AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

245-9440 WIRING GP-HYDRAULIC GENERATOR S/N XJA1-213; PAN1-253 PART OF 235-0791 GENERATOR AR-HYDRAULIC AN ATTACHMENT M325C MH


ELECTRICAL AND STARTING SYSTEM
WIRING GP

WHEELED EXCAVATOR M325C MH WHEELED EXCAVATOR PAN
 M325C Material Handler PAN00001-UP (MACHINE) POWERED BY 3126B Engine SEBP3932 M325C MH PAN   (2004)

ELECTRICAL AND STARTING SYSTEM

WIRING GP
WIRING GP-HYDRAULIC GENERATOR
238-8966 WIRING GP-HYDRAULIC GENERATOR
WIRING GP-HYDRAULIC GENERATOR
241-8749 WIRING GP-HYDRAULIC GENERATOR
WIRING GP-HYDRAULIC GENERATOR
245-9440 WIRING GP-HYDRAULIC GENERATOR
WIRING GP-MONITOR
241-9217 WIRING GP-MONITOR
WIRING GP-PLATFORM
242-3128 WIRING GP-PLATFORM
WIRING GP-PLATFORM
262-1889 WIRING GP-PLATFORM
 

#SEBP39320290
 

245-9440: WIRING GP-HYDRAULIC GENERATOR

245-9440 WIRING GP-HYDRAULIC GENERATOR
S/N XJA1-213; PAN1-253
PART OF 235-0791 GENERATOR AR-HYDRAULIC
AN ATTACHMENT
i02370682 SEBP3932
2459440 WIRING GP-HYDRAULIC GENERATOR Parts scheme 2459440 WIRING GP-HYDRAULIC GENERATOR Parts scheme
  For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 264-1960 [1] HARNESS AS-WIRING  
2. 3S-2093 B [46] STRAP-CABLE  
3. 196-8643 [1] SWITCH AS-MAGNETIC (24-VOLT)(START RELAY)  
4. 7X-2619 M [1] BOLT (M6X1X10-MM)  
5. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
6. 247-6906 Y [1] CONTROL GP-HYDRAULIC GENERATOR  
7. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
8. 8T-4189 M [4] BOLT (M8X1.25X20-MM)  
9. 5C-7261 M [4] NUT (M8X1.25-THD)  
10. 170-8599 [1] FILM-WARNING (GENERATOR DISCONNECT SWITCH)  
11. 264-1959 [1] HARNESS AS-BOX  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39320291
 

241-9217: WIRING GP-MONITOR

241-9217 WIRING GP-MONITOR
S/N XJA1-UP; PAN1-UP
GENERATOR
AN ATTACHMENT
i02023465 SEBP3932
2419217 WIRING GP-MONITOR Parts scheme
  For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 166-4703 [1] MONITOR (GENERATOR SET)  
2. 200-2557 [3] GUARD  
3. 226-6005 [1] BRACKET AS  
4. 237-3554 [1] HARNESS AS  
5. 242-7407 [1] HARNESS AS  
    (EACH HARNESS AS INCLUDES)
  102-8801 [1] KIT-RECEPTACLE (12-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2255 [1] KIT-CONNECTING PLUG (12-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
6. 096-0061 B [5] STRAP-CABLE  
7. 129-3178 M [3] LOCKNUT (M6X1-THD)  
8. 149-0672 M [3] BOLT-SOCKET HEAD (M6X1X25-MM)  
9. 8C-9660 [2] WASHER (4.6X7.9X0.8-MM THK)  
10. 8T-9405 M [2] BOLT-SOCKET HEAD (M4X0.7X16-MM)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39320292
 

242-3128: WIRING GP-PLATFORM

242-3128 WIRING GP-PLATFORM
S/N PAN1-UP
AN ATTACHMENT
i02023425 SEBP3932
2423128 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-3555 [1] HARNESS AS  
  102-8805 [2] KIT-RECEPTACLE (6-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  155-2274 [2] KIT-CONNECTING PLUG (6-PIN)  
    (EACH INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
2. 096-0061 B [3] STRAP-CABLE  
  B   USE AS REQUIRED
 

