6. | 123-0304 | [1] | INDICATOR AS (CHARGING LAMP) | |
| 115-1748 | [1] | LAMP (24-VOLT, 3-WATT) | ||
| 123-0306 | [1] | SOCKET AS (LAMP) | ||
| 7. | 123-9294 | [4] | LAMP (24-VOLT) | |
| 8. | 133-9405 | [1] | SWITCH AS-PUSH BUTTON (AUTOMATIC KICKDOWN) | |
| 8A. | 133-9405 | [1] | SWITCH AS-PUSH BUTTON (BIDIRECTIONAL MODE) | |
| 8B. | 133-9405 | [1] | SWITCH AS-PUSH BUTTON (OPERATOR SELECT) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 3K-0835 | [1] | NUT (5/8-24-THD) | ||
| 6F-0253 | [1] | LOCKWASHER | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9. | 142-8858 J | [1] | SWITCH AS-START (KEY)(IGNITION) | |
| 10. | 157-2741 | [1] | GUARD-VANDALISM | |
| 11. | 159-4712 | [1] | FILM-IDENTIFICATION (INSTRUMENT PANEL)(UPPER) | |
| 12. | 159-9257 | [1] | PANEL-DASH (LIGHT) | |
| 13. | 164-0847 | [1] | CABLE | |
| 14. | 164-9929 | [1] | FILM-IDENTIFICATION (MANUAL OPERATION LOCK) | |
| 15. | 166-6928 Y | [1] | MODULE GP-QUAD GAUGE | |
| 16. | 168-0369 Y | [1] | MODULE GP-DISPLAY | |
| 17. | 175-1349 | [1] | PLATE | |
| 18. | 175-3950 | [1] | SWITCH AS-ROTARY (LIGHTS) | |
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 19. | 178-3003 | [1] | COVER | |
| 20. | 185-3533 | [6] | CLIP | |
| 21. | 186-5097 | [1] | ROD | |
| 22. | 314-3124 | [1] | LOCK GP | |
| 226-0293 | [1] | LOCK AS | ||
| 300-1643 | [1] | CAM | ||
| 23. | 187-7719 M | [4] | SCREW-HEX FLANGE (M5X2.24X14-MM) | |
| 24. | 194-1466 | [1] | CLIP | |
| 25. | 198-9706 M | [12] | SCREW-TRUSS HEAD (M5X0.8X16-MM) | |
| 26. | 213-7315 M | [6] | SCREW-TRUSS HEAD (M4X0.7X25-MM) | |
| 27. | 228-6089 | [1] | PLUG (ROCKER SWITCH) | |
| 28. | 252-4501 | [1] | CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| 29. | 265-7315 | [1] | PANEL AS-INSTRUMENT | |
| 30. | 294-4631 | [1] | HARNESS AS-PANEL | |
| 155-2272 | [4] | PLUG AS-CONNECTOR (4-PIN) | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 155-2274 | [4] | KIT-CONNECTING PLUG (6-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2265 | [2] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2260 | [6] | KIT-CONNECTING PLUG (3-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE, & INTERFACE SEAL) | ||||
| 102-8804 | [2] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8805 | [2] | KIT-RECEPTACLE (6-PIN) | ||
| 102-8806 | [2] | KIT-RECEPTACLE (8-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 214-4208 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 3T-3158 | [4] | SOCKET-LAMP | ||
| 3T-3159 | [4] | SPRING | ||
| 3T-3278 | [4] | BOOT | ||
| 6D-4161 | [4] | CONTACT | ||
| 31. | 294-5120 | [1] | PLUG AS-CODE (MONITOR) | |
| 32. | 130-5300 | [3] | CLIP | |
| 33. | 132-5789 | [1] | CLIP (LADDER) | |
