AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

C-12 Engine for Combat and Tactical Vehicles GEP00001-UP BASIC ENGINE Caterpillar SIS



TRUCK ENGINE C-12 TRUCK ENGINE GEP
 C-12 Engine for Combat and Tactical Vehicles GEP00001-UP SEBP3962 C-12 GEP   (2003)

Parts group C-12:

  For full view, you need register
BASIC ENGINE
AIR COMPRESSOR GP
AIR COMPRESSOR GP
133-7032 AIR COMPRESSOR GP
133-7032 AIR COMPRESSOR GP
S/N GEP1-UP
16.5 CFM, 1.14:1 RATIO
FOR USE WITH @@@@@117-0185@@@@@
AIR COMPRESSOR GP
163-6367 AIR COMPRESSOR GP
163-6367 AIR COMPRESSOR GP
S/N TME1-UP
27.0 CFM AT 1250 RPM
PART OF 175-2173 AIR COMPRESSOR GP
AIR COMPRESSOR GP
164-7564 AIR COMPRESSOR GP
164-7564 AIR COMPRESSOR GP
S/N GEP1-UP
16.5 CFM AT 1250 RPM
PART OF 133-7032 AIR COMPRESSOR GP
AIR COMPRESSOR GP
175-2173 AIR COMPRESSOR GP
175-2173 AIR COMPRESSOR GP
S/N TME1-UP
27 CFM AT 1250 RPM, 1.14:1 RATIO
FOR USE WITH NON-BOOSTED AIR
BELT TIGHTENER GP
BELT TENSIONER GP
174-9326 BELT TENSIONER GP
174-9326 BELT TENSIONER GP
S/N GEP1-UP
ENGINE BRAKE GP
ENGINE BRAKE & MOUNTING GP
132-3175 ENGINE BRAKE & MOUNTING GP
132-3175 ENGINE BRAKE & MOUNTING GP
24 VOLT. DOMED VALVE COVERS
HOUSING GP-ENGINE BRAKE
133-3531 HOUSING GP-ENGINE BRAKE
133-3531 HOUSING GP-ENGINE BRAKE
24 VOLT
PART OF 132-3175 ENGINE BRAKE & MOUNTING GP
CAMSHAFT GP
CAMSHAFT GP
171-3062 CAMSHAFT GP
171-3062 CAMSHAFT GP
CRANKSHAFT GP
CRANKSHAFT GP
197-8425 CRANKSHAFT GP
197-8425 CRANKSHAFT GP
SEAL GP-CRANKSHAFT
148-1355 SEAL GP-CRANKSHAFT
148-1355 SEAL GP-CRANKSHAFT
SEAL GP-CRANKSHAFT
227-0837 SEAL GP-CRANKSHAFT
227-0837 SEAL GP-CRANKSHAFT
PART OF 148-1363 HOUSING GP-FRONT
CYLINDER BLOCK GP
COVER GP-CYLINDER BLOCK
115-2985 COVER GP-CYLINDER BLOCK
115-2985 COVER GP-CYLINDER BLOCK
FOR USE WITH @@@@@117-2786@@@@@, SPIN ON PAPER BYPASS FILTER OR WHEN NO BYPASS FILTER IS USED
CYLINDER BLOCK AS
200-2054 CYLINDER BLOCK AS
200-2054 CYLINDER BLOCK AS
PART OF 204-3449 CYLINDER BLOCK AS
CYLINDER BLOCK AS
204-3449 CYLINDER BLOCK AS
204-3449 CYLINDER BLOCK AS
PART OF 115-2983 CYLINDER BLOCK GP
CYLINDER BLOCK GP
115-2983 CYLINDER BLOCK GP
115-2983 CYLINDER BLOCK GP
PLUG GP-CYLINDER BLOCK
115-2984 PLUG GP-CYLINDER BLOCK
115-2984 PLUG GP-CYLINDER BLOCK