#SEBP39320293
 

262-1889: WIRING GP-PLATFORM

262-1889 WIRING GP-PLATFORM
S/N PAN1-UP
BUTT-N-TOP, FLOAT
PART OF 260-3587 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02322508 SEBP3932
2621889 WIRING GP-PLATFORM Parts scheme
  For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 2H-1855 [1] SWITCH AS-FOOT (BOOM FLOAT)  
  6V-8362 [3] SCREW-MACHINE (8-32X0.31-IN)  
  9B-7233 [3] LOCKWASHER  
2. 262-1884 [1] PLATE  
3. 262-1886 [1] SUPPORT  
4. 262-1888 [1] HARNESS AS-CONTROL (BOOM FLOAT)  
  2L-8075 [2] TERMINAL-RING (14-GA TO 16-GA, NO. 8 SCREW)  
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS,WEDGE,& INTERFACESEAL)
5. 1A-0621 [1] GROMMET  
6. 6V-1322 [2] BOLT (1/4-20X0.375-IN)  
7. 8T-4200 M [4] BOLT (M8X1.25X16-MM)  
8. 8T-4205 [2] WASHER-HARD (7.2X14.5X2-MM THK)  
9. 8T-4224 [4] WASHER-HARD (8.8X16X2-MM THK)  
10. 3S-2093 B STRAP-CABLE  
11. 263-7951 [1] HARNESS AS-PANEL  
  102-8802 [2] KIT-RECEPTACLE (2-PIN)  
    (EACH INCLUDES RECEPTACLE AS & WEDGE)
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (INCLUDES PLUG AS & WEDGE)
  155-2271 [2] KIT-CONNECTING PLUG (4-PIN)  
    (EACH INCLUDES PLUG AS & WEDGE)
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39320294
 

251-1952: WIRING GP-RADIO

251-1952 WIRING GP-RADIO
S/N XJA1-UP; PAN1-UP
PART OF 251-5736 RADIO GP
AN ATTACHMENT
i02195989 SEBP3932
2511952 WIRING GP-RADIO Parts scheme
  For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 5W-1987 [4] TERMINAL-BLADE (12-GA TO 16-GA)  
2. 5W-4957 [1] HOUSING  
3. 232-1474 [1] HARNESS AS-RADIO  
  102-8806 [1] KIT-RECEPTACLE (8-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2265 [1] KIT-CONNECTING PLUG (8-PIN)  
    (INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
4. 096-0061 B [4] STRAP-CABLE  
  B   USE AS REQUIRED
 

#SEBP39320295
 

237-0074: WIRING GP-SENSOR

237-0074 WIRING GP-SENSOR -TRAVEL SPEED
S/N XJA1-UP; PAN1-UP
PART OF 234-4200, 235-4445 POWER TRAIN AR
i01991909 SEBP3932
2370074 WIRING GP-SENSOR Parts scheme
  For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 237-0075 [1] HARNESS AS-SENSOR (TRAVEL SPEED)  
  9X-3401 [3] PIN-CONNECTOR (16-GA TO 18-GA)  
  114-8843 E SLEEVE-PLASTIC (25-CM)  
  2L-8068 [1] TERMINAL-RING (10-GA TO 12-GA, 5/16-IN SCREW)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
2. 3S-2093 B [4] STRAP-CABLE  
  B   USE AS REQUIRED
  E   ORDER BY THE CENTIMETER
 

