174-2024 WIPER GP-WINDOW S/N RXA1-UP; CJZ1-UP PART OF 214-6987, 214-6988, 214-6989 CAB AR-ENCLOSED ROPS AN ATTACHMENT 424D

OPERATOR STATION

WIPER GP-WINDOW

0. 174-2024 WIPER GP-W
1. 239-6308 WIPER GP-W

SERVICE EQUIPMENT AND SUPPLIES

CHARTS & FILMS

2. 185-7752 FILM GP
3. 186-6373 FILM GP
4. 217-6835 FILM GP

TOOLS

5. 113-0018 INSTALLATI

WORK TOOLS

BUCKET GP

6. 175-7877 LINK GP-SH

SERVICE EQUIPMENT AND SUPPLIES

PROTECTION GP

7. 134-8204 LOCK GP-VA

CHARTS & FILMS

8. 185-7751 PLATE & FI
9. 238-6700 PLATE & FI
0. INFORMATION

BACKHOE LOADER 424D BACKHOE LOADER CJZ
424D Backhoe Loader CJZ00001-UP (MACHINE) POWERED BY 3054C Engine SEBP3968 424D CJZ (2003)

OPERATOR STATION

WIPER GP-WINDOW

186-2589 MOTOR GP-WINDOW WIPER

174-2024 WIPER GP-WINDOW

239-6308 WIPER GP-WINDOW

#SEBP39681020

174-2024: WIPER GP-WINDOW

WIPER GP-WINDOW

174-2024 WIPER GP-WINDOW
S/N RXA1-UP; CJZ1-UP
PART OF 214-6987, 214-6988, 214-6989 CAB AR-ENCLOSED ROPS
AN ATTACHMENT

i01373801 SEBP3968

For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6K-0806	[1]	STRAP-CABLE
2.	8T-4970 M	[5]	BOLT (M6X1X14-MM)
3.	101-0745	[2]	BLADE AS-WIPER (600-MM)
4.	132-2249	[2]	SPACER (7.4X12.7X24-MM THK)
5.	132-2250	[1]	SPACER (21X35X10-MM THK)
6.	154-5410	[1]	ARM-WINDOW WIPER
7.	174-2025	[1]	MOTOR GP-WINDOW WIPER (REAR)
	186-3735	[4]	PIN-CONNECTOR (16-GA TO 18-GA)
	102-8804	[1]	KIT-RECEPTACLE (4-PIN)
			(INCLUDES RECEPTACLE AS & WEDGE)
8.	174-2026 J	[1]	ARM AS-WIPER
	194-5171 E		HOSE (33-CM)
9.	174-5456	[1]	PLATE
10.	186-2589 Y	[1]	MOTOR GP-WINDOW WIPER (FRONT)
11.	8C-8451 M	[2]	BOLT (M6X1X40-MM)
12.	8T-4205	[7]	WASHER-HARD (7.2X14.5X2-MM THK)

			AVAILABLE REPAIR KIT(S):
	163-4759 J	[1]	KIT-REPAIR (WINDOW WIPER ARM)
	E		ORDER BY THE CENTIMETER
	J		KIT MARKED J AVAILABLE FOR PART MARKED J
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP39681021

239-6308: WIPER GP-WINDOW

WIPER GP-WINDOW

239-6308 WIPER GP-WINDOW
S/N RXA1-UP; CJZ1-UP
PART OF 214-6986 CANOPY AR-OPEN ROPS
AN ATTACHMENT

i02063020 SEBP3968

For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	6K-0806	[1]	STRAP-CABLE
2.	8T-4970 M	[3]	BOLT (M6X1X14-MM)
3.	101-0745	[1]	BLADE AS-WIPER (600-MM)
4.	132-2250	[1]	SPACER (21X35X10-MM THK)
5.	154-5410	[1]	ARM-WINDOW WIPER
6.	186-2589 Y	[1]	MOTOR GP-WINDOW WIPER (FRONT)
7.	8T-4205	[3]	WASHER-HARD (7.2X14.5X2-MM THK)
	M		METRIC PART
	Y		SEPARATE ILLUSTRATION

#SEBP39681022

185-7752: FILM GP

FILM GP

185-7752 FILM GP
S/N CJZ1-UP
NARROW FRAME, SINGLE TILT, ALL WHEEL DRIVE
PART OF 237-9286 CHASSIS AR

i01372203 SEBP3968

For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
Y	[1]	FILM GP

Y		SEPARATE ILLUSTRATION

#SEBP39681023

186-6373: FILM GP

FILM GP

186-6373 FILM GP
S/N RXA1-UP; CJZ1-UP
PART OF 185-7752 FILM GP, 185-7751 PLATE & FILM GP

i01481438 SEBP3968

For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	186-5271	[1]	FILM (424D, RH)
2.	101-0003	[8]	FASTENER
3.	3E-8123	[1]	FILM-IDENTIFICATION (CAT, RH)
4.	3E-8124	[1]	FILM-IDENTIFICATION (CAT, LH)
5.	186-5272	[1]	FILM (424D, LH)