PROVIDES PORT PLUGS FOR THE RIGHT HAND OIL GALLERY
PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK
117-0165 PLUG GP-CYLINDER BLOCK -OIL GALLERY, END
PLUG GP-CYLINDER BLOCK
117-0185 PLUG GP-CYLINDER BLOCK
117-0185 PLUG GP-CYLINDER BLOCK
PROVIDES PLUG FOR 4 CYLINDER AIR COMPRESSOR DRAIN
FOR USE WITH TWO CYLINDER AIR COMPRESSOR
PLUG GP-CYLINDER BLOCK
138-2028 PLUG GP-CYLINDER BLOCK
138-2028 PLUG GP-CYLINDER BLOCK
USE WHEN DIPSTICK IS NOT REQUIRED
CYLINDER HEAD GP
CYLINDER HEAD AS
179-9458 CYLINDER HEAD AS
179-9458 CYLINDER HEAD AS
PART OF 179-9461 CYLINDER HEAD AS, 148-2144 CYLINDER HEAD GP
FIELD REPLACEMENT ORDER @@@@@179-9461@@@@@
CYLINDER HEAD AS
179-9461 CYLINDER HEAD AS
179-9461 CYLINDER HEAD AS
S/N TME1-UP
FIELD REPLACEMENT FOR @@@@@179-9458@@@@@
CYLINDER HEAD GP
132-3208 CYLINDER HEAD GP
132-3208 CYLINDER HEAD GP
CYLINDER HEAD GP
148-2144 CYLINDER HEAD GP
148-2144 CYLINDER HEAD GP
PART OF 132-3208 CYLINDER HEAD GP
FASTENER GP-CYLINDER HEAD
107-5792 FASTENER GP-CYLINDER HEAD
107-5792 FASTENER GP-CYLINDER HEAD
PART OF 132-3175 ENGINE BRAKE & MOUNTING GP
DAMPER GP
DAMPER GP
117-2766 DAMPER GP
117-2766 DAMPER GP
PROVIDES A VISCONIC DAMPER, ADAPTER AND FASTENING HARDWARE TO ATTACH THE DAMPER TO THE ADAPTER.
FOR USE WITH @@@@@110-5115@@@@@, @@@@@180-5168@@@@@
FASTENER GP-DAMPER & PULLEY
180-5168 FASTENER GP-DAMPER & PULLEY
180-5168 FASTENER GP-DAMPER & PULLEY
FOR USE WITH @@@@@155-7898@@@@@, @@@@@110-5115@@@@@, CAST IRON CRANKSHAFT PULLEYS
DRIVE GP-FAN
MOUNTING GP-FAN DRIVE
138-2551 MOUNTING GP-FAN DRIVE
138-2551 MOUNTING GP-FAN DRIVE
ADAPTABLE TO MULTIPLE FAN MOUNTING STUDS
FLYWHEEL GP
FASTENER GP-FLYWHEEL
117-2794 FASTENER GP-FLYWHEEL
117-2794 FASTENER GP-FLYWHEEL
CANNOT BE USED WITH GEAR GP-REAR (RPTO)
GEAR GP
GEAR GP-FRONT
117-2750 GEAR GP-FRONT
117-2750 GEAR GP-FRONT
HOUSING GP-FRONT
148-1363 HOUSING GP-FRONT
148-1363 HOUSING GP-FRONT
HOUSING GP-FLYWHEEL
COVER GP-FLYWHEEL HOUSING
133-1209 COVER GP-FLYWHEEL HOUSING
133-1209 COVER GP-FLYWHEEL HOUSING
S/N GEP1-UP
RIGHT STARTER BORE
Type 1
CANNOT BE USED WITH ELECTRIC STARTING MOTORS
COVER GP-FLYWHEEL HOUSING
133-1209 COVER GP-FLYWHEEL HOUSING
133-1209 COVER GP-FLYWHEEL HOUSING
S/N GEP1-UP
RIGHT STARTER BORE
Type 2
CANNOT BE USED WITH ELECTRIC STARTING MOTORS
