AVSPARE.COM
parts catalog

424D Backhoe Loader CJZ00001-UP (MACHINE) POWERED BY 3054C Engine POWER TRAIN Caterpillar SIS




Parts group 424D:

  For full view, you need register
POWER TRAIN

Information:

(For parts list, see above)

Special Instruction
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Accumulator Discharging and Charging Procedures {0738, 4263, 4264, 4331, 5077, 5077, 5081, 7474}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Decommissioning Procedure for Permanently Sealed Diaphragm Accumulators {5077}
Operation and Maintenance Manual
Kingpin Bearings (Rear) - Lubricate - All Wheel Steer
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Differential Oil Level (Rear) - Check
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Final Drive Oil (Rear) - Change - All Wheel Steer
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Final Drive Oil Level (Rear) - Check - All Wheel Steer
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Axle Universal Joint (Rear) - Lubricate - All Wheel Steer
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Differential Oil (Front) - Change
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Differential Oil Level (Front) - Check
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Axle Breathers - Clean/Replace
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Differential Oil (Rear) - Change
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Final Drive Oil (Front) - Change
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Final Drive Oil Level (Front) - Check
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Service Letter-NACD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
Service Letter-Australia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
Service Letter-CFEL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
Service Letter-CSARL
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
Service Letter-Americas
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
Technical Information Bulletin
Service Brake Wear on Backhoe Loaders
Service Brake Wear on Backhoe Loaders
Specifications
Axle (Rear)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Service Letter-China
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
Service Letter-Asia
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
Systems Operation
Axle (Rear)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Differential Lock
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Differential (Standard)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Rear)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Service Letter-APD
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AXLE SHAFTS ON CERTAIN 416D, 420D, 430D, 424D, 428D, 432D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
Testing and Adjusting
General Information
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Differential Lock - Adjust
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Axle (Front) - Adjust
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Drive and Steering Axle (Front) - Adjust
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Axle Housing and Bearing Preload - Adjust
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Brake System Air - Purge
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Disassembly and Assembly
Rear Axle - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Rear Axle - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Parking Brake - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Tie Rod (Steering)(Front) - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Drive and Steering Axle Housing (Rear) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Drive and Steering Axle (Rear) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Drive and Steering Axle (Rear) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Service Brake - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Service Brake - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Final Drive (Drive and Steering Axle)(Rear) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Final Drive (Drive and Steering Axle)(Rear) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Service Brake - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Service Brake - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Final Drive (Drive and Steering Axle)(Rear) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Tie Rods (Steering)(Rear) - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Drive and Steering Axle Housing (Rear) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Final Drive (Drive and Steering Axle)(Rear) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Drive and Steering Axle Housing (Rear) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Drive and Steering Axle Housing (Rear) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Rear Axle Housing - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Rear Axle Housing - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Rear Axle Housing - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Rear Axle Housing - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Differential and Pinion (Rear) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Differential and Pinion (Rear) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Differential and Pinion (Rear) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Differential and Pinion (Rear) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Steering Cylinder (Front) - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Service Magazine
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors˜ {3282}
