236-7476 WIRING GP-CAB S/N XJA1-UP; PAN1-UP PART OF 235-0786, 235-0787 CAB GP ALSO AN ATTACHMENT M325C MH

ELECTRICAL AND STARTING SYSTEM

WIRING GP

0. 236-7476 WIRING GP-
1. 236-1449 WIRING GP-
2. 236-1450 WIRING GP-
3. 236-1451 WIRING GP-
4. 190-5038 WIRING GP-
5. 228-5786 WIRING GP-
6. 235-6091 WIRING GP-
7. 224-5906 WIRING GP-
8. 238-8966 WIRING GP-
9. 241-8749 WIRING GP-
0. INFORMATION

WHEELED EXCAVATOR M325C MH WHEELED EXCAVATOR PAN
M325C Material Handler PAN00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3932 M325C MH PAN (2004)

ELECTRICAL AND STARTING SYSTEM

WIRING GP

245-2075 WIRING GP-BOOM FLOAT

221-9037 WIRING GP-CAB

236-7476 WIRING GP-CAB

236-1449 WIRING GP-CAB RISER

236-1450 WIRING GP-CAB RISER

236-1451 WIRING GP-CONSOLE

#SEBP39320280

236-7476: WIRING GP-CAB

WIRING GP-CAB

236-7476 WIRING GP-CAB
S/N XJA1-UP; PAN1-UP
PART OF 235-0786, 235-0787 CAB GP
ALSO AN ATTACHMENT

i01977735 SEBP3932

For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	8C-6354	[1]	CAP-RECEPTACLE (ET CONNECTOR)
2.	109-2353	[8]	HOUSING
3.	109-2354	[6]	HOUSING
4.	109-2356	[7]	PLUG
5.	132-1829 Y	[1]	ALARM GP (24-VOLT)
6.	167-3593	[1]	STRAP
7.	176-2002	[1]	CAP
8.	190-8664	[1]	SWITCH GP-LIMIT (WINDOW LOWER UNIT)
	7Y-3950	[2]	TERMINAL-BLADE (14-GA TO 20-GA)
	7Y-3953	[1]	CONNECTOR-RECEPTACLE
9.	193-9057	[1]	SWITCH AS-ROCKER (HEADLIGHT)
10.	193-9062	[1]	SWITCH AS-ROCKER (HYDRAULIC CAB RISER)
11.	193-9063	[1]	SWITCH AS-ROCKER (LEFT STABILIZER)(FRONT)
12.	193-9064	[1]	SWITCH AS-ROCKER (RIGHT STABILIZER)(FRONT)
13.	193-9063	[1]	SWITCH AS-ROCKER (LEFT STABILIZER)(REAR)
14.	193-9064	[1]	SWITCH AS-ROCKER (RIGHT STABILIZER)(REAR)
15.	236-3940	[1]	SWITCH AS-ROCKER (FINE SWING)
16.	236-3934	[1]	SWITCH AS-ROCKER (AUTOMATIC ENGINE SPEED)
17.	236-3935	[1]	SWITCH AS-ROCKER (PARKING BRAKE)
18.	236-3936	[1]	SWITCH AS-ROCKER (OSCILLATING AXLE LOCK)
19.	236-3937	[1]	SWITCH AS-ROCKER (TRAVEL SPEED SELECT)
20.	236-3938	[1]	SWITCH AS-ROCKER (CREEPER SPEED)
21.	236-3939	[1]	SWITCH AS-ROCKER (TRAVEL ALARM CANCEL)
22.	193-9066	[1]	SWITCH AS-ROCKER (GENERATOR)
23.	236-3941	[1]	SWITCH AS-ROCKER (SMARTBOOM)
24.	193-9060	[1]	SWITCH AS-ROCKER (OVERLOAD WARNING)
			(EACH SWITCH AS INCLUDES)
	111-7899	[1]	GASKET
25.	236-7482	[1]	SWITCH AS-TOGGLE (BRAKE CHARACTERISTIC)
	195-2900	[1]	BOOT
26.	237-0172	[1]	PLATE
27.	237-9585	[1]	PLATE AS
28.	237-9586	[1]	PLATE
29.	237-9588	[1]	PLATE AS
30.	096-0061 B	[5]	STRAP-CABLE
31.	120-0090	[4]	WASHER (3.2X7X0.5-MM THK)
32.	120-9027 M	[4]	SCREW-PAN HEAD (M3X0.5X16-MM)
33.	3C-6969 M	[4]	NUT (M3X0.5-THD)
34.	3F-9556	[1]	LOCKWASHER
35.	5C-7261 M	[1]	NUT (M8X1.25-THD)
36.	5C-8312 M	[4]	NUT (M4X0.7-THD)
37.	5P-4116	[2]	WASHER-HARD (8.8X20.5X2-MM THK)
38.	8T-0287 M	[1]	BOLT (M5X0.8X10-MM)
39.	8T-2658 M	[2]	LOCKNUT (M3X0.5-THD)
40.	8T-3016	[1]	WASHER (5.3X10X1-MM THK)
41.	8T-4171 M	[1]	BOLT (M6X1X12-MM)
42.	8U-7803 M	[4]	SCREW
43.	9W-0335	[1]	LIGHTER AS-CIGAR (24-VOLT)
44.	9X-8256	[1]	WASHER (6.6X12X2-MM THK)
45.	226-5444	[1]	BRACKET
46.	205-7700	[1]	KIT-SERVICE METER
			(INCLUDES SERVICE METER FILM & SERVICE METER)
47.	195-7697	[1]	PLATE
48.	240-8786	[1]	ANTENNA AS
49.	236-7477	[1]	HARNESS AS (CAB)
		[10]	HOUSING
	121-1158	[1]	CONNECTOR-RECEPTACLE
	8L-8413	[40]	STRAP-CABLE (WHITE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[4]	KIT-CONNECTING PLUG (8-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
50.	236-7478	[1]	HARNESS AS (SERVICE CONNECTOR)
	9W-1951	[1]	RECEPTACLE-CONNECTOR (9-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP39320281