HOUSING GP-FLYWHEEL
124-2660 HOUSING GP-FLYWHEEL
124-2660 HOUSING GP-FLYWHEEL
SAE NO. 1 FLYWHEEL HOUSING, VERTICAL ENGINE INSTALLATION ANGLE
FOR USE WITH @@@@@117-2766@@@@@, WET TRANSMISSION
HOUSING GP-FRONT
BRACKET GP-SUPPORT
138-2545 BRACKET GP-SUPPORT
138-2545 BRACKET GP-SUPPORT
PROVIDES "L" BRACKET FOR STIFFENING, WITH RADIATOR SUPPORT HOLES-PETERBILT
COVER GP-FRONT HOUSING
113-8987 COVER GP-FRONT HOUSING
113-8987 COVER GP-FRONT HOUSING
POWER TAKE-OFF
FASTENER GP-FRONT HOUSING
138-2539 FASTENER GP-FRONT HOUSING
138-2539 FASTENER GP-FRONT HOUSING
FOR USE WITH REFRIGERANT COMPRESSOR MOUNTING BRACKET
GEAR GP-FRONT
117-2750 GEAR GP-FRONT
117-2750 GEAR GP-FRONT
HOUSING GP-FRONT
148-1363 HOUSING GP-FRONT
148-1363 HOUSING GP-FRONT
LIFTING GP-ENGINE
LIFTING GP-ENGINE
117-2748 LIFTING GP-ENGINE
117-2748 LIFTING GP-ENGINE
STANDARD
MOUNTING GP-ALTERNATOR
MOUNTING GP-ALTERNATOR
138-2538 MOUNTING GP-ALTERNATOR
138-2538 MOUNTING GP-ALTERNATOR
S/N TME1-UP
PROVIDES REAR SUPPORT BRACKET
MOUNTING GP-ENGINE
SUPPORT GP-ENGINE
115-3004 SUPPORT GP-ENGINE
115-3004 SUPPORT GP-ENGINE
FRONT
4P-9599 SUPPORT-FRONT
4P-9599 SUPPORT-FRONT
FIELD INSTALLATION
PAN GP-OIL
PAN GP-OIL
208-3593 PAN GP-OIL
208-3593 PAN GP-OIL
PARTS GP-MISCELLANEOUS
178-0616 FASTENER GP-ENGINE
178-0616 FASTENER GP-ENGINE
PISTON & ROD GP
PISTON & ROD GP
130-0863 PISTON & ROD GP
130-0863 PISTON & ROD GP
16:1 COMPRESSION RATIO
PULLEY GP
FASTENER GP-DAMPER & PULLEY
180-5168 FASTENER GP-DAMPER & PULLEY
180-5168 FASTENER GP-DAMPER & PULLEY
FOR USE WITH @@@@@155-7898@@@@@, @@@@@110-5115@@@@@, CAST IRON CRANKSHAFT PULLEYS
PULLEY GP-CRANKSHAFT
110-5115 PULLEY GP-CRANKSHAFT
110-5115 PULLEY GP-CRANKSHAFT
S/N GEP1-UP
304.8MM(12 INCH) DIAMETER-12 GR00VE
FOR USE WITH @@@@@180-5168@@@@@
PULLEY GP-CRANKSHAFT
155-7898 PULLEY GP-CRANKSHAFT
155-7898 PULLEY GP-CRANKSHAFT
S/N TME1-UP
304.8MM(12 INCH) DIAMETER-10 GROOVE
FOR USE WITH @@@@@180-5168@@@@@
VALVE MECHANISM GP
LIFTER GP-VALVE
148-2063 LIFTER GP-VALVE
148-2063 LIFTER GP-VALVE -MECHANISM
PART OF 117-2749 VALVE MECHANISM GP
ROCKER ARM GP
115-9397 ROCKER ARM GP
115-9397 ROCKER ARM GP
PART OF 117-2749 VALVE MECHANISM GP
VALVE MECHANISM GP
117-2749 VALVE MECHANISM GP
117-2749 VALVE MECHANISM GP -ENGINE

