HYDRAULIC SYSTEM
VALVE GP-PILOTVALVE GP-SOLENOID
PUMP GP
IMPLEMENTS
LINK GPLINKAGE GP
OPERATOR STATION
CONSOLE GPHYDRAULIC SYSTEM
VALVE GP-PILOT
#SEBP39610260
196-6109: VALVE GP-PILOT
196-6109 VALVE GP-PILOT -LH JOYSTICK
S/N WBE1-UP
PART OF 194-2714 CONTROL GP-PILOT OPERATED HYD
S/N WBE1-UP
PART OF 194-2714 CONTROL GP-PILOT OPERATED HYD
For full view, you need register
Parts for your TK380 WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 223-4373 | [1] | CONTROL GP-HANDLE | |
| 139-6366 M | [1] | NUT (M14X2-THD) | ||
| 2. | 223-4375 | [1] | KIT-SWIVEL | |
| (INCLUDES SCREW, BOLT, NUT, RETAINER, SWIVEL & 2 PLATES) | ||||
| 3. | 223-4376 | [2] | KIT-PIN | |
| (EACH INCLUDES 2 RETAINERS, SPRING, GUIDE SPRING, SEAL-O-RING, 2 SHIM PACKS, 3 RETAINING RINGS, SEAL & SHAFT) | ||||
| 4. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 5. | 3J-1907 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
#SEBP39610261
196-6110: VALVE GP-PILOT
196-6110 VALVE GP-PILOT -RH JOYSTICK
S/N WBE1-UP
PART OF 194-2714 CONTROL GP-PILOT OPERATED HYD
S/N WBE1-UP
PART OF 194-2714 CONTROL GP-PILOT OPERATED HYD
For full view, you need register
Parts for your TK380 WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 223-4374 | [1] | CONTROL GP-HANDLE | |
| 139-6366 M | [1] | NUT (M14X2-THD) | ||
| 2. | 223-4375 | [1] | KIT-SWIVEL | |
| (INCLUDES SCREW, BOLT, NUT, RETAINER, SWIVEL & 2 PLATES) | ||||
| 3. | 223-4376 | [4] | KIT-PIN | |
| (EACH INCLUDES 2 RETAINERS, SPRING, GUIDE SPRING, SEAL-O-RING, 2 SHIM PACKS, 3 RETAINING RINGS, SEAL & SHAFT) | ||||
| 4. | 9S-8004 | [1] | PLUG (9/16-18-THD) | |
| 5. | 3J-1907 | [1] | SEAL-O-RING | |
| M | METRIC PART | |||
#SEBP39610262
152-8346: VALVE GP-SOLENOID
152-8346 VALVE GP-SOLENOID
S/N WBE1-UP
24-VOLT
PART OF 194-2702, 228-4471 FAN AR-REVERSIBLE
AN ATTACHMENT
S/N WBE1-UP
24-VOLT
PART OF 194-2702, 228-4471 FAN AR-REVERSIBLE
AN ATTACHMENT
For full view, you need register
Parts for your TK380 WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-9894 | [1] | COIL AS (24-VOLT) | |
| 1A. | 102-8802 | [1] | KIT-RECEPTACLE (2-PIN) | |
| (INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 1B. | 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | |
| 1C. | 1S-9593 | [2] | STRAP-CABLE | |
| 2. | 170-7485 | [1] | SPOOL AS-VALVE | |
| 2A. | 111-0343 | [1] | LOCKNUT (5/16-18-THD) | |
| 2B. | 8C-9987 | [1] | WASHER (8.3X28X2.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 109-3036 | [1] | KIT-SEAL | ||
| (INCLUDES SEALS & RINGS) | ||||
#SEBP39610263
171-3685: VALVE GP-SOLENOID
171-3685 VALVE GP-SOLENOID
S/N WBE1-UP
24-VOLT
PART OF 197-7156 VALVE GP-COMBINATION, 198-4390 VALVE GP-SOLENOID & MANIFOLD
Type 1
S/N WBE1-UP
24-VOLT
PART OF 197-7156 VALVE GP-COMBINATION, 198-4390 VALVE GP-SOLENOID & MANIFOLD
Type 1
For full view, you need register