236-1449: WIRING GP-CAB RISER

WIRING GP-CAB RISER

236-1449 WIRING GP-CAB RISER
S/N XJA1-UP; PAN1-UP
PART OF 231-4434 OPERATOR AR

i02029217 SEBP3932

2361449 WIRING GP-CAB RISER Parts scheme

For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5W-6315	[1]	FITTING
2.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
3.	120-5967	[1]	SOCKET-WIRING
4.	127-0833	[1]	TANK AS-WINDOW WASHER
	7T-8891	[1]	PUMP AS-WASHER (24-VOLT)
	8E-8292	[1]	CAP-VENTED (WINDOW WASHER RESERVOIR)
	8E-8293	[1]	GROMMET
5.	132-1805	[1]	STRAP AS-GROUND
6.	194-3592	[1]	SWITCH AS (HORN/LIGHTS/WIPER)
	186-3735	[14]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
7.	195-7873	[1]	BRACKET
8.	214-0861	[1]	RECEPTACLE GP-AUXILIARY START (MEDIUM PRESSURE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[3]	PLUG-SEAL
9.	214-0864	[1]	RECEPTACLE AS (4-PIN)(SMARTBOOM DISABLE/MAGNET ON)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[4]	PLUG-SEAL
10.	236-7480	[1]	HARNESS AS (CHASISS)
	102-8805	[3]	KIT-RECEPTACLE (6-PIN)
	102-8801	[2]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[4]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[2]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[3]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[3]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[2]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11.	096-0061 B	[15]	STRAP-CABLE
12.	099-2374 M	[2]	BOLT-SOCKET HEAD (M5X0.8X12-MM)
13.	3F-9556	[2]	LOCKWASHER
14.	4P-8134	[2]	CLIP (LADDER)
15.	5C-7261 M	[2]	NUT (M8X1.25-THD)
16.	5P-4116	[4]	WASHER-HARD (8.8X20.5X2-MM THK)
17.	8T-3016	[2]	WASHER (5.3X10X1-MM THK)
18.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
19.	8T-4199 M	[2]	BOLT (M8X1.25X12-MM)
20.	144-0195 E		HOSE (370-CM)
21.	217-3403 E		SEAL (6.5-CM EACH)
22.	8T-3425 D		CHANNEL-TRIM (0.4-M)
	B		USE AS REQUIRED
	D		ORDER BY THE METER
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

#SEBP39320282

236-1450: WIRING GP-CAB RISER

WIRING GP-CAB RISER

236-1450 WIRING GP-CAB RISER
S/N XJA1-UP; PAN1-UP
PART OF 231-4434 OPERATOR AR

i02029216 SEBP3932

2361450 WIRING GP-CAB RISER Parts scheme

For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	102-8802	[1]	KIT-RECEPTACLE (2-PIN)(JOYSTICK, MAGNET ON/OFF)
			(INCLUDES RECEPTACLE AS & WEDGE)
	8T-8737	[2]	PLUG-SEAL
2.	214-0862	[1]	RECEPTACLE AS (MACHINE SECURITY SYSTEM)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
3.	214-0864	[1]	RECEPTACLE AS (4-PIN)(SMART BOOM DISABLE/MAGNET ON)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(KIT INCLUDES RECEPTACLE AS & WEDGE)
4.	219-5762	[4]	HARNESS AS-SENSOR
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(KIT INLCUDES RECEPTACLE AS & WEDGE)
5.	236-7481	[1]	HARNESS AS-CONSOLE
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6.	096-0061 B	[10]	STRAP-CABLE
	B		USE AS REQUIRED