Information:

(For parts list, see above)

Operation and Maintenance Manual
Air Compressor Filter - Clean/Replace
C-12 Engine
Air Compressor - Check
C-12 Engine
Belt Tensioner - Check
C-12 Engine
Compression Brake
C-12 Engine
Compression Brake - Inspect/Adjust/Replace
C-12 Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Camshafts {1210, 1210}
Reuse and Salvage for Camshafts {1210, 1210}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C-12 Engine
Reuse And Salvage Guidelines
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Operation and Maintenance Manual
Grounding Stud - Inspect/Clean/Tighten
C-12 Engine
Special Instruction
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Technical Information Bulletin
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for Cast Iron Cylinder Blocks {1201, 1201}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Reuse and Salvage for 3176, 3300, 3400 & C-Series Engine Cylinder Blocks {0670, 0672, 0761, 1201, 7225}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reconditioning Procedures of Main Bearing Bores in Cylinder Blocks {1201, 1202, 1224, 1224}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Inspection and Reuse Guideline of Cylinder Liners in Cat Engines {0761, 1201, 1213, 1216, 1216}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Operation and Maintenance Manual
Grounding Stud - Inspect/Clean/Tighten
C-12 Engine
Special Instruction
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Determining the Cause of Fuel Dilution of Engine Oil {1101, 1124, 1251, 1280, 1290}
Tool Operating Manual
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse and Salvage for Cylinder Head Assemblies {1100, 1101, 1103, 1104, 1105, 1106, 1108, 1109, 1115, 1117, 1121, 1124, 1125}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C-12 Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Engine Dampers {1202, 1205}
Reuse and Salvage for Engine Dampers {1202, 1205}
Operation and Maintenance Manual
Fan Drive Bearing - Lubricate
C-12 Engine
Service Magazine
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Engine Storage and Engine Start-Up After Storage {1000, 1300, 1348, 7418}
Reuse And Salvage Guidelines
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Inspection and Reuse of Critical Fasteners Used in All Engines {7553, 7553}
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Flywheel Assemblies {1156}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Reuse and Salvage for Gear Train and Gear Shafts on Engines {0679, 1151, 1162, 1206}
Engine News
Multiple Configurations of Bearing Tab Slots Are Used on Connecting Rods for Certain C10 and C12 Commercial Engines {1218, 1225, 1239}
2012/09/20
Technical Information Bulletin
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Remanufactured Cylinder Packs Contain Improperly Installed Piston Rings for Certain Caterpillar Products{1215, 1239}
Tool Operating Manual
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
Reuse And Salvage Guidelines
Reuse and Salvage for Connecting Rods {1218}
Reuse and Salvage for Connecting Rods {1218}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Inspection Procedures and Specifications for Pistons and Piston Pins {1214, 1214}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Visual Inspection of Main Bearings and Connecting Rod Bearings {1202, 1203, 1225, 1230}
Operation and Maintenance Manual
Crankshaft Vibration Damper - Inspect
C-12 Engine
Reuse And Salvage Guidelines
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Reuse and Salvage for Cast Iron & Steel Pulleys and Stub Shafts {1205, 1207, 1384, 1425}
Special Instruction
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Tool Operating Manual
NEHS0566 <NOBR> 4C-9832</NOBR> Large Engine Roll-Over Stand {0599, 0701}
NEHS0566 4C-9832 Large Engine Roll-Over Stand {0599, 0701}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1111: 368-9910 Multi-Tool Group 3 {0599, 0701, 0702, 0706, 1000, 7610, 7620}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
NEHS1227: 477-3197 C27 Piston Ring Gauge Group {0374, 0599, 0700, 0701, 1214, 1215}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
{0374, 0599, 0629, 0632, 0700, 0701, 1100, 1101}
Reuse And Salvage Guidelines
Reuse and Salvage for Crankshafts {0674, 1202}
Reuse and Salvage for Crankshafts {0674, 1202}
Using the <NOBR> 6V-7840</NOBR> Deck Checking Tool Assembly {0701, 1201, 7225}
Using the 6V-7840 Deck Checking Tool Assembly {0701, 1201, 7225}
Cylinder Block Salvage Procedure Using Belzona&reg; 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Salvage Procedure Using Belzona® 1311 (Ceramic R Metal) {0700, 0701, 1000, 1201}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Cylinder Block Cleaning and Audit Procedure {0644, 0680, 0701}
Service Magazine
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Reuse And Salvage Has Updated Air Inlet Correction Factors for Dynamometer Testing {0769, 1052, 1087}
Operation and Maintenance Manual
Belt Tensioner - Check
C-12 Engine
Belts - Inspect/Adjust/Replace
C-12 Engine
Compression Brake
C-12 Engine
Engine Valve Lash - Check
C-12 Engine
Reuse And Salvage Guidelines
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Reuse & Salvage for Valvetrain Components {1102, 1108, 1109, 1121, 1123}
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.