AVSPARE.COM
parts catalog
  1. Home
  2. Caterpillar catalog

222-0365 CONTROL GP-HANDLE -STABILIZER S/N RXA1-UP; CJZ1-UP PART OF 228-5730 CONTROL GP-HYDRAULIC HAND AN ATTACHMENT 424D


OPERATOR STATION
CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC

BACKHOE LOADER 424D BACKHOE LOADER CJZ
 424D Backhoe Loader CJZ00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3968 424D CJZ   (2003)

OPERATOR STATION

CONTROL GP-HANDLE
CONTROL GP-HANDLE
222-0365 CONTROL GP-HANDLE
CONTROL GP-HANDLE
222-9436 CONTROL GP-HANDLE
 

#SEBP39680940
 

222-0365: CONTROL GP-HANDLE

222-0365 CONTROL GP-HANDLE -STABILIZER
S/N RXA1-UP; CJZ1-UP
PART OF 228-5730 CONTROL GP-HYDRAULIC HAND
AN ATTACHMENT
i01854772 SEBP3968
2220365 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4593 [1] BOOT-PROTECTION  
2. 228-4594 [1] CABLE AS  
3. 228-4595 [1] SWITCH AS (STABILIZER UP ALARM)  
4. 228-4596 [1] ROD  
5. 228-4597 [1] CLIP  
6. 228-4592 [1] KNOB  
7. 5C-2890 M [1] NUT (M6X1-THD)  
8. 8T-4742 [1] END-YOKE ROD  
9. 8T-4744 [1] PIN AS-SPRING  
  M   METRIC PART
 

#SEBP39680941
 

222-9436: CONTROL GP-HANDLE

222-9436 CONTROL GP-HANDLE -STABILIZER
S/N RXA1-UP; CJZ1-UP
PART OF 228-5731 CONTROL GP-HYDRAULIC HAND
AN ATTACHMENT
i01854909 SEBP3968
2229436 CONTROL GP-HANDLE Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 228-4593 [1] BOOT-PROTECTION  
2. 228-4594 [1] CABLE AS  
3. 228-4596 [1] ROD  
4. 228-4597 [1] CLIP  
5. 228-4592 [1] KNOB  
6. 5C-2890 M [1] NUT (M6X1-THD)  
7. 8T-4742 [1] END-YOKE ROD  
8. 8T-4744 [1] PIN AS-SPRING  
  M   METRIC PART
 

#SEBP39680942
 

164-1400: CONTROL GP-HYDRAULIC HAND

164-1400 CONTROL GP-HYDRAULIC HAND
S/N RXA1-UP; CJZ1-UP
STANDARD
AN ATTACHMENT
i01401349 SEBP3968
1641400 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [4] BALL JOINT  
2. 8T-4815 [4] ROD END  
3. 9R-9901 [6] FASTENER (CLIP)  
4. 164-1361 [2] BOOT  
5. 164-1371 [1] PLATE  
6. 164-1399 [2] KNOB  
7. 164-1402 [2] SLEEVE  
8. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
9. 164-1406 [4] ROD  
10. 164-1409 [1] LEVER AS (RH)  
11. 164-1411 [1] LEVER AS (LH)  
12. 164-1435 [2] PLATE  
13. 164-1560 [1] TOWER AS  
14. 167-8248 [1] CONSOLE-REAR  
15. 170-6312 [4] BEARING  
16. 179-8235 [4] LOCK PIN  
17. 190-5130 [1] FILM-INSTRUCTION (BACKHOE)  
18. 6V-7744 M [8] LOCKNUT (M10X1.5-THD)  
19. 7X-7729 [8] WASHER (11X25X3-MM THK)  
20. 8C-4987 [4] PIN-CLEVIS  
21. 8T-4121 [8] WASHER-HARD (11X21X2.5-MM THK)  
22. 8T-4133 M [8] NUT (M10X1.5-THD)  
23. 8T-4138 M [6] BOLT (M6X1X20-MM)  
24. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
25. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
26. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
27. 9X-2038 [4] WASHER (7X19X2-MM THK)  
28. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
29. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
  M   METRIC PART
 