#SEBP39320283

236-1451: WIRING GP-CONSOLE

WIRING GP-CONSOLE

236-1451 WIRING GP-CONSOLE
S/N XJA1-UP; PAN1-UP
PART OF 231-4434 OPERATOR AR

i02029214 SEBP3932

For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	9G-7641 Y	[1]	SWITCH GP-START (ENGINE, KEY)
2.	106-0107	[1]	SWITCH GP-ROTARY (AUTODIG MATERIAL SELECT)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	7Y-5458 M	[1]	NUT (M12X1-THD)
	7Y-5464	[1]	WASHER (12.2X15.4X0.5-MM THK)
	8T-8737	[1]	PLUG-SEAL
	106-0210	[1]	SEAL
	9X-3401	[5]	PIN-CONNECTOR (16-GA TO 18-GA)
			(FOR 16-18 GA WIRE)
			-OR-
	126-1767	[5]	PIN-CONNECTOR (14-GA TO 16-GA)
			(FOR 14 GA WIRE)
3.	185-9208	[1]	KNOB AS
4.	163-6710	[1]	SWITCH AS-TOGGLE (BACKUP CONTROL)
5.	163-6711	[1]	SWITCH AS-TOGGLE (BACKUP GOVERNOR)
6.	200-2555	[1]	PANEL
7.	200-2556	[1]	PLATE
8.	220-5815	[6]	SCREW-PAN HEAD
9.	236-7483	[1]	HARNESS AS (CONSOLE)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10.	236-7484	[1]	HARNESS AS (CONSOLE)
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11.	096-6166	[2]	WASHER-HARD (4.5X9X1-MM THK)
12.	097-5812	[1]	SPACER (26X32X2-MM THK)
13.	8T-0337 M	[2]	SCREW-MACHINE (M4X0.7X12-MM)
14.	8T-4223	[1]	WASHER-HARD (13.5X25.5X3-MM THK)
15.	096-0061 B	[6]	STRAP-CABLE
	B		USE AS REQUIRED
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP39320284

190-5038: WIRING GP-ENGINE

WIRING GP-ENGINE

190-5038 WIRING GP-ENGINE
S/N BMA1-UP
HIGH SIDE ACTIVATION OF AIR INLET HEATER RELAY
PART OF 212-0765 ENGINE AR-COMPLETE

i01488493 SEBP3932

For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[14]	STRAP-CABLE
2.	105-1797	[6]	MOUNT
3.	153-8920	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	6N-7523	[1]	WASHER (6.48X11.9X1.57-MM THK)
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	135-5975	[1]	GROMMET-WIRING
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
4.	156-6175	[2]	CLIP (LADDER)
5.	195-7336 Y	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)
6.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
7.	113-8690	[1]	WASHER (11.1X37.9X3.3-MM THK)
8.	7X-7729	[1]	WASHER (11X25X3-MM THK)
9.	6V-5217 M	[1]	BOLT (M8X1.25X20-MM)
10.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
11.	156-9890	[1]	WASHER (9X30X4-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP39320285

228-5786: WIRING GP-ENGINE

WIRING GP-ENGINE

228-5786 WIRING GP-ENGINE
S/N BMA4239-UP
PART OF 212-0765, 235-4131, 242-2596 ENGINE AR-COMPLETE

i01969436 SEBP3932

For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	3S-2093	[20]	STRAP-CABLE
2.	105-1797	[6]	MOUNT
3.	153-8920	[1]	HARNESS AS-ENGINE (UNIT INJECTOR)
	6N-7523	[1]	WASHER (6.48X11.9X1.57-MM THK)
	135-5975	[1]	GROMMET-WIRING
	9X-3402	[12]	SOCKET-CONNECTOR (16-GA TO 18-GA)
			-OR-
	126-1768	[12]	SOCKET-CONNECTOR (14-GA TO 16-GA)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, INTERFACE SEAL & WEDGE)
4.	195-7336 Y	[1]	HARNESS AS-ENGINE (ELECTRONIC CONTROL)
5.	227-1216	[1]	BRACKET
6.	156-6175	[1]	CLIP (LADDER)
7.	4P-7581	[1]	CLIP (LADDER)
8.	156-9890	[1]	WASHER (9X30X4-MM THK)
9.	113-8690	[1]	WASHER (11.1X37.9X3.3-MM THK)
10.	8T-4191 M	[1]	BOLT (M10X1.5X16-MM)
11.	8T-4189 M	[1]	BOLT (M8X1.25X20-MM)
12.	7X-7729	[1]	WASHER (11X25X3-MM THK)
13.	5P-4116	[1]	WASHER-HARD (8.8X20.5X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP39320286