#SEBP39320296
 

234-9341: WIRING GP-STABILIZER

234-9341 WIRING GP-STABILIZER
S/N XJA1-239; PAN1-293
PART OF 234-4100, 235-4444 FRAME AR-UNDERCARRIAGE
i01989046 SEBP3932
2349341 WIRING GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-2262 [1] WEDGE-PLUG LOCK (4-PIN)  
2. 155-2276 [1] WEDGE-PLUG LOCK (3-PIN)  
3. 175-3350 [1] PLUG AS-CONNECTOR  
4. 175-3352 [1] PLUG AS-CONNECTOR  
5. 199-6978 [1] ROD  
6. 234-9342 [1] HARNESS AS-SOLENOID (U/C - SWITCH TO BATTERY)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
    (KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 234-9343 Y [1] SWIVEL GP-ELECTRIC (ELECTRIC)  
8. 096-0061 B [6] STRAP-CABLE  
9. 3F-9556 [1] LOCKWASHER  
10. 5C-7261 M [1] NUT (M8X1.25-THD)  
11. 5C-9553 M [2] BOLT (M6X1X16-MM)  
12. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39320297
 

234-9341: WIRING GP-STABILIZER

234-9341 WIRING GP-STABILIZER
S/N XJA240-UP; PAN294-UP
PART OF 234-4100, 235-4444 FRAME AR-UNDERCARRIAGE
i02365155 SEBP3932
2349341 WIRING GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
2. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 175-3350 [3] PLUG AS-CONNECTOR  
4. 175-3352 [1] PLUG AS-CONNECTOR  
5. 199-6978 [1] ROD  
6. 234-9342 [1] HARNESS AS-SOLENOID  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
7. 249-6923 CY [1] SWIVEL GP-ELECTRIC  
8. 096-0061 [6] STRAP-CABLE  
9. 3F-9556 [1] LOCKWASHER  
10. 5C-7261 M [1] NUT (M8X1.25-THD)  
11. 5C-9553 M [2] BOLT (M6X1X16-MM)  
12. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
  C   CHANGE FROM PREVIOUS TYPE
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39320298
 

303-9264: WIRING GP-STABILIZER

303-9264 WIRING GP-STABILIZER
S/N XJA1-UP
PART OF 234-4100 FRAME AR-UNDERCARRIAGE
i02745261 SEBP3932
3039264 WIRING GP-STABILIZER Parts scheme 3039264 WIRING GP-STABILIZER Parts scheme 3039264 WIRING GP-STABILIZER Parts scheme
  For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
2. 155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
3. 175-3350 [1] PLUG AS-CONNECTOR  
4. 175-3352 [1] PLUG AS-CONNECTOR  
5. 199-6978 [1] ROD  
6. 249-6923 Y [1] SWIVEL GP-ELECTRIC  
7. 304-0704 [1] HARNESS AS-WIRING  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
8. 3F-9556 [1] LOCKWASHER  
9. 5C-7261 M [1] NUT (M8X1.25-THD)  
10. 5C-9553 M [2] BOLT (M6X1X16-MM)  
11. 5P-4116 [2] WASHER-HARD (8.8X20.5X2-MM THK)  
12. 096-0061 B [10] STRAP-CABLE  
  B   USE AS REQUIRED
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39320299
 

260-5154: WIRING GP-WORK TOOL

260-5154 WIRING GP-WORK TOOL
S/N PAN1-UP
BUTT-N-TOP
PART OF 260-3587 CONTROL AR-AUXILIARY
AN ATTACHMENT
i02322692 SEBP3932
2605154 WIRING GP-WORK TOOL Parts scheme 2605154 WIRING GP-WORK TOOL Parts scheme
  For full view, you need register