#SEBP39680943
 

164-1420: CONTROL GP-HYDRAULIC HAND

164-1420 CONTROL GP-HYDRAULIC HAND
S/N RXA1-UP; CJZ1-UP
EXCAVATOR
PART OF 164-1430 CONVERSION GP-HYD HAND CONTROL
AN ATTACHMENT
i01401328 SEBP3968
1641420 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 9X-8256 [6] WASHER (6.6X12X2-MM THK)  
2. 8T-4773 [10] BALL JOINT  
3. 8T-4815 [2] ROD END  
4. 9R-9901 [6] FASTENER (CLIP)  
5. 142-7405 [2] COLLAR  
6. 164-1361 [2] BOOT  
7. 164-1371 [1] PLATE  
8. 164-1399 [2] KNOB  
9. 164-1402 [2] SLEEVE  
10. 164-1404 [2] SPACER (10.67X16.95X23-MM THK)  
11. 164-1409 [1] LEVER AS (RH)  
12. 164-1411 [1] LEVER AS (LH)  
13. 164-1421 [1] PLATE  
14. 164-1422 [1] SHAFT AS  
15. 164-1425 [1] COUPLER AS  
16. 164-1427 [2] ROD  
17. 164-1429 [1] COUPLER AS  
18. 164-1435 [2] PLATE  
19. 164-1438 [2] ROD  
20. 164-1441 [2] ROD  
21. 164-1560 [1] TOWER AS  
22. 167-8248 [1] CONSOLE-REAR  
23. 170-6312 [4] BEARING  
24. 9R-2807 [2] CLIP (RETAINER)  
25. 190-5128 [1] FILM-INSTRUCTION (EXCAVATOR CONTROL)  
26. 6V-7744 M [14] LOCKNUT (M10X1.5-THD)  
27. 6V-8932 M [2] SETSCREW-SOCKET (M6X1X10-MM)  
28. 7X-7729 [8] WASHER (11X25X3-MM THK)  
29. 9R-2806 [2] PIN  
30. 8T-4121 [20] WASHER-HARD (11X21X2.5-MM THK)  
31. 8T-4133 M [16] NUT (M10X1.5-THD)  
32. 8T-4138 M [6] BOLT (M6X1X20-MM)  
33. 8T-4172 M [2] BOLT (M10X1.5X80-MM)  
34. 8T-4195 M [6] BOLT (M10X1.5X30-MM)  
35. 8T-6466 M [2] BOLT (M10X1.5X60-MM)  
36. 9X-2038 [4] WASHER (7X19X2-MM THK)  
37. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART
 

#SEBP39680944
 

164-1440: CONTROL GP-HYDRAULIC HAND

164-1440 CONTROL GP-HYDRAULIC HAND
S/N RXA1-UP; CJZ1-UP
STANDARD, CROSS
PART OF 164-1450 CONTROL GP-HYDRAULIC HAND
AN ATTACHMENT
i01484462 SEBP3968
1641440 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 8T-4773 [4] BALL JOINT  
2. 8T-4815 [4] ROD END  
3. 9R-9901 [6] FASTENER (CLIP)  
4. 164-1361 [2] BOOT  
5. 164-1371 [1] PLATE  
6. 164-1399 [2] KNOB  
7. 164-1406 [2] ROD  
8. 164-1441 [2] ROD  
9. 164-1447 [1] LEVER AS  
10. 164-1451 [1] BRACKET AS  
11. 164-1452 [1] BRACKET AS  
12. 164-1455 [1] LEVER AS  
13. 164-1565 [1] TOWER AS  
14. 167-8248 [1] CONSOLE-REAR  
15. 179-8235 [4] LOCK PIN  
16. 239-9436 [1] PLATE-WARNING (ALTERNATE PATTERN CONTROL)  
17. 190-5134 [2] FILM-IDENTIFICATION (STD CROSS PATTERN)  
18. 6V-7744 M [4] LOCKNUT (M10X1.5-THD)  
19. 8C-4987 [4] PIN-CLEVIS  
20. 8T-4121 [6] WASHER-HARD (11X21X2.5-MM THK)  
21. 8T-4133 M [8] NUT (M10X1.5-THD)  
22. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
23. 8T-4224 [8] WASHER-HARD (8.8X16X2-MM THK)  
24. 8T-7547 M [8] BOLT (M8X1.25X30-MM)  
25. 9X-2038 [4] WASHER (7X19X2-MM THK)  
26. 9X-2045 M [4] SCREW-TRUSS HEAD (M6X1X20-MM)  
  M   METRIC PART
 

#SEBP39680945
 

164-1450: CONTROL GP-HYDRAULIC HAND

164-1450 CONTROL GP-HYDRAULIC HAND -KIT
S/N RXA1-UP; CJZ1-UP
FOUR TO TWO LEVER, MECHANICAL CONTROLS
AN ATTACHMENT
i01502288 SEBP3968
1641450 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 164-1440 Y [1] CONTROL GP-HYDRAULIC HAND  
  Y   SEPARATE ILLUSTRATION
 