A New Carrier Assembly for the Axle Group Is Now Available on Certain Backhoe Loaders, Pipelayers, Telehandlers, Track-Type Tractors, and Vibratory Soil Compactors˜ {3282}
Systems Operation
Axle (Rear)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Technical Information Bulletin
Service Brake Wear on Backhoe Loaders
Service Brake Wear on Backhoe Loaders
Service Letter-China
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
Service Letter-Asia
Service Letter-APD
Service Magazine
Reuse And Salvage Guidelines
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Specifications
Differential Lock Control
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Systems Operation
Differential Lock
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Testing and Adjusting
Differential Lock - Adjust
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Special Instruction
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Repair Process {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Inspection and Salvage of Hydraulic Cylinder Components {7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Measuring Bores and Installing Seals in Standard and Oversized Hydraulic Cylinders {5100, 7562}
Contamination Control Guidelines
Hydraulic Cylinder Honing {7562}
Hydraulic Cylinder Honing {7562}
Applied Failure Analysis
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Hydraulic Cylinder Seal Failure Analysis {7555, 7562}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Tool Operating Manual
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Testing and Adjusting
Differential Pinion Bearing - Adjust
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Differential Backlash and Bearings - Adjust
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Service Magazine
Operation and Maintenance Manual
Differential Oil Sample (Front) - Obtain
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Differential Oil Sample (Rear) - Obtain
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Differential and Pinion (Rear) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Differential and Pinion (Rear) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Differential and Pinion (Rear) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Differential and Pinion (Rear) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Service Magazine
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
345-1236 Lifting Bracket{0599, 0629, 0632, 6605}
Operation and Maintenance Manual
Transmission Oil - Change
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Transmission Oil Level - Check
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Service Letter-NACD
PRODUCT SUPPORT PROGRAM FOR ADDING A CLIP, BOLT, AND SPACER TO THE TRANSMISSION FILL TUBE ON CERTAIN D-SERIES BACKHOE LOADERS AND D-SERIES INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR ADDING A CLIP, BOLT, AND SPACER TO THE TRANSMISSION FILL TUBE ON CERTAIN D-SERIES BACKHOE LOADERS AND D-SERIES INTEGRATED TOOLCARRIERS
Service Letter-Australia
Service Letter-CFEL
Service Letter-CSARL
Service Letter-Americas
Service Letter-China
Service Letter-Asia
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Letter-APD
PRODUCT SUPPORT PROGRAM FOR ADDING A CLIP, BOLT, AND SPACER TO THE TRANSMISSION FILL TUBE ON CERTAIN D-SERIES BACKHOE LOADERS AND D-SERIES INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR ADDING A CLIP, BOLT, AND SPACER TO THE TRANSMISSION FILL TUBE ON CERTAIN D-SERIES BACKHOE LOADERS AND D-SERIES INTEGRATED TOOLCARRIERS
Operation and Maintenance Manual
Oil Filter - Inspect
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Transmission Oil Filter - Replace
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Service Magazine
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
New Oil Filters for all Cat Machines are Available {3004, 3067, 4295, 431F, 5068}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Special Instruction
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
Hose and Coupling Assembly and Repair Process Guide{0684, 3016, 3103, 3154, 4133, 4257, 4304, 5057, 7554}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
O-Rings - Radial, Fitting Assembly O-Rings and Other O-Ring Applications {0599, 0738, 4000, 4250, 4300, 5050, 5057, 7555}
Reuse And Salvage Guidelines
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Replacing Tubes In Housings That Are Installed With Mechanical Joints (Expanded and Welded) {3016, 3154, 4104, 4133, 5057}
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Special Instruction
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Instructions to Register the Retrofit and Submit Service Reporting {1000, 3000, 7000, 7570}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Service Magazine
Special Instruction
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Tool Operating Manual
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Replacing Sleeve Bearings in Tyrone Gear Pumps and Motors (Used on Series 7 and 8, Iron and Aluminum Housings){0738, 5061, 5073, 7551}
Reuse And Salvage Guidelines
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Repair Process for Hydraulic Gear Pumps {5073}
Repair Process for Hydraulic Gear Pumps {5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 1, 2, and 3) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Specifications and Reusability for Hydraulic Gear Pumps and Motors (Groups 4, 5, and 6) {5061, 5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
Removing and Installing Bushings and Pressure Plates in Hydraulic Gear Pumps {5073}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