#SEBP39681024

217-6835: FILM GP

FILM GP

217-6835 FILM GP
S/N RXA1-UP; CJZ1-UP
CANNOT BE USED WITH CANOPY OR DELUX CAB
AN ATTACHMENT

i01868095 SEBP3968

For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	110-0037	[1]	FILM (CATERPILLAR, SUN VISOR)

#SEBP39681025

113-0018: INSTALLATION AR-WHEEL CHOCK

INSTALLATION AR-WHEEL CHOCK

113-0018 INSTALLATION AR-WHEEL CHOCK
S/N RXA1-UP; CJZ1-UP
PART OF 206-4924 CONVERSION AR-CERTIFICATION
AN ATTACHMENT

i00526058 SEBP3968

1130018 INSTALLATION AR-WHEEL CHOCK Parts scheme

For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
1.	114-9342	[2]	CHOCK GP-WHEEL
2.	130-7452	[2]	PLATE

#SEBP39681026

175-7877: LINK GP-SHIPPING

LINK GP-SHIPPING

175-7877 LINK GP-SHIPPING
S/N RXA1-UP; CJZ1-UP
PART OF 240-8486, 240-8487, 240-8488, 240-8489, 240-8500, 240-8501, 240-8502, 240-8503 BACKHOE AR-EXTENDABLE STICK, 240-8480, 240-8481, 240-8482, 240-8483, 240-8484, 240-8485, 240-8494, 240-8495, 240-8496, 240-8497, 240-8498, 240-8499 BACKHOE AR-STANDARD STICK
AN ATTACHMENT

i01190768 SEBP3968

For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	120-9286	[1]	PLATE

			PARTS SHOWN IN GRAPHIC(S) WITHOUT A REFERENCE NUMBER ARE NOT SERVICED SEPARATELY

#SEBP39681027

134-8204: LOCK GP-VANDALISM

LOCK GP-VANDALISM

134-8204 LOCK GP-VANDALISM
S/N RXA1-UP; CJZ1-UP
SINGLE TILT
AN ATTACHMENT

i00511482 SEBP3968

For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name
1.	5P-8502	[2]	PADLOCK GP
			(EACH INCLUDES)
	5P-8500	[1]	KEY
	8Y-6364	[1]	SLEEVE

#SEBP39681028

185-7751: PLATE & FILM GP

PLATE & FILM GP

185-7751 PLATE & FILM GP
S/N RXA1-UP
SINGLE TILT, ALL WHEEL DRIVE
PART OF 237-9285 CHASSIS AR

i01397740 SEBP3968

For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS

Pos.	Part No	Qty	Parts name	Comments
	Y	[1]	FILM GP
	Y		SEPARATE ILLUSTRATION

#SEBP39681029

238-6700: PLATE & FILM GP

PLATE & FILM GP

238-6700 PLATE & FILM GP
S/N RXA1-UP; CJZ1-UP
PART OF 237-9285, 237-9286 CHASSIS AR

i01994380 SEBP3968

For full view, you need register

Parts for your 424D BACKHOE LOADER:

CATERPILLAR SIS

Part No	Qty	Parts name
225-4150	[1]	PLATE-SERVICE INFORMATION (MACHINE)
		(CENTERED ON UPPER LH SIDE FRAME RAIL)
239-6989	[1]	PLATE-SERIAL NUMBER (MACHINE)
		(CENTERED ON UPPER RH SIDE FRAME RAIL)
A	[1]	PLATE-SERIAL NUMBER (ENGINE)
		(ON MOUNTING PAD ON LH SIDE OF ENGINE BLOCK)