#SEBP39680946
 

183-3120: CONTROL GP-HYDRAULIC HAND

183-3120 CONTROL GP-HYDRAULIC HAND -LOADER SINGLE TILT
S/N RXA1-UP; CJZ1-UP
PART OF 237-9285, 237-9286 CHASSIS AR
i01353436 SEBP3968
1833120 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 B [7] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [3] RING-RETAINING  
3. 3E-3365 [1] WEDGE-RECEPTACLE LOCK (2-PIN)  
4. 5H-3193 [1] PIN-SPRING  
5. 8T-4766 [1] ROD END  
6. 8T-4773 [1] BALL JOINT  
7. 8T-4815 [2] ROD END  
8. 9R-1765 [1] COVER-TOP  
9. 9R-1766 [1] COVER-BOTTOM  
10. 9R-1767 [1] BOOT  
11. 9R-9868 [1] SWITCH GP-PUSH BUTTON (LOADER NEUTRALIZER)  
  186-3735 [2] PIN-CONNECTOR (16-GA TO 18-GA)  
12. 107-5591 [1] NUT-JAM (3/4-16-THD)  
13. 134-0453 M [2] TURNBUCKLE (M10X1.5X50-MM)  
14. 140-6021 [1] PLATE  
15. 164-1368 [8] FASTENER (CLIP)  
16. 164-1369 [1] PLATE  
17. 179-8235 [1] LOCK PIN  
18. 183-3121 [1] BRACKET AS  
19. 183-3122 [1] LEVER AS  
20. 183-3131 [1] DAMPER AS  
  095-9230 [1] PIN-SPRING  
  183-3132 [1] CYLINDER  
21. 183-3135 [1] JOINT AS  
  183-3136 [1] BUSHING  
22. 183-3137 [1] PIN  
23. 183-3153 [1] ROD  
24. 183-3155 [1] ROD  
25. 183-3156 [1] ROD  
26. 201-8069 [1] SEAL  
27. 102-8802 [1] KIT-RECEPTACLE (2-PIN)  
28. 3S-2093 [1] STRAP-CABLE  
29. 6V-7744 M [2] LOCKNUT (M10X1.5-THD)  
30. 8C-4987 [1] PIN-CLEVIS  
31. 8T-4121 [4] WASHER-HARD (11X21X2.5-MM THK)  
32. 8T-4133 M [8] NUT (M10X1.5-THD)  
33. 8T-4136 M [2] BOLT (M10X1.5X25-MM)  
34. 8T-4195 M [2] BOLT (M10X1.5X30-MM)  
35. 8T-4223 [4] WASHER-HARD (13.5X25.5X3-MM THK)  
36. 8T-9501 [2] SCREW (10-16X0.75-IN)  
37. 9R-2807 [1] CLIP (RETAINER)  
38. 9R-3067 [1] PIN  
39. 9X-2065 M [2] NUT (M10X1.5-THD, LH)  
  B   USE AS REQUIRED
  M   METRIC PART
 

#SEBP39680947
 

183-3150: CONTROL GP-HYDRAULIC HAND

183-3150 CONTROL GP-HYDRAULIC HAND -LOADER SINGLE TILT
S/N RXA1-UP; CJZ1-UP
PART OF 186-5333, 186-5334 HYDRAULIC AR
AN ATTACHMENT
i01431216 SEBP3968
1833150 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. 1K-0502 [3] WASHER (16.3X25.4X1.2-MM THK)  
2. 2R-0364 [1] RING-RETAINING  
3. 8T-4773 [1] BALL JOINT  
4. 8T-4815 [1] ROD END  
5. 134-0453 M [1] TURNBUCKLE (M10X1.5X50-MM)  
6. 164-1395 [1] KNOB  
7. 179-8235 [1] LOCK PIN  
8. 183-3151 [1] LEVER AS  
  183-3136 [1] BUSHING  
9. 183-3153 [1] ROD  
10. 183-3156 [1] ROD  
11. 8C-4987 [1] PIN-CLEVIS  
12. 8T-4121 [1] WASHER-HARD (11X21X2.5-MM THK)  
13. 8T-4133 M [3] NUT (M10X1.5-THD)  
14. 9X-2065 M [1] NUT (M10X1.5-THD, LH)  
  M   METRIC PART
 