General Reuse and Salvage Guideline for Hydraulic Piston Pumps and Motors {5058, 5070}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Thermal Spray Procedures for Tyrone Drive Shaft (Pump Gear){0679, 3066, 5073}
Bench Test Procedures
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Rotating Group Adjustment Instructions for Bosch Rexroth Hydraulic Pumps and Motors {3203, 4351, 5058, 5070}
Bench Test Procedure for Gear Pumps {5073}
Bench Test Procedure for Gear Pumps {5073}
Disassembly and Assembly
Transmission (Direct Drive) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Direct Drive) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Power Shift) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Power Shift) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Power Shift) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Power Shift) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Direct Drive) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Direct Drive) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Special Instruction
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Tool and Specification Chart for Conventional Duo-Cone Seal Groups {0599, 7561}
Service Magazine
Specifications
Drive Shaft
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Disassembly and Assembly
Drive Shaft (Rear) - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Drive Shaft (Front) - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Service Magazine
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Filtration Times for Caterpillar Machine Fluid Compartments{0680, 0738, 0768, 3080, 5050, 5056, 5095}
Truck Engine News
Engine News
Special Instruction
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Hose Inspection Form {0374, 0599, 5057, 5057}
Hose Inspection Form {0374, 0599, 5057, 5057}
Tool Operating Manual
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
Using the 198-4240 Digital Pressure Indicator Group{0599, 0738, 0788, 1000, 3000, 4000, 5000, 6000}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
142-1664 Adjustable Lifting Bracket Group{0599, 0629, 0700, 0729, 0757, 1122}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
Base-Mounted Recirculating Parts Washers{0374, 0599, 0680, 0699, 0700}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
362-0960 Lifting Beam Assembly {0599, 0629, 0700, 0729, 0757, 1122}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
146-1738 Precision Borescope (Hawkeye){0599, 0614, 0644, 0701, 0706, 0708, 0727, 0738}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
TT5000 to TT7000 Torque Turn Wrench Conversion{0374, 0599, 0602, 0677, 79NY}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
420-2048 Adjustable C-Frame Assembly{0629, 0632, 0738, 4000, 5050, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
HVOF Identifier 396-9342 Group{0599, 0669, 0679, 7000}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
4-Inch Radial Hose Machine{0374, 0599, 0684, 0738, 5057}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
142-6893 Adjustable Lifting Bracket Group{0599, 0629, 0632, 0701, 0717, 1000, 4000, 7000}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Procedures for Using the 212-1503 Portable Parts Washer{0374, 0599, 0680, 0699, 0700}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Using the 223-2105 Hose Cutting Machine{0374, 0599, 0678, 0684, 0708, 0738, 5057, 6060}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
Crimping XT-3 ES and XT-5 S4G, MCSH, and MCSX Couplings Using 4C-3660, 4C-5052, 4C-5053, 9U-5792, or 9U-7261 Hose Machines{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
243-0765 Bench Model Hose Machine For Use With the 242-3567 Variable Crimp Die Bowl{0374, 0599, 0684, 0738, 5057}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
Using the 453-3204 Pressure and Temperature Test Group{0374, 0599, 0706, 0708, 0709, 0731, 0732, 0738, 1408, 1439}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
456-4449 Support Device{0374, 0599, 0629, 0632, 0700}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
Installing 457-6030 (C3-290 Controller) on Hose Crimping Machines 233-8048, 286-4354, 286-4355, 275-6199, 286-4353, and 233-8038{0374, 0599, 0684, 0700, 0738, 5057}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
442-1750 Lifting Plate{0374, 0599, 0629, 0632, 0700, 1122}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Base Mounted Recirculating Parts Washers {0374, 0599, 0680, 0699, 0700}
Reuse And Salvage Guidelines
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Contamination Control Guidelines
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Bench Test Procedures
Testing Hydraulic Cylinders Using the <NOBR>188-3926</NOBR> Caterpillar Cylinder Tester and the <NOBR> 9U-6803</NOBR> Caterpillar Cylinder Tester {0784, 7562}
Testing Hydraulic Cylinders Using the 188-3926 Caterpillar Cylinder Tester and the 9U-6803 Caterpillar Cylinder Tester {0784, 7562}
Service Magazine
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Turbine Wheel for Torque Converters Used with Power Shift Transmissions {3101, 3131}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Turbine Wheel {0679, 3101, 3131}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Torque Converter Impeller {0679, 3101, 3134}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Testing and Adjusting
Operational Checks
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Machine Preparation for Troubleshooting
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Power Train Troubleshooting
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Transmission and Torque Converter - Test
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Machine Preparation for Troubleshooting