1P-2807	[4]	FILM-IDENTIFICATION (LIFT EYE LOCATION)
		(APPLY TWO FILMS TO THE FRONT SIDE OF THE FRONT AXLE BETWEEN CHASSIS & WHEEL ASSEMBLY ON LH & RH SIDE OF MACHINE)
101-0333	[1]	FILM-IDENTIFICATION (HYDRAULIC OIL)
		(ON BRAKE FLUID RESERVOIR CAP)
159-8033	[1]	FILM-IDENTIFICATION (12-VOLT)
		(ON INSIDE OF BATTERY BOX DOOR CENTERED ABOVE JUMP START WARNING FILM)
199-6245	[1]	FILM-INFORMATION (WATER SEPARATOR)
		(ON SIDE OF FUEL TANK FROM BOTTOM EDGE 40-MM UP & OVER FROM BACK EDGE 20-MM))
7X-7644	[4]	FILM-IDENTIFICATION (TIE-DOWN)
		(APPLY TWO FILMS, ONE ON EACH SIDE OF THE MACHINE ON THE MAIN FRAME NEAR FRONT AXLE SUPPORT NEXT TO THE TIEDOWN HOLES)
224-9855	[1]	FILM-INSTRUCTION (START AID, READ OMM)
		(ON RIGHT HAND B-POST IN THE FOLLOWING ORDER: UNIVERSAL FILM, SEAT BELT FILM, QUICK COUPLER FILM - IF EQUIPPED, COLD
		START FILM, DECALS MUST BE ALIGNED & EVENLY SPACED)
124-2456	[1]	FILM-INSTRUCTION (NO STEP)
		(ON INSIDE BATTERY BOX DOOR WITH BOTTOM EDGE OF DECAL 90-MM FROM TOP EDGE COVER &
		RIGHT SIDE OF DECAL IS 75-MM FROM RIGHT SIDE OF BOX)
7X-3229	[2]	FILM-IDENTIFICATION (LIFT EYE, TIE-DOWN LOCATION)
		(ON TIE DOWN/SLING EYE BRACKET ON OUTSIDE OF EACH STABILIZER LEG IMMEDIATELY ABOVE TIEDOWN/SLING BRACKET))
	[1]	FILM-NOTICE
		(ON BACK SURFACE OF RH CONSOLE IN SMOOTH AREA WHICH THE DIMENSIONS ARE 205-MM X 95-MM))
239-9441	[1]	FILM-INFORMATION (ROPS, FOPS, READ OMM)
		(ON THE UPPER REAR SHEET METAL PANEL OF CAB STRUCTURE TO THE RH SIDE. DECAL IS LOCATED
		FROM THE BEND IN THE SHEET METAL 50-MM +/-5 TOWARD THE MACHINE CENTERLINE & FROM THE TOP EDGE 50-MM +/-5)
219-0305	[1]	FILM-WARNING (NO WELD, NO DRILL, READ OMM)
		(ON THE UPPER REAR SHEET METAL PANEL OF CAB STRUCTURE TO THE RH SIDE. DECAL IS LOCATED
		FROM THE BEND IN THE SHEET METAL 50-MM +/-5 TOWARD THE MACHINE CENTERLINE & FROM THE TOP EDGE 50-MM +/-5)
225-0312	[1]	FILM-WARNING (JUMP START, READ OMM, INTL)
		(ON INSIDE OF BATTERY BOX DOOR WITH LOWER EDGE OF FILM 75-MM FROM TOP OF DOOR & RIGHT EDGE OF FILM 260-MM FROM RIGHT
		EDGE OF DOOR. ORIENT FILM SUCH THAT IT CAN BE READ WHEN STANDING ON GROUND FACING BATTERY BOX)
226-1240	[1]	FILM-WARNING (CRUSH HAZARD, STAY BACK, INTL)
		(ON BOOM 700-MM +/-5 UP FROM CENTER LINE OF SWING & BOOM LOWER FOOT PIN & 65-MM +/-5 OVER FROM INSIDE OF THE REAR EDGE
		OF BOOM WRAPPER PLATE)
239-9430	[1]	FILM-WARNING (ARM BRACE, READ OMM, INTL)
		(FOR SINGLE TILT MACHINES: ON LEFT HAND SIDE OF THE MACHINE ON LIFT ARM CENTERED ABOVE LIFT ARM SAFETY BRACE UP 25-MM
		FROM BOTTOM EDGE OF LIFT ARM. DECAL TOP BOTTOM EDGE MUST BE PARALLEL WITH & ONE DECAL HEIGHT FROM LIFT ARM BOTTOM EDGE
		FOR PARALLEL LIFT MACHINES: ON LH SIDE OF THE MACHINE ON LIFT ARM)
240-7095	[2]	FILM-WARNING (NO ENTRANCE, EXIT, READ OMM)
		(FOR CENTER PIVOT MACHINES: ON THE CAB STRUCTURE IN THE REAR AT THE BOTTOM 40-MM +/-5 FROM BOTTOM EDGE & 165-MM +/-5
		FROM OUTER EDGE FOR EACH FILM - FOR SIDESHIFT MACHINES: ONE DECAL ON EACH POST ON THE SLIDEFRAME CENTRALIZED &
		25-MM +/-5 DOWN FROM TOP HITCH PLATE)
221-8045	[1]	FILM-WARNING (SEAT BELT, INTERNATIONAL)
		(ON RIGHT HAND B-POST IN THE FOLLOWING ORDER: UNIVERSAL FILM, SEAT BELT FILM, QUICK COUPLER FILM - IF EQUIPPED, COLD
		START FILM, DECALS MUST BE ALIGNED & EVENLY SPACED)
240-7957	[1]	FILM-WARNING (DO NOT OPERATE, READ OMM, INTL)
		(ON RIGHT HAND B-POST IN THE FOLLOWING ORDER: UNIVERSAL FILM, SEAT BELT FILM, QUICK COUPLER FILM - IF EQUIPPED, COLD
		START FILM, DECALS MUST BE ALIGNED & EVENLY SPACED)
225-4257	[2]	FILM-WARNING (HOT FLUID UNDER PRESS)
		(ON BOTH SIDES OF FRONT BAFFLE PLATE ON LH SIDE OF THE MACHINE. LOCATE 35-MM +/-5 FROM BOTTOM OF BAFFLE PLATE &
		65-MM +/-5 FROM SIDE FRAME RAIL)
A		NOT PART OF THIS GROUP