Parts for your TK380 WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 189-0189 | [1] | COIL AS (24-VOLT) | |
| 8T-8729 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 3E-3365 | [1] | WEDGE-RECEPTACLE LOCK (2-PIN) | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 171-3684 | [1] | VALVE AS | |
| 8C-9987 | [1] | WASHER (8.3X28X2.5-MM THK) | ||
| 111-0343 | [1] | LOCKNUT (5/16-18-THD) | ||
| 3. | 111-0343 | [1] | LOCKNUT (5/16-18-THD) | |
| 4. | 8C-9987 | [1] | WASHER (8.3X28X2.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 160-3771 | [1] | KIT-SEAL | ||
| (INCLUDES SEALS & RINGS) | ||||
#SEBP39610264
171-3685: VALVE GP-SOLENOID
171-3685 VALVE GP-SOLENOID
S/N WBE1-UP
24-VOLT
PART OF 197-7156 VALVE GP-COMBINATION, 198-4390 VALVE GP-SOLENOID & MANIFOLD
Type 2
S/N WBE1-UP
24-VOLT
PART OF 197-7156 VALVE GP-COMBINATION, 198-4390 VALVE GP-SOLENOID & MANIFOLD
Type 2
For full view, you need register
Parts for your TK380 WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 218-9894 C | [1] | COIL AS (24-VOLT) | |
| [1] | WASHER-SPRING | |||
| 186-3735 | [2] | PIN-CONNECTOR (16-GA TO 18-GA) | ||
| 1S-9593 | [2] | STRAP-CABLE | ||
| 102-8802 | [2] | KIT-RECEPTACLE (2-PIN) | ||
| (EACH INCLUDES RECEPTACLE AS & WEDGE) | ||||
| 2. | 171-3684 | [1] | VALVE AS | |
| 8C-9987 | [1] | WASHER (8.3X28X2.5-MM THK) | ||
| 111-0343 | [1] | LOCKNUT (5/16-18-THD) | ||
| 3. | 111-0343 | [1] | LOCKNUT (5/16-18-THD) | |
| 4. | 8C-9987 | [1] | WASHER (8.3X28X2.5-MM THK) | |
| AVAILABLE REPAIR KIT(S): | ||||
| 160-3771 | [1] | KIT-SEAL | ||
| (INCLUDES SEALS & RINGS) | ||||
| C | CHANGE FROM PREVIOUS TYPE | |||
#SEBP39610265
198-4390: VALVE GP-SOLENOID & MANIFOLD
198-4390 VALVE GP-SOLENOID & MANIFOLD
S/N WBE1-UP
SAW
PART OF 194-2673 PUMP & MTG GP-HYDRAULIC
S/N WBE1-UP
SAW
PART OF 194-2673 PUMP & MTG GP-HYDRAULIC
For full view, you need register
Parts for your TK380 WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 9S-8002 | [2] | PLUG (7/16-20-THD) | |
| 2. | 3J-1907 | [2] | SEAL-O-RING | |
| 3. | 9S-8005 | [1] | PLUG (3/4-16-THD) | |
| 4. | 3K-0360 | [1] | SEAL-O-RING | |
| 5. | 171-3685 Y | [1] | VALVE GP-SOLENOID (24-VOLT)(SAW) | |
| 6. | 4J-0520 | [1] | SEAL-O-RING | |
| 7. | 9S-8004 | [2] | PLUG (9/16-18-THD) | |
| 8. | 3J-7354 | [2] | SEAL-O-RING | |
| 9. | 4J-7533 | [4] | SEAL-O-RING | |
| 10. | 9S-8001 | [4] | PLUG | |
| 11. | 224-8164 | [2] | CARTRIDGE AS-VALVE | |
| Y | SEPARATE ILLUSTRATION | |||
#SEBP39610266
201-9711: LINK GP-TILT
201-9711 LINK GP-TILT
S/N WBE1-UP
SINGLE POST HEAD
CANNOT BE USED WITH 201-9712 LINK GP-TILT, 205-9881 HEAD AR-FELLING, 205-9882 HEAD AR-FELLING
AN ATTACHMENT
S/N WBE1-UP
SINGLE POST HEAD
CANNOT BE USED WITH 201-9712 LINK GP-TILT, 205-9881 HEAD AR-FELLING, 205-9882 HEAD AR-FELLING
AN ATTACHMENT
For full view, you need register
#SEBP39610267