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Pressure Taps
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Visual Inspection
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Bench Test Procedures
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Service Magazine
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Operation and Maintenance Manual
Transmission Magnetic Screen - Clean
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Transmission Oil - Change
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Transmission Oil Level - Check
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Transmission Oil Sample - Obtain
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Specifications
Torque Converter
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Transmission (Autoshift)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Transmission (Direct Drive) - Two-Wheel Drive
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Tool Operating Manual
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Systems Operation
Torque Converter
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Transmission (Two-Wheel Drive)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Transmission (All-Wheel Drive)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Transmission Hydraulic System
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
General Information
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Torque Converter
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Transmission Hydraulic System
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Transmission
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Identification of Non-Metallic Discs that are Used in Power Shift Transmissions {3030, 3155}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Transmission Clutch Plates and Disc Assemblies with Cellulose Friction Material {3030, 3155, 3190}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Transmission Reuse and Salvage Manual Contents {0374, 3030}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Clutch Ring Gears For All Power Shift Transmissions {3030, 3155}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Procedure to Salvage Tang Slots on Transmission and Brake Pistons {0679, 3160, 4011, 4251}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Repair of Transmission, Torque Converter, and Torque Divider Shafts {3000, 3063, 3100}
Reuse and Salvage of Transmission Components {3030}
Reuse and Salvage of Transmission Components {3030}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission, Torque Converter and Torque Divider Shafts {0679, 0719, 3030, 3101, 3125, 3130}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Testing and Adjusting
Operational Checks
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Machine Preparation for Troubleshooting
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Power Train Troubleshooting
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Transmission and Torque Converter - Test
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Machine Preparation for Troubleshooting
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Visual Inspection
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Operational Checks
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Power Train Troubleshooting
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Pressure Taps
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Pressure Taps
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Visual Inspection
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Transmission and Torque Converter - Test
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Bench Test Procedures
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Disassembly and Assembly
Transmission (Direct Drive) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Direct Drive) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Power Shift) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Power Shift) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Power Shift) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Power Shift) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Direct Drive) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Transmission (Direct Drive) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Service Magazine
Truck Engine News
Engine News
Operation and Maintenance Manual
Differential Oil Sample (Front) - Obtain
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Final Drive Oil Sample (Front) - Obtain
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Final Drive Oil Sample (Rear) - Obtain
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Transmission Oil Sample - Obtain
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Differential Oil Sample (Rear) - Obtain
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Contamination Control Guidelines
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Service Magazine
Reuse And Salvage Guidelines
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Transmission, Torque Converter and Relief Valve Bench Test Procedures Reference Manual Contents {3030, 3101, 3133}
Bench Test Procedures
Specifications
Solenoid Valve (Direct Drive)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Direct Drive)
Solenoid Valve (Autoshift)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Transmission (Autoshift)
Bench Test Procedures
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Bench Test Procedure For A 416C, 416D, 420D, 424D, 426C, 428D, 430D, 432D, 436C, 438D, and 442D Backhoe Loader Transmission (Standard Shift) {3030, 3174}
Disassembly and Assembly