| 34. | 198-9707 M | [4] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 35. | 204-6101 | [12] | WASHER-HARD (5.3X10X1-MM THK) | |
| 36. | 204-6102 | [6] | WASHER-HARD (4.45X9.52X1-MM THK) | |
| 37. | 268-1825 | [1] | FILM-IDENTIFICATION (INSTRUMENT PANEL) | |
| 38. | 8T-8908 | [2] | BOLT (1/4-20X1-IN) | |
| 39. | 4P-7581 | [2] | CLIP (LADDER) | |
| 40. | 4P-8134 | [1] | CLIP (LADDER) | |
| 41. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 42. | 8T-0337 M | [1] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 43. | 8T-2659 M | [1] | LOCKNUT (M4X0.7-THD) | |
| 44. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 45. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 46. | 8T-4970 EM | [10] | BOLT (M6X1X14-MM) | |
| E | ORDER BY THE CENTIMETER | |||
| J | REQUIRES 5P8500 KEY | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39290542
109-2377: LANYARD AS
109-2377 LANYARD AS -BATTERY DISCONNECT
S/N DSC1-699
PART OF 255-8781 COLD WEATHER AR
AN ATTACHMENT
S/N DSC1-699
PART OF 255-8781 COLD WEATHER AR
AN ATTACHMENT
For full view, you need register
Parts for your 572R II PIPELAYER:
CATERPILLAR SIS#SEBP39290543
168-0369: MODULE GP-DISPLAY
168-0369 MODULE GP-DISPLAY
S/N DSC1-UP
DISPLAYS THE GEAR, RPM & WARNING INDICATORS
PART OF 296-4014 INSTRUMENT GP, 198-9174 PANEL GP-INSTRUMENT
S/N DSC1-UP
DISPLAYS THE GEAR, RPM & WARNING INDICATORS
PART OF 296-4014 INSTRUMENT GP, 198-9174 PANEL GP-INSTRUMENT
For full view, you need register
Parts for your 572R II PIPELAYER:
CATERPILLAR SIS#SEBP39290544
166-6928: MODULE GP-QUAD GAUGE
166-6928 MODULE GP-QUAD GAUGE
S/N DSC1-UP
PART OF 296-4014 INSTRUMENT GP, 198-9174 PANEL GP-INSTRUMENT
S/N DSC1-UP
PART OF 296-4014 INSTRUMENT GP, 198-9174 PANEL GP-INSTRUMENT
For full view, you need register
Parts for your 572R II PIPELAYER:
CATERPILLAR SIS#SEBP39290545
163-8744: MOUNTING GP-ROPS
163-8744 MOUNTING GP-ROPS
S/N DSC1-UP
PART OF 218-0311, 285-5770, 439-9108 CHASSIS AR
S/N DSC1-UP
PART OF 218-0311, 285-5770, 439-9108 CHASSIS AR
For full view, you need register
Parts for your 572R II PIPELAYER:
CATERPILLAR SIS#SEBP39290546
108-8421: PAN GP-BACKREST
For full view, you need register
Parts for your 572R II PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9M-5733 | [2] | RIVET-POP | |
| 2. | 8Y-6006 | [1] | LID AS | |
| 3. | 8Y-6010 | [1] | LANYARD | |
| 4. | 4S-8287 | [8] | RIVET-POP | |
| 5. | 8Y-5972 | [1] | LATCH | |
| 6. | 108-8423 | [1] | SHAFT AS-LUMBAR | |
| 7. | 3E-4336 | [1] | STUD-BALL | |
| 8. | 3E-4335 | [1] | CLIP | |
| 9. | 2F-7306 | [1] | SCREW-MACHINE (6-32X0.25-IN) | |
| 10. | 8F-1462 | [1] | WASHER-PLATED | |
| 11. | 3E-6575 E | SEAL (76-CM) | ||