201-9712: LINK GP-TILT
201-9712 LINK GP-TILT
S/N WBE1-UP
DUAL POST HEAD
PART OF 222-5029 HEAD AR-FELLING
CANNOT BE USED WITH 201-9711 LINK GP-TILT, 205-9881 HEAD AR-FELLING, 205-9882 HEAD AR-FELLING
AN ATTACHMENT
S/N WBE1-UP
DUAL POST HEAD
PART OF 222-5029 HEAD AR-FELLING
CANNOT BE USED WITH 201-9711 LINK GP-TILT, 205-9881 HEAD AR-FELLING, 205-9882 HEAD AR-FELLING
AN ATTACHMENT
For full view, you need register
Parts for your TK380 WHEEL FELLER BUNCHER:
CATERPILLAR SIS#SEBP39610268
194-2695: LINKAGE GP-FELLING HEAD
For full view, you need register
Parts for your TK380 WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 3B-8489 | [12] | FITTING-GREASE (1/8-27 PTF) | |
| 2. | 9C-7907 | [2] | SPACER (21.5X28X14-MM THK) | |
| 3. | 134-0165 | [14] | WASHER (13.8X45X3-MM THK) | |
| 4. | 200-7013 | [1] | LEVER AS-TILT | |
| 5. | 201-9694 | [6] | PIN AS | |
| 6. | 201-9696 | [4] | PIN AS | |
| 7. | 201-9698 | [4] | PIN AS | |
| 8. | 202-0852 | [1] | LEVER AS-TILT | |
| 9. | 202-2010 | [1] | ARM & BEARING AS-LIFT | |
| 9A. | 3K-6575 | [2] | BUSHING | |
| 9B. | 7J-9745 | [4] | BUSHING | |
| 9C. | 9J-3206 | [2] | BEARING-SPHERICAL | |
| 10. | 203-0325 | [8] | WASHER | |
| 11. | 203-0327 | [10] | WASHER | |
| 12. | 7K-9203 | [4] | SEAL-LIP TYPE | |
| 13. | 7K-9206 | [8] | SEAL-LIP TYPE | |
| 14. | 8T-4179 M | [12] | BOLT (M12X1.75X20-MM) | |
| 15. | 8T-4183 M | [2] | BOLT (M12X1.75X40-MM) | |
| M | METRIC PART | |||
#SEBP39610269
178-5524: ADJUSTMENT GP-CONSOLE
178-5524 ADJUSTMENT GP-CONSOLE
S/N WBE1-UP
PART OF 161-3759, 204-6974 CONSOLE GP-OPERATOR
S/N WBE1-UP
PART OF 161-3759, 204-6974 CONSOLE GP-OPERATOR
For full view, you need register
Parts for your TK380 WHEEL FELLER BUNCHER:
CATERPILLAR SIS| Pos. | Part No | Qty | Parts name | Comments |
|---|---|---|---|---|
| 1. | 178-5532 | [1] | KNOB | |
| 2. | 178-5630 | [1] | SUPPORT AS | |
| 3. | 178-5633 | [1] | GROMMET | |
| 4. | 178-5634 | [1] | SUPPORT | |
| 5. | 185-8169 | [1] | SHAFT | |
| 6. | 185-8257 | [1] | SUPPORT AS | |
| 7. | 185-8260 | [1] | PIN | |
| 8. | 185-8261 | [1] | LEVER | |
| 9. | 185-8262 | [1] | SPACER (4.2X8X12-MM THK) | |
| 10. | 185-8263 | [1] | SPRING | |
| 11. | 185-8264 | [1] | SPRING | |
| 12. | 185-8265 | [1] | BEARING | |
| 13. | 185-8266 | [1] | SHEET | |
| 14. | 185-8285 | [1] | NUT (PUSH) | |
| 15. | 185-8286 M | [1] | SCREW-MACHINE (M4X0.7X8-MM) | |
| 16. | 185-8287 M | [1] | SCREW-PAN HEAD (M4X0.7X12-MM) | |
| 17. | 095-0736 M | [1] | SCREW-MACHINE (M5X0.8X10-MM) | |
| 18. | 096-0015 | [1] | RING-RETAINING | |
| 19. | 119-5026 | [1] | SCREW-PAN HEAD (10-16X0.63-IN) | |
| 20. | 6V-5210 M | [3] | SCREW-MACHINE (M4X0.7X10-MM) | |
| 21. | 8C-5899 | [1] | PIN-SPRING | |
| 22. | 8T-0328 | [1] | WASHER-HARD (5.5X10X1-MM THK) | |
| 23. | 9X-2042 M | [1] | SCREW-TRUSS HEAD (M6X1X12-MM) | |
| M | METRIC PART | |||