#SEBP39680948
 

228-5730: CONTROL GP-HYDRAULIC HAND

228-5730 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N RXA1-UP; CJZ1-UP
PART OF 210-8918 STABILIZER AR
AN ATTACHMENT
i01854905 SEBP3968
2285730 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLATE  
2. 210-8917 [2] LEVER GP-CONTROL VALVE (STABILIZER)  
  8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
  134-1374 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
  136-0155 M [1] SETSCREW (M4X0.7X8-MM)  
3. 217-3383 [1] BRACKET AS  
4. 222-0365 Y [2] CONTROL GP-HANDLE  
5. 229-1203 [1] COVER  
6. 129-3178 M [3] LOCKNUT (M6X1-THD)  
7. 5C-2890 M [7] NUT (M6X1-THD)  
8. 5C-9553 M [4] BOLT (M6X1X16-MM)  
9. 5P-4115 [3] WASHER-HARD (7.2X19X2-MM THK)  
10. 7X-0465 M [3] BOLT (M6X1X100-MM)  
11. 8T-4205 [11] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 9X-2043 M [3] SCREW-TRUSS HEAD (M6X1X14-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

#SEBP39680949
 

228-5731: CONTROL GP-HYDRAULIC HAND

228-5731 CONTROL GP-HYDRAULIC HAND -STABILIZER
S/N RXA1-UP; CJZ1-UP
PART OF 210-8919 STABILIZER AR
AN ATTACHMENT
i01854904 SEBP3968
2285731 CONTROL GP-HYDRAULIC HAND Parts scheme
  For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS
Pos. Part No Qty Parts name Comments
1. [1] PLATE  
2. 210-8917 [2] LEVER GP-CONTROL VALVE (STABILIZER)  
  8T-0328 [1] WASHER-HARD (5.5X10X1-MM THK)  
  134-1374 M [1] BOLT-SOCKET HEAD (M5X0.8X20-MM)  
  136-0155 M [1] SETSCREW (M4X0.7X8-MM)  
3. 217-3383 [1] BRACKET AS  
4. 222-9436 Y [2] CONTROL GP-HANDLE  
5. 229-1203 [1] COVER  
6. 129-3178 M [3] LOCKNUT (M6X1-THD)  
7. 5C-2890 M [4] NUT (M6X1-THD)  
8. 5C-9553 M [4] BOLT (M6X1X16-MM)  
9. 5P-4115 [3] WASHER-HARD (7.2X19X2-MM THK)  
10. 7X-0465 M [3] BOLT (M6X1X100-MM)  
11. 8T-4205 [11] WASHER-HARD (7.2X14.5X2-MM THK)  
12. 9X-2043 M [3] SCREW-TRUSS HEAD (M6X1X14-MM)  
  M   METRIC PART
  Y   SEPARATE ILLUSTRATION
 

Information:

Caterpillar Parts SIS Catalog 424D :

CONSOLE GP-SIDE
183-4998 CONSOLE GP-SIDE
CONSOLE GP-SIDE
183-4997 CONSOLE GP-SIDE
CONSOLE GP-SIDE
164-1132 CONSOLE GP-SIDE
CONSOLE GP-SIDE
164-1131 CONSOLE GP-SIDE
CONSOLE GP-OPERATOR
230-7030 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
185-3530 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
185-3524 CONSOLE GP-OPERATOR
CONSOLE GP-OPERATOR
164-1389 CONSOLE GP-OPERATOR
CONTROL GP-HANDLE
222-9436 CONTROL GP-HANDLE
CONTROL GP-HYDRAULIC HAND
164-1400 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
164-1420 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
164-1440 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
164-1450 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
183-3120 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
183-3150 CONTROL GP-HYDRAULIC HAND
CONTROL GP-HYDRAULIC HAND
228-5730 CONTROL GP-HYDRAULIC HAND

Truck sale:

2005 CAT 424D
Call 
2005 CAT 424D

MHS
Midrand, GAUTENG, South Africa
2005 CAT 424D
USD $28,284 
2005 CAT 424D

Goodsell Machinery & Hire
Parkes, NSW, Australia
2001 CAT 424D
Call 
2001 CAT 424D

CTC Plant
Cape Town, South Africa
2004 CAT 424D
USD $45,588 
2004 CAT 424D

Africa Plant
New Castle, KZN, South Africa
 
$56,442 USD 
CATERPILLAR 424D 2004
- BACKHOE LOADERS
METRO MACHINERY CO. LTD.
1760 Sukhumvit Rd., between SOI 52-54 Bang Chak, Phra Khanong -
Back to top
Contacts Request list Affiliate disclosure
The names Cat, Caterpillar, John Deere, Komatsu, Volvo, Hitachi, Doosan, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
AVSpare.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only. Cat® and Caterpillar® are registered trademarks of Caterpillar, Inc.