| 12. | 108-8424 | [1] | PAN-LUMBAR | |
| 13. | 8Y-5903 | [2] | CAM | |
| 14. | 3E-4362 | [2] | PIN-SPRING | |
| E | ORDER BY THE CENTIMETER | |||
#SEBP39290547
8Y-5992: PAN GP-SEAT
For full view, you need register
Parts for your 572R II PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 8Y-5892 | [1] | PAN AS-SEAT (BOTTOM) | |
| 2. | 3K-4897 JL | [4] | PIN-SPRING | |
| 3. | 9M-5733 N | [1] | RIVET-POP | |
| 4. | 6V-2456 N | [2] | RING-RETAINING | |
| AVAILABLE REPAIR KIT(S): | ||||
| 8Y-5995 J | [1] | KIT-SEAT TILT | ||
| (INCLUDES ROD AS, BUSHING, SPRING & LOCK PINS) | ||||
| 8Y-5998 L | [1] | KIT-BACK TILT | ||
| (INCLUDES BUSHINGS, SPRING & ROD AS) | ||||
| 8Y-5999 N | [1] | KIT-ADJUSTER | ||
| (INCLUDES ADJUSTER AS, CABLE AS, BRACKET & PIN) | ||||
| J | KIT MARKED J SERVICES PART(S) MARKED J | |||
| L | KIT MARKED L SERVICES PART(S) MARKED L | |||
| N | KIT MARKED N SERVICES PART(S) MARKED N | |||
#SEBP39290548
198-9174: PANEL GP-INSTRUMENT
For full view, you need register
Parts for your 572R II PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3S-2093 | [16] | STRAP-CABLE | |
| 2. | 083-9527 | [1] | SPACER (13X20X1.5-MM THK) | |
| 3. | 110-6109 | [1] | KNOB-CONTROL (LIGHTS) | |
| 4. | 116-6203 | [1] | RESISTOR AS | |
| 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 5. | 122-7127 | [6] | NUT-SPECIAL (NYLON) | |
| 6. | 123-0304 | [1] | INDICATOR AS (ACTION LIGHT) | |
| 115-1748 | [1] | LAMP (24-VOLT, 3-WATT)(ACTION LIGHT) | ||
| 123-0306 | [1] | SOCKET AS | ||
| 7. | 123-9294 | [4] | LAMP (24-VOLT)(PANEL) | |
| 8. | 133-9405 | [1] | SWITCH AS-PUSH BUTTON (DISPLAY MODE, OPERATOR SELECT) | |
| 8A. | 133-9405 | [1] | SWITCH AS-PUSH BUTTON (AUTO KICK-DOWN) | |
| 8B. | 133-9405 | [1] | SWITCH AS-PUSH BUTTON (BI-DIRECTIONAL MODE) | |
| (EACH SWITCH AS INCLUDES) | ||||
| 3K-0835 | [1] | NUT (5/8-24-THD) | ||
| 6F-0253 | [1] | LOCKWASHER | ||
| 186-3735 | [3] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 102-8803 | [1] | KIT-RECEPTACLE (3-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9. | 142-8858 J | [1] | SWITCH AS-START (KEY) | |
| 167-1530 | [1] | NUT (1-32-THD) | ||
| 10. | 154-7443 Y | [1] | CONTROL GP-UNPRGMED MONITOR (CATERPILLAR MONITORING SYSTEM) | |
| 11. | 157-2741 | [1] | GUARD-VANDALISM | |
| 12. | 159-4712 | [1] | FILM-IDENTIFICATION (INSTRUMENT PANEL)(UPPER) | |
| 13. | 159-9257 | [1] | PANEL-DASH (LIGHT) | |
| 14. | 164-0847 | [1] | CABLE | |
| 15. | 164-9929 | [1] | FILM-IDENTIFICATION (MANUAL OPERATION LOCK) | |
| 16. | 166-6928 Y | [1] | MODULE GP-QUAD GAUGE | |
| 17. | 168-0369 Y | [1] | MODULE GP-DISPLAY | |
| 18. | 175-1349 | [1] | PLATE | |