Parts for your M325C MH WHEELED EXCAVATOR:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 3S-2093 [37] STRAP-CABLE  
2. 4P-7428 [1] CLIP (LADDER)  
3. 4P-7429 [1] CLIP (LADDER)  
4. 7X-2619 M [1] BOLT (M6X1X10-MM)  
5. 9X-8256 [1] WASHER (6.6X12X2-MM THK)  
6. 3E-5239 [1] RELAY AS (24-VOLT)(RELAY PANEL)  
7. 111-4836 [2] CLIP  
8. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
9. 8T-4121 [2] WASHER-HARD (11X21X2.5-MM THK)  
10. 8T-4133 M [2] NUT (M10X1.5-THD)  
11. 6V-2383 [1] CLIP  
12. 8T-4183 M [1] BOLT (M12X1.75X40-MM)  
13. 5P-1076 [1] WASHER-HARD (13.5X30X4-MM THK)  
14. 217-0743 [1] HARNESS AS-CHASSIS  
  102-8802 [3] KIT-RECEPTACLE (2-PIN)  
  102-8803 [1] KIT-RECEPTACLE (3-PIN)  
  102-8804 [1] KIT-RECEPTACLE (4-PIN)  
    (EACH RECEPTACLE KIT INCLUDES RECEPTACLE AS & WEDGE)
  155-2260 [1] KIT-CONNECTING PLUG (3-PIN)  
  155-2270 [4] KIT-CONNECTING PLUG (2-PIN)  
  155-2271 [1] KIT-CONNECTING PLUG (4-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
15. 261-0737 [1] HARNESS AS-PUMP  
  102-8805 [1] KIT-RECEPTACLE (6-PIN)  
    (INCLUDES RECEPTACLE AS & WEDGE)
  155-2270 [1] KIT-CONNECTING PLUG (2-PIN)  
  155-2274 [1] KIT-CONNECTING PLUG (6-PIN)  
    (EACH PLUG KIT INCLUDES PLUG AS, WEDGE & INTERFACE SEAL)
  M   METRIC PART
 

Information:

Engine News
270-5051 Repair Kit (Electrical Connectors) Available for Repairs to Wiring Harnesses with Ampseal 16 and A4E 2 Connectors {0709, 1408}
2006/03/20
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2010/05/13
Special Instruction
Cross-Reference for Electrical Connectors {7553}
Cross-Reference for Electrical Connectors {7553}
Circuit Breaker Harness Assembly {1420}
Circuit Breaker Harness Assembly {1420}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Service Of Machined Terminals And Service of Stamped and Formed Terminals{7553}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Installation and Operation of the Exhaust Monitor Used in All Diesel Particulate Filter (DPF) Retrofit Emissions Applications{1091, 1408, 7490, 7498}
Specifications
Electronic Control Wiring Group
3126B Engine for Caterpillar Built Machines
Tool Operating Manual
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the 362-3555 Connector Repair Kit to Service Harnesses with Ampseal 16 Connectors{0685, 1408}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{7553}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the U5MK1110 Ampseal Connector Kit for Wiring Harness Repairs on Perkins Engines{0374, 0599, 0701, 0709}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Troubleshooting
CID 0168 FMI 02 System Voltage intermittent/erratic
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 01 System Voltage Low
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0168 FMI 00 System Voltage High
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0291 FMI 05 Engine Cooling Fan Solenoid open circuit
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0291 FMI 06 Engine Cooling Fan Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Electrical Connectors - Inspect
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0100 FMI 03 Engine Oil Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0100 FMI 04 Engine Oil Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0172 FMI 03 Intake Manifold Air Temp open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0172 FMI 04 Intake Manifold Air Temp short to ground
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 03 Turbo Outlet Pressure open/short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0273 FMI 04 Turbo Outlet Pressure short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0274 FMI 03 Atmospheric Pressure open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0274 FMI 04 Atmospheric Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0041 FMI 04 8 Volt DC Supply short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0248 FMI 09 Cat Data Link not communicating
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0548 FMI 06 Throttle Lock Lamp short
3126B Engine for Caterpillar Built Machines
CID 0548 FMI 05 Throttle Lock Lamp open circuit
3126B Engine for Caterpillar Built Machines
CID 0042 FMI 11 Inject Actuation Control Valve open/short
3126B Engine for Caterpillar Built Machines
CID 0094 FMI 03 Fuel Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0094 FMI 04 Fuel Pressure short to ground
3126B Engine for Caterpillar Built Machines
CID 0110 FMI 03 Engine Coolant Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0110 FMI 04 Engine Coolant Temperature short to ground
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 00 High Injector Actuation Pressure
3126B Engine for Caterpillar Built Machines
CID 0164 FMI 03 Injector Actuation Pressure voltage high
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 03 Engine Oil Temperature open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0175 FMI 04 Engine Oil Temperature short to ground
3126B Engine for Caterpillar Built Machines
CID 0267 FMI 02 Incorrect Engine Shutdown Switch inputs
3126B Engine for Caterpillar Built Machines
CID 0600 FMI 03 Hydraulic Oil Temperature open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0600 FMI 04 Hydraulic Oil Temperature short to ground
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0041 FMI 03 8 Volt DC Supply short to +batt
3126B Engine for Caterpillar Built Machines
How To Use the Functional Tests
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0091 FMI 08 Throttle Position signal abnormal
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 11 Injector Actuation Pressure system fault
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0190 FMI 02 Loss of Engine Speed Signal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0190 FMI 11 Engine Speed Sensor mechanical failure
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engine for Caterpillar Built Machines
CID 1627 FMI 05 Fuel Pump Relay open circuit
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1627 FMI 06 Fuel Pump Relay short to ground
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Cat Data Link Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Speed/Timing Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Injection Actuation Pressure Control Valve Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Low Engine Oil Pressure Lamp Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Air Inlet Heater Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Throttle Position Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Electrical Power Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0290 FMI 03 Engine Fan Pump Pressure open/short to +batt
3126B Engine for Caterpillar Built Machines
CID 0290 FMI 04 Engine Fan Pump Pressure short to ground
3126B Engine for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Lock Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Lock Lamp Circuit - Test
3126B Engine for Caterpillar Built Machines
Digital Sensor Supply Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Throttle Position Sensor Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Electrical Power Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Fuel Pump Relay Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1582 FMI 03 Trans Lube Oil Temp Sensor open/short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1582 FMI 04 Trans Lube Oil Temp Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 1589 FMI 03 Turbo Inlet Air Pressure Sensor open/shrt to +bat
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Air Filter Restriction Lamp - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Shutdown Switch Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Fan Control Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 05 Air Inlet Heater Relay open/current below normal
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Sensors and Electrical Connectors
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0342 FMI 03 Secondary Engine Speed open/short to +batt
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Engine Shutdown Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Fan Reversing Solenoid Circuit - Test
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0164 FMI 02 Injector Actuation Pressure signal erratic
3126B Engine for Caterpillar Built Machines
CID 0342 FMI 02 Loss of Secondary Engine Speed signal
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0091 FMI 02 Incorrect Throttle Switch inputs
3126B Engine for Caterpillar Built Machines
Air Inlet Heater Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0164 FMI 04 Injector Actuation Pressure voltage low
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0342 FMI 11 Secondary Engine Speed Sensor mechanical failure
3126B Engine for Caterpillar Built Machines
Cat Data Link Circuit - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
5 Volt Engine Pressure Sensor Supply Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
Analog Sensor Supply Circuit - Test
3126B Engines for the IT38G Series II Integrated Toolcarrier and the 938G Series II Wheel Loader
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engine for Caterpillar Built Machines
CID 0262 FMI 04 5 Volt Sensor DC Power Supply short to ground
3126B Engine for Caterpillar Built Machines
Sensors and Electrical Connectors
3126B Engine for Caterpillar Built Machines
Engine Pressure Sensor Open or Short Circuit - Test
3126B Engine for Caterpillar Built Machines
Throttle Switch Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0444 FMI 05 Start Relay open circuit
3126B Engine for Caterpillar Built Machines
CID 0444 FMI 06 Start Relay short to ground
3126B Engine for Caterpillar Built Machines
Start Relay Circuit - Test
3126B Engine for Caterpillar Built Machines
CID 0485 FMI 03 Engine Fan Rev Solenoid short to +batt
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0485 FMI 04 Engine Fan Rev Solenoid short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
Engine Wiring Information
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 0262 FMI 03 5 Volt Sensor DC Power Supply short to +batt
3126B Engines for 322C, 325C, and M325C Excavators and for the 325C Mobile Hydraulic Power Unit
CID 1589 FMI 04 Turbo Inlet Air Pressure Sensor short to ground
3126B Engines for the IT62G Series II Integrated Toolcarrier and for the 950G Series II and 962G Series II Wheel Loaders
CID 0617 FMI 06 Air Inlet Heater Relay grounded/current above norm
3126B Engine for Caterpillar Built Machines
CID 0544 FMI 08 Engine Cooling Fan Speed signal abnormal
3126B Engine for Caterpillar Built Machines
CID 0291 FMI 12 Engine Cooling Fan Solenoid malfunction
3126B Engine for Caterpillar Built Machines
Engine Fan Speed Sensor Circuit - Test
3126B Engine for Caterpillar Built Machines
Engine Fan Control Solenoid Circuit - Test
3126B Engine for Caterpillar Built Machines
Service Magazine
Dielectric Grease Should Not Be Used in Electrical Connectors {1408, 7553}
2012/05/04
Service of the Machined Terminals and the Stamped and Formed Terminals {7553}
2006/11/13
Updated Instruction For The Bypass Harness {0785, 1408}
2008/03/17
Bulk Wiring Harnesses Are Available for Use with Caterpillar Products {1408}
2012/03/05
Striped Wire Is Replaced With Improved Ink Jet Identification for Legacy (Parts Service) Wire harnesses {1408}
2012/06/08
Use Conductive Fasteners for Electrical Grounding on All Cat Products {7553, 7556}
2012/05/08
Information On Battery Cables and Wire Assemblies for Assembling at Dealer Site {4459}
2012/09/21