235-6091: WIRING GP-FINE SWING

WIRING GP-FINE SWING

235-6091 WIRING GP-FINE SWING -FINE SWING
S/N XJA1-UP; PAN1-UP
PART OF 231-9800, 235-5783 CHASSIS AR

i01934446 SEBP3932

2356091 WIRING GP-FINE SWING Parts scheme

For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	7Y-8109	[1]	BRACKET AS
2.	193-3494	[1]	HARNESS AS-SOLENOID (FINE SWING)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
			(INCLUDES RECEPTCALE AS & WEDGE)
	155-2270	[1]	KIT-CONNECTING PLUG (2-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3.	8T-4137 M	[1]	BOLT (M10X1.5X20-MM)
4.	8T-4121	[2]	WASHER-HARD (11X21X2.5-MM THK)
5.	111-4837	[2]	CLIP
6.	8T-4136 M	[1]	BOLT (M10X1.5X25-MM)
	M		METRIC PART

#SEBP39320287

224-5906: WIRING GP-HYDRAULIC GENERATOR

WIRING GP-HYDRAULIC GENERATOR

224-5906 WIRING GP-HYDRAULIC GENERATOR
S/N XJA1-UP; PAN1-UP
PART OF 240-8349 GENERATOR AR-HYDRAULIC
AN ATTACHMENT

i02038863 SEBP3932

For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	194-0463	[1]	CABLE AS

#SEBP39320288

238-8966: WIRING GP-HYDRAULIC GENERATOR

WIRING GP-HYDRAULIC GENERATOR

238-8966 WIRING GP-HYDRAULIC GENERATOR
S/N XJA1-UP; PAN1-UP
PART OF 240-8349, 248-3252 GENERATOR AR-HYDRAULIC
AN ATTACHMENT

i02031785 SEBP3932

2388966 WIRING GP-HYDRAULIC GENERATOR Parts scheme

For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	239-7166	[1]	HARNESS AS-PANEL (RELAY, HYDRAULIC GENERATOR)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8806	[1]	KIT-RECEPTACLE (8-PIN)
			(EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
	155-2270	[2]	KIT-CONNECTING PLUG (2-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2.	3S-2093 B	[46]	STRAP-CABLE
3.	6N-9349	[1]	CIRCUIT BREAKER AS (30-AMPERE)(HYDRAULIC GENERATOR)
4.	240-6381	[1]	PLATE
5.	9X-8486	[2]	SCREW-MACHINE (8-32X0.75-IN)
6.	8T-0328	[2]	WASHER-HARD (5.5X10X1-MM THK)
7.	145-8980	[1]	WIRE AS
8.	166-4705	[1]	HARNESS AS-CONTROL (MAGNET)
		[1]	BOOT
		[1]	BOOT
	102-8803	[1]	KIT-RECEPTACLE (3-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[2]	KIT-CONNECTING PLUG (12-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
9.	224-5904	[1]	HARNESS AS-WIRING (MAGNET)
		[1]	BOOT
		[1]	BOOT
	102-8801	[1]	KIT-RECEPTACLE (12-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
	155-2255	[1]	KIT-CONNECTING PLUG (12-PIN)
			(INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
10.	239-7167	[1]	HARNESS AS-PANEL (RELAY, HYDRAULIC GENERATOR)
	102-8802	[1]	KIT-RECEPTACLE (2-PIN)
	102-8804	[2]	KIT-RECEPTACLE (4-PIN)
	102-8805	[1]	KIT-RECEPTACLE (6-PIN)
			(EACH INCLUDES RECEPTACLE AS & WEDGE)
	155-2265	[1]	KIT-CONNECTING PLUG (8-PIN)
	155-2260	[1]	KIT-CONNECTING PLUG (3-PIN)
	155-2271	[1]	KIT-CONNECTING PLUG (4-PIN)
	155-2274	[1]	KIT-CONNECTING PLUG (6-PIN)
			(EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
11.	241-0301	[1]	WIRE AS
12.	151-6308	[1]	FILM-IDENTIFICATION (MAGNET)
13.	241-2639	[1]	WIRE AS
14.	149-5050	[2]	RELAY (24-VOLT)(HYDRAULIC GENERATOR)
15.	7X-2619 M	[2]	BOLT (M6X1X10-MM)
16.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	M		METRIC PART