| 19. | 175-3950 | [1] | SWITCH AS-ROTARY (LIGHTS) | |
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 9W-0852 | [7] | PIN-CONNECTOR (14-GA TO 16-GA) | ||
| 20. | 178-3003 | [1] | COVER | |
| 21. | 185-3533 | [6] | CLIP | |
| 22. | 186-5097 | [1] | ROD | |
| 23. | 314-3124 | [1] | LOCK GP | |
| 226-0293 | [1] | LOCK AS | ||
| 300-1643 | [1] | CAM | ||
| 24. | 187-7719 M | [4] | SCREW-HEX FLANGE (M5X2.24X14-MM) | |
| 25. | 194-1466 | [1] | CLIP | |
| 26. | 213-7315 M | [6] | SCREW-TRUSS HEAD (M4X0.7X25-MM) | |
| 27. | 228-6089 | [1] | PLUG (ROCKER SWITCH) | |
| 28. | 265-7315 | [1] | PANEL AS-INSTRUMENT | |
| 29. | 267-1600 | [1] | HARNESS AS-PANEL | |
| 102-8804 | [3] | KIT-RECEPTACLE (4-PIN) | ||
| 102-8806 | [1] | KIT-RECEPTACLE (8-PIN) | ||
| 102-8805 | [1] | KIT-RECEPTACLE (6-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 3T-3158 | [4] | SOCKET-LAMP | ||
| 3T-3159 | [4] | SPRING | ||
| 3T-3278 | [4] | BOOT | ||
| 6D-4161 | [4] | CONTACT | ||
| 155-2260 | [5] | KIT-CONNECTING PLUG (3-PIN) | ||
| 155-2265 | [1] | KIT-CONNECTING PLUG (8-PIN) | ||
| 155-2270 | [2] | KIT-CONNECTING PLUG (2-PIN) | ||
| 155-2274 | [4] | KIT-CONNECTING PLUG (6-PIN) | ||
| (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL) | ||||
| 155-2272 | [5] | PLUG AS-CONNECTOR (4-PIN) | ||
| 8T-9834 | [1] | PLUG AS-CONNECTOR (40-PIN) | ||
| 103-0213 | [1] | RECEPTACLE AS-CONNECTOR (70-PIN) | ||
| 30. | 130-5300 | [3] | CLIP | |
| 31. | 132-5789 | [1] | CLIP (LADDER) | |
| 32. | 198-9706 M | [12] | SCREW-TRUSS HEAD (M5X0.8X16-MM) | |
| 33. | 198-9707 M | [4] | SCREW-TRUSS HEAD (M6X1X35-MM) | |
| 34. | 204-6101 | [12] | WASHER-HARD (5.3X10X1-MM THK) | |
| 35. | 204-6102 | [6] | WASHER-HARD (4.45X9.52X1-MM THK) | |
| 36. | 268-3259 | [1] | FILM-IDENTIFICATION (INSTRUMENT PANEL)(LOWER) | |
| 37. | 8T-8908 | [2] | BOLT (1/4-20X1-IN) | |
| 38. | 4P-7581 | [2] | CLIP (LADDER) | |
| 39. | 4P-8134 | [1] | CLIP (LADDER) | |
| 40. | 5P-4115 | [2] | WASHER-HARD (7.2X19X2-MM THK) | |
| 41. | 8T-0337 M | [1] | SCREW-MACHINE (M4X0.7X12-MM) | |
| 42. | 8T-2659 M | [1] | LOCKNUT (M4X0.7-THD) | |
| 43. | 8T-4138 M | [1] | BOLT (M6X1X20-MM) | |
| 44. | 8T-4205 | [12] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 45. | 8T-4970 M | [10] | BOLT (M6X1X14-MM) | |
| J | REQUIRES CORPORATE KEY | |||
| M | METRIC PART | |||
| R | REMANUFACTURED PART MAY BE AVAILABLE | |||
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39290549
158-8079: PEDAL GP-GOVERNOR & BRAKE
158-8079 PEDAL GP-GOVERNOR & BRAKE
S/N DSC1-301
PART OF 172-5262 CONTROL & MTG GP-PEDAL
S/N DSC1-301
PART OF 172-5262 CONTROL & MTG GP-PEDAL
For full view, you need register