Solenoid Valve (Transmission) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Solenoid Valve (Transmission) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Solenoid Valve (Transmission) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Solenoid Valve (Transmission) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Solenoid Valve (Transmission) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Solenoid Valve (Transmission) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Reuse And Salvage Guidelines
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Operation and Maintenance Manual
Tire Inflation Pressure Adjustment
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Tire Inflation with Air
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Tire Installation
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Tire Inflation - Check
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Tire Shipping Pressure
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Wheel Nut Torque - Check
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Special Instruction
Installation Guide for the Tire Monitoring System on Cat<SUP>&reg;</SUP> and Non-Cat Equipment {4203, 7490}
Installation Guide for the Tire Monitoring System on Cat® and Non-Cat Equipment {4203, 7490}
Rim Inspection Guidelines {4202, 4209}
Rim Inspection Guidelines {4202, 4209}
Specifications
Wheel and Tire (Front)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Wheel and Tire (Rear)
416D, 420D, 424D, 428D, 432D and 442D Backhoe Loaders Axles, Differential and Brakes
Tool Operating Manual
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
193-4124 Rear Wheel Bearing Preload Adjuster for 793 Off-Highway Trucks{0374, 0599, 0700, 0722, 0727, 0731}
Disassembly and Assembly
Tire and Rim (Rear) - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Tire and Rim (Front) - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Tire and Rim (Front) - Remove and Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Service Magazine
Reuse And Salvage Guidelines
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Procedure to Machine Damaged Transmission and Differential Yokes {3030, 3253, 3258}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Thermal Spray Procedures for Transmission and Torque Converter Yokes {0599, 0679, 3001, 3030, 3101, 3160}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Reuse And Salvage Guidelines
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Torque Converter, Divider, Drive Line, and Drive Axle Reuse and Salvage Manual Contents {0374, 3000, 3050, 3100, 3250, 3251, 3253, 3258}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Operation and Maintenance Manual
Final Drive Oil Sample (Front) - Obtain
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Final Drive Oil Sample (Rear) - Obtain
416D, 420D, 424D, 428D, 430D, 432D and 442D Backhoe Loaders
Special Instruction
Installation of Conventional Duo-Cone Seals{7561}
Installation of Conventional Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Installation of Inverted Duo-Cone Seals{7561}
Tool Operating Manual
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
226-2380 Multi-Purpose Lifting Bracket Group{3258, 4050, 4084, 4208, 7561}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
149-7173 Bearing Handling Bracket Assembly {0374, 0599, 0629, 0632, 4006, 4008, 7551}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
127-8458 Final Drive Disassembly and Assembly Bench {0374, 0599, 0722, 0727}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
226-2380 Adjustable C-Hook Extension{0374, 0599, 0632, 0727, 1122, 3258, 4050, 4084, 4208, 7561}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
M0074040: 509-5085 Lifting Tool Assembly {0374, 0599, 0629, 0632, 3023, 3159, 3160, 5363, 7000}
Reuse And Salvage Guidelines
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Reusability of Drive Train Gears {3002, 3159, 3256, 4055}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Specifications for Inspection of Driveline Fasteners {3030, 3101, 3159, 3253, 3258, 3278, 4050}
Contamination Control Guidelines
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Proper Oil Changing Procedures {1000, 1308, 1316, 1325, 1348, 3000, 3004, 3005, 3030, 3064, 3067, 3080, 3081, 4000, 4001, 4050, 4051, 5050, 5056, 5068, 5095}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Obtaining Oil Sample for Analysis {1302, 1348, 3030, 3080, 3278, 4011, 4070, 5050, 5056, 5095, 7542}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Procedure for Filtering Final Drives, Rear Axles, and Differentials on Caterpillar Machines {0680, 0768, 3258, 3260, 4050}
Disassembly and Assembly
Final Drive (Drive and Steering Axle)(Rear) - Remove
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Final Drive (Drive and Steering Axle)(Rear) - Disassemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Final Drive (Drive and Steering Axle)(Rear) - Install
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Final Drive (Drive and Steering Axle)(Rear) - Assemble
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Power Train
Service Magazine

Truck sale:

Call 
2005 CAT 424D

MHS
Midrand, GAUTENG, South Africa
USD $28,284 
2005 CAT 424D

Goodsell Machinery & Hire
Parkes, NSW, Australia
Call 
2001 CAT 424D

CTC Plant
Cape Town, South Africa
USD $45,588 
2004 CAT 424D

Africa Plant
New Castle, KZN, South Africa
 
$56,442 USD 
CATERPILLAR 424D 2004
- BACKHOE LOADERS
METRO MACHINERY CO. LTD.
1760 Sukhumvit Rd., between SOI 52-54 Bang Chak, Phra Khanong -
Back to top
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. CatĀ® and CaterpillarĀ® are registered trademarks of Caterpillar, Inc.