#SEBP39320289

241-8749: WIRING GP-HYDRAULIC GENERATOR

WIRING GP-HYDRAULIC GENERATOR

241-8749 WIRING GP-HYDRAULIC GENERATOR
S/N XJA1-UP; PAN1-UP
PART OF 235-0791 GENERATOR AR-HYDRAULIC
AN ATTACHMENT

i02370671 SEBP3932

2418749 WIRING GP-HYDRAULIC GENERATOR Parts scheme

For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	151-6308	[1]	FILM-IDENTIFICATION (MAGNET)
2.	237-5170	[1]	PLATE
3.	237-5172	[1]	BRACKET
4.	241-8747	[1]	PLUG AS-CONNECTOR
5.	241-8748	[1]	PLUG AS-CONNECTOR
6.	242-1974	[1]	LAMP AS (MAGNET ON/OFF)
7.	242-8153	[1]	CABLE AS
	2L-8054	[4]	TERMINAL-RING (6-GA, 1/2-IN SCREW)
			-OR-
	2L-8061	[4]	TERMINAL-RING (8-GA, 1/2-IN SCREW)
	6V-9023 BE		TUBE-HEAT SHRINK (12.7-MM DIA)
8.	096-0061 B	[27]	STRAP-CABLE
9.	4P-8134	[2]	CLIP (LADDER)
10.	7X-2534 M	[2]	BOLT (M6X1X50-MM)
11.	8T-4224	[2]	WASHER-HARD (8.8X16X2-MM THK)
12.	8T-7547 M	[2]	BOLT (M8X1.25X30-MM)
13.	9X-8256	[2]	WASHER (6.6X12X2-MM THK)
	B		USE AS REQUIRED
	E		ORDER BY THE CENTIMETER
	M		METRIC PART

Information:

ELECTRICAL AND STARTING SYSTEM

WIRING GP

Engine News

270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13

Special Instruction

Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}

Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}

Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}

Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}

Specifications

Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines

Tool Operating Manual

Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}

Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}

Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}

Troubleshooting

CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engine for Caterpillar Built Machines

CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engine for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engine for Caterpillar Built Machines

CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0248 FMI 09 Cat Data Link not communicating
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines

CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines

CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines

CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engine for Caterpillar Built Machines

CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engine for Caterpillar Built Machines

CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engine for Caterpillar Built Machines

CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engine for Caterpillar Built Machines

CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engine for Caterpillar Built Machines

CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engine for Caterpillar Built Machines

CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engine for Caterpillar Built Machines

How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines

CID 1627 FMI 05 Fuel Pump Relay open circuit
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 1627 FMI 06 Fuel Pump Relay short to ground
3126B Engine for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Cat Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Speed/Timing Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines

Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Switch Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Low Engine Oil Pressure Lamp Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Air Inlet Heater Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

Electrical Power Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines

CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3126B Engine for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Lock Switch Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Lock Lamp Circuit - Test
3126B Engine for Caterpillar Built Machines

Digital Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Throttle Position Sensor Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Electrical Power Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Fuel Pump Relay Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Shutdown Switch Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Engine Shutdown Switch Circuit - Test
3126B Engine for Caterpillar Built Machines

Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engine for Caterpillar Built Machines

CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0091 FMI 02 Incorrect Throttle Switch inputs
3126B Engine for Caterpillar Built Machines

Air Inlet Heater Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engine for Caterpillar Built Machines

Cat Data Link Circuit - Test
3126B Engine for Caterpillar Built Machines

Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines

5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines

Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engine for Caterpillar Built Machines

CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engine for Caterpillar Built Machines

Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines

Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines

Throttle Switch Circuit - Test
3126B Engine for Caterpillar Built Machines

CID 0444 FMI 05 Start Relay open circuit
3126B Engine for Caterpillar Built Machines

CID 0444 FMI 06 Start Relay short to ground
3126B Engine for Caterpillar Built Machines

Start Relay Circuit - Test
3126B Engine for Caterpillar Built Machines

CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

Engine Wiring Information
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit

CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders

CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines

CID 0544 FMI 08 Engine Cooling Fan Speed signal abnormal
3126B Engine for Caterpillar Built Machines

CID 0291 FMI 12 Engine Cooling Fan Solenoid malfunction
3126B Engine for Caterpillar Built Machines

Engine Fan Speed Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines

Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines

Service Magazine

Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04

Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13

Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17

Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05

Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08

Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08