Parts for your 572R II PIPELAYER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 1B-8706 | [1] | KEY-WOODRUFF | |
| 2. | 1B-8714 | [1] | KEY-WOODRUFF | |
| 3. | 7P-4190 | [4] | BEARING-ROLLER | |
| 4. | 9M-5731 | [2] | RIVET-POP | |
| 5. | 9X-6615 M | [4] | BOLT (M5X0.8X30-MM) | |
| 6. | 194-7034 | [1] | SPRING | |
| 7. | 105-3482 M | [6] | BOLT-SOCKET HEAD (M8X1.25X16-MM) | |
| 8. | 110-8379 | [1] | PEDAL (BRAKE)(SERVICE) | |
| 9. | 111-3780 | [1] | SPRING | |
| 10. | 111-3781 M | [2] | BOLT-ANCHOR (M10X1.5X33-MM) | |
| 11. | 132-7077 | [1] | SWITCH AS-LIMIT (SERVICE BRAKE PEDAL) | |
| 6V-8376 | [3] | SCREW-MACHINE (8-32X0.25-IN) | ||
| 9B-7233 | [3] | LOCKWASHER | ||
| 12. | 145-3405 | [2] | SPACER (10.3X16.7X8-MM THK) | |
| 13. | 214-4863 Y | [1] | SENSOR GP-POSITION (ROTARY)(SERVICE BRAKE PEDAL) | |
| 14. | 160-1431 | [1] | SHAFT | |
| 15. | 160-1432 | [1] | SHAFT | |
| 16. | 160-1433 | [1] | LEVER | |
| 17. | 160-1434 | [1] | LEVER | |
| 18. | 160-1435 | [1] | HOUSING | |
| 19. | 160-2443 Y | [1] | SENSOR GP-POSITION (ROTARY)(DECELERATOR PEDAL) | |
| 20. | 164-9541 | [1] | HARNESS AS-SWITCH (SERVICE BRAKE) | |
| 102-8804 | [1] | KIT-RECEPTACLE (4-PIN) | ||
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 21. | 165-6779 | [1] | GASKET | |
| 22. | 165-9100 | [1] | LINK | |
| 23. | 215-9801 | [1] | BRACKET AS | |
| 24. | 165-9102 | [1] | PLATE | |
| 25. | 165-9103 | [1] | SPRING | |
| 26. | 165-9104 | [1] | SPACER (6.5X9.5X10-MM THK) | |
| 27. | 184-8060 | [1] | PEDAL (DECELERATOR) | |
| 28. | 186-4998 | [1] | PAD AS-FOOT | |
| 29. | 096-5962 | [2] | WASHER-HARD (3.4X7X0.8-MM THK) | |
| 30. | 106-5472 M | [1] | SETSCREW-HEX SOCKET (M5X0.8X20-MM) | |
| 31. | 111-9251 | [4] | WASHER-HARD (20X35X1.6-MM THK) | |
| 32. | 1B-2578 | [1] | NUT (3/8-16-THD) | |
| 33. | 2J-6356 | [4] | RING-RETAINING | |
| 34. | 4B-3609 | [1] | SETSCREW-SQUARE HEAD (3/8-16X1.5-IN) | |
| 35. | 6V-0894 | [2] | SEAL-O-RING | |
| 36. | 6V-7357 M | [1] | BOLT (M6X1X25-MM) | |
| 37. | 6V-7744 M | [2] | LOCKNUT (M10X1.5-THD) | |
| 38. | 7X-7729 | [2] | WASHER (11X25X3-MM THK) | |
| 39. | 8F-7702 | [2] | SEAL-LIP TYPE | |
| 40. | 8T-4121 | [4] | WASHER-HARD (11X21X2.5-MM THK) | |
| 41. | 8T-4136 M | [2] | BOLT (M10X1.5X25-MM) | |
| 42. | 8T-4186 M | [2] | BOLT (M10X1.5X40-MM) | |
| 43. | 8T-4195 M | [2] | BOLT (M10X1.5X30-MM) | |
| 44. | 8T-4205 | [2] | WASHER-HARD (7.2X14.5X2-MM THK) | |
| 45. | 8T-4970 M | [2] | BOLT (M6X1X14-MM) | |
| 46. | 9X-6281 | [2] | SCREW-MACHINE (4-40X1-IN) | |
| 47. | 9X-8256 | [2] | WASHER (6.6X12X2-MM THK) | |
| 48. | 205-7331 | [1] | SPACER (20.32X28.01X0.41-MM THK) | |
| M | METRIC PART | |||
| Y | SEPARATE ILLUSTRATION | |||