Caterpillar Parts SIS Catalog M325C MH :

WIRING GP-HYDRAULIC GENERATOR
241-8749 WIRING GP-HYDRAULIC GENERATOR
WIRING GP-HYDRAULIC GENERATOR
238-8966 WIRING GP-HYDRAULIC GENERATOR
224-5906 WIRING GP-HYDRAULIC GENERATOR
WIRING GP-FINE SWING
235-6091 WIRING GP-FINE SWING
WIRING GP-ENGINE
228-5786 WIRING GP-ENGINE
WIRING GP-ENGINE
190-5038 WIRING GP-ENGINE
WIRING GP-CONSOLE
236-1451 WIRING GP-CONSOLE
WIRING GP-CAB RISER
236-1450 WIRING GP-CAB RISER
WIRING GP-MONITOR
241-9217 WIRING GP-MONITOR
WIRING GP-PLATFORM
242-3128 WIRING GP-PLATFORM
WIRING GP-PLATFORM
262-1889 WIRING GP-PLATFORM
WIRING GP-RADIO
251-1952 WIRING GP-RADIO
WIRING GP-SENSOR
237-0074 WIRING GP-SENSOR
WIRING GP-STABILIZER
234-9341 WIRING GP-STABILIZER
WIRING GP-STABILIZER
234-9341 WIRING GP-STABILIZER
WIRING GP-STABILIZER
303-9264 WIRING GP-STABILIZER

Truck sale:

CATERPILLAR M 325C MH 2007
 
CATERPILLAR M 325C MH 2007
- MATERIAL HANDLERS / DEMOLITION
KELLY TRACTOR
United States
 
 
CATERPILLAR M325CMH 2005
- WHEEL EXCAVATORS
TOROMONT
For All your Used Equipment Needs - in Ontario, Manitoba, Newfoundlan
 
USD $357,412 
2005 CAT M325C MH

TOROMONT CAT - Main
TORONTO, Ontario, Canada
 
 
2005 CAT M325C MH

EURO AUCTIONS
United Kingdom
2005 CAT M325C MH
 
2005 CAT M325C MH

EURO AUCTIONS
United Kingdom
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.